apIfConfigStaticMaskType

LINKSYS-WLAN-ACCESS-POINT-MIB · .1.3.6.1.4.1.3955.1000.203.5.1.1.7
MIB view Table view

Object

column INET-ADDRESS-MIBInetAddressType 
The Internet address type of apIfConfigStaticMask.

Context

MIB
LINKSYS-WLAN-ACCESS-POINT-MIB
OID
.1.3.6.1.4.1.3955.1000.203.5.1.1.7
Type
column
Access
readonly
Status
current
Parent
apIfConfigEntry
Table
apIfConfigTable
Siblings
45

Syntax

INET-ADDRESS-MIBInetAddressType
Source
INET-ADDRESS-MIBInetAddressType
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
apIfConfigIndex
Indicates index for the IfConfigTable
columnInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.1
apIfConfigPriority
Interface bridge priority. Only used when STP is enabled.
columnInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.10
apIfConfigSsid
Indicates the Service Set Id (SSID) associated with this interface. Value can be any string 1 to 32 characters.
columnApSsid.1.3.6.1.4.1.3955.1000.203.5.1.1.11
apIfConfigBss
Indicates the Basic Service Set (BSS) associated with service set interface. Also serves as an index to the corresponding apBssTable entry. Valid value is the name of an existing …
columnApBssId.1.3.6.1.4.1.3955.1000.203.5.1.1.12
apIfConfigSecurity
Indicates security to use for service-set interface. Valid values can be 'plainText', 'staticWep', 'dot1x', 'wpaPersonal', and 'wpaEnterprise'.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.5.1.1.13
apIfConfigWpaPersonalKey
Pre-shared key for Wireless Protected Access (WPA) personal. Only used when security is wpa-personal. Valid value is an ASCII string between 8 and 63 characters. Personnal Key can…
columnOctetString.1.3.6.1.4.1.3955.1000.203.5.1.1.14
apIfConfigWepKeyAscii
Indicates whether or not the Wired Equivalent Privacy (WEP) Key is in ASCII or HEX for service-set interfaces.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3955.1000.203.5.1.1.15
apIfConfigWepKeyLength
Length of the WEP key for service set interfaces. The key length values used by the SNMP do not include the initialization vector in the length. On the web UI, longer key length v…
columnEnumeration.1.3.6.1.4.1.3955.1000.203.5.1.1.16
apIfConfigWepDefaultKey
Indicates the WEP key index to use when transmitting. Only used when security is static-wep. Valid value is a number between 1 and 4. This field is valid for service-set interfac…
columnInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.17
apIfConfigWepKey1
Configure WEP key 1 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Le…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.18
apIfConfigWepKey2
Configure WEP key 2 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Le…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.19
apIfConfigName
Indicates name of interface.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.2
apIfConfigWepKey3
Configure WEP key 3 for service-set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Le…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.20
apIfConfigWepKey4
Configure WEP key 4 for service set interfaces. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Le…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.21
apIfConfigRadio
Radio associated with the WDS interface.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.5.1.1.22
apIfConfigRemoteMac
MAC Address of the remote end of the Wireless Distributed System (WDS) link.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3955.1000.203.5.1.1.23
apIfConfigWepKey
Configures WEP key for the WDS link. The number of characters required for each WEP key depends on how user sets 'Key Length' and 'Key Type': - If Key Length is 40 …
columnOctetString.1.3.6.1.4.1.3955.1000.203.5.1.1.24
apIfConfigWdsSsid
SSID for the WDS link. Also serves as an index to the apSsidTable. SSID should be in the range 1 to 32 characters.
columnApSsid.1.3.6.1.4.1.3955.1000.203.5.1.1.25
apIfConfigWdsSecPolicy
Indicates which security field to use for WDS interfaces. By default security policy is not configured on WDS interfaces.
columnEnumeration.1.3.6.1.4.1.3955.1000.203.5.1.1.26
apIfConfigWdsWpaPskKey
The WDS Wi-Fi Personnal Access(WPA) PSK key. The key is minimum 8 and upto 63 characters long.
columnOctetString.1.3.6.1.4.1.3955.1000.203.5.1.1.27
apIfConfigRxBytes
Indicates received bytes.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.28
apIfConfigRxPackets
Indicates received packets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.29
apIfConfigType
Indicates type of interface. Valid values are 'ethernet', 'loopback', 'service-set', 'bridge', 'vlan', and 'wds'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.3
apIfConfigRxErrors
Indicates received packets with errors.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.30
apIfConfigTxBytes
Indicates transmitted bytes.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.31
apIfConfigTxPackets
Indicates transmitted packets.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.32
apIfConfigTxErrors
Indicates transmitted packets with errors.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.33
apIfConfigTxDropBytes
Indicates transmitted bytes that were dropped.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.34
apIfConfigRxDropBytes
Indicates received bytes that were dropped.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.35
apIfConfigTxDropPackets
Indicates transmitted packets that were dropped.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.36
apIfConfigRxDropPackets
Indicates received packets that were dropped.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.37
apIfConfigTsVoTxBytescolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.38
apIfConfigTsViTxBytescolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.39
apIfConfigMacAddress
Indicates MAC Address of the interface.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3955.1000.203.5.1.1.4
apIfConfigTsVoRxBytescolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.40
apIfConfigTsViRxBytescolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.41
apIfConfigTsVoTxPacketscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.42
apIfConfigTsViTxPacketscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.43
apIfConfigTsVoRxPacketscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.44
apIfConfigTsViRxPacketscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.45
apIfConfigGreenEthMode
Get/Set the Green ethernet mode to (up/down).
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3955.1000.203.5.1.1.46
apIfConfigStaticIpType
The Internet address type of apIfConfigStaticIp.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3955.1000.203.5.1.1.5
apIfConfigStaticIp
IP address that will be used when DHCP server is disabled.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.5.1.1.6
apIfConfigStaticMask
Netmask that will be used when the DHCP server is disabled.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3955.1000.203.5.1.1.8
apIfConfigPathcost
Contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in i…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3955.1000.203.5.1.1.9