apDetectedRadioName
LINKSYS-WLAN-ACCESS-POINT-MIB ·
.1.3.6.1.4.1.3955.1000.203.8.1.1.2
Object
column
OctetString
Radio used to scan the detected SSID.
Context
- MIB
- LINKSYS-WLAN-ACCESS-POINT-MIB
- OID
.1.3.6.1.4.1.3955.1000.203.8.1.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- apDetectedApEntry
- Table
- apDetectedApTable
- Siblings
- 16
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| apDetectedApMac MAC address of the detected neighbor APs. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3955.1000.203.8.1.1.1 |
| apDetectedApBand The RF band the AP was detected in.
Values can be 2.4, 5, or 5 Turbo. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.10 |
| apDetectedApChannel Channel on which the AP is detected. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.8.1.1.11 |
| apDetectedApRate The basic rate at which the AP sends beacons. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.8.1.1.12 |
| apDetectedApSignal Signal Strength of the AP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.8.1.1.13 |
| apDetectedApErp The Extended PHY Rate (ERP) of the detected AP, represented
as a hexadecimal number. The bit definitions are:
0x01 - Non ERP (802.11b) STAs are present in … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.14 |
| apDetectedApBeacons Counter of Beacons received from this AP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.8.1.1.15 |
| apDetectedApLastBeacon Time of last beacon received. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.16 |
| apDetectedApSupportedRates Supported rates of the detected AP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.17 |
| apDetectedApBeaconInterval Beacon Interval for the detected AP in terms of TU.
TU is measurement of time equal to 1024 micro seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3955.1000.203.8.1.1.3 |
| apDetectedApCapability The capability of the detected AP, represented as a
hexadecimal bitflag. The bit definitions are:
0x0001 - AP
0x0002 - Ad-Hoc
0x0010 - Privacy
0x0020 - Short p… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.4 |
| apDetectedApType The type of device detected.
Values can be AP, Ad hoc, or Other. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.5 |
| apDetectedApPrivacy Indicates whether privacy (WEP or WPA) is enabled. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.8.1.1.6 |
| apDetectedApSsid SSID of the AP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3955.1000.203.8.1.1.7 |
| apDetectedApWpa Whether WPA is enabled on the scanned SSID. | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.8.1.1.8 |
| apDetectedApPhyType Mode the radio was in when the AP was detected.
Note that in B or G mode, it is possible to detect both
B and G APs, therefore the distinction between B and G
is not useful infor… | column | Enumeration | .1.3.6.1.4.1.3955.1000.203.8.1.1.9 |