CTATX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
45
Rows
45
Columns
404

hwSlotTable

table mandatory
.1.3.6.1.4.1.97.3.1.2 · 1 row entry · 25 columns
Open in standard view 
A list of the most recent occupants of the slots; one
per slot.
hwEntry entry .1.3.6.1.4.1.97.3.1.2.1
A set of objects for each slot.
Indexes
hwIndex
Column Syntax OID
hwIndex mandatory
The slot number, beginning with 1 for the top-most slot.
This number always matches the instance of the hwEntry.
For example, {hwIndex 3} contains the value '3'.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.1.2.1.1
hwType mandatory
The module type of the slot's most recent occupant
since the ES/1 was started. The values for hwType
correspond to the values for hwPortType.
Enumeration
Enumerated Values:
1vacant
2unknown
3packet-processing-engine
4turbo
5csma-iom
6hssi-iom
7tpr-iom
8fddi-iom
9ifddi-iom
10ttpr-iom
11eiom8-iom
12feiom-iom
 .1.3.6.1.4.1.97.3.1.2.1.2
hwUseMod mandatory
Whether to use this module, not applicable for the
Packet Processing Engine. The value of hwUseMod is not
saved if the ES/1 reboots. If the module fails
diagnostics, it will not be used, regardless of
hwUseMod.
Enumerationr/w
Enumerated Values:
1reset
2run-diagnostics
3run
 .1.3.6.1.4.1.97.3.1.2.1.3
hwDefType mandatory
The module type defined for the slot. Certain
pre-defined relationships exist. Slot 1 always contains
the Packet Processing Engine board. Slots 2-6 are either
unoccupied, or contain IOM boards. Slot 7 is either
unoccupi…
Enumeration
Enumerated Values:
1vacant
2unknown
3packet-processing-engine
4turbo
5csma-iom
6hssi-iom
7tpr-iom
8fddi-iom
9ifddi-iom
10ttpr-iom
11eiom8-iom
12feiom-iom
 .1.3.6.1.4.1.97.3.1.2.1.4
hwDiagStatus mandatory
Results of diagnostics, when diagnostics were last
performed on the module (whenever a module is released
from reset, which is usually at power-up).
Enumeration
Enumerated Values:
1diag-failed
2diag-not-present
3diag-passed
 .1.3.6.1.4.1.97.3.1.2.1.5
hwInuse mandatory
Whether the module is currently executing its operational
software.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.1.2.1.6
hwDiagCode mandatory
Additional diagnostics information concerning the slot's
module. The meaning of hwDiagCode depends upon the slot's
module type described by the hwType parameter. For the
Packet Processing Engine board, any error (except…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.1.2.1.7
hwManufData mandatory
This is a 24 byte array which contains the part number,
serial number and hardware revision level of this
module. The Turbo's hwManufData will be all blanks since
it is manufactured as part of the Packet Processing
Engi…
OctetString .1.3.6.1.4.1.97.3.1.2.1.8
hwPortType mandatory
This is a variable-length byte array, where each element
represents the port types belonging to this module. The
Packet Processing Engine's ports are fixed as 'uart' for
the first port, and 'none' for any other ports. T…
OctetString .1.3.6.1.4.1.97.3.1.2.1.9
hwPortStatus mandatory
This is a variable-length byte array, where each element
represents the status of the port belonging to this module.
Values of 01 (status-good) or hex ff (status-bad) are supported.
For the Packet Processing Engine, the…
OctetString .1.3.6.1.4.1.97.3.1.2.1.10
hwUsePort mandatory OctetStringr/w .1.3.6.1.4.1.97.3.1.2.1.11
hwDefPortType mandatory
This is a variable-length byte array, where each element
represents the port types defined for the module. If
hwDefPortType does not match hwPortType, then the port
will not be used. Note that hwDefPortType can only be…
OctetString .1.3.6.1.4.1.97.3.1.2.1.12
hwAddr1 mandatory
The unique hard-wired 48 bit MAC address for the module's
1st port. For the Packet Processing Engine, it's a unique
MAC address to be used as part of the ES/1's Spanning
Tree Bridge Identifier. For the Turbo, not applic…
OctetString .1.3.6.1.4.1.97.3.1.2.1.13
hwAddr2 mandatory
The unique hard-wired 48 bit MAC address for the module's
2nd port, only applicable for IOMs.
OctetString .1.3.6.1.4.1.97.3.1.2.1.14
hwAddr3 mandatory
The unique hard-wired 48 bit MAC address for the module's
3rd port, only applicable for IOMs.
OctetString .1.3.6.1.4.1.97.3.1.2.1.15
hwAddr4 mandatory
The unique hard-wired 48 bit MAC address for the module's
4th port, only applicable for IOMs.
OctetString .1.3.6.1.4.1.97.3.1.2.1.16
hwTempOK mandatory
The temperature condition of the module, where True
indicates temperature okay, and False indicates
temperature too hot.
Enumeration
Enumerated Values:
1temperature-normal
2temperature-too-hot
 .1.3.6.1.4.1.97.3.1.2.1.17
hwFirstPort mandatory
The ifIndex number of the first port which resides within
this module. [Not applicable for the Turbo.]
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.1.2.1.18
hwFatalErr mandatory
This is a 32 byte array which contains information about
the cause of the module's last unexpected self-reset,
since the ES/1 booted.For the Packet Processing
Engine and Turbo, this will always be all zeroes, since
fail…
OctetString .1.3.6.1.4.1.97.3.1.2.1.19
hwRptrPorts mandatory
This is a variable-length byte array, where each element
represents the repeater capability of the port belonging
to this module. The element value is zero if the port is
not present or does not have any repeater capabi…
OctetString .1.3.6.1.4.1.97.3.1.2.1.20
hwPortSubType mandatory
This is a variable-length byte array, where each element
represents additional port type information.
OctetString .1.3.6.1.4.1.97.3.1.2.1.21
hwAddr5 mandatory OctetString .1.3.6.1.4.1.97.3.1.2.1.22
hwAddr6 mandatory OctetString .1.3.6.1.4.1.97.3.1.2.1.23
hwAddr7 mandatory OctetString .1.3.6.1.4.1.97.3.1.2.1.24
hwAddr8 mandatory OctetString .1.3.6.1.4.1.97.3.1.2.1.25

swFilesetTable

table mandatory
.1.3.6.1.4.1.97.3.2.2 · 1 row entry · 8 columns
Open in standard view 
A list of the software file sets stored in the ES/1. The
first file set refers to the file set that was used when
the ES/1 last booted. The second file set refers to the
file set that will be used when the ES/1 reboots or
reloads any hardware module.
swFileset entry .1.3.6.1.4.1.97.3.2.2.1
A set of objects for each file set.
Indexes
swIndex
Column Syntax OID
swIndex mandatory
The file set number, beginning with 1 for the first file
set. This number always matches the instance of the swFiles.
For example, {swIndex 2} contains the value '2'.
Enumeration
Enumerated Values:
1currently-executing
2next-boot
 .1.3.6.1.4.1.97.3.2.2.1.1
swDesc mandatory
The description (0-255 bytes) of the software file set.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.2.2.1.3
swCount mandatory
The number of files in the file set. This number may range
from 1 to 255.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.2.2.1.4
swTypes mandatory
The types of the files within the file set.The size of
swFileTypes may be determined by swCount. The possible
file types are
none (0) File not present
ppe-turbo (1) Packet Processing Engine and/or Turbo Code
ppe-only(2…
OctetString .1.3.6.1.4.1.97.3.2.2.1.5
swSizes mandatory
An array (4 octets per file), containing the size of each
of the files. Each size is encoded as a series of 4 bytes,
which should be converted into a 32 bit integer.
OctetString .1.3.6.1.4.1.97.3.2.2.1.6
swStarts mandatory
An array (4 octets per file), containing the software's
execution starting address of each of the files. Each
address is encoded as a series of 4 bytes, which should
be converted into a 32 bit integer.
OctetString .1.3.6.1.4.1.97.3.2.2.1.7
swBases mandatory
An array (4 octets per file), containing the software's
base loading address of each of the files. Each address
is encoded as a series of 4 bytes, which should be
converted into a 32 bit integer.
OctetString .1.3.6.1.4.1.97.3.2.2.1.8
swFlashBank mandatory
The bank number where the software file set resides.
Enumeration
Enumerated Values:
1first-bank
2second-bank
 .1.3.6.1.4.1.97.3.2.2.1.9

fddismtTable

table mandatory
.1.3.6.1.4.1.97.3.6.5 · 1 row entry · 5 columns
Open in standard view 
A list of snmpsmt entries, one per FDDI board.
fddismtEntry entry .1.3.6.1.4.1.97.3.6.5.1
A set of objects for an interface entry.
Indexes
fddismtIndex
Column Syntax OID
fddismtIndex mandatory
A unique value for each SMT. It represents the sequence number
of the FDDI board in ES/1.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.6.5.1.1
fddismtUpstreamReq mandatory
When this variable is written, the ES/1 converts it into a
big-endian FDDI address and issues an SMT NIF request to
determine that address's upstream neighbor. When the NIF
response is received, snmpsmtUpstreamRsp will …
OctetStringr/w .1.3.6.1.4.1.97.3.6.5.1.2
fddismtUpstreamRsp mandatory
The address of the upstream neighbor of the ES/1 whose
address was written into snmpsmtUpstreamReq. If the address
has not yet been learned, then an address of all zeroes is
returned.
OctetString .1.3.6.1.4.1.97.3.6.5.1.3
fddismtUpstreamDescriptor mandatory
A four byte string containing the upstream neighbor's
Station Descriptor parameter, as defined by the SMT frame
protocols. If the upstream neighbor has not yet been
learned, then a string of all zeroes is returned.
OctetString .1.3.6.1.4.1.97.3.6.5.1.4
fddismtUpstreamState mandatory
A four byte string containing the upstream neighbor's
Station State parameter, as defined by the SMT frame
protocols. If the upstream neighbor has not yet been
learned, then a string of all zeroes is returned.
OctetString .1.3.6.1.4.1.97.3.6.5.1.5

sifTable

table mandatory
.1.3.6.1.4.1.97.3.7.2 · 1 row entry · 49 columns
Open in standard view 
A list of interface entries; one per port.
sifEntry entry .1.3.6.1.4.1.97.3.7.2.1
A set of objects for an interface entry.
Indexes
sifIndex
Column Syntax OID
sifIndex mandatory
The port number, beginning with 1 for the first port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.1
sifSmlRxCnt mandatory
The number of small data buffers for receiving packets.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.2
sifLrgRxCnt mandatory
The number of large data buffers for receiving packets; must be
zero for CSMA and UART ports.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.3
sifUxTxCnt mandatory
The maximum size of the port's transmit queue, i.e., the number
of packets that can be in the port's transmit queue, waiting to
be transmitted.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.4
sifThreshold mandatory
Maximum number of combined receive and transmit packet hardware
errors before an alarm should be generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.5
sifThresholdTime mandatory
The time period (in seconds) to which sifThreshold applies. A
value of zero will disable the sifThreshold alarm.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.6
sifRxQueueThresh mandatory
Maximum number of receive packet queue overflow errors before
an alarm should be generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.7
sifRxQueueThreshTime mandatory
The time period (in seconds) to which sifRxQueueThresh applies.
A value of zero will disable the sifRxQueueThresh alarm.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.8
sifTxStormCnt mandatory
The maximum number of multicasts to transmit with a certain
period of time (not applicable for UART ports).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.9
sifTxStormTime mandatory
The period of time, in centiseconds, which qualifies
sifTxStormCnt (not applicable for UART ports).
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.10
sifFilterFlags mandatory
Special filter flags; any combination of the following bits:
0x0001 NO_SOURCE_SAME, 0x0002 NO_SOURCE_LEARNT, 0x0004
NO_LEARNING, 0x0008 NO_DEST_LEARNT
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.11
sifCongestTime mandatory
When a port becomes congested, the PPE will discard any packets
destined to the port for this many centiseconds following the
congestion alarm. Possible values 0 through 5 minutes, except
for port 1 (the out-of-band man…
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.12
sifQueueTime mandatory
The time, in centiseconds, after which an element in a transmit
queue will be flushed.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.13
sifPortCost mandatory Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.14
sifStPriority mandatory Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.15
sifFunctions mandatory
The current functional state (protocols which have been
activated and are operational) of the port. The following
values or combinations are supported:
0x0001 NMS, 0x0002 TBRIDGE, 0x0004 SBRIDGE,
0x0006 SR…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.16
sifCongested mandatory
Whether the port is out-bound congested.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.7.2.1.17
sifState mandatory Enumeration
Enumerated Values:
1spanning-tree-disabled
2spanning-tree-listening
3spanning-tree-learning
4spanning-tree-forwarding
5spanning-tree-blocking
 .1.3.6.1.4.1.97.3.7.2.1.18
sifDesigCost mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.19
sifDesigRoot mandatory OctetString .1.3.6.1.4.1.97.3.7.2.1.20
sifDesigBridge mandatory OctetString .1.3.6.1.4.1.97.3.7.2.1.21
sifDesigPort mandatory OctetString .1.3.6.1.4.1.97.3.7.2.1.22
sifRxPackets mandatory
A 100 byte array, containing the number of received packets
broken down into 25 categories. The number of packets in each
category is encoded as a series of 4 bytes, which should be
converted into a 32 bit counter. The …
OctetString .1.3.6.1.4.1.97.3.7.2.1.23
sifRxChar0s mandatory
Number of characters in the forwarded received packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.24
sifRxChar1s mandatory
Number of characters in the filtered received packets.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.25
sifRxSizeErrors mandatory
Number of received packets discarded due to size errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.26
sifRxHwFCSs mandatory
Number of received packets discarded due to FCS errors.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.27
sifRxQueues mandatory
Number of received packets lost because of insufficient receive
buffers.(For certain interfaces with multi-packet FIFO hardware,
this count might be approximate.)
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.28
sifTxPackets mandatory
A 20 byte array, containing the number of transmitted packets
broken down into 5 categories. The number of packets in each
category is encoded as a series of 4 bytes, which should be
converted into a 32 bit counter.
OctetString .1.3.6.1.4.1.97.3.7.2.1.30
sifTxCongests obsolete RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.31
sifTxStorms mandatory
Number of packets not sent due to protection against a
multicast storm.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.32
sifTxDests mandatory
Number of packets not sent due to a destination port filtering
restriction.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.33
sifErrorsFlag mandatory
Whether the port has exceeded the limits specified by
sifThreshold and sifThresholdTime.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.7.2.1.34
sifTxStormFlag mandatory
Whether PPE has invoked multicast storm protection.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.7.2.1.35
sifTxSizes mandatory
Number of packets not sent due to size limitations.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.36
sifTxAddr mandatory
A series of 16 MAC addresses (96 octets in total), of the
source addresses of the last 16 packets that were not sent due
to packet size limitations. If fewer than 16 packets were not
sent, then the unspecified MAC addre…
OctetString .1.3.6.1.4.1.97.3.7.2.1.37
sifLan mandatory
Up to four group identifiers assigned to the port. The sifLan
identifier is only used by combination filter testing, i.e.,
for comparisons against filterSrcLan. Possible values are 0
through 255, for each of the paramet…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.38
sifStatisticsTime mandatory
Length of time during which statistics were collected. In
particular, the following statistics may be examined to
determine the exact utilization rate of a port:
ifInOctets, ifInUcastPkts, ifInNUcastPkts
ifOutOctets, …
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.39
sifIpAddress mandatory
The IP address assigned to the port. If this is zero, then the
port must learn its IP address via Reverse ARP or PPP's IPCP.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.7.2.1.40
sifIpGroupAddress mandatory
Zero, or an IP Group address assigned to the port.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.7.2.1.41
sifMaxPacketSize mandatory
The maximum packet size, in bytes (octets), which may be
transmitted through this port. This parameter may not be
changed, except for PPP ports, in which case, changing
sifMaxPacketSize automatically causes ifMtu and pp…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.42
sifExpectSqe mandatory
Whether the port should expect SQE, also known as heartbeat
(not applicable for ports other than CSMA/CD ports).
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.7.2.1.43
sifFilterLocal mandatory
Whether the port should attempt to filter local traffic,
bypassing all statistics accumulation, rather than passing the
local traffic to the Packet Processing Engine. Filtering local
traffic is not available for UART an…
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.7.2.1.44
sifInQLen mandatory
The maximum length ever obtained by the port's inbound packet
queue (in packets). The size of a port's inbound packet queue
is periodically polled (rather than recalculated whenever a
packet is added), so sifInQLen is a…
RFC1155-SMIGauger/w
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.45
sifFrameSwitching mandatory
Valid only for Token Ring ports. Options include:
enabled (1), disabled (2).Defaults to disabled(2). If
enabled, frames may be bridged between token ring ports on
the same board at higher throughput and lower latency th…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.7.2.1.46
sifRingDrops mandatory
Only valid for 802.5 token ring. Number of times
the ring left the open state.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.47
sifAdapterChecks mandatory
Only valid for 802.5 token ring. Number of times
the MAC chip experienced an internal hardware failure
and had to be reset.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.2.1.48
sifIpRipPortMetric mandatory
Port metric for backup RIP interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.2.1.49
sifDescr mandatory
A textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetStringr/w .1.3.6.1.4.1.97.3.7.2.1.50

sifUtilPortPeakTable

table mandatory
.1.3.6.1.4.1.97.3.7.6 · 1 row entry · 5 columns
Open in standard view 
A list of interface utilization entries; one per sifUtilCount per
physical port, plus one per physical port for the most recently
completed samples.
sifUtilPortPeakEntry entry .1.3.6.1.4.1.97.3.7.6.1
A set of utilization statistics recorded for an interface entry at
per-port throughput peaks.
Indexes
sifUtilPortPeakIndex sifUtilPortPeakOrdinal
Column Syntax OID
sifUtilPortPeakIndex mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.6.1.1
sifUtilPortPeakOrdinal mandatory
The ordinal of the entry, with 1 representing 'Now' (i.e. the sample
most recently accumulated), with 2 representing the sample taken at the
highest per-port throughput peak, 3 at the next highest, and so on.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.6.1.2
sifUtilPortPeakBRTimestamp mandatory
The value of sysUpTime associated with the end of the sample period for
the associated sifUtilPortPeakTBitRate/sifUtilPortPeakRBitRate sample,
or the most recent timestamp for the sample currently being accumulated.
Thi…
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.6.1.3
sifUtilPortPeakTBitRate mandatory
The ratio of the number of bits transmitted per second during the
per-physical-port sample interval to the linespeed in bits per second,
expressed in integer units of 1/100, maximum 99. This will be 0 for any
ports for…
Integer32
Constraints:
range: 0-99
 .1.3.6.1.4.1.97.3.7.6.1.4
sifUtilPortPeakRBitRate mandatory
The ratio of the number of bits received per second during the
per-physical-port sample interval to the linespeed in bits per second,
expressed in integer units of 1/100, maximum 99, and excluding some or
all locally-fi…
Integer32
Constraints:
range: 0-99
 .1.3.6.1.4.1.97.3.7.6.1.5

sifUtilSysPeakTable

table mandatory
.1.3.6.1.4.1.97.3.7.8 · 1 row entry · 5 columns
Open in standard view 
A list of interface utilization entries; one per sifUtilCount per
physical port, plus one per physical port for the most recently
completed samples.
sifUtilSysPeakEntry entry .1.3.6.1.4.1.97.3.7.8.1
A set of utilization statistics recorded for an interface entry at
overall system throughput peaks.
Indexes
sifUtilSysPeakIndex sifUtilSysPeakOrdinal
Column Syntax OID
sifUtilSysPeakIndex mandatory
The port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.8.1.1
sifUtilSysPeakOrdinal mandatory
The ordinal of the entry, with 1 representing 'Now' (i.e. the sample
most recently accumulated), with 2 representing the sample taken at the
highest peak system throughput, 3 at the next highest, and so on.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.7.8.1.2
sifUtilSysPeakTimestamp mandatory
The value of sysUpTime associated with the end of the sample period for
the associated sifUtilSysPeakTBitRate/sifUtilSysPeakRBitRate sample, or
the most recent timestamp for the sample currently being accumulated.
This …
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.7.8.1.3
sifUtilSysPeakTBitRate mandatory
The ratio of the number of bits transmitted per second during the
per-system-peak sample interval to the linespeed in bits per second,
expressed in integer units of 1/100, maximum 99. This will be 0 for any
ports for w…
Integer32
Constraints:
range: 0-99
 .1.3.6.1.4.1.97.3.7.8.1.4
sifUtilSysPeakRBitRate mandatory
The ratio of the number of bits received per second during the
per-system-peak sample interval to the linespeed in bits per second,
expressed in integer units of 1/100, maximum 99, and excluding some or
all locally-filt…
Integer32
Constraints:
range: 0-99
 .1.3.6.1.4.1.97.3.7.8.1.5

sfddiTable

table mandatory
.1.3.6.1.4.1.97.3.8.1 · 1 row entry · 25 columns
Open in standard view 
A list of interface entries; one per FDDI port.
sfddiEntry entry .1.3.6.1.4.1.97.3.8.1.1
A set of objects for an interface entry.
Indexes
sfddiIndex
Column Syntax OID
sfddiIndex mandatory
The ES/1's port number of the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.1
sfddiRxHwAborts mandatory
The number of packets that were discarded due to receive
abort errors.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.2
sfddiRxParitys mandatory
The number of packets that were discarded due to parity
errors.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.3
sfddiRxShorts mandatory
The number of packets that were discarded because they were
too short.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.4
sfddiDpcErrCnts mandatory
The number of DPC errors.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.5
sfddiDpcErrValue mandatory
Detailed status of the last DPC error.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.6
sfddiRbcErrCnts mandatory
The number of RBC errors.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.7
sfddiRbcErrValue mandatory
Detailed status of the last RBC error. (FIOM MIB only)
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.8
sfddiTxAsync mandatory
Number of bytes to reserve in the DPC Buffer Memory for
transmitting asynchronous packets.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.9
sfddiShortAddressing mandatory
Whether any packets were received with 16 bit MAC
addresses.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.8.1.1.10
sfddiSmtConditions mandatory
SMT conditions which should be reported to the NMS via SNMP
Traps. Possible values are any combination of the following
bits:
ring = 0x00000001, claim = 0x00000002, beacon = 0x00000004,
tvx = 0x00000008, trt = 0x0000001…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.11
sfddiSrfConditions mandatory
SRF conditions which should be reported to the NMS via SNMP
Traps. Possible values are any combination of the following
bits:
srf-frame-error = 0x00000001, srf-port-ler = 0x00000002,
srf-not-copied = 0x00000004,srf-dup…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.12
sfddiSmtConditionsStatus mandatory
Requested SMT conditions which are currently present.
Writing to sfddiSmtConditionsStatus is used to acknowledge
the SNMP traps.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.13
sfddiSrfConditionsStatus mandatory
Requested SRF conditions which are currently present.
Writing to sfddiSrfConditionsStatus is used to acknowledge
the SNMP traps.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.14
sfddiSrfReportLimit mandatory Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.15
sfddiFrameErrorThreshold mandatory Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.16
sfddiNotCopiedThreshold mandatory
Value for the fddiMACNotCopiedThreshold variable.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.17
sfddiSBFlag mandatory
Whether the ECM's optical bypass is stuck, i.e., the current
value of the SMT SB_Flag variable.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.8.1.1.18
sfddiRxEbits mandatory
The number of packets that were discarded because another
station had already set the E bit.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.8.1.1.19
sfddiOBSFuseBad mandatory
Whether the fuse to the FDDI port's optical bypass is bad.
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.8.1.1.20
sfddiThruB mandatory
Whether to connect to the FDDI port B (not applicable for
SAS).
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.8.1.1.21
sfddiStationDescriptor mandatory
A four byte string containing the FDDI port's Station
Descriptor parameter, as defined by the SMT frame protocols.
OctetString .1.3.6.1.4.1.97.3.8.1.1.22
sfddiStationState mandatory
A four byte string containing the FDDI port's Station State
parameter, as defined by the SMT frame protocols.
OctetString .1.3.6.1.4.1.97.3.8.1.1.23
sfddiDownstreamNbr mandatory
The MAC address of the FDDI port's downstream neighbor.
OctetString .1.3.6.1.4.1.97.3.8.1.1.24
sfddiSMTBufferSize mandatory
The amount of packet buffer space to reserve for processing
SMT frames. Possible values 9000 - 18000. (FIOM MIB only)
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.8.1.1.25

suartTable

table mandatory
.1.3.6.1.4.1.97.3.9.1 · 1 row entry · 7 columns
Open in standard view 
A list of interface entries; one per UART port.
suartEntry entry .1.3.6.1.4.1.97.3.9.1.1
A set of objects for an interface entry.
Indexes
suartIndex
Column Syntax OID
suartIndex mandatory
The ES/1's port number of the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.9.1.1.1
suartBaud mandatory
This is the desired baud rate. Only 1200 baud through 19,200
baud are supported by the ES/1.
Enumerationr/w
Enumerated Values:
1external-clock
2b1200-baud
3b2400-baud
4b4800-baud
5b9600-baud
6b19200-baud
7b38400-baud
8b56-kilobits
9b1544-kilobits
10b2048-kilobits
11b45-megabits
 .1.3.6.1.4.1.97.3.9.1.1.2
suartModem mandatory
The expected modem signals; definitions of the different
values are TBD.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.9.1.1.3
suartIpNeighborAddress mandatory RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.9.1.1.4
suartPPPActive mandatory Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.9.1.1.5
suartAlignmentErrors mandatory
Number of received packets with frame alignment errors,
since the port was last enabled.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.9.1.1.6
suartOverrunErrors mandatory
Number of received packets with data overrun errors, since
the port was last enabled.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.9.1.1.7

filterTable

table mandatory
.1.3.6.1.4.1.97.3.10.7 · 1 row entry · 21 columns
Open in standard view 
A list of combination filters; one per defined filter. If
fewer than filterMaxCount filters have been defined, then an
additional filterEntry exists, which is used as part of the
sequence for defining a new filter.
filterEntry entry .1.3.6.1.4.1.97.3.10.7.1
A set of objects for a combination filter.
Indexes
filterIndex
Column Syntax OID
filterIndex mandatory
This number always matches the instance of the filterEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.1
filterID mandatory
Identifier assigned to the filter, used for obtaining the
value for filterDeleteID so that the filter can be deleted.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.2
filterPortNo mandatory
The port number related to this filter.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.3
filterComboType mandatory
Whether this is an entry filter (0), an exit filter(1),
a port mirror entry filter (3), or a port mirror exit
filter (4).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.4
filterFlags mandatory
A set of flag bits which control the operation of the filter.
Filters will not prevent packets from being accepted by the
ES/1 as a final destination. The following bits are used:
bit 13, bit 12, bit 11, bit 10. bits…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.5
filterFrame mandatory
Ethernet protocol type (1501-65535), or one (1) to indicate
any 802 frame, or two (2) to indicate any Ethernet frame,
Note that a specific Ethernet protocol type may appear in
either Ethernet format frames, or encapsula…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.6
filterSource mandatory
Beginning source address.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.7
filterSourceEnd mandatory
Ending source address.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.8
filterDest mandatory
Beginning destination address.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.9
filterDestEnd mandatory
Ending destination address.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.10
filterSourceMask mandatory
A bitmask to be applied to the packet's source address
before checking it against filterSource and filterSourceEnd.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.11
filterDestMask mandatory
A bitmask to be applied to the packet's destination address
before checking it against filterDest and filterDestEnd.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.12
filterSrcLan mandatory
Either the port number from which the packet is received, or
the value of any one of the group identifiers defined by
sifLan for that port.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.13
filterOffset mandatory
Zero-based offset of an arbitrary field within the packet.
Depending upon the value of filterFlags, the offset is
relative to the start of the translated packet, beginning
with the big endian MAC addresses; or, the offs…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.14
filterField mandatory
An 8 octet value to be compared to the contents of the
arbitrary field within the packet.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.15
filterMask mandatory
An 8 octet mask to be applied to the arbitrary field within
the packet, before comparing it to filterField.
OctetStringr/w .1.3.6.1.4.1.97.3.10.7.1.16
filterThreshold mandatory
The number of filter invocations at which an alarm to the
NMS should be generated.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.17
filterThreshTime mandatory
The length of time, in seconds, to which filterThreshold
applies. A value of zero indicates that no alarms should be
sent to the NMS. Values greater than 3600 (i.e., one hour)
are not allowed.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.10.7.1.18
filterThreshFlag mandatory
Whether usage of this filter has exceeded the limits
specified by filterThreshold and filterThreshTime, and the
NMS has not yet acknowledged the alarm. Therefore, whenever
the NMS reads this value, it will always be Fal…
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.10.7.1.19
filterPktCnts mandatory
The total number of packets which were discarded due to this
filter.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.10.7.1.20
filterLastSrc mandatory
The source MAC address of the last packet which was
discarded due to this filter
OctetString .1.3.6.1.4.1.97.3.10.7.1.21

rebootSlotTable

table mandatory
.1.3.6.1.4.1.97.3.11.2 · 1 row entry · 4 columns
Open in standard view 
A list of the desired occupants of the slots; one per slot.
rebootEntry entry .1.3.6.1.4.1.97.3.11.2.1
A set of objects for each slot.
Indexes
rebootIndex
Column Syntax OID
rebootIndex mandatory
The slot number, beginning with 1 for the first slot. This
number always matches the instance of the rebootEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.11.2.1.1
rebootType mandatory
The desired module type of the slot.
Enumerationr/w
Enumerated Values:
1vacant
2unknown
3packet-processing-engine
4turbo
5csma-iom
6hssi-iom
7tpr-iom
8fddi-iom
9ifddi-iom
10ttpr-iom
11eiom8-iom
12feiom-iom
 .1.3.6.1.4.1.97.3.11.2.1.2
rebootUseMod mandatory
Whether to use this module, not applicable for the Packet
Processing Engine.
Enumerationr/w
Enumerated Values:
1reset
3run
 .1.3.6.1.4.1.97.3.11.2.1.3
rebootPortType mandatory
This is a variable-length byte array where each element
represents the types of the ports belonging to this module.
OctetStringr/w .1.3.6.1.4.1.97.3.11.2.1.4

debugTable

table mandatory
.1.3.6.1.4.1.97.3.12.3 · 1 row entry · 5 columns
Open in standard view 
A list of the modules which may be debugged, with one module
per slot defined by hwSlotTable.
debugEntry entry .1.3.6.1.4.1.97.3.12.3.1
A set of objects for each module.
Indexes
debugIndex
Column Syntax OID
debugIndex mandatory
The module number, beginning with 1 for the module in the
first slot. This number always matches the instance of the
debugEntry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.12.3.1.1
debugOperation mandatory
Type of debug operation requested.
Enumerationr/w
Enumerated Values:
1examine
2modify
 .1.3.6.1.4.1.97.3.12.3.1.2
debugBase mandatory
The base address of the memory region to be examined or
modified.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.12.3.1.3
debugLength mandatory
The desired length, in words, of the memory region to be
examined or modified. After the ES/1 performs the operation,
debugLength is updated to indicate the length of memory that
was actually examined or modified. If de…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.12.3.1.4
debugData mandatory
A series of 0-64 octets, which represents 0-16 words (this may
change in the future, if the ES/1 has processors with word
sizes of other than 4 bytes per word). When this variable is
read, the LMA will use the values in…
OctetStringr/w .1.3.6.1.4.1.97.3.12.3.1.5

lpbkTable

table mandatory
.1.3.6.1.4.1.97.3.13.1 · 1 row entry · 14 columns
Open in standard view 
A list of interface entries; one per port.
lpbkEntry entry .1.3.6.1.4.1.97.3.13.1.1
A set of objects for an interface entry.
Indexes
lpbkIndex
Column Syntax OID
lpbkIndex mandatory
The port number, beginning with 1 for the first port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.1
lpbkOperation mandatory
The type of loopback being performed. Setting lpbkOperation to
loopback-off causes loop back operation to terminate. Setting
lpbkOperation to loopback-local or loopback-remote causes
loopback operation to commence, and …
Enumerationr/w
Enumerated Values:
1loopback-off
2loopback-local
3loopback-remote
 .1.3.6.1.4.1.97.3.13.1.1.2
lpbkDestAddr mandatory
The MAC address of the target device, only needed for remote
loopback.
OctetStringr/w .1.3.6.1.4.1.97.3.13.1.1.3
lpbkPktNum mandatory
The number of loopback packets to be transmitted.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.4
lpbkInterval mandatory
The desired time delay between the reception of a looped back
packet, and the transmission of the next packet to be looped
back.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.13.1.1.5
lpbkPktLength mandatory
The length (in octets) of the loopback packet. The values of
the data itself are automatically selected by the ES/1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.6
lpbkIncrements mandatory
The number of bytes of data to be added to the loopback packet
after each successful loopback packet transmission and
reception. When the port's maximum packet size has been reached,
the ES/1 automatically begins again,…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.7
lpbkGoods mandatory
The number of packets successfully looped back. This number is
automatically reset to zero, whenever loopback operation is
initiated.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.13.1.1.8
lpbkErrorNoReceives mandatory
The number of packets which were transmitted, but not received.
This number is automatically reset to zero, whenever loopback
operation is initiated.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.13.1.1.9
lpbkErrorBadReceives mandatory
The number of transmitted packets which were received with
different data patterns. This number is automatically reset to
zero, whenever loopback operation is initiated.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.13.1.1.10
lpbkErrorSize mandatory
The length of the last loopback packet which caused either
lpbkErrorNoReceives or lpbkErrorBadReceives to be incremented.
This number is automatically reset to zero, whenever loopback
operation is initiated.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.11
lpbkErrorSent mandatory
The transmitted bytes (0-4) of data within the last loopback
packet which caused lpbkErrorBadReceives to be incremented.
This parameter is automatically reset to the null string,
whenever loopback operation is initiated.
OctetString .1.3.6.1.4.1.97.3.13.1.1.12
lpbkErrorReceived mandatory
The received bytes (0-4) of data within the last loopback
packet which caused lpbkErrorBadReceives to be incremented.
This parameter is automatically reset to the null string,
whenever loopback operation is initiated.
OctetString .1.3.6.1.4.1.97.3.13.1.1.13
lpbkErrorOffset mandatory
The byte offset (one being the first byte) within the loopback
packet where lpbkErrorSent begins. This number is automatically
reset to zero, whenever loopback operation is initiated.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.13.1.1.14

swanTable

table mandatory
.1.3.6.1.4.1.97.3.14.1 · 1 row entry · 23 columns
Open in standard view 
A list of interface entries; one per WAN port.
swanEntry entry .1.3.6.1.4.1.97.3.14.1.1
A set of objects for an interface entry.
Indexes
swanIndex
Column Syntax OID
swanIndex mandatory
The ES/1's port number of the port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.14.1.1.1
swanDesiredSpeed mandatory Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.14.1.1.2
swanActualSpeed mandatory
This is the actual line speed. The possible values are defined
by suartSpeed. For HSSI, the speed is 45-megabits(11). If the
RS-449 interface is being used on the HSSI IOM, the speed is
always reported as 1.544-megabits…
Enumeration
Enumerated Values:
2b1200-baud
3b2400-baud
4b4800-baud
5b9600-baud
6b19200-baud
7b38400-baud
8b56-kilobits
9b1544-kilobits
10b2048-kilobits
11b45-megabits
 .1.3.6.1.4.1.97.3.14.1.1.3
swanIpNeighborAddress mandatory
Zero, or an IP address to assign to the port's neighbor.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.14.1.1.4
swanPPPActive mandatory Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.14.1.1.5
swanAlignmentErrors mandatory RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.14.1.1.6
swanOverrunErrors mandatory
Number of received packets with data overrun errors, since the
port was last enabled.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.14.1.1.7
swanPortType mandatory Enumeration
Enumerated Values:
1wan-unknown
2wan-v11
3wan-v24
4wan-v35
5wan-e1
6wan-t1
7wan-rs530
8wan-t3
 .1.3.6.1.4.1.97.3.14.1.1.8
swanLinkCost mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.14.1.1.9
swanMeshState mandatory Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.14.1.1.10
swanLinkSubnet mandatory OctetString .1.3.6.1.4.1.97.3.14.1.1.11
swanLinkBridge mandatory OctetString .1.3.6.1.4.1.97.3.14.1.1.12
swanLinkPort mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.14.1.1.13
swanNegotiate mandatory Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.14.1.1.14
swanSwitches mandatory
Current port selected.
Enumerationr/w
Enumerated Values:
1wan-hssi
2wan-t1
3wan-hssi-switching-disabled
4wan-t1-switching-disabled
 .1.3.6.1.4.1.97.3.14.1.1.15
swanDCEDrops mandatory
Number of instances when loss of DCE has been detected.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.14.1.1.16
swanOutPacketType mandatory
The type of out going packet to generate on the HSSI link.
Enumerationr/w
Enumerated Values:
1token-ring-without-FCS
2token-ring-with-FCS
3ethernet-without-FCS
4ethernet-with-FCS
 .1.3.6.1.4.1.97.3.14.1.1.17
swanLinkErrorPercentage mandatory
The percentage of acceptible errors in hundreths of percent.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.97.3.14.1.1.18
swanLinkErrorDuration mandatory
The time period in hundredths of a second over which the error
percentage should be applied.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.97.3.14.1.1.19
swanLinkErrorFailPeriods mandatory
The maximum number of periods allowed to contain the error
percentage before the link quality is determined to have failed.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.97.3.14.1.1.20
swanLinkErrorMaxPeriods mandatory
The maximum number of periods to be used for calculation of link
quality. Default is 10.
Integer32r/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.97.3.14.1.1.21
swanLinkRestartTime mandatory
The time period in centiseconds which must contain error free
LQR operation before restarting link.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.97.3.14.1.1.22
swanPreserveFCS mandatory
Preserve received FCS if true, else regenerate FCS on packet
transmission.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.14.1.1.23

srepeaterTable

table mandatory
.1.3.6.1.4.1.97.3.16.1 · 1 row entry · 3 columns
Open in standard view 
SMC-specific status information and control variables for a
collection of repeater groups in a particular system.
srepeaterEntry entry .1.3.6.1.4.1.97.3.16.1.1
SMC-specific status information and control variables for a
particular repeater domain (group) in the system.
Indexes
srepeaterGroupID
Column Syntax OID
srepeaterGroupID mandatory
The value of srepeaterGroupID is assigned so as to uniquely
identify a repeater domain (group) in a system where a single
agent manages multiple repeater domains.
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.97.3.16.1.1.1
srepeaterLinkStatusMask mandatory
This mask provides quick access to the general
connectivity of the repeater. Each bit
corresponds to the link status of a repeater
port. If the bit is set to 1 then link pulses are
being received, as per the IEEE specif…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.16.1.1.2
srepeaterExtendedStats mandatory
When enabled(1), the rptrMonitorGroup, rptrMonitorPort,
and rptrAddrTrack tables are available, and the CEIOM
maintains frame-by-frame tallies for the repeater in
order to support these tables. Bridging performance may
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.16.1.1.3

srepeaterPortTable

table mandatory
.1.3.6.1.4.1.97.3.16.2 · 1 row entry · 3 columns
Open in standard view 
SMC-specific status information and control variables for a
collection of repeater ports in a particular system.
srepeaterPortEntry entry .1.3.6.1.4.1.97.3.16.2.1
SMC-specific status information and control variables for a
particular repeater port in the system.
Indexes
srepeaterPortGroupID srepeaterPortPortID
Column Syntax OID
srepeaterPortGroupID mandatory
The value of srepeaterPortGroupID is assigned so as to uniquely
identify a group (repeater ID) in a system where a single
agent manages multiple repeater groups. This corresponds to
ifIndex, as well as rptr...GroupIndex…
Integer32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.97.3.16.2.1.1
srepeaterPortPortID mandatory
Identifies a repeater port within a repeater group/domain.
Values correspond to physical connector position on the CEIOM.
For the CEIOM-24, the leftmost position is port 1, the
rightmost port 24.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.16.2.1.2
srepeaterPortLinkPulse mandatory
When enabled (the default), the repeater port generates and
expects to receive a link pulse, as per 10BaseT specification.
When disabled, the port does not generate or expect link
pulse, in order to accommodate pre-10Ba…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.16.2.1.3

sprotoTable

table mandatory
.1.3.6.1.4.1.97.3.17.1 · 1 row entry · 23 columns
Open in standard view 
This table contains configuration information specifying
the types of protocols used to bridge, route, translate,
and filter frames for each port.
sprotoEntry entry .1.3.6.1.4.1.97.3.17.1.1
Each entry in this table specifies which protocols are
used by a particular port in the ES/1.
Indexes
sprotoIfIndex
Column Syntax OID
sprotoIfIndex mandatory
Identifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.17.1.1.1
sprotoBridge mandatory
Defines the bridging method to be applied to frames
received at, or destined for, this port. Ethernet and
FDDI ports may be configured for transparent, srt, or
none. Token Ring ports may be configured for any of
the fo…
Enumerationr/w
Enumerated Values:
1transparent
2sr
3srt
4none
 .1.3.6.1.4.1.97.3.17.1.1.2
sprotoSuppressBpdus mandatory
Allows transmission of spanning tree protocol packets
to be suppressed. If normal(1), 802.1d spanning tree
packets and source-routing spanning tree packets are
transmitted as usual. If suppressed(2), these packets
are …
Enumerationr/w
Enumerated Values:
1normal
2suppressed
 .1.3.6.1.4.1.97.3.17.1.1.3
sprotoIpRoute mandatory
Specifies whether or not this port is to be used for
IP routing.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.4
sprotoIpxRoute mandatory
Specifies whether or not this port is to be used for
Novell NetWare IPX routing.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3ipxsr
 .1.3.6.1.4.1.97.3.17.1.1.5
sprotoAppleRoute mandatory
Specifies whether or not this port is to be used for
AppleTalk (tm) routing.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.6
sprotoArpTranslate mandatory
These options are intended to compensate for any like-
ly implementation of internet ARP on 802.5 token ring.
If set to bitswap1(2), then embedded MAC addresses for
ARP packets with hardwareType 1 (Ethernet) will be
bit…
Enumerationr/w
Enumerated Values:
1none
2bitswap1
3bitswap6
4bitswap61
5oneto6
6oneto6swap
 .1.3.6.1.4.1.97.3.17.1.1.7
sprotoArpSourceRoute mandatory
Specifies whether, when bridging TCP/IP ARP packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery p…
Enumerationr/w
Enumerated Values:
1passRif
2stripRif
3passBoth
4none
 .1.3.6.1.4.1.97.3.17.1.1.8
sprotoIpxTranslate mandatory
Specifies whether, when bridging Novell IPX frames,
they are to be translated to Ethernet-like frame for-
mat.

This option applies only to token ring ports.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.9
sprotoAppleTranslate mandatory
Specifies whether, when bridging AppleTalk ELAP, TLAP,
and AARP frames, those frames are to be translated
between token ring and Ethernet format before being
forwarded.

This option applies only to token r…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.10
sprotoIbmLlcTranslate mandatory
Specifies whether, when bridging IBM LLC frames, an
8209-style translation between token ring and Ethernet
format is to be performed before being forwarded.

This option applies only to token ring ports.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.11
sprotoRip mandatory
Specifies whether the internet Routing Information
Protocol (RFC-1058) is to be used over this port. Only
valid if sprotoIpRoute is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.12
sprotoEgp mandatory
Specifies whether the internet External Gateway Proto-
col (RFC-904) is to be used over this port. Only valid
if sprotoIpRoute is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.13
sprotoOspf mandatory
Specifies whether the internet Open Shortest Path
First protocol (RFC-1247) is to be used over this port.
Only valid if sprotoIpRoute is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.14
sprotoArpProxy mandatory
Specifies whether the port is to respond to internet
ARP requests for which the unit is the next hop in a
routed path. Only valid if sprotoIpRoute is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.15
sprotoIbm8209Lsaps mandatory
Specifies up to eight LSAPs for which IBM 8209-style
token-ring-to-Ethernet encapsulation is to be performed.
Only valid if sprotoIbmLLcTranslate is enabled.

This option applies only to token ring ports.
OctetStringr/w .1.3.6.1.4.1.97.3.17.1.1.16
sprotoBootpRelay mandatory
Specifies whether or not this port is to
relay BOOTP packets, as described in RFC-951
and subsequent internet-drafts. Only valid if
IP routing is also enabled for this interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.17
sprotoNetbiosTranslate mandatory
Specifies whether, when bridging Netbios packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery proc…
Enumerationr/w
Enumerated Values:
1passRif
2stripRif
3passBoth
4none
 .1.3.6.1.4.1.97.3.17.1.1.18
sprotoIpMulticast mandatory
Specifies whether the internet Multicast Routing
Protocol (RFC-1075) is to be used over this port. Only
valid if sprotoIpRoute is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.19
sprotoTrunking mandatory
Specifies whether SMC's trunking protocol (an extension
to the standard Spanning Tree) is to be used over this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.17.1.1.20
sprotoIpxSrTranslate mandatory
Specifies whether, when bridging IPX packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery proceedi…
Enumerationr/w
Enumerated Values:
1passRif
2stripRif
3passBoth
4none
 .1.3.6.1.4.1.97.3.17.1.1.22
sprotoAllTranslate mandatory
Specifies whether, when bridging any source-routed
explorer frames, the routing information is to be
stripped or propagated. If passRif(1), the frame is bridged
as is, with route-discovery proceeding as expected.
…
Enumerationr/w
Enumerated Values:
1passRif
2stripRif
3passBoth
4none
 .1.3.6.1.4.1.97.3.17.1.1.23
sprotoSteHopCountAppliedRule mandatory
hopcountnotapplied(1), STE hop count rules are not
applied to STE frames. Default for SR ports.
Follows IBM's specifications. hopcountapplied(2),
STE hop count rules are applied to STE frames.
Default SRT po…
Enumerationr/w
Enumerated Values:
1hopcountnotapplied
2hopcountapplied
 .1.3.6.1.4.1.97.3.17.1.1.24

sipxIfTable

table mandatory
.1.3.6.1.4.1.97.3.18.1 · 1 row entry · 7 columns
Open in standard view 
Describes per-interface attributes of IPX routing.
sipxIfEntry entry .1.3.6.1.4.1.97.3.18.1.1
For a particular interface, defines the IPX routing
information.
Indexes
sipxIfIndex
Column Syntax OID
sipxIfIndex mandatory
Used to index through the interfaces (ports) on the ES/1,
when used as an IPX router. Identical to ifIndex. Entries
exist for all external interfaces, whether or not they
are actually populated or configured for IPX rou…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.1.1.1
sipxIfNetwork mandatory
The IPX network number associated with this interface.
OctetStringr/w .1.3.6.1.4.1.97.3.18.1.1.2
sipxIfFraming mandatory
Defines the link-level framing to be used for this interface.
Options 1-4 are available for Ethernet; options 3 and 4 are
valid for token ring; options 3-5 are valid for FDDI links.
Enumerationr/w
Enumerated Values:
1ethernet8023
2ethernet2
3ieee8022
4snap
5rawfddi
6ppp
 .1.3.6.1.4.1.97.3.18.1.1.3
sipxIfInRipPkts mandatory
Number of IPX Routing Information Protocol packets
received on this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.18.1.1.4
sipxIfOutRipPkts mandatory
Number of IPX Routing Information Protocol packets
transmitted on this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.18.1.1.5
sipxIfInSapPkts mandatory
Number of IPX Service Advertising Protocol packets
received on this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.18.1.1.6
sipxIfOutSapPkts mandatory
Number of IPX Service Advertising Protocol packets
transmitted on this interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.18.1.1.7

sipxRouteTable

table mandatory
.1.3.6.1.4.1.97.3.18.2 · 1 row entry · 6 columns
Open in standard view 
This router's IPX Routing table.
sipxRouteEntry entry .1.3.6.1.4.1.97.3.18.2.1
A route to a particular destination.
Indexes
sipxRouteDest
Column Syntax OID
sipxRouteDest mandatory
The destination network address of this route.
OctetString .1.3.6.1.4.1.97.3.18.2.1.1
sipxRouteIfIndex mandatory
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified …
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.2.1.2
sipxRouteTickCount mandatory
The primary routing metric for this route, which is an
estimate of the number of 55 millisecond ticks that are
needed to reach the destination.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.2.1.3
sipxRouteHopCount mandatory
The secondary routing metric for this route, which is the
number of routers that must be traversed to reach the
destination.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.2.1.4
sipxRouteNextHop mandatory
The IPX node address of the next hop of this route,
if indirect. If direct, the address of the local
interface.
OctetString .1.3.6.1.4.1.97.3.18.2.1.5
sipxRouteAge mandatory
The number of seconds since this route was last
updated.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.2.1.6

sipxSapTable

table mandatory
.1.3.6.1.4.1.97.3.18.3 · 1 row entry · 7 columns
Open in standard view 
This router's IPX service advertising cache table.
sipxSapEntry entry .1.3.6.1.4.1.97.3.18.3.1
An IPX service definition, as advertised by the SAP
protocol and distributed through the SAP cache of
this router.
Indexes
sipxSapIndex
Column Syntax OID
sipxSapIndex mandatory
Used only as an artificial index to this table. Has no
independent meaning.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.3.1.1
sipxSapType mandatory
Identifies the type of service provided by the server.
Values range 0..ffff, and are defined by Novell.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.3.1.2
sipxSapName mandatory
Server Name.
OctetString .1.3.6.1.4.1.97.3.18.3.1.3
sipxSapNetwork mandatory
The IPX network address of the server providing the
indicated service.
OctetString .1.3.6.1.4.1.97.3.18.3.1.4
sipxSapNodeId mandatory
The IPX node address of the server. With NetWare 2.x,
this corresponds to a physical MAC address, represented
here in canonical (little-endian) bit order. With
NetWare 3.x, it is typically 00:00:00:00:00:01.
OctetString .1.3.6.1.4.1.97.3.18.3.1.5
sipxSapSocket mandatory
The socket number to which service requests should be
addressed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.3.1.6
sipxSapHopCount mandatory
A count of the number of routers that must be traversed
to reach this server.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.3.1.7

sipxsfTable

table mandatory
.1.3.6.1.4.1.97.3.18.6.2 · 1 row entry · 8 columns
Open in standard view 
This table defines the filtering criteria to be
applied to Netware service advertisements. There can
be no more than one filter per service name. Each
filter is identified by a simple integer, which
is more concise than the name if it were to be
used as an index.
sipxsfEntry entry .1.3.6.1.4.1.97.3.18.6.2.1
Defines the filtering criteria to be applied to a
particular service name.
Indexes
sipxsfIndex
Column Syntax OID
sipxsfIndex mandatory
Assigned by the configurer to identify this filter.
This index has no relationship to sipxSapIndex.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.6.2.1.1
sipxsfSAPName mandatory
The service name. `*' can be used as wild card character
which match all names.
OctetStringr/w .1.3.6.1.4.1.97.3.18.6.2.1.2
sipxsfSAPType mandatory
The service type. Minus one or 65535 indicates all services
of this name. Otherwise, the values are defined by Novell
and other service providers (e.g., file server = 4).
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.6.2.1.3
sipxsfAccessMode mandatory
Permitted(1) allows the service name to be accepted or
broadcasted. Denied(2) ignores the service name.
Invalid(3) invalidates the filter entry.
Enumerationr/w
Enumerated Values:
1permitted
2denied
3invalid
 .1.3.6.1.4.1.97.3.18.6.2.1.4
sipxsfFilterType mandatory
If entry(1), filter is for the incoming named service.
If exit(2), filter is for the outgoing named service.
Enumerationr/w
Enumerated Values:
1entry
2exit
 .1.3.6.1.4.1.97.3.18.6.2.1.5
sipxsfPortMap mandatory
A bit map defining port numbers to which the filter
is applied. Octet 1 specifies port 1 to 8, octet 2
specifies port 9 to 16, and so on. Within each octet,
the MSB maps to the lowerest port, and LSB maps to the
highest…
OctetStringr/w .1.3.6.1.4.1.97.3.18.6.2.1.6
sipxsfNetworks mandatory
A list of network addresses to which the filter is
applied. Each network address consists of 4 octets
(i.e. a LONG word). For filter with FilterType
entry(1), this parameter is ignored. Initial
implementation also ignor…
OctetStringr/w .1.3.6.1.4.1.97.3.18.6.2.1.7
sipxsfFiltered mandatory
Number of times the service has been filtered.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.18.6.2.1.8

sipxsrExplorerTable

table mandatory
.1.3.6.1.4.1.97.3.18.7.2 · 1 row entry · 3 columns
Open in standard view 
IPX SR explorer configuration Table.
sipxsrExplorerEntry entry .1.3.6.1.4.1.97.3.18.7.2.1
IPX SR explorer configuration for each port.
Indexes
sipxsrPort
Column Syntax OID
sipxsrPort mandatory
Port number.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.18.7.2.1.1
sipxsrStatus mandatory
valid(1) to configure explorer type; invalid(2) to remove
explorer configuration and default to STE.
Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.97.3.18.7.2.1.2
sipxsrExplorerType mandatory
use ARE or STE for explorer frame.
Enumerationr/w
Enumerated Values:
1are
2ste
 .1.3.6.1.4.1.97.3.18.7.2.1.3

srtrdiscTable

table mandatory
.1.3.6.1.4.1.97.3.19.1 · 1 row entry · 6 columns
Open in standard view 
This table contains configuration information controlling
operation of the router discovery protocol (RFC-1256).
srtrdiscEntry entry .1.3.6.1.4.1.97.3.19.1.1
Each entry in this table configures the router discovery
protocol for the particular interface.
Indexes
srtrdiscIfIndex
Column Syntax OID
srtrdiscIfIndex mandatory
Identifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.19.1.1.1
srtrdiscState mandatory
Specifies whether or not the router discovery protocol is
in use for this interface. Defaults to disabled(2).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.19.1.1.2
srtrdiscAdvertisementAddress mandatory
The IP address to be used for multicast router advertisements
for this interface. If multicast(1), the all-systems multicast
224.0.0.1 is used. If broadcast, the limited-broadcast
255.255.255.255 is used.
Enumerationr/w
Enumerated Values:
1multicast
2broadcast
 .1.3.6.1.4.1.97.3.19.1.1.3
srtrdiscAdvertisementInterval mandatory
The interval at which multicast router advertisements are to be
transmitted, in seconds. Allowable values range between 4
and 1800.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.19.1.1.4
srtrdiscLifetime mandatory
The value to be used for the Lifetime field of router
advertisements. Values range from srtrdiscAdvertisementInterval to
9000.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.19.1.1.5
srtrdiscPreference mandatory
The preferability of this interface's address as a default router,
relative to other routers on the same subnet.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.19.1.1.6

sipmRouteTable

table mandatory
.1.3.6.1.4.1.97.3.20.1.1 · 1 row entry · 6 columns
Open in standard view 
The (conceptual) table listing the origin routes that this
router learns from neighboring routers and from initial
installations of directly-connected routes. Origin is
defined to be the subnetwork that can originate multicast
packets.
sipmRouteEntry entry .1.3.6.1.4.1.97.3.20.1.1.1
An entry (conceptual row) representing information on an
origin route when IPM is enabled.
Indexes
sipmRouteOrigin sipmRouteOriginMask
Column Syntax OID
sipmRouteOrigin mandatory
The subnetwork address of the origin.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.20.1.1.1.1
sipmRouteOriginMask mandatory
The subnetwork mask of the origin.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.20.1.1.1.2
sipmRouteGateway mandatory
The next hop gateway toward the origin. This
object has the value 0.0.0.0 for directly-connected routes.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.20.1.1.1.3
sipmRouteMetric mandatory
The distance to this origin in number of hops.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.20.1.1.1.4
sipmRouteAge mandatory
The time left for this origin route before aged out.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.20.1.1.1.5
sipmRouteParents mandatory
The bitmapped incoming port(s) for which this origin is
learned. This is an octet string of length 8. The least
significant bit of the eighth octet is port 0. The least
significant bit of the seventh octet is port 9 and…
OctetString .1.3.6.1.4.1.97.3.20.1.1.1.6

sipmNeighborTable

table mandatory
.1.3.6.1.4.1.97.3.20.3.1 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table listing the neighboring routers
on each interface port.
sipmNeighborEntry entry .1.3.6.1.4.1.97.3.20.3.1.1
An entry (conceptual row) all neighbors which are learned
from this local interface port.
Indexes
sipmNeighborIfIndex sipmNeighbors
Column Syntax OID
sipmNeighborIfIndex mandatory
The ifIndex value of the interface for which this entry
contains information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.20.3.1.1.1
sipmNeighbors mandatory
The neighbor's IP address which was learned.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.20.3.1.1.2
sipmNeighborLastHeard mandatory
The elapsed time since the neighbor was last heard.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.20.3.1.1.3

sipmStatTable

table mandatory
.1.3.6.1.4.1.97.3.20.4.2 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table containing multicast routing
statistics for IP datagrams on a per port basis.
sipmStatEntry entry .1.3.6.1.4.1.97.3.20.4.2.1
An entry (conceptual row) containing the multicast routing
statistic for IP datagrams on a particular port.
Indexes
sipmStatIfIndex
Column Syntax OID
sipmStatIfIndex mandatory
The interface port number on which corresponding IPM
statistics gather.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.20.4.2.1.1
sipmInBadPackets mandatory
The number of bad packets received which may include
unknown DVMRP/IGMP messages, short packets, and checksum
errors.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.20.4.2.1.2
sipmCacheMiss mandatory
The number of times IP Multicast packets need to lookup
a route at the IP layer for determining forwarding path.
RFC1155-SMICounterr/w
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.20.4.2.1.3

sipcktTable

table mandatory
.1.3.6.1.4.1.97.3.21.1 · 1 row entry · 5 columns
Open in standard view 
Defines attributes of IP circuits. A circuit is defined
as a binding of a network number to a physical interface.
sipcktEntry entry .1.3.6.1.4.1.97.3.21.1.1
Defines the attributes of a binding of IP address and network to
physical interface.
Indexes
sipcktIndex sipcktIpAddress
Column Syntax OID
sipcktIndex mandatory
Identifies the physical interface. Identical to ifIndex.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.21.1.1.1
sipcktIpAddress mandatory
Identifies the IP network that is bound to this interface.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.21.1.1.2
sipcktState mandatory
The status of this binding.
Enumerationr/w
Enumerated Values:
1valid
2invalid
3invalid-all
4netmask-conflict
 .1.3.6.1.4.1.97.3.21.1.1.3
sipcktNetMask mandatory
The subnet mask for the network associated with this address
binding. If set to 0.0.0.0, will default to standard class
A/B/C mask, depending on the value of sipcktIpAddress.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.21.1.1.4
sipcktSourceRoute mandatory
Specifies the behavior of IP routing with respect to (link-layer)
source routing for this circuit. If default(1) then behavior depends
on whether the port is token ring or not. If token ring then
ARP requests are sent b…
Enumerationr/w
Enumerated Values:
1default
2sr
3no-sr
4both
 .1.3.6.1.4.1.97.3.21.1.1.5

sipNetToMediaTable

table mandatory
.1.3.6.1.4.1.97.3.22 · 1 row entry · 4 columns
Open in standard view 
An extension to the standard ipNetToMedia table,
containing other ARP cache attributes,
specifically the current source route to the
destination.
sipNetToMediaEntry entry .1.3.6.1.4.1.97.3.22.1
Each entry contains one IpAddress to `physical'
address equivalence. Entries in this table exist
even when there is no source route attached.
Indexes
sipNetToMediaIfIndex sipNetToMediaNetAddress
Column Syntax OID
sipNetToMediaIfIndex mandatory
The interface on which this entry's equivalence
is effective. The interface identified by a
particular value of this index is the same
interface as identified by the same value of
ifIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.22.1.1
sipNetToMediaNetAddress mandatory
The IpAddress corresponding to the media-
dependent `physical' address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.22.1.2
sipNetToMediaSourceRoute mandatory
The source route to this destination.
OctetString .1.3.6.1.4.1.97.3.22.1.3
sipNetToMediaAge mandatory
The age, in seconds, of the entry to this destination.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.22.1.4

profileTable

table mandatory
.1.3.6.1.4.1.97.3.23.1 · 1 row entry · 6 columns
Open in standard view
profileEntry entry .1.3.6.1.4.1.97.3.23.1.1
There may be up to 16,368 entries.
A profile consists of up to 16 entries, all with
the same value for profileIndex.
and there may be no more than 1,023 profiles.
Entries are added by setting the profileType
field to va…
Indexes
profileIndex profileSourceStart profileSourceEnd profileDestStart profileDestEnd
Column Syntax OID
profileIndex mandatory
A value from 1 to 1,023. All entries with the
same profileIndex are part of the same profile.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.23.1.1.1
profileSourceStart mandatory
Acceptable lowest value for the source port of
a UDP or TCP packet.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.97.3.23.1.1.2
profileSourceEnd mandatory
Acceptable highest value for the source port of
a UDP or TCP packet.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.97.3.23.1.1.3
profileDestStart mandatory
Acceptable lowest value for the destination port of
a UDP or TCP packet.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.97.3.23.1.1.4
profileDestEnd mandatory
Acceptable highest value for the destination port of
a UDP or TCP packet.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.97.3.23.1.1.5
profileType mandatory Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.97.3.23.1.1.6

ruleTable

table mandatory
.1.3.6.1.4.1.97.3.23.2 · 1 row entry · 19 columns
Open in standard view
ruleEntry entry .1.3.6.1.4.1.97.3.23.2.1
There may be up to 8,000 entries.
Rules with 255.255.255.255 for both
masks are accessed quickly; other
rules are accessed less quickly.
When adding a rule, at least one field
must be specified, since there
are defval …
Indexes
ruleIndex ruleSourceIp ruleDestIp ruleSourceIpMask ruleDestIpMask
Column Syntax OID
ruleIndex mandatory
An ES/1 port number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.23.2.1.1
ruleSourceIp mandatory
Source IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.23.2.1.2
ruleDestIp mandatory
Destination IP address.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.23.2.1.3
ruleSourceIpMask mandatory
Mask to apply to the packet before comparing to ruleSourceIp.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.23.2.1.4
ruleDestIpMask mandatory
Mask to apply to the packet before comparing to ruleSourceIp.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.23.2.1.5
ruleType mandatory Enumerationr/w
Enumerated Values:
1valid
2invalid
 .1.3.6.1.4.1.97.3.23.2.1.6
ruleUdpProfile mandatory
Which profile to use (i.e., the value of profileIndex) for
UDP packets. A value of 0 means no profile, i.e., filter
all packets. This rule only applies to packets with a
fragment offset of zero.
Integer32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.97.3.23.2.1.7
ruleTcpProfile mandatory
Which profile to use (i.e., the value of profileIndex) for
TCP packets for non-established sessions. A non-established
session is indicated by neither the ACK nor RST bit being set
in the TCP packet. A value of 0 mean…
Integer32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.97.3.23.2.1.8
ruleTcpEstProfile mandatory
Which profile to use (i.e., the value of profileIndex) for
TCP packets for established sessions. An established session
is indicated by the ACK or RST bit being set in the TCP
packet. A value of 0 means no profile, i.…
Integer32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.97.3.23.2.1.9
ruleFilterUdpFragment mandatory
Whether to filter UDP packets with a non-zero IP fragment offset.
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.10
ruleFilterTcpFragment mandatory
Whether to filter TCP packets with a non-zero IP fragment offset.
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.11
ruleFilterIpOption mandatory
Whether to filter packets with an IP header length of other
than 5.
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.12
ruleAllowIcmp mandatory
Whether to forward ICMP packets (IP protocol 1).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.13
ruleAllowIpWithinIp mandatory
Whether to forward IP encapsulated within IP packets
(IP protocol 4).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.14
ruleAllowEgp mandatory
Whether to forward EGP packets (IP protocol 8).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.15
ruleAllowIgp mandatory
Whether to forward IGP packets (IP protocol 9).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.16
ruleAllowIgrp mandatory
Whether to forward IGP packets (IP protocol 88).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.17
ruleAllowOspf mandatory
Whether to forward OSPF packets (IP protocol 89).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.18
ruleAllowAnyOther mandatory
Whether to forward all other types of IP packets
(i.e., other than UDP, TCP, ICMP, IP encapsulated,
EGP, IGP, IGRP, and OSPF).
Booleanr/w
Textual Convention: Boolean Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.97.3.23.2.1.19

spvcTable

table mandatory
.1.3.6.1.4.1.97.3.24.1 · 1 row entry · 7 columns
Open in standard view 
This table maps pseudo-port indices to permanent virtual
circuits.
spvcEntry entry .1.3.6.1.4.1.97.3.24.1.1
Each entry in this table describes one permanent virtual
circuit.
Indexes
spvcIfIndex
Column Syntax OID
spvcIfIndex mandatory
Identifies the virtual interface (port) on which this
virtual circuit exists. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.1
spvcPathRX mandatory
Where virtual circuit identifiers are split into two
parts, as in ATM, this is the most-significant part, and
is identical to the ATM virtual path identifier.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.2
spvcCircuitRX mandatory
Where virtual circuit identifiers are split into two
parts, as in ATM, this is the least-significant part, and
is identical to the ATM virtual circuit identifier.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.3
spvcPathTX mandatory
Where virtual circuit identifiers are split into two
parts, as in ATM, this is the most-significant part, and
is identical to the ATM virtual path identifier.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.4
spvcCircuitTX mandatory
Where virtual circuit identifiers are split into two
parts, as in ATM, this is the least-significant part, and
is identical to the ATM virtual circuit identifier.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.5
spvcState mandatory
Controls the existence of this table entry.
Enumerationr/w
Enumerated Values:
1exists
2removed
 .1.3.6.1.4.1.97.3.24.1.1.6
spvcPhysPort mandatory
Identifies the physical interface (port) on which this
virtual circuit exists. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.24.1.1.7

strunkTable

table mandatory
.1.3.6.1.4.1.97.3.25.1 · 1 row entry · 8 columns
Open in standard view 
This table describes the trunking status and attributes of
the interfaces that are configured for bridge trunking.
strunkEntry entry .1.3.6.1.4.1.97.3.25.1.1
An entry exists in this table for each physical interface
(port) that is configured for trunking.
Indexes
strunkIfIndex
Column Syntax OID
strunkIfIndex mandatory
Identifies a physical interface (port) which is
configured for LAN trunking. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification values in related MIBs.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.25.1.1.1
strunkState mandatory
If off(1) then this link has not been enabled for trunking.
If closed(2) then this link has not yet received any Trunking
PDUs. If oneway(3) then incoming Trunking PDUs do not indicate
that our PDUs are being successful…
Enumeration
Enumerated Values:
1off
2closed
3oneway
4joined
5perturbed
6helddown
7broken
 .1.3.6.1.4.1.97.3.25.1.1.2
strunkRemoteBridgeAddr mandatory
The MAC address portion of the bridge ID of the remote bridge.
OctetString .1.3.6.1.4.1.97.3.25.1.1.3
strunkRemoteIp mandatory
The IP address of the remote bridge, as reported by that
bridge for administrative purposes.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.25.1.1.4
strunkLastError mandatory
The last reason for failure when the link is in closed, oneway, or
helddown state.
Enumeration
Enumerated Values:
1none
2in-bpdu
3multiple-bridges
4ack-lost
5standby
6too-many-groups
7no-ack
8perturbed-threshold
9self-connect
10port-moved
11multiple-lan-types
 .1.3.6.1.4.1.97.3.25.1.1.5
strunkLinkOrdinal mandatory
The position of this link within the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.25.1.1.6
strunkLinkCount mandatory
The number of links within the trunk group.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.25.1.1.7
strunkLastChange mandatory
The number of seconds since strunkState changed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.25.1.1.8

ipMRouteTable

table mandatory
.1.3.6.1.4.1.97.3.26.1.1.2 · 1 row entry · 12 columns
Open in standard view 
The (conceptual) table containg multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router.
ipMRouteEntry entry .1.3.6.1.4.1.97.3.26.1.1.2.1
An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.
Indexes
ipMRouteGroup ipMRouteSource ipMRouteSourceMask
Column Syntax OID
ipMRouteGroup mandatory
The IP multicast group address for which this entry
contains multicast routing information.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.26.1.1.2.1.1
ipMRouteSource mandatory
The source network address for which this entry contains
multicast routing information.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.26.1.1.2.1.2
ipMRouteSourceMask mandatory
The network mask of the source address for which this entry
contains multicast routing information.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.26.1.1.2.1.3
ipMRouteRpfNeighbor mandatory
The address of the RPF neighbor from which IP datagrams
from this source to this multicast address are received.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.26.1.1.2.1.4
ipMRouteInIfIndex mandatory
The value of ifIndex for the interface on which IP
datagrams sent by this source to this multicast address are
received.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.26.1.1.2.1.5
ipMRouteOutList mandatory
The value of ipMRouteNextHopList which identifies the list
of entries in the ipMRouteNextHopTable representing outgoing
interfaces to which IP datagrams from this source to this
multicast group address are forwarded.
OctetString .1.3.6.1.4.1.97.3.26.1.1.2.1.6
ipMRouteUpTime mandatory
The time since the multicast routing information
represented by this entry was learned by the router.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.26.1.1.2.1.7
ipMRouteExpiryTime mandatory
The minimum amount of time remaining before this entry will
be aged out.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.26.1.1.2.1.8
ipMRoutePkts mandatory
The number of packets which this router has received from
this source and addressed to this multicast group address.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.26.1.1.2.1.9
ipMRouteRpfFails mandatory
The number of packets which this router has received from
this source and addressed to this multicast group address,
which were not received from the interface indicated by
ipMRouteInIfIndex.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.26.1.1.2.1.10
ipMRouteOctets mandatory
The number of octets contained in IP datagrams which were
received from this source and addressed to this multicast
group address, and which were forwarded by this router.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.26.1.1.2.1.11
ipMRouteNextHopState mandatory
An indication of whether the outgoing interface and next
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' ind…
Enumeration
Enumerated Values:
1pruned
2forwarding
 .1.3.6.1.4.1.97.3.26.1.1.2.1.12

ipMRouteInterfaceTable

table mandatory
.1.3.6.1.4.1.97.3.26.1.1.3 · 1 row entry · 2 columns
Open in standard view 
The (conceptual) table containg multicast routing
information specific to interfaces.
ipMRouteInterfaceEntry entry .1.3.6.1.4.1.97.3.26.1.1.3.1
An entry (conceptual row) containing the multicast routing
information for a particular interface.
Indexes
ipMRouteInterfaceIfIndex
Column Syntax OID
ipMRouteInterfaceIfIndex mandatory
The ifIndex value of the interface for which this entry
contains information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.26.1.1.3.1.1
ipMRouteInterfaceTtl mandatory
The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.26.1.1.3.1.2

igmpInterfaceTable

table mandatory
.1.3.6.1.4.1.97.3.27.1.1.1 · 1 row entry · 3 columns
Open in standard view 
The (conceptual) table listing the interfaces on which IGMP
is enabled.
igmpInterfaceEntry entry .1.3.6.1.4.1.97.3.27.1.1.1.1
An entry (conceptual row) representing an interface on
which IGMP is enabled.
Indexes
igmpInterfaceIfIndex
Column Syntax OID
igmpInterfaceIfIndex mandatory
The interface for which IGMP is enabled.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.1.1.1
igmpInterfaceQueryInterval mandatory
The frequency at which IGMP Host-Query packets are
transmitted on this interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.1.1.2
igmpInterfaceStatus mandatory
The activation of a row enables IGMP on the interface. The
destruction of a row disables IGMP on the interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.1.1.3

igmpCacheTable

table mandatory
.1.3.6.1.4.1.97.3.27.1.1.2 · 1 row entry · 7 columns
Open in standard view 
The (conceptual) table listing the IP multicast groups for
which there are members on a particular interface.
igmpCacheEntry entry .1.3.6.1.4.1.97.3.27.1.1.2.1
An entry (conceptual row) in the igmpCacheTable.
Indexes
igmpCacheAddress igmpCacheIfIndex
Column Syntax OID
igmpCacheAddress mandatory
The IP multicast group address for which this entry
contains information.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.27.1.1.2.1.1
igmpCacheIfIndex mandatory
The interface for which this entry contains information for
an IP multicast group address.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.2.1.2
igmpCacheSelf mandatory
An indication of whether the local system is a member of
this group address on this interface.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.2.1.3
igmpCacheLastReporter mandatory
The IP address of the source of the last membership report
received for this IP Multicast group address on this
interface. If no membership report has been received, this
object has the value 0.0.0.0.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.27.1.1.2.1.4
igmpCacheUpTime mandatory
The time since the system joined this group address, or
zero if the system is not currently a member.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.27.1.1.2.1.5
igmpCacheExpiryTime mandatory
The minimum amount of time remaining before this entry will
be aged out.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.27.1.1.2.1.6
igmpCacheStatus mandatory
The status of this entry.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.27.1.1.2.1.7

slogEntryTable

table mandatory
.1.3.6.1.4.1.97.3.28.5 · 1 row entry · 4 columns
Open in standard view 
This table contains the event logging entries.
slogEntry entry .1.3.6.1.4.1.97.3.28.5.1
Indexes
slogIndex
Column Syntax OID
slogIndex mandatory
The index of the logging entry in the logging entry table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.28.5.1.1
slogEntryTimeStamp mandatory
The time at which the event logging entry was generated.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.28.5.1.2
slogEntryMessageText mandatory
The text of the eventlogging entry message.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.28.5.1.3
slogEntryName mandatory
The name of the event logging entry.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.28.5.1.4

strapControlTable

table mandatory
.1.3.6.1.4.1.97.3.29.1 · 1 row entry · 4 columns
Open in standard view 
This table contains information about the severity of each trap
and whether the trap is currently enabled.
strapControl entry .1.3.6.1.4.1.97.3.29.1.1
Indexes
strapIndex
Column Syntax OID
strapIndex mandatory
The specific trap number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.29.1.1.1
strapEnabled mandatory
Enable or disable the generation of this trap.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.97.3.29.1.1.2
strapSeverity mandatory
A user-definable severity, indicating the importance of the
trap.
Enumerationr/w
Enumerated Values:
1informational
2warning
3minor
4major
5critical
 .1.3.6.1.4.1.97.3.29.1.1.3
strapText mandatory
A description of the trap.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.29.1.1.4

strapSeverityControlTable

table mandatory
.1.3.6.1.4.1.97.3.29.2 · 1 row entry · 2 columns
Open in standard view 
This table contains information about the whether a class of
traps of a particular severity are enabled or disabled.
strapSeverityControl entry .1.3.6.1.4.1.97.3.29.2.1
Indexes
strapSeveritySeverity
Column Syntax OID
strapSeveritySeverity mandatory
A user-definable severity, indicating the importance of the
trap.
Enumeration
Enumerated Values:
1informational
2warning
3minor
4major
5critical
 .1.3.6.1.4.1.97.3.29.2.1.1
strapSeverityEnable mandatory
Enable or disable all traps of a given severity level.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.29.2.1.2

strapTable

table mandatory
.1.3.6.1.4.1.97.3.29.7 · 1 row entry · 5 columns
Open in standard view 
This table contains the latest traps that have been generated.
strapEntry entry .1.3.6.1.4.1.97.3.29.7.1
Indexes
strapEntryIndex
Column Syntax OID
strapEntryIndex mandatory
A number representing the order in which the trap occurred
in time. This 32 bit number can wrap.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.29.7.1.1
strapEntryTimeStamp mandatory
The time at which the trap occurred.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.29.7.1.2
strapEntryText mandatory
A description of the trap.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.29.7.1.3
strapNumber mandatory
The specific-trap number, as specified in the TRAP PDU.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.29.7.1.4
strapEntrySeverity mandatory
A user-definable severity, indicating the importance of the
trap.
Enumeration
Enumerated Values:
1informational
2warning
3minor
4major
5critical
 .1.3.6.1.4.1.97.3.29.7.1.5

sWorkGroupTable

table mandatory
.1.3.6.1.4.1.97.3.31.4 · 1 row entry · 7 columns
Open in standard view 
This table contains work group definitions for the interfaces.
sWorkGroupEntry entry .1.3.6.1.4.1.97.3.31.4.1
Each entry in this table contains a definition of a work group.
Indexes
sWorkGroupNumber
Column Syntax OID
sWorkGroupNumber mandatory
An integer that identifies the work group, used as an index
to this table.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.31.4.1.1
sWorkGroupName mandatory
A 1-16 character work group name.
RFC1213-MIBDisplayStringr/w
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.97.3.31.4.1.2
sWorkGroupPorts mandatory
A list of all ports within the group. The first
octet specified ports 1-8, the second 9-16, etc.
OctetStringr/w .1.3.6.1.4.1.97.3.31.4.1.3
sWorkGroupType mandatory
The type of work group:
all - no additional information needs to be supplied.
ip - the IP network (and optionally, IP mask) must be supplied.
ipx - the IPX network number may be supplied, or else all IPX
network n…
Enumerationr/w
Enumerated Values:
1ip
2ipx
3all
4invalid
 .1.3.6.1.4.1.97.3.31.4.1.4
sWorkGroupIpAddress mandatory
The IP network address.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.31.4.1.5
sWorkGroupIpMask mandatory
The IP network mask, if set to 0, the default network mask is applied.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.31.4.1.6
sWorkGroupIpxNetwork mandatory
The IPX network number, 0 means all networks.
OctetStringr/w .1.3.6.1.4.1.97.3.31.4.1.7

spingTable

table mandatory
.1.3.6.1.4.1.97.3.32.2 · 1 row entry · 13 columns
Open in standard view 
The set of information describing the active ping requests and
their results.
spingEntry entry .1.3.6.1.4.1.97.3.32.2.1
The parameters, state and results of a ping request.
Indexes
spingNMSAddr spingDestAddr
Column Syntax OID
spingNMSAddr mandatory
The IP address of the NMS, used to determine which ping
request to return information on.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.32.2.1.1
spingDestAddr mandatory
The IP address which is to be the destination of the ping
ECHO_REQUEST. This variable cannot be set while
spingOperation is on.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.32.2.1.2
spingState mandatory
The current state of the ping request.
Enumeration
Enumerated Values:
0not-started
1active
2timed-out
3completed
 .1.3.6.1.4.1.97.3.32.2.1.3
spingCount mandatory
The number of ping requests which are to be sent. This
variable cannot be set while spingOperation is on.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.32.2.1.4
spingDataSize mandatory
The datagram packet size which will be sent with the
ECHO_REQUEST, in bytes. This variable cannot be set while
spingOperation is on.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.32.2.1.5
spingWait mandatory
The time, in centiseconds, between the sending of each
ECHO_REQUEST message. This variable cannot be set while
spingOperation is on.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.32.2.1.6
spingTimeout mandatory
The time, in centiseconds, since the last ECHO_RESPONSE
was received (or the last ECHO_REQUEST was sent, if there
have been no responses) when the ping request will time out.
This variable cannot be set while spingOpera…
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.32.2.1.7
spingOperation mandatory
Setting spingOperation to on will begin the ping request.
Setting spingOperation to off will terminate the ping request.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.97.3.32.2.1.8
spingMin mandatory
The minimum round trip time for the ping requests and
responses, in centiseconds.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.32.2.1.9
spingMax mandatory
The maximum round trip for the ping requests and
responses, in centiseconds.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.32.2.1.10
spingAvg mandatory
The average round trip time for the ping requests and
responses, in centiseconds.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.32.2.1.11
spingNumTransmitted mandatory
The number of ICMP ECHO_REQUEST messages that have
been transmitted during this ping request.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.32.2.1.12
spingNumReceived mandatory
The number of ICMP ECHO_RESPONSE messages that have
been received as a result of this ping request.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.32.2.1.13

straceTable

table mandatory
.1.3.6.1.4.1.97.3.33.2 · 1 row entry · 12 columns
Open in standard view 
The set of information describing the active traceroute requests
and their results.
straceEntry entry .1.3.6.1.4.1.97.3.33.2.1
The parameters, state, and results of a traceroute request.
Indexes
straceNMSAddr straceDestAddr straceHop straceProbe
Column Syntax OID
straceNMSAddr mandatory
The IP address of the NMS, used to determine which traceroute
request to return information on.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.33.2.1.1
straceDestAddr mandatory
The IP address which is to be the destination of the traceroute
request.This variable cannot be set while straceOperation is on.
RFC1155-SMIIpAddressr/w
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.33.2.1.2
straceMaxTTL mandatory
The maximum time-to-live for outgoing traceroute probe
packets. This determines the number of hops that can be in a
traceroute. This variable cannot be set while straceOperation
is on.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.33.2.1.3
straceDataSize mandatory
The size of the datagram sent with each probe. This variable
cannot be set while straceOperation is on.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.33.2.1.4
straceNumProbes mandatory
The number of probes which are sent for each hop. This
variable cannot be set while straceOperation is on.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.33.2.1.5
straceWait mandatory
The time to wait in response to a probe. This variable cannot be
set while straceOperation is on.
RFC1155-SMITimeTicksr/w
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.33.2.1.6
straceOperation mandatory
Setting straceOperation to on will begin the traceroute request.
Setting straceOperation to off will terminate the traceroute
request.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.97.3.33.2.1.7
straceHop mandatory
The hop count for a set of probes with a particular TTL.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.33.2.1.8
straceHopAddress mandatory
The IP address of the host which responded for a probe with a
particular TTL.
RFC1155-SMIIpAddress
Textual Convention: RFC1155-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.97.3.33.2.1.9
straceProbe mandatory
The probe instance for a particular hop.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.33.2.1.10
straceState mandatory
The current state of the trace probe.
Enumeration
Enumerated Values:
0not-started
1active
2time-exceeded
3host-unreachable
4net-unreachable
5completed
 .1.3.6.1.4.1.97.3.33.2.1.11
straceTime mandatory
Round trip time of a probe for a particular hop.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.97.3.33.2.1.12

nbCacheifTable

table mandatory
.1.3.6.1.4.1.97.3.35.3 · 1 row entry · 2 columns
Open in standard view
nbCacheifEntry entry .1.3.6.1.4.1.97.3.35.3.1
Indexes
nbCacheIfIndex
Column Syntax OID
nbCacheIfIndex mandatory
This is the primary index into the Netbios Interface
Table. It is the port number which you intend to
enable/disable Netbios Caching.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.3.35.3.1.1
nbCacheIfOperStatus mandatory
Indicates the operating state of netbios name caching
for this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.97.3.35.3.1.2

atextportTable

table mandatory
.1.3.6.1.4.1.97.6.2.1 · 1 row entry · 5 columns
Open in standard view 
A list of AppleTalk ports for this entity.
atextportEntry entry .1.3.6.1.4.1.97.6.2.1.1
The description of one of the AppleTalk
ports on this entity.
Indexes
atextportIndex
Column Syntax OID
atextportIndex mandatory
A unique value for each AppleTalk port.
Its value is between 1 and the total number of
AppleTalk ports. The value for each port must
remain constant at least from the
re-initialization of the entity's network
management…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.6.2.1.1.1
atextportNetStart mandatory
The first AppleTalk network address in the
configured range for this port. This is a two octet
DDP network address in network byte order.
OctetString .1.3.6.1.4.1.97.6.2.1.1.2
atextportNetEnd mandatory
The last AppleTalk network address in the
configured range for this port. This is a two octet
DDP network address in network byte order.
OctetString .1.3.6.1.4.1.97.6.2.1.1.3
atextportNetAddress mandatory
The AppleTalk network address configured for this
port.
OctetString .1.3.6.1.4.1.97.6.2.1.1.4
atextportZone mandatory
The default zone name configured for this AppleTalk
port.
OctetString .1.3.6.1.4.1.97.6.2.1.1.5

atextportzipTable

table mandatory
.1.3.6.1.4.1.97.6.2.2 · 1 row entry · 3 columns
Open in standard view 
The table of zone information configured
for a port.
atextportzipEntry entry .1.3.6.1.4.1.97.6.2.2.1
An entry of zone information for a particular
zone and port combination.
Indexes
atextportZonePort atextportZoneIndex
Column Syntax OID
atextportZonePort mandatory
A unique value for each AppleTalk port.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.6.2.2.1.1
atextportZoneIndex mandatory
An integer that is unique to the ZoneName
that is present in this entry. For any given
zone name, every Entry that has an equal zone
name will have the same ZoneIndex.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.97.6.2.2.1.2
atextportZoneName mandatory
The ASCII zone name of this entry.
OctetString .1.3.6.1.4.1.97.6.2.2.1.3