apIfConfigWepKey
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.5.1.1.24
Object
column
r/w
OctetString
Configures WEP key for the WDS link. The number of characters
required for each WEP key depends on how user sets
'Key Length' and 'Key Type':
- If Key Length is 40 bits and the Key Type is 'ASCII',
then each WEP key be 5 characters long.
- If Key Length is 40 bits and Key Type is 'Hex',
then each WEP key must be 10 characters long.
- If Key Length is 104 bits and Key Type is 'ASCII',
then each WEP Key must be 13 characters long.
- If Key Length is 104 bits and Key Type is 'Hex',
then each WEP Key must be 26 characters long.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.5.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- apIfConfigEntry
- Table
- apIfConfigTable
- Siblings
- 45
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apIfConfigIndex Indicates index for the IfConfigTable | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.1 |
| apIfConfigPriority Interface bridge priority. Only used when STP is enabled. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.10 |
| apIfConfigSsid Indicates the Service Set Id (SSID) associated with this
interface. Value can be any string 1 to 32 characters. | column | ApSsid | .1.3.6.1.4.1.3955.1000.203.5.1.1.11 |
| apIfConfigBss Indicates the Basic Service Set (BSS) associated with service
set interface. Also serves as an index to the corresponding
apBssTable entry. Valid value is the name of an existing
… | column | ApBssId | .1.3.6.1.4.1.3955.1000.203.5.1.1.12 |
| apIfConfigSecurity Indicates security to use for service-set interface.
Valid values can be 'plainText', 'staticWep', 'dot1x',
'wpaPersonal', and 'wpaEnterprise'. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.5.1.1.13 |
| apIfConfigWpaPersonalKey Pre-shared key for Wireless Protected Access (WPA) personal.
Only used when security is wpa-personal. Valid value is an
ASCII string between 8 and 63 characters. Personnal Key
can… | column | OctetString | .1.3.6.1.4.1.3955.1000.203.5.1.1.14 |
| apIfConfigWepKeyAscii Indicates whether or not the Wired Equivalent Privacy (WEP)
Key is in ASCII or HEX for service-set interfaces. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.5.1.1.15 |
| apIfConfigWepKeyLength Length of the WEP key for service set interfaces.
The key length values used by the SNMP do not include the
initialization vector in the length. On the web UI,
longer key length v… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.5.1.1.16 |
| apIfConfigWepDefaultKey Indicates the WEP key index to use when transmitting.
Only used when security is static-wep. Valid value is a number
between 1 and 4. This field is valid for service-set
interfac… | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.17 |
| apIfConfigWepKey1 Configure WEP key 1 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':
- If Key Le… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.18 |
| apIfConfigWepKey2 Configure WEP key 2 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':
- If Key Le… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.19 |
| apIfConfigName Indicates name of interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.2 |
| apIfConfigWepKey3 Configure WEP key 3 for service-set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':
- If Key Le… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.20 |
| apIfConfigWepKey4 Configure WEP key 4 for service set interfaces. The number of
characters required for each WEP key depends on how user sets
'Key Length' and 'Key Type':
- If Key Le… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.21 |
| apIfConfigRadio Radio associated with the WDS interface. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.5.1.1.22 |
| apIfConfigRemoteMac MAC Address of the remote end of the
Wireless Distributed System (WDS) link. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3955.1000.203.5.1.1.23 |
| apIfConfigWdsSsid SSID for the WDS link. Also serves as an index to the
apSsidTable. SSID should be in the range 1 to 32 characters. | column | ApSsid | .1.3.6.1.4.1.3955.1000.203.5.1.1.25 |
| apIfConfigWdsSecPolicy Indicates which security field to use for WDS interfaces. By
default security policy is not configured on WDS interfaces. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.5.1.1.26 |
| apIfConfigWdsWpaPskKey The WDS Wi-Fi Personnal Access(WPA) PSK key. The key is
minimum 8 and upto 63 characters long. | column | OctetString | .1.3.6.1.4.1.3955.1000.203.5.1.1.27 |
| apIfConfigRxBytes Indicates received bytes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.28 |
| apIfConfigRxPackets Indicates received packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.29 |
| apIfConfigType Indicates type of interface. Valid values are 'ethernet',
'loopback', 'service-set', 'bridge', 'vlan', and 'wds'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.3 |
| apIfConfigRxErrors Indicates received packets with errors. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.30 |
| apIfConfigTxBytes Indicates transmitted bytes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.31 |
| apIfConfigTxPackets Indicates transmitted packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.32 |
| apIfConfigTxErrors Indicates transmitted packets with errors. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.33 |
| apIfConfigTxDropBytes Indicates transmitted bytes that were dropped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.34 |
| apIfConfigRxDropBytes Indicates received bytes that were dropped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.35 |
| apIfConfigTxDropPackets Indicates transmitted packets that were dropped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.36 |
| apIfConfigRxDropPackets Indicates received packets that were dropped. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.37 |
| apIfConfigTsVoTxBytes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.38 |
| apIfConfigTsViTxBytes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.39 |
| apIfConfigMacAddress Indicates MAC Address of the interface. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3955.1000.203.5.1.1.4 |
| apIfConfigTsVoRxBytes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.40 |
| apIfConfigTsViRxBytes | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.41 |
| apIfConfigTsVoTxPackets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.42 |
| apIfConfigTsViTxPackets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.43 |
| apIfConfigTsVoRxPackets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.44 |
| apIfConfigTsViRxPackets | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.45 |
| apIfConfigGreenEthMode Get/Set the Green ethernet mode to (up/down). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.5.1.1.46 |
| apIfConfigStaticIpType The Internet address type of apIfConfigStaticIp. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.5.1.1.5 |
| apIfConfigStaticIp IP address that will be used when DHCP server is disabled. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.5.1.1.6 |
| apIfConfigStaticMaskType The Internet address type of apIfConfigStaticMask. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3955.1000.203.5.1.1.7 |
| apIfConfigStaticMask Netmask that will be used when the DHCP server is disabled. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.5.1.1.8 |
| apIfConfigPathcost Contribution of this port to the path cost of paths towards
the spanning tree root which include this port. 802.1D-1990
recommends that the default value of this parameter be in
i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.5.1.1.9 |