lpbkDestAddr
CTATX-MIB ·
.1.3.6.1.4.1.97.3.13.1.1.3
Object
column
mandatory
r/w
OctetString
The MAC address of the target device, only needed for remote loopback.
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lpbkIndex mandatory The port number, beginning with 1 for the first port. | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.1 |
| lpbkErrorBadReceives mandatory The number of transmitted packets which were received with
different data patterns. This number is automatically reset to
zero, whenever loopback operation is initiated. | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.13.1.1.10 |
| lpbkErrorSize mandatory The length of the last loopback packet which caused either
lpbkErrorNoReceives or lpbkErrorBadReceives to be incremented.
This number is automatically reset to zero, whenever loop… | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.11 |
| lpbkErrorSent mandatory The transmitted bytes (0-4) of data within the last loopback
packet which caused lpbkErrorBadReceives to be incremented.
This parameter is automatically reset to the null string,
… | column | OctetString | .1.3.6.1.4.1.97.3.13.1.1.12 |
| lpbkErrorReceived mandatory The received bytes (0-4) of data within the last loopback
packet which caused lpbkErrorBadReceives to be incremented.
This parameter is automatically reset to the null string,
whe… | column | OctetString | .1.3.6.1.4.1.97.3.13.1.1.13 |
| lpbkErrorOffset mandatory The byte offset (one being the first byte) within the loopback
packet where lpbkErrorSent begins. This number is automatically
reset to zero, whenever loopback operation is initia… | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.14 |
| lpbkOperation mandatory The type of loopback being performed. Setting lpbkOperation to
loopback-off causes loop back operation to terminate. Setting
lpbkOperation to loopback-local or loopback-remote cau… | column | Enumeration | .1.3.6.1.4.1.97.3.13.1.1.2 |
| lpbkPktNum mandatory The number of loopback packets to be transmitted. | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.4 |
| lpbkInterval mandatory The desired time delay between the reception of a looped back
packet, and the transmission of the next packet to be looped
back. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.97.3.13.1.1.5 |
| lpbkPktLength mandatory The length (in octets) of the loopback packet. The values of
the data itself are automatically selected by the ES/1. | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.6 |
| lpbkIncrements mandatory The number of bytes of data to be added to the loopback packet
after each successful loopback packet transmission and
reception. When the port's maximum packet size has been reach… | column | Integer32 | .1.3.6.1.4.1.97.3.13.1.1.7 |
| lpbkGoods mandatory The number of packets successfully looped back. This number is
automatically reset to zero, whenever loopback operation is
initiated. | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.13.1.1.8 |
| lpbkErrorNoReceives mandatory The number of packets which were transmitted, but not received.
This number is automatically reset to zero, whenever loopback
operation is initiated. | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.13.1.1.9 |