apDetectedApPhyType

LINKSYS-WLAN-ACCESS-POINT-MIB · .1.3.6.1.4.1.3955.1000.203.8.1.1.9
MIB view Table view

Object

column Enumeration 
Mode the radio was in when the AP was detected. 
Note that in B or G mode, it is possible to detect both
B and G APs, therefore the distinction between B and G
is not useful information.

Context

MIB
LINKSYS-WLAN-ACCESS-POINT-MIB
OID
.1.3.6.1.4.1.3955.1000.203.8.1.1.9
Type
column
Access
readonly
Status
current
Parent
apDetectedApEntry
Table
apDetectedApTable
Siblings
16

Syntax

Enumeration

Values & Constraints

Enumerated Values
0invalid
1fhssdot1197
2dsssdot1197
3irbaseband
4dsssdot11b
5pbccdot11b
6ofdmdot11g
7pbccdot11g
8ofdmdot11a
255dsssdot11turbog
256dsssdot11turbo

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
apDetectedApMac
MAC address of the detected neighbor APs.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3955.1000.203.8.1.1.1
apDetectedApBand
The RF band the AP was detected in. Values can be 2.4, 5, or 5 Turbo.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.10
apDetectedApChannel
Channel on which the AP is detected.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.8.1.1.11
apDetectedApRate
The basic rate at which the AP sends beacons.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.8.1.1.12
apDetectedApSignal
Signal Strength of the AP.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.8.1.1.13
apDetectedApErp
The Extended PHY Rate (ERP) of the detected AP, represented as a hexadecimal number. The bit definitions are: 0x01 - Non ERP (802.11b) STAs are present in …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.14
apDetectedApBeacons
Counter of Beacons received from this AP.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.8.1.1.15
apDetectedApLastBeacon
Time of last beacon received.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.16
apDetectedApSupportedRates
Supported rates of the detected AP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.17
apDetectedRadioName
Radio used to scan the detected SSID.
columnOctetString.1.3.6.1.4.1.3955.1000.203.8.1.1.2
apDetectedApBeaconInterval
Beacon Interval for the detected AP in terms of TU. TU is measurement of time equal to 1024 micro seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.8.1.1.3
apDetectedApCapability
The capability of the detected AP, represented as a hexadecimal bitflag. The bit definitions are: 0x0001 - AP 0x0002 - Ad-Hoc 0x0010 - Privacy 0x0020 - Short p…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.4
apDetectedApType
The type of device detected. Values can be AP, Ad hoc, or Other.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.5
apDetectedApPrivacy
Indicates whether privacy (WEP or WPA) is enabled.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.8.1.1.6
apDetectedApSsid
SSID of the AP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.8.1.1.7
apDetectedApWpa
Whether WPA is enabled on the scanned SSID.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.8.1.1.8