apQosAclRuleSrcIpAddress
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.10.3.1.6
Object
The Source IPV4 Address used in the ACL Classification.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.10.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- apQosAclRuleEntry
- Table
- apQosAclRuleTable
- Siblings
- 20
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apQosAclRuleIndex The index of this rule instance within an IP ACL. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.1 |
| apQosAclRuleDstIpMask The Destination IPV4 Mask used in the ACL Classification.
This mask is expressed using wild-card notation, which
is the ones' complement of traditional Subnet Masks.
Here, the 'D… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.10.3.1.10 |
| apQosAclRuleDstL4Port The Destination Port (Layer 4) used in ACL classification.
The following are defined:
ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69,
http/www-80, snmp-161.All value… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.11 |
| apQosAclRuleIpTosBits The Type of Service (TOS) Bits value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP … | column | OctetString | .1.3.6.1.4.1.3955.1000.203.10.3.1.12 |
| apQosAclRuleIpTosMask The Type of Service (TOS) Mask value. By definition,
the high-order three bits represent the IP precedence value,
whereas alternatively the high-order six bits represent the IP … | column | OctetString | .1.3.6.1.4.1.3955.1000.203.10.3.1.13 |
| apQosAclRuleIpDscp IP DiffServ Code Point (DSCP) match value for the ACL rule.
The DSCP is defined as the high-order six bits of the
Service Type octet in the IPv4 header. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.14 |
| apQosAclRuleIpPrecedence IP Precedence match value for the ACL rule.
The Precedence bits are defined as the high-order three bits
of the Service Type octed in the IPv4 header. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.15 |
| apQosAclRuleSrcIpv6Address The Source IPV6 Address used in the ACL Classification. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.10.3.1.16 |
| apQosAclRuleSrcIpv6Prefix Source IPv6 Prefix Len. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.17 |
| apQosAclRuleDstIpv6Address The Destination IPV6 Address used in the ACL Classification. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.10.3.1.18 |
| apQosAclRuleDstIpv6Prefix Destination IPv6 Prefix Len. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.19 |
| apQosAclRuleStatus Status of an entry. Supported values are:
- active (1)
- createAndGo (4)
The administrator can only use createAndGo and createAndWait.
After creating an entry, its… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3955.1000.203.10.3.1.2 |
| apQosAclRuleIpv6FlowLabel The IPv6 Flow Label match value for the class. Hex values in
the range of 00000 - FFFFF. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.10.3.1.20 |
| apQosAclRuleCommit Flag to indicate that to apply all the rule attributes
created for this row entry. This can be set only once.
Once committed, the rule properties cannot be changed.The
commit val… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.21 |
| apQosAclRuleMatchEvery Flag to indicate that the ACL rule is defined to match on
every IP packet, regardless of content. If set to true(1), all
other classification field objects in this row are ignored… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.10.3.1.3 |
| apQosAclRuleAction The type of action this rule should perform. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.10.3.1.4 |
| apQosAclRuleProtocol icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.5 |
| apQosAclRuleSrcIpMask The Source IPV4 Mask used in the ACL Classification.
This mask is expressed using wild-card notation, which
is the ones' complement of traditional Subnet Masks.
Here, the 'Don't c… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.10.3.1.7 |
| apQosAclRuleSrcL4Port The Source Port (Layer 4) used in ACL classification.
The following are defined:
ftpdata-20, ftp-21, telnet-23, smtp-25, tftp-69,
http/www-80, snmp-161.All values from 0-65535 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.10.3.1.8 |
| apQosAclRuleDstIpAddress The Destination IPV4 Address used in the ACL Classification. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3955.1000.203.10.3.1.9 |