apRadioOperationalPrimaryChannel
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.6.1.1.39
Object
column
obsolete
Enumeration
The 'Operational primary channel' used in 802.11n 40-MHz channels. 'not applicable' is shown when it is not 40-MHz channel. The 'primary channel' is one of the two side-by-side 20-MHz channels which form an 802.11n 40-MHz channel. Beacon Frames are transmitted by the AP on the 'primary channel' and legacy stations (non-802.11n) communicate with the AP over the 'primary channel'.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.6.1.1.39- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- apRadioEntry
- Table
- apRadioTable
- Siblings
- 38
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | lower |
2 | upper |
3 | notapplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apRadioIdentifier Unique Radio Id. | column | ApRadioId | .1.3.6.1.4.1.3955.1000.203.6.1.1.1 |
| apRadioStaticChannel Specify static channel for this radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.10 |
| apRadioChannel Channel currently in use on this radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.11 |
| apRadioTxPower Current transmit power on this radio.
Transmit power is specified in percentage. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.12 |
| apRadioBeaconInterval Base beacon interval for this radio. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.13 |
| apRadioRtsThreshold Ready to send (RTS) threshold for this radio. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.14 |
| apRadioFragThreshold Minimum packet size for fragmentation. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.15 |
| apRadioApDetection Whether or not AP detection is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.16 |
| apRadioStationIsolation Indicates whether stations are isolated from one another. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.17 |
| apRadioFrequency Indicates frequency in use on this radio in MHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.18 |
| apRadioWme Indicates whether Wireless Media Extensions (WME)
is enabled on this AP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.19 |
| apRadioStatus Administrative status of the radio. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.2 |
| apRadioWmeNoAck Indicates whether 'No-Acknowledge' option of
Wireless Media Extensions (WME) is enabled on this AP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.20 |
| apRadioWmeAPSD Indicates whether Automatic Power Save Delivery (APSD) option
of Wireless Media Extensions (WME) is enabled on this AP. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.21 |
| apRadioRateLimitEnable Indicates whether broadcast/multicast rate limiting
is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.22 |
| apRadioRateLimit Broadcast/multicast rate limit in packets/second. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.23 |
| apRadioRateLimitBurst Rate limit burst, in packets per second. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.24 |
| apRadioWlanUtil Indicates WLAN utilization of the radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.25 |
| apRadioChannelBandwidth The channel bandwidth used for 802.11n, 802.11ac modes of operation. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.26 |
| apRadioPrimaryChannel The 'primary channel' used in 802.11n 40-MHz channels.
The 'primary channel' is one of the two side-by-side
20-MHz channels which form an 802.11n 40-MHz channel.
Beacon Frames ar… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.27 |
| apRadioShortGuardIntervalSupported 802.11n allows support for a 'short guard interval'. The
'guard interval' is an amount of 'dead time' between
transmission of symbols. Prior to 802.11n, the inter-symbol
'guard in… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.28 |
| apRadioSTBCMode Space Time Block Coding (STBC) is an 802.11n transmission
technique which improves range and reliability for clients
having a single antenna. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.29 |
| apRadioName Description of the radio. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.6.1.1.3 |
| apRadioProtection Protection is a mechanism defined in later 802.11 standards
which allow 'legacy' clients/APs to co-exist with the newer
clients/APs without causing interference, etc. By default,
… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.30 |
| apRadioFixedMulticastRate Specify Fixed Multicast Rate for this radio in Mbps.
- For radio modes bg, bgn or nonlyg, valid rates are
auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54.
-… | column | OctetString | .1.3.6.1.4.1.3955.1000.203.6.1.1.31 |
| apRadioDtimPeriod Delivery Traffic Indication Map (DTIM) period for this Radio. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.32 |
| apRadioMaxStations The maximum number of associations supported. | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.33 |
| apRadioNumAssociatedStations Indicates total number of stations associated to this radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.34 |
| apRadioEdcaTemplate Enables the administrator to set the WMM queue parameters to
predefined values. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.35 |
| apRadioSchedulerProfile Scheduler profile name that is associated with the radio.
This is reference to the apSchedulerProfileTable. | column | OctetString | .1.3.6.1.4.1.3955.1000.203.6.1.1.36 |
| apRadioOperationalStatus Indicates operational status of Radio. The associated Scheduler profile
apRadioSchedulerProfile could affect this field. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.37 |
| apRadioOperationalChannelBandwidth The operational channel bandwidth. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.38 |
| apRadioMac MAC address for the radio. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3955.1000.203.6.1.1.4 |
| apRadioMaxBss Maximum number of BSSes or MAC addresses for this radio. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.6.1.1.5 |
| apRadioChannelPolicy Channel selection policy. Valid values are 'static', 'best'. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.6 |
| apRadioMode Wireless mode for this radio. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.6.1.1.7 |
| apRadioDot11h Indicates whether or not 802.11h is enabled on this radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.8 |
| apRadioDot11d Indicates whether or not 802.11d is enabled on the radio. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3955.1000.203.6.1.1.9 |