apTspecLegacyWmmQMapMode
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.12.1.1.10
Object
column
r/w
Enumeration
When set to on(1), the AP allows intermixing of legacy traffic
with Wi-Fi Multimedia (WMM) traffic on access category
queues that are operating according to admission control
mandatory (ACM) rules.
This mode is intended for use with non Wi-Fi Multimedia Enabled
(non-WME) clients and is off(2) by default. When this object
is set to on(1), both the voice and video access categories
are accessible by wireless clients that do not have an admitted
TSPEC, which can lead to underestimation of the available medium
time by wireless TSPEC admission control. Use caution when enabling
this mode and also consider using very small ACM limit values as well.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.12.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- apTspecAcmEntry
- Table
- apTspecAcmTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | on |
2 | off |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apTspecRadioName AP radio name. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.12.1.1.1 |
| apTspecStatus Status of the entry.
Only values active (1), createAndGo (4),
createAndWait (5) and destroy (6) are supported.
The Administrator can only use createAndGo, createAndWait and
des… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3955.1000.203.12.1.1.2 |
| apTspecMode Overall TSPEC operational mode for the designated apTspecRadioName.
This object must be set to on(1) for any of the other TSPEC ACM
configuration parameters to have an effect. T… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.12.1.1.3 |
| apTspecVoiceAcmMode Regulates mandatory admission control for the voice
access category (AC). When set to on(1), the
voice AC may only be used by WMM-compliant client
stations that have successfully… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.12.1.1.4 |
| apTspecVoiceAcmLimit Defines the maximum amount of wireless bandwidth utilization to admit
for the voice access category. TSPEC requests that would cause
this limit to be exceeded are rejected.
… | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.12.1.1.5 |
| apTspecVideoAcmMode Regulates mandatory admission control for the video
access category (AC). When set to on(1), the
voice AC may only be used by WMM-compliant client
stations that have successfully… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.12.1.1.6 |
| apTspecVideoAcmLimit Defines the maximum amount of wireless bandwidth utilization to admit
for the video access category. TSPEC requests that would cause
this limit to be exceeded are rejected.
… | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.12.1.1.7 |
| apTspecApInactivityTimeout Specifies the amount of time that an active traffic stream (TS)
in the downlink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.
… | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.12.1.1.8 |
| apTspecStaInactivityTimeout Specifies the amount of time that an active traffic stream (TS)
in the uplink direction may be idle, from the perspective of
the AP, before it is deleted by the AP.
… | column | Integer32 | .1.3.6.1.4.1.3955.1000.203.12.1.1.9 |