apQosAclRuleMatchEvery

LINKSYS-WLAN-ACCESS-POINT-MIB · .1.3.6.1.4.1.3955.1000.203.10.3.1.3
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Flag to indicate that the ACL rule is defined to match on
every IP packet, regardless of content. If set to true(1), all
other classification field objects in this row are ignored/not set.If
set to false(2),configures the other classification field objects.
Error is returned for all other values set.

Context

MIB
LINKSYS-WLAN-ACCESS-POINT-MIB
OID
.1.3.6.1.4.1.3955.1000.203.10.3.1.3
Type
column
Access
readwrite
Status
current
Parent
apQosAclRuleEntry
Table
apQosAclRuleTable
Siblings
20

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
apQosAclRuleIndex
The index of this rule instance within an IP ACL.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.1
apQosAclRuleDstIpMask
The Destination IPV4 Mask used in the ACL Classification. This mask is expressed using wild-card notation, which is the ones' complement of traditional Subnet Masks. Here, the 'D…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.10
apQosAclRuleDstL4Port
The Destination Port (Layer 4) used in ACL classification. The following are defined: ftpdata-20, ftp-21, telnet-23, smtp-25, domain-53, tftp-69, http/www-80, snmp-161.All value…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.11
apQosAclRuleIpTosBits
The Type of Service (TOS) Bits value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits represent the IP …
columnOctetString.1.3.6.1.4.1.3955.1000.203.10.3.1.12
apQosAclRuleIpTosMask
The Type of Service (TOS) Mask value. By definition, the high-order three bits represent the IP precedence value, whereas alternatively the high-order six bits represent the IP …
columnOctetString.1.3.6.1.4.1.3955.1000.203.10.3.1.13
apQosAclRuleIpDscp
IP DiffServ Code Point (DSCP) match value for the ACL rule. The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header.
columnInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.14
apQosAclRuleIpPrecedence
IP Precedence match value for the ACL rule. The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header.
columnInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.15
apQosAclRuleSrcIpv6Address
The Source IPV6 Address used in the ACL Classification.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.16
apQosAclRuleSrcIpv6Prefix
Source IPv6 Prefix Len.
columnInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.17
apQosAclRuleDstIpv6Address
The Destination IPV6 Address used in the ACL Classification.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.18
apQosAclRuleDstIpv6Prefix
Destination IPv6 Prefix Len.
columnInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.19
apQosAclRuleStatus
Status of an entry. Supported values are: - active (1) - createAndGo (4) The administrator can only use createAndGo and createAndWait. After creating an entry, its…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3955.1000.203.10.3.1.2
apQosAclRuleIpv6FlowLabel
The IPv6 Flow Label match value for the class. Hex values in the range of 00000 - FFFFF.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.10.3.1.20
apQosAclRuleCommit
Flag to indicate that to apply all the rule attributes created for this row entry. This can be set only once. Once committed, the rule properties cannot be changed.The commit val…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.21
apQosAclRuleAction
The type of action this rule should perform.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.10.3.1.4
apQosAclRuleProtocol
icmp - 1 igmp - 2 ip - 4 tcp - 6 udp - 17 All values from 1 to 255 are valid.
columnInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.5
apQosAclRuleSrcIpAddress
The Source IPV4 Address used in the ACL Classification.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.6
apQosAclRuleSrcIpMask
The Source IPV4 Mask used in the ACL Classification. This mask is expressed using wild-card notation, which is the ones' complement of traditional Subnet Masks. Here, the 'Don't c…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.7
apQosAclRuleSrcL4Port
The Source Port (Layer 4) used in ACL classification. The following are defined: ftpdata-20, ftp-21, telnet-23, smtp-25, tftp-69, http/www-80, snmp-161.All values from 0-65535 …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.10.3.1.8
apQosAclRuleDstIpAddress
The Destination IPV4 Address used in the ACL Classification.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.10.3.1.9