cd11IfVlanPsPacketForwardEnable

CISCO-DOT11-IF-MIB · .1.3.6.1.4.1.9.9.272.1.1.1.10.1.12
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
If both cd11IfVlanSecurityVlanEnabled and this 
object are 'true', PSPF is enabled on VLAN 
cd11IfVlanSecurityVlanId of this radio interface 
and direct traffic between wireless clients of the
VLAn is not allowed.  Otherwise, PSPF is disabled
on the VLAN and direct traffic between wireless
clients of the VLAN is allowed.

Context

MIB
CISCO-DOT11-IF-MIB
OID
.1.3.6.1.4.1.9.9.272.1.1.1.10.1.12
Type
column
Access
readwrite
Status
current
Parent
cd11IfVlanSecurityEntry
Table
cd11IfVlanSecurityTable
Siblings
11

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cd11IfVlanSecurityVlanId
This is the VLAN ID (1-4095) to which the parameters in each conceptual row shall be applied. If the value is '0', these parameters apply to the non-VLAN configuration.
columnCDot11IfVlanIdOrZero.1.3.6.1.4.1.9.9.272.1.1.1.10.1.1
cd11IfVlanWepEncryptMic
If cd11IfVlanEncryptionMode is wep(2) and this object is 'true', MIC will be performed on all data frames on this VLAN. Otherwise, no MIC will be done.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.272.1.1.1.10.1.10
cd11IfVlanWepEncryptKeyHashing
If cd11IfVlanEncryptionMode is wep(2) and this object is 'true', key hashing will be used for encryption. Otherwise, no key hashing will be done.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.272.1.1.1.10.1.11
cd11IfVlanSecurityVlanEnabled
If the value is 'true', this VLAN sub-interface is enabled on all trunk and hybrid ports. If the value is 'false', this VLAN is disabled on all ports. For platforms supporting…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.272.1.1.1.10.1.2
cd11IfVlanBcastKeyChangeInterval
This is the broadcast key rotation period. If the value is '0', there is no key rotation.
columnUnsigned32.1.3.6.1.4.1.9.9.272.1.1.1.10.1.3
cd11IfVlanBcastKeyCapabilChange
If it is 'true', a new key will be used every time when the common set of encryption capability among clients of this radio on this VLAN is changed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.272.1.1.1.10.1.4
cd11IfVlanBcastKeyClientLeave
If it is 'true', a new key will be used every time when a client of the radio on this VLAN disassociates.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.272.1.1.1.10.1.5
cd11IfVlanSecurityCiphers
If cd11IfVlanEncryptionMode is cipher(1), these are all the possible cipher type combinations currently supported for data frame encryption from different IEEE 802.11 radio interf…
columnCDot11IfCipherType.1.3.6.1.4.1.9.9.272.1.1.1.10.1.6
cd11IfVlanSecurityRowStatus
This is used to create a new row, modify or delete an existing VLAN encryption configuration in this table. Creation of rows must be done via 'createAndGo' and cd1…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.272.1.1.1.10.1.7
cd11IfVlanEncryptionMode
Encryption mode this VLANs are: cipher(1) - WPA and Cisco encryptions, wep(2) - WEP Only encryption
columnEnumeration.1.3.6.1.4.1.9.9.272.1.1.1.10.1.8
cd11IfVlanWepEncryptOptions
If cd11IfVlanEncryptionMode is wep(2), mandatory(1) - WEP encryption is mandatory, optional(2) - WEP encryption is option. for all data frames on this VLAN.
columnEnumeration.1.3.6.1.4.1.9.9.272.1.1.1.10.1.9