cd11IfVoipExtensionsEnable
CISCO-DOT11-IF-MIB ·
.1.3.6.1.4.1.9.9.272.1.1.1.1.1.9
Object
This object enables the radio generate proprietary elements in its beacons and probe responses to support Voice-over-IP (VoIP) phones. The default value is 'true'.
Context
- MIB
- CISCO-DOT11-IF-MIB
- OID
.1.3.6.1.4.1.9.9.272.1.1.1.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cd11IfStationConfigEntry
- Table
- cd11IfStationConfigTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cd11IfStationRole This defines the role of this station itself within
the 802.11 BSS of which it is a member. The roles are:
roleWgb(1) - infrastructure type WGB
… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.1 |
| cd11IfDesiredSsidMicAlgorithm This object defines the auxiliary MIC calculated
on WEP-encoded packets of stations associated with
this radio interface through IEEE802dot11-MIB
dot11DesiredSSID. The default… | column | CDot11IfMicAlgorithm | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.10 |
| cd11IfDesiredSsidWepPermuteAlg This object defines the function through which
the WEP encryption key is permuted between key
renewal periods for stations associated with this
radio interface through IEEE802d… | column | CDot11IfWepKeyPermuteAlgorithm | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.11 |
| cd11IfWorldMode This object sets the World-Mode function of the
radio to allow it to function in countries other
than it was manufactured for.
none(1) - No world mode setting,
legacy(2)… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.12 |
| cd11IfWorldModeCountry This object sets the dot11CountryString in the
IEEE802dot11-MIB identifying the country in which
the radio is operating. When cd11IfWorldMode is
either legacy(2) or dot11d(3), … | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.13 |
| cd11IfMobileStationScanParent This object enables the radio to scan for a better
parent when it is a mobile non-root device, for
example, the value of cd11IfStationRole is roleWgb(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.14 |
| cd11IfPsPacketForwardEnable If no VLAN is configured on the radio interface,
this object configures the PSPF feature. Otherwise,
cd11IfVlanPsPacketForwardEnable is used to configure
the PSPF feature per VLAN… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.15 |
| cd11IfMultipleBssidEnable If it is 'true', multiple broadcast SSID is
enabled on the radio. To a wireless client, a
MBSSID AP appears to be several distinct co-located
APs, and it transmits a beacon for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.16 |
| cd11IfMobileStationListIgnore This object indicates whether the radio should
process the AP adjacency and Enhanced Neighbor
List reports specified in the CCX Specification.
AP adjacency and Enhanced Neighbor L… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.17 |
| cd11IfMobileStationScanChannel This object specifies the channels to be used by
the infractructure clients for scanning purposes.
This object is applicable only when the radio's
role as represent… | column | OctetString | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.18 |
| cd11IfCiscoExtensionsEnable Cisco Aironet extensions to the basic IEEE
802.11 protocols are enabled if the value is
'true'. The extension enables better BSS
performance and faster roaming. If the value
i… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.2 |
| cd11IfAllowBroadcastSsidAssoc If the value of cd11IfStationRole is either
'roleRoot' or 'roleRepeater', and if
cd11IfAllowBroadcastSsidAssoc is 'true',
the device radio driver will respond
to Broadcast SSID… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.3 |
| cd11IfPrivacyOptionMaxRate This object specifies the maximum transmit bit
rate supported by the radio when using, for example,
WEP encryption. The rate is expressed in standard
IEEE 802.11 increments of… | column | 500 Kb per second Integer32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.4 |
| cd11IfEthernetEncapsulDefault This object specifies the Ethernet encapsulation
transform type used within the BSS. The encapsulations
allowed are either IEEE 802.1H type or RFC-1042 type.
IEEE 802.1H design… | column | Enumeration | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.5 |
| cd11IfBridgeSpacing If this device is a root wireless bridge,
this value is the distance in kilometers
reported between this device and its
farthest non-root bridge client. | column | Kilometers Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.6 |
| cd11IfDesiredSsidMaxAssocSta This object defines the maximum number of IEEE
802.11 stations which may associate with this radio
interface through IEEE802dot11-MIB dot11DesiredSSID.
If this value is '0', t… | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.7 |
| cd11IfAuxiliarySsidLength This object specifies the maximum number of SSIDs
allowed for a radio interface or the number of SSID
entries per radio interface in the cd11IfAuxSsidTable.
The default value is … | column | Unsigned32 | .1.3.6.1.4.1.9.9.272.1.1.1.1.1.8 |