hwPortType
CTATX-MIB ·
.1.3.6.1.4.1.97.3.1.2.1.9
Object
column
mandatory
OctetString
This is a variable-length byte array, where each element represents the port types belonging to this module. The Packet Processing Engine's ports are fixed as 'uart' for the first port, and 'none' for any other ports. The Turbo's ports are fixed as 'none' for all ports. The following port types are supported: none (0) there is no port csma (1) Ethernet or 802.3 port fddi-das (2) FDDI DAS port fddi-sas (3) FDDI SAS port tpr (4) Token Passing Ring port wan (5) Wide Area Network port uart (6) UART port
Context
- MIB
- CTATX-MIB
- OID
.1.3.6.1.4.1.97.3.1.2.1.9- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- hwEntry
- Table
- hwSlotTable
- Siblings
- 24
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwIndex mandatory The slot number, beginning with 1 for the top-most slot.
This number always matches the instance of the hwEntry.
For example, {hwIndex 3} contains the value '3'. | column | Integer32 | .1.3.6.1.4.1.97.3.1.2.1.1 |
| hwPortStatus mandatory This is a variable-length byte array, where each element
represents the status of the port belonging to this module.
Values of 01 (status-good) or hex ff (status-bad) are supporte… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.10 |
| hwUsePort mandatory | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.11 |
| hwDefPortType mandatory This is a variable-length byte array, where each element
represents the port types defined for the module. If
hwDefPortType does not match hwPortType, then the port
will not be us… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.12 |
| hwAddr1 mandatory The unique hard-wired 48 bit MAC address for the module's
1st port. For the Packet Processing Engine, it's a unique
MAC address to be used as part of the ES/1's Spanning
Tree Brid… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.13 |
| hwAddr2 mandatory The unique hard-wired 48 bit MAC address for the module's
2nd port, only applicable for IOMs. | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.14 |
| hwAddr3 mandatory The unique hard-wired 48 bit MAC address for the module's
3rd port, only applicable for IOMs. | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.15 |
| hwAddr4 mandatory The unique hard-wired 48 bit MAC address for the module's
4th port, only applicable for IOMs. | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.16 |
| hwTempOK mandatory The temperature condition of the module, where True
indicates temperature okay, and False indicates
temperature too hot. | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.17 |
| hwFirstPort mandatory The ifIndex number of the first port which resides within
this module. [Not applicable for the Turbo.] | column | Integer32 | .1.3.6.1.4.1.97.3.1.2.1.18 |
| hwFatalErr mandatory This is a 32 byte array which contains information about
the cause of the module's last unexpected self-reset,
since the ES/1 booted.For the Packet Processing
Engine and Turbo, th… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.19 |
| hwType mandatory The module type of the slot's most recent occupant
since the ES/1 was started. The values for hwType
correspond to the values for hwPortType. | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.2 |
| hwRptrPorts mandatory This is a variable-length byte array, where each element
represents the repeater capability of the port belonging
to this module. The element value is zero if the port is
not pres… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.20 |
| hwPortSubType mandatory This is a variable-length byte array, where each element
represents additional port type information. | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.21 |
| hwAddr5 mandatory | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.22 |
| hwAddr6 mandatory | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.23 |
| hwAddr7 mandatory | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.24 |
| hwAddr8 mandatory | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.25 |
| hwUseMod mandatory Whether to use this module, not applicable for the
Packet Processing Engine. The value of hwUseMod is not
saved if the ES/1 reboots. If the module fails
diagnostics, it will not b… | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.3 |
| hwDefType mandatory The module type defined for the slot. Certain
pre-defined relationships exist. Slot 1 always contains
the Packet Processing Engine board. Slots 2-6 are either
unoccupied, or conta… | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.4 |
| hwDiagStatus mandatory Results of diagnostics, when diagnostics were last
performed on the module (whenever a module is released
from reset, which is usually at power-up). | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.5 |
| hwInuse mandatory Whether the module is currently executing its operational
software. | column | Enumeration | .1.3.6.1.4.1.97.3.1.2.1.6 |
| hwDiagCode mandatory Additional diagnostics information concerning the slot's
module. The meaning of hwDiagCode depends upon the slot's
module type described by the hwType parameter. For the
Packet Pr… | column | Integer32 | .1.3.6.1.4.1.97.3.1.2.1.7 |
| hwManufData mandatory This is a 24 byte array which contains the part number,
serial number and hardware revision level of this
module. The Turbo's hwManufData will be all blanks since
it is manufactur… | column | OctetString | .1.3.6.1.4.1.97.3.1.2.1.8 |