LINKSYS-WLAN-ACCESS-POINT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
359

apSysConfUserAccountTable

table
.1.3.6.1.4.1.3955.1000.203.1.1.27 · 1 row entry · 5 columns
Open in standard view 
A table of configurable user accounts.
apSysConfUserAccountEntry entry .1.3.6.1.4.1.3955.1000.203.1.1.27.1
A configurable user account entry.
Indexes
apUserIndex
Column Syntax OID
apUserIndex
The user account entry index.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.3955.1000.203.1.1.27.1.1
apUserRowStatus
Status of an entry. Supported values are:

active(1) - Indicates user account is active.
createAndGo(4) - Set to this value to create a user account.
destroy(6) - Set to this value to delete a use…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.1.1.27.1.2
apUserName
The user account entry name.
The name can be up to 32 alphanumeric characters (including '-' and '_').
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.1.1.27.1.3
apUserPassword
The password associated with the user account.
Password contains characters from at least 3
of the following 4 categories: Uppercase letters, Lowercase letters,
Numbers, and Special characters available on a standard ke…
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.3955.1000.203.1.1.27.1.4
apUserType
The user account entry type.
Enumeration
Enumerated Values:
1admin
2guest
 .1.3.6.1.4.1.3955.1000.203.1.1.27.1.5

apLogTable

table
.1.3.6.1.4.1.3955.1000.203.3.2 · 1 row entry · 5 columns
Open in standard view 
Log table to display log messages.
apLogEntry entry .1.3.6.1.4.1.3955.1000.203.3.2.1
Entry in log table.
Indexes
apLogEntryNumber
Column Syntax OID
apLogEntryNumber
Indicates log entry number in the log table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3955.1000.203.3.2.1.1
apLogEntryPriority
Each log entry can have eight possible priorities.
Valid values for priority are debug, info, notice,
warning, error, critical, alert, and emergency.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.3.2.1.2
apLogEntryTime
Indicates the time when log error message was generated.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.3.2.1.3
apLogEntryDaemon
Indicates where system log file is located.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.3.2.1.4
apLogEntryMessage
Log message.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.3.2.1.5

apVapTable

table
.1.3.6.1.4.1.3955.1000.203.4.1 · 1 row entry · 20 columns
Open in standard view 
This table display VAP entries. User can configure sixteen
Virtual Access Points (VAPs) per radio that simulate
multiple APs in one physical access point.
apVapEntry entry .1.3.6.1.4.1.3955.1000.203.4.1.1
Entry in VAP table.
Indexes
apVapId apVapRadio
Column Syntax OID
apVapId
The Vap index associated with VAP.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.1
apVapRadio
The Radio interface index associated with VAP.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.2
apVapStatus
Indicates administrative status of VAP. Set 'up' to enable
specified network. If user disables a network,
VLAN Id is lost.
Enumerationr/w
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3955.1000.203.4.1.1.3
apVapVlanID
VLAN Id associated with VAP.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.3955.1000.203.4.1.1.4
apVapDescription
Human readable description of each VAP.
OctetStringr/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.4.1.1.5
apVapGlobalRadiusMode obsolete
This object is moved to BSS Table and should no longer be used.
Enumeration
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3955.1000.203.4.1.1.6
apVapRedirectMode obsolete
Indicates whether redirect mode is none or http.
Enumerationr/w
Enumerated Values:
1none
2http
 .1.3.6.1.4.1.3955.1000.203.4.1.1.7
apVapRedirectUrl obsolete
The configured redirect URL.
OctetStringr/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.3955.1000.203.4.1.1.8
apVapQosMode
Indicates whether qos mode is enabled or not.
Enumerationr/w
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3955.1000.203.4.1.1.9
apVapDefBwMaxUp
Maximum default bandwidth in up direction in bps.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3955.1000.203.4.1.1.10
apVapDefBwMaxDown
Maximum default bandwidth in down direction in bps.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.3955.1000.203.4.1.1.11
apVapAclTypeUp
Indicates the type of ACL in UP direction.This object must
be set before setting apVapAclUp object.
Enumerationr/w
Enumerated Values:
0none
1ipv4
2ipv6
3mac
 .1.3.6.1.4.1.3955.1000.203.4.1.1.12
apVapAclUp
Human readable name of ACL in UP direction.
It should be one of the names in apQosAclName object.apVapAclTypeUp
object must be set prior to setting this object.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.13
apVapAclTypeDown
Indicates the type of ACL in DOWN direction.
It should be one of the names in apQosAclName object.This object must
be set before setting apVapAclDown object.
Enumerationr/w
Enumerated Values:
0none
1ipv4
2ipv6
3mac
 .1.3.6.1.4.1.3955.1000.203.4.1.1.14
apVapAclDown
Human readable name of ACL in DOWN direction.
It should be one of the names in apQosAclName object.apVapAclTypeDown
object must be set prior to setting this object.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.15
apVapPolicyUp
Human readable name of Diffserv Policy in UP direction.
It should be one of the names in apQosDsPolicyMapName object.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.16
apVapPolicyDown
Human readable name of Diffserv Policy in DOWN direction.
It should be one of the names in apQosDsPolicyMapName object.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.17
apVapSchedulerProfile
Scheduler profile name that is associated with this vap.
This is referenced to the apSchedulerProfileTable.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.4.1.1.18
apVapOperationalStatus
Indicates operational status of VAP. The associated Scheduler profile
apVapSchedulerProfile could affect this field.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3955.1000.203.4.1.1.19
apVapBandSteerMode
Configure band steering on this VAP. To have band steering operationally
enabled, the following conditions should be met:
1. SSIDs on both VAPs should match.
2. One radio should be in the 2.4-GHz band, and the other sho…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.3955.1000.203.4.1.1.20

apIfConfigTable

table
.1.3.6.1.4.1.3955.1000.203.5.1 · 1 row entry · 46 columns
Open in standard view 
A list of interface configuration entries.
apIfConfigEntry entry .1.3.6.1.4.1.3955.1000.203.5.1.1
An entry containing configuration information applicable
to a particular interface.
Indexes
apIfConfigIndex
Column Syntax OID
apIfConfigIndex
Indicates index for the IfConfigTable
Integer32
Constraints:
range: 0-1024
 .1.3.6.1.4.1.3955.1000.203.5.1.1.1
apIfConfigName
Indicates name of interface.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.2
apIfConfigType
Indicates type of interface. Valid values are 'ethernet',
'loopback', 'service-set', 'bridge', 'vlan', and 'wds'.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.3
apIfConfigMacAddress
Indicates MAC Address of the interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.5.1.1.4
apIfConfigStaticIpType
The Internet address type of apIfConfigStaticIp.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.5.1.1.5
apIfConfigStaticIp
IP address that will be used when DHCP server is disabled.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.6
apIfConfigStaticMaskType
The Internet address type of apIfConfigStaticMask.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.5.1.1.7
apIfConfigStaticMask
Netmask that will be used when the DHCP server is disabled.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.8
apIfConfigPathcost
Contribution of this port to the path cost of paths towards
the spanning tree root which include this port. 802.1D-1990
recommends that the default value of this parameter be in
inverse proportion to the speed of the at…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.9
apIfConfigPriority
Interface bridge priority. Only used when STP is enabled.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3955.1000.203.5.1.1.10
apIfConfigSsid
Indicates the Service Set Id (SSID) associated with this
interface. Value can be any string 1 to 32 characters.
ApSsidr/w
Textual Convention: ApSsid OctetString
 .1.3.6.1.4.1.3955.1000.203.5.1.1.11
apIfConfigBss
Indicates the Basic Service Set (BSS) associated with service
set interface. Also serves as an index to the corresponding
apBssTable entry. Valid value is the name of an existing
BSS instance.
ApBssId
Textual Convention: ApBssId OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.3955.1000.203.5.1.1.12
apIfConfigSecurity
Indicates security to use for service-set interface.
Valid values can be 'plainText', 'staticWep', 'dot1x',
'wpaPersonal', and 'wpaEnterprise'.
Enumerationr/w
Enumerated Values:
1plainText
2staticWep
3wpaPersonal
4dot1x
5wpaEnterprise
 .1.3.6.1.4.1.3955.1000.203.5.1.1.13
apIfConfigWpaPersonalKey
Pre-shared key for Wireless Protected Access (WPA) personal.
Only used when security is wpa-personal. Valid value is an
ASCII string between 8 and 63 characters. Personnal Key
can only be set for service-set interface.
OctetStringr/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.3955.1000.203.5.1.1.14
apIfConfigWepKeyAscii
Indicates whether or not the Wired Equivalent Privacy (WEP)
Key is in ASCII or HEX for service-set interfaces.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.5.1.1.15
apIfConfigWepKeyLength
Length of the WEP key for service set interfaces.
The key length values used by the SNMP do not include the
initialization vector in the length. On the web UI,
longer key length values may be shown which include the 24-…
Enumerationr/w
Enumerated Values:
40forty
104onehundredfour
 .1.3.6.1.4.1.3955.1000.203.5.1.1.16
apIfConfigWepDefaultKey
Indicates the WEP key index to use when transmitting.
Only used when security is static-wep. Valid value is a number
between 1 and 4. This field is valid for service-set
interfaces only.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.3955.1000.203.5.1.1.17
apIfConfigWepKey1
Configure WEP key 1 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':

- If Key Length is 40 bits and the Key Type is 'ASC…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.18
apIfConfigWepKey2
Configure WEP key 2 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':

- If Key Length is 40 bits and the Key Type is 'ASC…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.19
apIfConfigWepKey3
Configure WEP key 3 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':

- If Key Length is 40 bits and the Key Type is 'ASC…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.20
apIfConfigWepKey4
Configure WEP key 4 for service set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':

- If Key Length is 40 bits and the Key Type is 'ASC…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.21
apIfConfigRadio
Radio associated with the WDS interface.
Enumerationr/w
Enumerated Values:
1wlan0
2wlan1
 .1.3.6.1.4.1.3955.1000.203.5.1.1.22
apIfConfigRemoteMac
MAC Address of the remote end of the
Wireless Distributed System (WDS) link.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.5.1.1.23
apIfConfigWepKey
Configures WEP key for the WDS link. The number of characters
required for each WEP key depends on how user sets
'Key Length' and 'Key Type':

- If Key Length is 40 bits and the Key Type is 'ASCII',
then…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.5.1.1.24
apIfConfigWdsSsid
SSID for the WDS link. Also serves as an index to the
apSsidTable. SSID should be in the range 1 to 32 characters.
ApSsidr/w
Textual Convention: ApSsid OctetString
 .1.3.6.1.4.1.3955.1000.203.5.1.1.25
apIfConfigWdsSecPolicy
Indicates which security field to use for WDS interfaces. By
default security policy is not configured on WDS interfaces.
Enumerationr/w
Enumerated Values:
1plainText
2staticWep
3wpaPersonal
 .1.3.6.1.4.1.3955.1000.203.5.1.1.26
apIfConfigWdsWpaPskKey
The WDS Wi-Fi Personnal Access(WPA) PSK key. The key is
minimum 8 and upto 63 characters long.
OctetStringr/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.3955.1000.203.5.1.1.27
apIfConfigRxBytes
Indicates received bytes.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.28
apIfConfigRxPackets
Indicates received packets.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.29
apIfConfigRxErrors
Indicates received packets with errors.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.30
apIfConfigTxBytes
Indicates transmitted bytes.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.31
apIfConfigTxPackets
Indicates transmitted packets.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.32
apIfConfigTxErrors
Indicates transmitted packets with errors.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.33
apIfConfigTxDropBytes
Indicates transmitted bytes that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.34
apIfConfigRxDropBytes
Indicates received bytes that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.35
apIfConfigTxDropPackets
Indicates transmitted packets that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.36
apIfConfigRxDropPackets
Indicates received packets that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.37
apIfConfigTsVoTxBytes SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.38
apIfConfigTsViTxBytes SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.39
apIfConfigTsVoRxBytes SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.40
apIfConfigTsViRxBytes SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.41
apIfConfigTsVoTxPackets SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.42
apIfConfigTsViTxPackets SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.43
apIfConfigTsVoRxPackets SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.44
apIfConfigTsViRxPackets SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.5.1.1.45
apIfConfigGreenEthMode
Get/Set the Green ethernet mode to (up/down).
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.5.1.1.46

apRadioTable

table
.1.3.6.1.4.1.3955.1000.203.6.1 · 1 row entry · 39 columns
Open in standard view 
A list of radio configuration entries.
apRadioEntry entry .1.3.6.1.4.1.3955.1000.203.6.1.1
An entry containing configuration information applicable
to a particular radio.
Indexes
apRadioIdentifier
Column Syntax OID
apRadioIdentifier
Unique Radio Id.
ApRadioId
Textual Convention: ApRadioId OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.3955.1000.203.6.1.1.1
apRadioStatus
Administrative status of the radio.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.3955.1000.203.6.1.1.2
apRadioName
Description of the radio.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.1.1.3
apRadioMac
MAC address for the radio.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.6.1.1.4
apRadioMaxBss
Maximum number of BSSes or MAC addresses for this radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.5
apRadioChannelPolicy
Channel selection policy. Valid values are 'static', 'best'.
Enumerationr/w
Enumerated Values:
1static
2best
 .1.3.6.1.4.1.3955.1000.203.6.1.1.6
apRadioMode
Wireless mode for this radio.
Enumerationr/w
Enumerated Values:
1a
2bg
3an
4bgn
5nonlya
6nonlyg
7anac
8nac
 .1.3.6.1.4.1.3955.1000.203.6.1.1.7
apRadioDot11h
Indicates whether or not 802.11h is enabled on this radio.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.8
apRadioDot11d
Indicates whether or not 802.11d is enabled on the radio.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.9
apRadioStaticChannel
Specify static channel for this radio.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.10
apRadioChannel
Channel currently in use on this radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.11
apRadioTxPower
Current transmit power on this radio.
Transmit power is specified in percentage.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.3955.1000.203.6.1.1.12
apRadioBeaconInterval
Base beacon interval for this radio.
Integer32r/w
Constraints:
range: 20-2000
 .1.3.6.1.4.1.3955.1000.203.6.1.1.13
apRadioRtsThreshold
Ready to send (RTS) threshold for this radio.
Integer32r/w
Constraints:
range: 0-2347
 .1.3.6.1.4.1.3955.1000.203.6.1.1.14
apRadioFragThreshold
Minimum packet size for fragmentation.
Integer32r/w
Constraints:
range: 256-2346
 .1.3.6.1.4.1.3955.1000.203.6.1.1.15
apRadioApDetection
Whether or not AP detection is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.16
apRadioStationIsolation
Indicates whether stations are isolated from one another.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.17
apRadioFrequency
Indicates frequency in use on this radio in MHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.18
apRadioWme
Indicates whether Wireless Media Extensions (WME)
is enabled on this AP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.19
apRadioWmeNoAck
Indicates whether 'No-Acknowledge' option of
Wireless Media Extensions (WME) is enabled on this AP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.20
apRadioWmeAPSD
Indicates whether Automatic Power Save Delivery (APSD) option
of Wireless Media Extensions (WME) is enabled on this AP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.21
apRadioRateLimitEnable
Indicates whether broadcast/multicast rate limiting
is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.1.1.22
apRadioRateLimit
Broadcast/multicast rate limit in packets/second.
Integer32r/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.3955.1000.203.6.1.1.23
apRadioRateLimitBurst
Rate limit burst, in packets per second.
Integer32r/w
Constraints:
range: 1-75
 .1.3.6.1.4.1.3955.1000.203.6.1.1.24
apRadioWlanUtil
Indicates WLAN utilization of the radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.25
apRadioChannelBandwidth
The channel bandwidth used for 802.11n, 802.11ac modes of operation.
Enumerationr/w
Enumerated Values:
1twentyMHz
2fortyMHz
3eightyMHz
 .1.3.6.1.4.1.3955.1000.203.6.1.1.26
apRadioPrimaryChannel
The 'primary channel' used in 802.11n 40-MHz channels.
The 'primary channel' is one of the two side-by-side
20-MHz channels which form an 802.11n 40-MHz channel.
Beacon Frames are transmitted by the AP on the 'primary
…
Enumerationr/w
Enumerated Values:
1lower
2upper
 .1.3.6.1.4.1.3955.1000.203.6.1.1.27
apRadioShortGuardIntervalSupported
802.11n allows support for a 'short guard interval'. The
'guard interval' is an amount of 'dead time' between
transmission of symbols. Prior to 802.11n, the inter-symbol
'guard interval' was specified as 800 nanoseconds…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.3955.1000.203.6.1.1.28
apRadioSTBCMode
Space Time Block Coding (STBC) is an 802.11n transmission
technique which improves range and reliability for clients
having a single antenna.
Enumerationr/w
Enumerated Values:
1off
2on
3auto
 .1.3.6.1.4.1.3955.1000.203.6.1.1.29
apRadioProtection
Protection is a mechanism defined in later 802.11 standards
which allow 'legacy' clients/APs to co-exist with the newer
clients/APs without causing interference, etc. By default,
this mechanism is typically turned on. H…
Enumerationr/w
Enumerated Values:
1auto
2off
 .1.3.6.1.4.1.3955.1000.203.6.1.1.30
apRadioFixedMulticastRate
Specify Fixed Multicast Rate for this radio in Mbps.

- For radio modes bg, bgn or nonlyg, valid rates are
auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54.
- For radio modes a, an or nonlya mode, v…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.6.1.1.31
apRadioDtimPeriod
Delivery Traffic Indication Map (DTIM) period for this Radio.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.6.1.1.32
apRadioMaxStations
The maximum number of associations supported.
Integer32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.3955.1000.203.6.1.1.33
apRadioNumAssociatedStations
Indicates total number of stations associated to this radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.1.1.34
apRadioEdcaTemplate
Enables the administrator to set the WMM queue parameters to
predefined values.
Enumerationr/w
Enumerated Values:
1custom
2default
3voiceOptimized
 .1.3.6.1.4.1.3955.1000.203.6.1.1.35
apRadioSchedulerProfile
Scheduler profile name that is associated with the radio.
This is reference to the apSchedulerProfileTable.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3955.1000.203.6.1.1.36
apRadioOperationalStatus
Indicates operational status of Radio. The associated Scheduler profile
apRadioSchedulerProfile could affect this field.
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.3955.1000.203.6.1.1.37
apRadioOperationalChannelBandwidth
The operational channel bandwidth.
Enumeration
Enumerated Values:
1twentyMHz
2fortyMHz
3eightyMHz
 .1.3.6.1.4.1.3955.1000.203.6.1.1.38
apRadioOperationalPrimaryChannel obsolete
The 'Operational primary channel' used in 802.11n 40-MHz channels.
'not applicable' is shown when it is not 40-MHz channel.
The 'primary channel' is one of the two side-by-side
20-MHz channels which form an 802.11n 40-M…
Enumeration
Enumerated Values:
1lower
2upper
3notapplicable
 .1.3.6.1.4.1.3955.1000.203.6.1.1.39

apBssTable

table
.1.3.6.1.4.1.3955.1000.203.6.2 · 1 row entry · 44 columns
Open in standard view 
A list of radio configuration entries.
apBssEntry entry .1.3.6.1.4.1.3955.1000.203.6.2.1
An entry containing configuration information applicable
to a particular Basic Service Set (BSS) Id.
Indexes
apBssIdentifier
Column Syntax OID
apBssIdentifier
Unique Id for this BSS.
ApBssId
Textual Convention: ApBssId OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.1
apBssStatus
Status of this BSS.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.3955.1000.203.6.2.1.2
apBssDescr
Human readable description of this BSS.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.3
apBssRadio
Radio associated with this BSS. Can be used to access
the apRadioTable.
Enumeration
Enumerated Values:
1wlan0
2wlan1
 .1.3.6.1.4.1.3955.1000.203.6.2.1.4
apBssBeaconInterface
Interface used for beacons.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.5
apBssMac
MAC address associated with this BSS.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.6.2.1.6
apBssDtimPeriod obsolete
This object is moved to Radio Table and should no longer be used.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.7
apBssMaxStations obsolete
This object is moved to Radio Table and should no longer be used.
Integer32
Constraints:
range: 0-200
 .1.3.6.1.4.1.3955.1000.203.6.2.1.8
apBssIgnoreBcastSsid
When true, SSIDs are not sent in beacons and
probes are ignored.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.9
apBssMacAclMode
Mode for the MAC access list.
Enumeration
Enumerated Values:
1denyList
2acceptList
 .1.3.6.1.4.1.3955.1000.203.6.2.1.10
apBssMacAclName
MAC ACL name from the existing list of MAC ACL instances.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.11
apBssRadiusAccounting
Indicates whether RADIUS accounting is enabled. User should
disable global radius server mode (object apBssGlobalRadiusMode
under BSS table) to set the RADIUS accounting mode associated
with this BSS. This field is appl…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.12
apBssRadiusIpType
Type of the IP address associated with this BSS.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.13
apBssRadiusPrimaryServerIp
Primary RADIUS server IP address associated with this BSS.
User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IP address associated with this BSS. Thi…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.14
apBssRadiusBackuponeServerIpType
Type of the IP address associated with this BSS.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.15
apBssRadiusBackuponeServerIp
First backup RADIUS server IP address associated with this
BSS. User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IP address associated with this BSS…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.16
apBssRadiusBackuptwoServerIpType
Type of the IP address associated with this BSS.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.17
apBssRadiusBackuptwoServerIp
Second backup RADIUS server IP address associated with this
BSS. User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IP address associated with this BS…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.18
apBssRadiusBackupthreeServerIpType
Type of the IP address associated with this BSS.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.19
apBssRadiusBackupthreeServerIp
Third backup RADIUS server IP address associated with this
BSS. User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IP address associated with this BSS…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.20
apBssRadiusPrimaryServerIPv6Type
The Internet address type of apBssRadiusPrimaryServerIPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.21
apBssRadiusPrimaryServerIPv6
Primary RADIUS IPv6 address associated with this BSS.
User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IPv6 address associated with this BSS. This f…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.22
apBssRadiusBackuponeServerIPv6Type
The Internet address type of apBssRadiusBackuponeServerIPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.23
apBssRadiusBackuponeServerIPv6
First backup RADIUS IPv6 address associated with this BSS.
User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IPv6 address associated with this BSS. T…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.24
apBssRadiusBackuptwoServerIPv6Type
The Internet address type of apBssRadiusBackuptwoServerIPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.25
apBssRadiusBackuptwoServerIPv6
Second backup RADIUS IPv6 address associated with this BSS.
User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IPv6 address associated with this BSS. …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.26
apBssRadiusBackupthreeServerIPv6Type
Internet address type of apBssRadiusBackupthreeServerIPv6.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3955.1000.203.6.2.1.27
apBssRadiusBackupthreeServerIPv6
Third backup RADIUS IPv6 address associated with this BSS.
User should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS
server IPv6 address associated with this BSS. T…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.2.1.28
apBssRadiusCurrentServer
Current RADIUS server is the radius server currently in use.
User can configure this value as primary, backupone, backuptwo
or backupthree. This parameter is not saved across reboots.
This field is always set to prima…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.29
apBssRadiusPrimaryServerKey
Key for communicating with Primary RADIUS server. User should
disable global radius server mode (object apBssGlobalRadiusMode
under BSS table) to configure RADIUS key associated with this
BSS. This field is applicable f…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.30
apBssRadiusBackuponeServerKey
Key for communicating with first backup RADIUS server. User
should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS key
associated with this BSS. This field is applica…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.31
apBssRadiusBackuptwoServerKey
Key for communicating with second backup RADIUS server. User
should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS key
associated with this BSS. This field is applic…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.32
apBssRadiusBackupthreeServerKey
Key for communicating with third backup RADIUS server. User
should disable global radius server mode (object
apBssGlobalRadiusMode under BSS table) to configure RADIUS key
associated with this BSS. This field is applica…
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.6.2.1.33
apBssOpenSystemAuth
Indicates whether Open System authentication is permitted.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.34
apBssSharedKeyAuth
Indicates whether Shared Key authentication is permitted.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.35
apBssWpaCipherTkip
Indicates whether Temporal Key Integral Protocol (TKIP)
is permitted as a WPA cipher.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.36
apBssWpaCipherCcmp
Indicates whether CCMP is permitted as a WPA cipher.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.37
apBssWpaAllowed
Indicates whether WPA is allowed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.38
apBssWpa2Allowed
Indicates whether WPA2 is allowed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.39
apBssRsnPreauth
Indicates whether Robust Secure Network (RSN)
preauthentication is allowed.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.6.2.1.40
apBssBroadcastKeyRefreshRate
Specifies the interval after which the broadcast keys
are changed.
Integer32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.3955.1000.203.6.2.1.41
apBssSessionKeyRefreshRate
Session key refresh rate.The valid range is 30-86400.A value of 0 indicates session key refresh is disabled
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.6.2.1.42
apBssGlobalRadiusMode
Indicates whether global radius server settings are used.
Enumerationr/w
Enumerated Values:
1down
2up
 .1.3.6.1.4.1.3955.1000.203.6.2.1.43
apBssMacAclAuthType
Type to disable, enable and specify a lookup method, for
authentication via client MAC address. Supported types are disable, local, radius
Enumerationr/w
Enumerated Values:
1disable
2local
3radius
 .1.3.6.1.4.1.3955.1000.203.6.2.1.44

apEDCAAPTable

table
.1.3.6.1.4.1.3955.1000.203.6.3 · 1 row entry · 6 columns
Open in standard view 
This table contains the Enhanced Distributed Channel Access (EDCA)
parameters. 'AP' EDCA parameters affect downstream traffic 
from the AP to the client station.
apEDCAAPEntry entry .1.3.6.1.4.1.3955.1000.203.6.3.1
Contains the 'AP' Enhanced Distributed Channel Access (EDCA)
parameters for one radio.
Indexes
apEDCAAPRadioId apEDCAAPQueueId
Column Syntax OID
apEDCAAPRadioId
Unique Radio ID.
ApRadioId
Textual Convention: ApRadioId OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.3955.1000.203.6.3.1.1
apEDCAAPQueueId
ID for this queue.
Enumeration
Enumerated Values:
0voice
1video
2besteffort
3background
 .1.3.6.1.4.1.3955.1000.203.6.3.1.2
apEDCAAPAIFS
Specifies the wait time for data frames in msec.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.6.3.1.3
apEDCAAPMinContentionWindow
Specifies the lower limit of a range from
which the initial random backoff wait time is
determined.
Enumerationr/w
Enumerated Values:
1one
3three
7seven
15fifteen
31thirty-one
63sixty-three
127onetwenty-seven
255twofifty-five
511fivehundred-eleven
1023onethousand-twentythree
 .1.3.6.1.4.1.3955.1000.203.6.3.1.4
apEDCAAPMaxContentionWindow
Specifies the upper limit of a range from
which the initial random backoff wait time is
determined.
Enumerationr/w
Enumerated Values:
1one
3three
7seven
15fifteen
31thirty-one
63sixty-three
127onetwenty-seven
255twofifty-five
511fivehundred-eleven
1023onethousand-twentythree
 .1.3.6.1.4.1.3955.1000.203.6.3.1.5
apEDCAAPMaxBurst
Specifies the maximum burst length (as either an
integer or floating point value) allowed for
packet bursts on the wireless network.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.6.3.1.6

apEDCAStationTable

table
.1.3.6.1.4.1.3955.1000.203.6.4 · 1 row entry · 6 columns
Open in standard view 
This table contains the Enhanced Distributed Channel Access (EDCA)
parameters. 'Station' EDCA parameters affect upstream traffic 
from the client station to an AP.
apEDCAStationEntry entry .1.3.6.1.4.1.3955.1000.203.6.4.1
Contains the Station Enhanced Distributed Channel Access (EDCA)
parameters for one radio.
Indexes
apEDCAStationRadioId apEDCAStationQueueId
Column Syntax OID
apEDCAStationRadioId
Unique Radio ID.
ApRadioId
Textual Convention: ApRadioId OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.3955.1000.203.6.4.1.1
apEDCAStationQueueId
ID for this queue.
Enumeration
Enumerated Values:
0voice
1video
2besteffort
3background
 .1.3.6.1.4.1.3955.1000.203.6.4.1.2
apEDCAStationAIFS
Specifies the wait time for data frames in msec.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.6.4.1.3
apEDCAStationMinContentionWindow
Specifies the lower limit of a range from
which the initial random backoff wait time is
determined.
Enumerationr/w
Enumerated Values:
1one
3three
7seven
15fifteen
31thirty-one
63sixty-three
127onetwenty-seven
255twofifty-five
511fivehundred-eleven
1023onethousand-twentythree
 .1.3.6.1.4.1.3955.1000.203.6.4.1.4
apEDCAStationMaxContentionWindow
Specifies the upper limit of a range from
which the initial random backoff wait time is
determined.
Enumerationr/w
Enumerated Values:
1one
3three
7seven
15fifteen
31thirty-one
63sixty-three
127onetwenty-seven
255twofifty-five
511fivehundred-eleven
1023onethousand-twentythree
 .1.3.6.1.4.1.3955.1000.203.6.4.1.5
apEDCAStationTxOpLimit
Specifies an interval of the time when a Wireless
Multimedia Extensions(WME) client station has the right
to initiate transmissions on to the wireless medium.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.3955.1000.203.6.4.1.6

apAssocTable

table
.1.3.6.1.4.1.3955.1000.203.7.1 · 1 row entry · 26 columns
Open in standard view 
A list of associated Clients on this AP.
apAssociationEntry entry .1.3.6.1.4.1.3955.1000.203.7.1.1
An entry containing the information applicable
to an Associated Client.
Indexes
apAssocStationMac
Column Syntax OID
apAssocStationMac
MAC address of the station associated with this AP.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.7.1.1.1
apAssocInterface
Radio Interface Name on which the client is associated.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.2
apAssocAuthenticated
Indicates whether the Client is authenticated with the AP.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.3955.1000.203.7.1.1.3
apAssocAssociated
Indicates whether the Client is associated with the AP.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.3955.1000.203.7.1.1.4
apAssocRxPackets
Count of packets received by this associated station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.5
apAssocTxPackets
Count of packets transmitted by this associated station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.6
apAssocRxBytes
Count of bytes received by this associated station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.7
apAssocTxBytes
Count of bytes transmitted by this associated station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.8
apAssocListenInterval
Listen Interval.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.9
apAssocLastRssi
Received Signal Strength Indicator of last frame.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.10
apAssocTxDropBytes
Count of bytes transmitted by this associated station
that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.11
apAssocRxDropBytes
Count of bytes received by this associated station
that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.12
apAssocTxDropPackets
Count of packets transmitted by this associated station
that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.13
apAssocRxDropPackets
Count of packets received by this associated station
that were dropped.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.7.1.1.14
apAssocClntQoSStatus
Client QOS Status. Enabled if both, global QOS mode and
QOS mode of the VAP, to which the client is associated
are enabled.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.15
apAssocBwLimitUp
Maximum allowed transmission rate in bits per second (bps)
to the client in client to AP direction.
Integer32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3955.1000.203.7.1.1.16
apAssocBwLimitDown
Maximum allowed transmission rate in bits per second (bps)
to the client in AP to client direction.
Integer32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.3955.1000.203.7.1.1.17
apAssocACLTypeUp
Type of acl applied to the selected client
in client to AP direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.18
apAssocACLUp
Name of acl applied to the selected client
in client to AP direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.19
apAssocACLTypeDown
Type of acl applied to the selected client
in AP to client direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.20
apAssocACLDown
Name of acl applied to the selected client
in AP to client direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.21
apAssocPolicyUp
Diffserv policy applied to the selected client
in client to AP direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.22
apAssocPolicyDown
Diffserv policy applied to the selected client
in AP to client direction.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.23
apAssocTsViolateTxPackets
Count of TS violate packets transmitted by this associated Station.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.7.1.1.24
apAssocTsViolateRxPackets
Count of TS violate packets received by this associated Station.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3955.1000.203.7.1.1.25
apAssocUptime
The time duration for which this station is associated with the AP.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.7.1.1.26

apDetectedApTable

table
.1.3.6.1.4.1.3955.1000.203.8.1 · 1 row entry · 17 columns
Open in standard view 
A list of detected AP entries.
apDetectedApEntry entry .1.3.6.1.4.1.3955.1000.203.8.1.1
An entry containing the information applicable
to a detected Access Point.
Indexes
apDetectedApMac apDetectedRadioName
Column Syntax OID
apDetectedApMac
MAC address of the detected neighbor APs.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.8.1.1.1
apDetectedRadioName
Radio used to scan the detected SSID.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.8.1.1.2
apDetectedApBeaconInterval
Beacon Interval for the detected AP in terms of TU.
TU is measurement of time equal to 1024 micro seconds.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.8.1.1.3
apDetectedApCapability
The capability of the detected AP, represented as a
hexadecimal bitflag. The bit definitions are:
0x0001 - AP
0x0002 - Ad-Hoc
0x0010 - Privacy
0x0020 - Short preamble
0x0100 - Spectrum managemen…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.4
apDetectedApType
The type of device detected.
Values can be AP, Ad hoc, or Other.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.5
apDetectedApPrivacy
Indicates whether privacy (WEP or WPA) is enabled.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.8.1.1.6
apDetectedApSsid
SSID of the AP.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.7
apDetectedApWpa
Whether WPA is enabled on the scanned SSID.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.8.1.1.8
apDetectedApPhyType
Mode the radio was in when the AP was detected.
Note that in B or G mode, it is possible to detect both
B and G APs, therefore the distinction between B and G
is not useful information.
Enumeration
Enumerated Values:
0invalid
1fhssdot1197
2dsssdot1197
3irbaseband
4dsssdot11b
5pbccdot11b
6ofdmdot11g
7pbccdot11g
8ofdmdot11a
255dsssdot11turbog
256dsssdot11turbo
 .1.3.6.1.4.1.3955.1000.203.8.1.1.9
apDetectedApBand
The RF band the AP was detected in.
Values can be 2.4, 5, or 5 Turbo.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.10
apDetectedApChannel
Channel on which the AP is detected.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.8.1.1.11
apDetectedApRate
The basic rate at which the AP sends beacons.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.8.1.1.12
apDetectedApSignal
Signal Strength of the AP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.8.1.1.13
apDetectedApErp
The Extended PHY Rate (ERP) of the detected AP, represented
as a hexadecimal number. The bit definitions are:

0x01 - Non ERP (802.11b) STAs are present in the BSS
0x02 - Use protection m…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.14
apDetectedApBeacons
Counter of Beacons received from this AP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.8.1.1.15
apDetectedApLastBeacon
Time of last beacon received.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.16
apDetectedApSupportedRates
Supported rates of the detected AP.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.8.1.1.17

apRadioBasicRateTable

table
.1.3.6.1.4.1.3955.1000.203.9.1 · 1 row entry · 3 columns
Open in standard view 
A list of basic rates.
apRadioBasicRateEntry entry .1.3.6.1.4.1.3955.1000.203.9.1.1
An entry containing information applicable to
basic rates of a particular radio.
Indexes
apBasicRateRadioName apRadioBasicRate
Column Syntax OID
apBasicRateRadioName
AP radio to which the basic rate applies.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.9.1.1.1
apRadioBasicRate
Basic rate value.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.9.1.1.2
apRadioBasicRateStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- createAndWait (5)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.9.1.1.3

apRadioSuppRateTable

table
.1.3.6.1.4.1.3955.1000.203.9.2 · 1 row entry · 3 columns
Open in standard view 
A list of radio supported rates.
apRadioSuppRateEntry entry .1.3.6.1.4.1.3955.1000.203.9.2.1
An entry containing information applicable to supported rates
of a particular radio.
Indexes
apSuppRateRadioName apRadioSuppRate
Column Syntax OID
apSuppRateRadioName
AP radio to which the supported rate applies.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.9.2.1.1
apRadioSuppRate
Supported rate value.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.9.2.1.2
apRadioSuppRateStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- createAndWait (5)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.9.2.1.3

apRadioMcsIndexTable

table obsolete
.1.3.6.1.4.1.3955.1000.203.9.3 · 1 row entry · 3 columns
Open in standard view 
A list of radio supported MCS Indicies.
apRadioMcsIndexEntry entry .1.3.6.1.4.1.3955.1000.203.9.3.1
An entry containing information applicable to MCS Index
of a particular radio.
Indexes
apMcsIndexRadioName apRadioMcsIndex
Column Syntax OID
apMcsIndexRadioName obsolete
AP radio to which the MCS Index applies.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.9.3.1.1
apRadioMcsIndex obsolete
Supported index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.9.3.1.2
apRadioMcsIndexStatus obsolete
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- createAndWait (5)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, …
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.9.3.1.3

apQosAclTable

table
.1.3.6.1.4.1.3955.1000.203.10.2 · 1 row entry · 3 columns
Open in standard view 
A table of ACL instances.
apQosAclEntry entry .1.3.6.1.4.1.3955.1000.203.10.2.1
An ACL instance entry.
Indexes
apQosAclType apQosAclName
Column Syntax OID
apQosAclType
The type of this IP ACL entry.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.3955.1000.203.10.2.1.1
apQosAclName
The name of this IP ACL entry, which must consist of 1 to 31
alphanumeric characters and uniquely identify this IP ACL.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.3955.1000.203.10.2.1.2
apQosAclStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- destroy (6)

The administrator can only use createAndGo
and destroy. After creating an entry, its status is moved
to active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.2.1.3

apQosAclRuleTable

table
.1.3.6.1.4.1.3955.1000.203.10.3 · 1 row entry · 21 columns
Open in standard view 
A table of IP ACL Rule instances.
apQosAclRuleEntry entry .1.3.6.1.4.1.3955.1000.203.10.3.1
An IP ACL Rule instance entry.
Indexes
apQosAclType apQosAclName apQosAclRuleIndex
Column Syntax OID
apQosAclRuleIndex
The index of this rule instance within an IP ACL.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.3.1.1
apQosAclRuleStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)

The administrator can only use createAndGo and createAndWait.
After creating an entry, its status is moved to active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.3.1.2
apQosAclRuleMatchEvery
Flag to indicate that the ACL rule is defined to match on
every IP packet, regardless of content. If set to true(1), all
other classification field objects in this row are ignored/not set.If
set to false(2),configures t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.3.1.3
apQosAclRuleAction
The type of action this rule should perform.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.3955.1000.203.10.3.1.4
apQosAclRuleProtocol
icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.5
apQosAclRuleSrcIpAddress
The Source IPV4 Address used in the ACL Classification.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.6
apQosAclRuleSrcIpMask
The Source IPV4 Mask used in the ACL Classification.
This mask is expressed using wild-card notation, which
is the ones' complement of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.7
apQosAclRuleSrcL4Port
The Source Port (Layer 4) used in ACL classification.
The following are defined:
ftpdata-20, ftp-21, telnet-23, smtp-25, tftp-69,
http/www-80, snmp-161.All values from 0-65535 are valid.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.3.1.8
apQosAclRuleDstIpAddress
The Destination IPV4 Address used in the ACL Classification.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.9
apQosAclRuleDstIpMask
The Destination IPV4 Mask used in the ACL Classification.
This mask is expressed using wild-card notation, which
is the ones' complement of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binar…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.10
apQosAclRuleDstL4Port
The Destination Port (Layer 4) used in ACL classification.
The following are defined:
ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69,
http/www-80, snmp-161.All values from 0-65535 are valid.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.3.1.11
apQosAclRuleIpTosBits
The Type of Service (TOS) Bits value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP
Differentiated Services Code Point (DSC…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.10.3.1.12
apQosAclRuleIpTosMask
The Type of Service (TOS) Mask value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP
Differentiated Services Code Point (DSC…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.10.3.1.13
apQosAclRuleIpDscp
IP DiffServ Code Point (DSCP) match value for the ACL rule.
The DSCP is defined as the high-order six bits of the
Service Type octet in the IPv4 header.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3955.1000.203.10.3.1.14
apQosAclRuleIpPrecedence
IP Precedence match value for the ACL rule.
The Precedence bits are defined as the high-order three bits
of the Service Type octed in the IPv4 header.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.3.1.15
apQosAclRuleSrcIpv6Address
The Source IPV6 Address used in the ACL Classification.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.16
apQosAclRuleSrcIpv6Prefix
Source IPv6 Prefix Len.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.3955.1000.203.10.3.1.17
apQosAclRuleDstIpv6Address
The Destination IPV6 Address used in the ACL Classification.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.18
apQosAclRuleDstIpv6Prefix
Destination IPv6 Prefix Len.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.3955.1000.203.10.3.1.19
apQosAclRuleIpv6FlowLabel
The IPv6 Flow Label match value for the class. Hex values in
the range of 00000 - FFFFF.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.3.1.20
apQosAclRuleCommit
Flag to indicate that to apply all the rule attributes
created for this row entry. This can be set only once.
Once committed, the rule properties cannot be changed.The
commit value after successful commit is 3.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.3.1.21

apQosDsClassMapTable

table
.1.3.6.1.4.1.3955.1000.203.10.4 · 1 row entry · 29 columns
Open in standard view 
A table of class-map instances.
apQosDsClassMapEntry entry .1.3.6.1.4.1.3955.1000.203.10.4.1
A class-map instance entry.
Indexes
apQosDsClassMapMatchL3Protocol apQosDsClassMapName
Column Syntax OID
apQosDsClassMapName
Name of this class-map entry, which must consist of 1 to 31
alphanumeric characters and uniquely identify this class-map.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.3955.1000.203.10.4.1.1
apQosDsClassMapMatchL3Protocol
The Layer3 protocol match value used for the class.
This will be the type of this class-map.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.3955.1000.203.10.4.1.2
apQosDsClassMapStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, its status is moved
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.4.1.3
apQosDsClassMapMatchEvery
Flag to indicate that match attribute is defined to match on
every IP packet, regardless of content. If set to true(1), all
other classification field objects in this row are ignored/not set.
If set to false(2),configur…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.4.1.4
apQosDsClassMapMatchDstMac
Destination MAC address match value for the class.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.4.1.5
apQosDsClassMapMatchDstMacMask
Destination MAC address mask match value for the class.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.4.1.6
apQosDsClassMapMatchDstIpAddress
The Destination IP Address match value for the class.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.7
apQosDsClassMapMatchDstIpMask
Destination IP address mask match value for the class.
This mask value identifies the portion of
apQosDsClassMapMatchDstIpAddress that is compared against
a packet.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.8
apQosDsClassMapMatchDstL4Port
Destination Port (Layer 4) used in class-map classification.
Different port numbers are:
ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69,
http/www-80, snmp-161.All values from 0-65535 are valid.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.4.1.9
apQosDsClassMapMatchCos
Three-bit user priority field in the 802.1Q tag header
of a tagged Ethernet frame used as a class-match parameter.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.4.1.10
apQosDsClassMapMatchEthertype
The Ethertype match value for the class. Hex values in the
range of 0x0600-0xFFFF. Different ethertype key values are
appletalk(0x02), arp(0x03), ibmsna(0x04), ipv4(0x05), ipv6(0x06),
ipx(0x07), mplsmcast(0x08), mplsuca…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.11
apQosDsClassMapMatchIpTosBits
The Type of Service (TOS) Bits value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP
Differentiated Services Code Point (DSC…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.10.4.1.12
apQosDsClassMapMatchIpTosMask
The Type of Service (TOS) Mask value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP
Differentiated Services Code Point (DSC…
OctetStringr/w .1.3.6.1.4.1.3955.1000.203.10.4.1.13
apQosDsClassMapMatchIpDscp
IP DiffServ Code Point (DSCP) match value for the class.
The DSCP is defined as the high-order six bits of the
Service Type octet in the IPv4 header.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3955.1000.203.10.4.1.14
apQosDsClassMapMatchIpPrecedence
IP Precedence match value for the class.
The Precedence bits are defined as the high-order three bits
of the Service Type octed in the IPv4 header.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.4.1.15
apQosDsClassMapMatchProtocol
icmp - 1
igmp - 2
tcp - 6
udp - 17
All values from 1 to 255 are valid.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.16
apQosDsClassMapMatchSrcMac
Source MAC address match value for the class.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.4.1.17
apQosDsClassMapMatchSrcMacMask
Source MAC address mask match value for the class. This
mask value identifies the portion of
apQosDsClassMapMatchSrcMac that is compared against a packet.
A non-contiguous mask value is permitted.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.4.1.18
apQosDsClassMapMatchSrcIpAddress
The Source IP Address match value for the class.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.19
apQosDsClassMapMatchSrcIpMask
Source IP address mask match value for the class. This
mask value identifies the portion of
apQosDsClassMapMatchSrcIpAddress that is compared against
a packet. A non-contiguous mask value is permitted.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.20
apQosDsClassMapMatchSrcL4Port
Source Port (Layer 4) used in class-map classification.
Different port numbers are:
ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69,
http/www-80, snmp-161.All values from 0-65535 are valid.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.4.1.21
apQosDsClassMapMatchVlanId
Flag to indicate that class map is defined to match Vlan ID.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3955.1000.203.10.4.1.22
apQosDsClassMapMatchFlags
Four byte to indicate the fields set for cos, ethertype,
ip-tos, ip-dscp, ip-precedence. Each bit cos (1),
ethertype (2), ip-tos (4), ip-dscp (8), ip-precedence (16)
represents the corresponding field set.
Other fields …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.4.1.23
apQosDsClassMapMatchSrcIpv6Address
The Source IPv6 Address match value for the class.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.24
apQosDsClassMapMatchSrcIpv6Prefix
The Source IPv6 Prefix length match value for the class.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.3955.1000.203.10.4.1.25
apQosDsClassMapMatchDstIpv6Address
The Destination IPv6 Address match value for the class.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.26
apQosDsClassMapMatchDstIpv6Prefix
Destination IPv6 Prefix length match value for the class.
Integer32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.3955.1000.203.10.4.1.27
apQosDsClassMapMatchIpv6FlowLabel
The IPv6 Flow Label match value for the class.
Hex values in the range of 00000 - FFFFF.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.4.1.28
apQosDsClassMapMatchCommit
Flag to indicate that to apply all the class-map match
attributes created for this row entry. This can be set only
once. A value of 1 indicates commit operation for that
particular class map creation. Once committed, th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.4.1.29

apQosDsPolicyMapTable

table
.1.3.6.1.4.1.3955.1000.203.10.5 · 1 row entry · 2 columns
Open in standard view 
A table of policy-map instances.
apQosDsPolicyMapEntry entry .1.3.6.1.4.1.3955.1000.203.10.5.1
A policy-map instance entry.
Indexes
apQosDsPolicyMapName
Column Syntax OID
apQosDsPolicyMapName
Name of this policy-map entry, which must consist of 1 to 31
alphanumeric characters and uniquely identify this class-map.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.3955.1000.203.10.5.1.1
apQosDsPolicyMapStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, its status is moved
to active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.5.1.2

apQosDsPolicyMapAttrTable

table
.1.3.6.1.4.1.3955.1000.203.10.6 · 1 row entry · 12 columns
Open in standard view 
A table of policy-map match attribute instances.
apQosDsPolicyMapAttrEntry entry .1.3.6.1.4.1.3955.1000.203.10.6.1
A policy-map match attribute instance entry.
Indexes
apQosDsPolicyMapName apQosDsClassMapName apQosDsPolicyMapAttrPoliceSimple apQosDsPolicyMapAttrIndex
Column Syntax OID
apQosDsPolicyMapAttrIndex
Index of this match attribute instance within Diffserv.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.6.1.1
apQosDsPolicyMapAttrPoliceSimple
Flag to indicate if police simple is turned on.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.6.1.2
apQosDsPolicyMapAttrStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, its status is moved
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.6.1.3
apQosDsPolicyMapAttrPolicyActionType
Policy map match entry type. It determines which one of the
individual match conditions is defined for the present
policy map attribute.If not set, error is returned.
Enumeration
Enumerated Values:
1drop
2send
3cos
4ipdscp
5ipprecedence
 .1.3.6.1.4.1.3955.1000.203.10.6.1.4
apQosDsPolicyMapAttrDrop
Flag to indicate that all packets belonging to this
class-instance are dropped. If set, no other action attribute
needs to be configured.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.6.1.5
apQosDsPolicyMapAttrSend
Flag to indicate that all packets belonging to this
class-instance are forwarded. If set, no other action
attribute needs to be configured.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.6.1.6
apQosDsPolicyMapAttrMarkCos
Three-bit user priority field value in the 802.1Q tag header
of a tagged Ethernet frame, marked as part of the policy for a
class instance. If set, no other action attribute needs to be
configured.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.6.1.7
apQosDsPolicyMapAttrMarkIpDscp
Specified IP DSCP value to mark in all packets belonging
to the class-instance. If set, no other action attribute
needs to be configured.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.3955.1000.203.10.6.1.8
apQosDsPolicyMapAttrMarkIpPrecedence
Specified IP Precedence value to mark in all packets
belonging to the class-instance. If set, no other action
attribute needs to be configured.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.6.1.9
apQosDsPolicyMapAttrPoliceSimpleRate
Policy Attribute Rate configured in kbps.
It is used when police simple is turned on.
This property is set only when the property
'apQosDsPolicyMapAttrPoliceSimpleBurstSize'is set,
otherwise the value is neglected.
Unsigned32r/w
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.3955.1000.203.10.6.1.10
apQosDsPolicyMapAttrPoliceSimpleBurstSize
Policy Attribute Burst Size in bytes.
It is used when police simple is turned on.
This property is set only when the property
'apQosDsPolicyMapAttrPoliceSimpleRate'is set,
otherwise the value is neglected.
Integer32r/w
Constraints:
range: 1-204800000
 .1.3.6.1.4.1.3955.1000.203.10.6.1.11
apQosDsPolicyMapAttrCommit
Flag to indicate that to apply all the policy attributes
created for this row entry. This can be set only once.
Once the attributes are committed they cannot be changed
for that particular policy map and class map comb…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.6.1.12

apQosMacAclTable

table
.1.3.6.1.4.1.3955.1000.203.10.7 · 1 row entry · 2 columns
Open in standard view 
A table of MAC-ACL instances.
apQosMacAclEntry entry .1.3.6.1.4.1.3955.1000.203.10.7.1
A MAC-ACL instance entry.
Indexes
apQosMacAclName
Column Syntax OID
apQosMacAclName
Name of this MAC ACL entry, which must consist of 1 to 31
alphanumeric characters and uniquely identify this MAC ACL.
This object must be set to complete a new MAC ACL instance.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.3955.1000.203.10.7.1.1
apQosMacAclStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, its status is moved
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.7.1.2

apQosMacRuleTable

table
.1.3.6.1.4.1.3955.1000.203.10.8 · 1 row entry · 12 columns
Open in standard view 
A table of MAC-ACL rule instances.
apQosMacRuleEntry entry .1.3.6.1.4.1.3955.1000.203.10.8.1
A MAC-ACL rule instance entry.
Indexes
apQosMacAclName apQosMacAclRuleIndex
Column Syntax OID
apQosMacAclRuleIndex
Index of this rule instance within a MAC ACL.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.8.1.1
apQosMacAclRuleStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)

The administrator can only use createAndGo and createAndWait.
After creating an entry, its status is moved to active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.10.8.1.2
apQosMacAclRuleAction
The type of action this rule should perform.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.3955.1000.203.10.8.1.3
apQosMacAclRuleMatchEvery
Flag to indicate that the match attribute is defined to match
on packet, regardless of content. If set to true(1), all other
classification field objects in this row are ignored/not set.If
set to false(2),configures th…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.3955.1000.203.10.8.1.4
apQosMacAclRuleMatchDstMac
Destination MAC address match value for the Rule.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.8.1.5
apQosMacAclRuleMatchDstMacMask
Destination MAC address mask match value for the Rule.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.8.1.6
apQosMacAclRuleMatchCos
Three-bit user priority field in the 802.1Q tag header
of a tagged Ethernet frame used as a rule-match parameter.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.10.8.1.7
apQosMacAclRuleMatchEthertype
The Ethertype match value for the class. Hex values in the
range of 0x0600-0xFFFF. Different ethertype key values are
appletalk(0x02), arp(0x03), ibmsna(0x04), ipv4(0x05), ipv6(0x06),
ipx(0x07), mplsmcast(0x08), mplsuca…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.10.8.1.8
apQosMacAclRuleMatchSrcMac
Source MAC address match value for the rule.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.8.1.9
apQosMacAclRuleMatchSrcMacMask
Source MAC address mask match value for the rule. This mask
value identifies the portion of apQosMacAclRuleMatchSrcMac
that is compared against a packet. A non-contiguous mask
value is permitted.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.10.8.1.10
apQosMacAclRuleMatchVlanId
Flag to indicate that the rule is defined to match Vlan ID.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.3955.1000.203.10.8.1.11
apQosMacAclRuleMatchCommit
Flag to indicate that to apply all the rule match attributes
created for this row entry. This can be set only once.
Once committed, the rule properties cannot be changed.The
commit value after successful commit is 3.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.10.8.1.12

apTspecAcmTable

table
.1.3.6.1.4.1.3955.1000.203.12.1 · 1 row entry · 10 columns
Open in standard view 
TSPEC Admission Control Mandatory (ACM) configuration
parameters.
apTspecAcmEntry entry .1.3.6.1.4.1.3955.1000.203.12.1.1
TSPEC Admission Control Mandatory (ACM) configuration
parameters (per radio).
Indexes
apTspecRadioName
Column Syntax OID
apTspecRadioName
AP radio name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.1.1.1
apTspecStatus
Status of the entry.
Only values active (1), createAndGo (4),
createAndWait (5) and destroy (6) are supported.
The Administrator can only use createAndGo, createAndWait and
destroy. After creating the entry, the stat…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.12.1.1.2
apTspecMode
Overall TSPEC operational mode for the designated apTspecRadioName.
This object must be set to on(1) for any of the other TSPEC ACM
configuration parameters to have an effect. The default value
for this object is off(…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.12.1.1.3
apTspecVoiceAcmMode
Regulates mandatory admission control for the voice
access category (AC). When set to on(1), the
voice AC may only be used by WMM-compliant client
stations that have successfully established a TSPEC
for this AC.
…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.12.1.1.4
apTspecVoiceAcmLimit
Defines the maximum amount of wireless bandwidth utilization to admit
for the voice access category. TSPEC requests that would cause
this limit to be exceeded are rejected.

Note that this value establish…
Integer32r/w
Constraints:
range: 0-70
 .1.3.6.1.4.1.3955.1000.203.12.1.1.5
apTspecVideoAcmMode
Regulates mandatory admission control for the video
access category (AC). When set to on(1), the
voice AC may only be used by WMM-compliant client
stations that have successfully established a TSPEC
for this AC.
…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.12.1.1.6
apTspecVideoAcmLimit
Defines the maximum amount of wireless bandwidth utilization to admit
for the video access category. TSPEC requests that would cause
this limit to be exceeded are rejected.

Note that this value establish…
Integer32r/w
Constraints:
range: 0-70
 .1.3.6.1.4.1.3955.1000.203.12.1.1.7
apTspecApInactivityTimeout
Specifies the amount of time that an active traffic stream (TS)
in the downlink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.

For a bidirectional TS, both the apTs…
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.3955.1000.203.12.1.1.8
apTspecStaInactivityTimeout
Specifies the amount of time that an active traffic stream (TS)
in the uplink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.

For a bidirectional TS, both the apTspe…
Integer32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.3955.1000.203.12.1.1.9
apTspecLegacyWmmQMapMode
When set to on(1), the AP allows intermixing of legacy traffic
with Wi-Fi Multimedia (WMM) traffic on access category
queues that are operating according to admission control
mandatory (ACM) rules.

This m…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3955.1000.203.12.1.1.10

apTspecAcmRadioTable

table
.1.3.6.1.4.1.3955.1000.203.12.3 · 1 row entry · 11 columns
Open in standard view 
TSPEC Admission Control Mandatory (ACM) status
per radio.
apTspecAcmRadioEntry entry .1.3.6.1.4.1.3955.1000.203.12.3.1
An entry for TSPEC Admission Control Mandatory (ACM) status
per radio.
Indexes
apTspecAcmRadioName apTspecAC
Column Syntax OID
apTspecAcmRadioName
AP radio name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.3.1.1
apTspecAC
AP TSPEC access category (AC).
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.3.1.2
apTspecOperStatus
TSPEC operational status per access category.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.3.1.3
apTspecActiveTS
Number of active traffic streams (TSs).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.4
apTspecActiveClients
Number of active clients with at least one traffic stream
on this radio.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.5
apTspecMediumTimeAdmitted
Sum of all medium times currently admitted
for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.6
apTspecMediumTimeUnalloc
Amount of configured medium time that is not allocated
for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.7
apTspecTxBytes
Total bytes transmitted for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.8
apTspecTxPackets
Total packets transmitted for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.9
apTspecRxBytes
Total bytes received for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.10
apTspecRxPackets
Total packets received for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.3.1.11

apTspecAcmVapTable

table
.1.3.6.1.4.1.3955.1000.203.12.4 · 1 row entry · 8 columns
Open in standard view 
TSPEC Admission Control Mandatory (ACM) status
per VAP.
apTspecAcmVapEntry entry .1.3.6.1.4.1.3955.1000.203.12.4.1
An entry for TSPEC Admission Control Mandatory (ACM) status
per VAP.
Indexes
apTspecVapRadioName apTspecVap apTspecVapAC
Column Syntax OID
apTspecVapRadioName
AP radio name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.4.1.1
apTspecVap
Virtual AP name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.4.1.2
apTspecVapAC
AP TSPEC access category (AC).
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.4.1.3
apTspecVapOperStatus
TSPEC operational status per access category.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.4.1.4
apTspecVapActiveTS
Number of active traffic streams (TSs).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.4.1.5
apTspecVapActiveClients
Number of active clients with at least one traffic stream
on this VAP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.4.1.6
apTspecVapMediumTimeAdmitted
Sum of all medium times currently admitted
for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.4.1.7
apTspecVapMediumTimeUnalloc
Amount of configured medium time that is not allocated
for this access category.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3955.1000.203.12.4.1.8

apAssocClientTspecStatusTable

table
.1.3.6.1.4.1.3955.1000.203.12.6.1 · 1 row entry · 11 columns
Open in standard view 
This table contains TSPEC traffic stream status parameters
for clients currently associated with this AP.  Only
clients possessing one or more active traffic streams 
appear in this table.
apAssocClientTspecStatusEntry entry .1.3.6.1.4.1.3955.1000.203.12.6.1.1
Each entry in this table contains TSPEC traffic stream status
parameters for a specific client that is currently associated
with this AP.
Indexes
apAssocClientTspecStationMac apAssocClientTspecTID
Column Syntax OID
apAssocClientTspecStationMac
MAC address of the station associated with this traffic stream.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.1
apAssocClientTspecTID
The traffic stream identifier (TID) indicated in the TSPEC that
defines the traffic stream for the specified access category
for the wireless client. Each traffic stream for a particular
client must have a unique TID i…
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.2
apAssocClientTspecClientMac
MAC address of the client station associated with this traffic stream.
This is the same as apAssocClientTspecStationMac but is
included in this row for display purposes.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.3
apAssocClientTspecACIndex
TSPEC Access Category value (voice or video) for this client session.
TspecSuppAC
Textual Convention: TspecSuppAC Enumeration
Type Values:
0voice
1video
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.4
apAssocClientTspecDirection
The direction of the client traffic stream (TS) as indicated
in the TSPEC. An uplink(1) TS monitors data traffic flowing
from client station to AP, while a downlink(2) TS pertains to
the opposite direction. A bidirec…
Enumeration
Enumerated Values:
1uplink
2downlink
3bidirectional
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.5
apAssocClientTspecUserPriority
The user priority indicated in the TSPEC that defines
the traffic stream for the specified access category
for the wireless client. QoS Data frames to/from the client
containing this user priority are categorized as be…
Unsigned32
Textual Convention: CISCO-ATM-SWITCH-CUG-MIBUnsigned32 Unsigned32
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.6
apAssocClientTspecMediumTime
Indicates the amount of time this client is allowed to access
the wireless medium each second for the specified access category through
this traffic stream. This value is calculated by the AP based
on various parameter…
Unsigned32
Textual Convention: CISCO-ATM-SWITCH-CUG-MIBUnsigned32 Unsigned32
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.7
apAssocClientTspecExcessUsageEvents
The number of times the wireless client has appreciably exceeded
the medium time established for its TSPEC. The actual measure
of 'appreciably exceeded' is implementation-dependent, but it is
not necessarily a sing…
Unsigned32
Textual Convention: CISCO-ATM-SWITCH-CUG-MIBUnsigned32 Unsigned32
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.8
apAssocClientTspecInterface
Radio interface name on which the client is associated.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.9
apAssocClientTspecBSSID
MAC address of the Virtual AP associated with this TSPEC.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.10
apAssocClientTspecSSID
SSID for the TSPEC client.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3955.1000.203.12.6.1.1.11

apAssocClientTspecStatisticsTable

table
.1.3.6.1.4.1.3955.1000.203.12.6.2 · 1 row entry · 4 columns
Open in standard view 
This table contains TSPEC traffic stream statistics
for clients currently associated with this AP.  Only
clients possessing one or more active traffic streams 
appear in this table.
apAssocClientTspecStatisticsEntry entry .1.3.6.1.4.1.3955.1000.203.12.6.2.1
Each entry in this table contains TSPEC traffic stream statistics
for a specific client that is currently associated with this
AP.
Indexes
apAssocClientTspecStationMac apAssocClientTspecTID
Column Syntax OID
apAssocClientTspecPktsRecvd
Total packets received from the client station for the
traffic stream belonging to the specified access category.

This object is only valid when the apAssociatedClientTspecDirection
is either uplink(1) …
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3955.1000.203.12.6.2.1.1
apAssocClientTspecPktsTransmitted
Total packets transmitted to the client station for the
traffic stream belonging to the specified access category.

This object is only valid when the apAssociatedClientTspecDirection
is either downlink(…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3955.1000.203.12.6.2.1.2
apAssocClientTspecBytesRecvd
Total bytes received from the client station for the
traffic stream belonging to the specified access category.

This object is only valid when the apAssociatedClientTspecDirection
is either uplink(1) or…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3955.1000.203.12.6.2.1.3
apAssocClientTspecBytesTransmitted
Total bytes transmitted to the client station for the
traffic stream belonging to the specified access category.

This object is only valid when the apAssociatedClientTspecDirection
is either downlink(2)…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3955.1000.203.12.6.2.1.4

apSystemTimeZoneTable

table
.1.3.6.1.4.1.3955.1000.203.15.2 · 1 row entry · 2 columns
Open in standard view 
This table represents the time zone list.
apSystemTimeZoneEntry entry .1.3.6.1.4.1.3955.1000.203.15.2.1
Each entry in this table represents a supported time zone.
Indexes
apSystemTimeZoneIndex
Column Syntax OID
apSystemTimeZoneIndex
Time Zone index.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.3955.1000.203.15.2.1.1
apSystemTimeZoneList
Time Zone List.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.15.2.1.2

apSchedulerProfileTable

table
.1.3.6.1.4.1.3955.1000.203.17.2.1 · 1 row entry · 3 columns
Open in standard view 
The Scheduler Profile table for profile entries. Can configure 
up to 16 Profiles and each profile is associated with a set of rules 
defined in apSchedulerProfileRuleTable table.
apSchedulerProfileEntry entry .1.3.6.1.4.1.3955.1000.203.17.2.1.1
Entry in scheduler profile table.
Indexes
apSchedulerProfileIndex apSchedulerProfileName
Column Syntax OID
apSchedulerProfileIndex
The Scheduler profile index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3955.1000.203.17.2.1.1.1
apSchedulerProfileName
The Scheduler profile name.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3955.1000.203.17.2.1.1.2
apSchedulerProfileRowStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- createAndWait (5)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.17.2.1.1.3

apSchedulerProfileRuleTable

table
.1.3.6.1.4.1.3955.1000.203.17.2.2 · 1 row entry · 6 columns
Open in standard view 
The Scheduler Profile Rule table for rule entries. Can configure 
up to 16 rules and each rule is associated with a profile  
defined in apSchedulerProfileTable table.
apSchedulerProfileRuleEntry entry .1.3.6.1.4.1.3955.1000.203.17.2.2.1
Entry in scheduler rule table.
Indexes
apSchedulerProfileRuleIndex apSchedulerProfileRuleNum
Column Syntax OID
apSchedulerProfileRuleIndex
The Scheduler profile index. This is reference to
the apSchedulerProfileTable.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.1
apSchedulerProfileRuleNum
The Scheduler rule number. Index for this table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.2
apSchedulerProfileDay
Defines the week of the day for the rule. The rule is applied
on the specified day (or days).
Enumerationr/w
Enumerated Values:
1monday
2tuesday
3wednesday
4thursday
5friday
6saturday
7sunday
8daily
9weekday
10weekend
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.3
apSchedulerStartTime
Defines the start time of the rule. The format is HH:MM with
hour between 0 to 24 and minute between 0 to 59.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.4
apSchedulerEndTime
Defines the end time of the rule. The format is HH:MM with
hour between 0 to 24 and minute between 0 to 59.
OctetStringr/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.5
apSchedulerProfileRuleRowStatus
Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
- createAndWait (5)
- destroy (6)

The administrator can only use createAndGo, createAndWait,
and destroy. After creating an entry, …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3955.1000.203.17.2.2.1.6