sprotoNetbiosTranslate

CTATX-MIB · .1.3.6.1.4.1.97.3.17.1.1.18
MIB view Table view

Object

column mandatory r/w Enumeration 
Specifies whether, when bridging Netbios packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridged as is, with route-
discovery proceeding as expected. If stripRif(2), then
the routing information field is stripped before being
propagated. This option allows non-source-routing
(e.g., Ethernet) Netbios hosts to communicate tran-
sparently. If passBoth(3), then both the original
source-routed frame and the transparent equivalent are
propagated. This choice provides maximum connectivity
at some expense in network traffic. None(4) is identical
to passRif.
              
This option applies only to token ring ports.

Context

MIB
CTATX-MIB
OID
.1.3.6.1.4.1.97.3.17.1.1.18
Type
column
Access
readwrite
Status
mandatory
Parent
sprotoEntry
Table
sprotoTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1passRif
2stripRif
3passBoth
4none

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sprotoIfIndex mandatory
Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification valu…
columnInteger32.1.3.6.1.4.1.97.3.17.1.1.1
sprotoAppleTranslate mandatory
Specifies whether, when bridging AppleTalk ELAP, TLAP, and AARP frames, those frames are to be translated between token ring and Ethernet format before being forwarded. …
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.10
sprotoIbmLlcTranslate mandatory
Specifies whether, when bridging IBM LLC frames, an 8209-style translation between token ring and Ethernet format is to be performed before being forwarded. This op…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.11
sprotoRip mandatory
Specifies whether the internet Routing Information Protocol (RFC-1058) is to be used over this port. Only valid if sprotoIpRoute is enabled.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.12
sprotoEgp mandatory
Specifies whether the internet External Gateway Proto- col (RFC-904) is to be used over this port. Only valid if sprotoIpRoute is enabled.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.13
sprotoOspf mandatory
Specifies whether the internet Open Shortest Path First protocol (RFC-1247) is to be used over this port. Only valid if sprotoIpRoute is enabled.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.14
sprotoArpProxy mandatory
Specifies whether the port is to respond to internet ARP requests for which the unit is the next hop in a routed path. Only valid if sprotoIpRoute is enabled.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.15
sprotoIbm8209Lsaps mandatory
Specifies up to eight LSAPs for which IBM 8209-style token-ring-to-Ethernet encapsulation is to be performed. Only valid if sprotoIbmLLcTranslate is enabled. This o…
columnOctetString.1.3.6.1.4.1.97.3.17.1.1.16
sprotoBootpRelay mandatory
Specifies whether or not this port is to relay BOOTP packets, as described in RFC-951 and subsequent internet-drafts. Only valid if IP routing is also enabled for this interface.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.17
sprotoIpMulticast mandatory
Specifies whether the internet Multicast Routing Protocol (RFC-1075) is to be used over this port. Only valid if sprotoIpRoute is enabled.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.19
sprotoBridge mandatory
Defines the bridging method to be applied to frames received at, or destined for, this port. Ethernet and FDDI ports may be configured for transparent, srt, or none. Token Ring p…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.2
sprotoTrunking mandatory
Specifies whether SMC's trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.20
sprotoIpxSrTranslate mandatory
Specifies whether, when bridging IPX packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame is bridg…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.22
sprotoAllTranslate mandatory
Specifies whether, when bridging any source-routed explorer frames, the routing information is to be stripped or propagated. If passRif(1), the frame is bridged as is, with …
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.23
sprotoSteHopCountAppliedRule mandatory
hopcountnotapplied(1), STE hop count rules are not applied to STE frames. Default for SR ports. Follows IBM's specifications. hopcountapplied(2), STE hop count rules a…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.24
sprotoSuppressBpdus mandatory
Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets and source-routing spanning tree packets are transmitted as usu…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.3
sprotoIpRoute mandatory
Specifies whether or not this port is to be used for IP routing.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.4
sprotoIpxRoute mandatory
Specifies whether or not this port is to be used for Novell NetWare IPX routing.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.5
sprotoAppleRoute mandatory
Specifies whether or not this port is to be used for AppleTalk (tm) routing.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.6
sprotoArpTranslate mandatory
These options are intended to compensate for any like- ly implementation of internet ARP on 802.5 token ring. If set to bitswap1(2), then embedded MAC addresses for ARP packets wi…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.7
sprotoArpSourceRoute mandatory
Specifies whether, when bridging TCP/IP ARP packets which are source-routing explorer frames, the routing information is to be stripped or propagated. If pass- Rif(1), the frame i…
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.8
sprotoIpxTranslate mandatory
Specifies whether, when bridging Novell IPX frames, they are to be translated to Ethernet-like frame for- mat. This option applies only to token ring ports.
columnEnumeration.1.3.6.1.4.1.97.3.17.1.1.9