sprotoBootpRelay
CTATX-MIB ·
.1.3.6.1.4.1.97.3.17.1.1.17
Object
column
mandatory
r/w
Enumeration
Specifies whether or not this port is to relay BOOTP packets, as described in RFC-951 and subsequent internet-drafts. Only valid if IP routing is also enabled for this interface.
Context
- MIB
- CTATX-MIB
- OID
.1.3.6.1.4.1.97.3.17.1.1.17- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- sprotoEntry
- Table
- sprotoTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sprotoIfIndex mandatory Identifies the interface (port) to which this entry's
information belongs. The value of this variable
corresponds to ifIndex, as well as most of the other
port identification valu… | column | Integer32 | .1.3.6.1.4.1.97.3.17.1.1.1 |
| sprotoAppleTranslate mandatory Specifies whether, when bridging AppleTalk ELAP, TLAP,
and AARP frames, those frames are to be translated
between token ring and Ethernet format before being
forwarded.
… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.10 |
| sprotoIbmLlcTranslate mandatory Specifies whether, when bridging IBM LLC frames, an
8209-style translation between token ring and Ethernet
format is to be performed before being forwarded.
This op… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.11 |
| sprotoRip mandatory Specifies whether the internet Routing Information
Protocol (RFC-1058) is to be used over this port. Only
valid if sprotoIpRoute is enabled. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.12 |
| sprotoEgp mandatory Specifies whether the internet External Gateway Proto-
col (RFC-904) is to be used over this port. Only valid
if sprotoIpRoute is enabled. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.13 |
| sprotoOspf mandatory Specifies whether the internet Open Shortest Path
First protocol (RFC-1247) is to be used over this port.
Only valid if sprotoIpRoute is enabled. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.14 |
| sprotoArpProxy mandatory Specifies whether the port is to respond to internet
ARP requests for which the unit is the next hop in a
routed path. Only valid if sprotoIpRoute is enabled. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.15 |
| sprotoIbm8209Lsaps mandatory Specifies up to eight LSAPs for which IBM 8209-style
token-ring-to-Ethernet encapsulation is to be performed.
Only valid if sprotoIbmLLcTranslate is enabled.
This o… | column | OctetString | .1.3.6.1.4.1.97.3.17.1.1.16 |
| sprotoNetbiosTranslate mandatory Specifies whether, when bridging Netbios packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is b… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.18 |
| sprotoIpMulticast mandatory Specifies whether the internet Multicast Routing
Protocol (RFC-1075) is to be used over this port. Only
valid if sprotoIpRoute is enabled. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.19 |
| sprotoBridge mandatory Defines the bridging method to be applied to frames
received at, or destined for, this port. Ethernet and
FDDI ports may be configured for transparent, srt, or
none. Token Ring p… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.2 |
| sprotoTrunking mandatory Specifies whether SMC's trunking protocol (an extension
to the standard Spanning Tree) is to be used over this port. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.20 |
| sprotoIpxSrTranslate mandatory Specifies whether, when bridging IPX packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame is bridg… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.22 |
| sprotoAllTranslate mandatory Specifies whether, when bridging any source-routed
explorer frames, the routing information is to be
stripped or propagated. If passRif(1), the frame is bridged
as is, with … | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.23 |
| sprotoSteHopCountAppliedRule mandatory hopcountnotapplied(1), STE hop count rules are not
applied to STE frames. Default for SR ports.
Follows IBM's specifications. hopcountapplied(2),
STE hop count rules a… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.24 |
| sprotoSuppressBpdus mandatory Allows transmission of spanning tree protocol packets
to be suppressed. If normal(1), 802.1d spanning tree
packets and source-routing spanning tree packets are
transmitted as usu… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.3 |
| sprotoIpRoute mandatory Specifies whether or not this port is to be used for
IP routing. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.4 |
| sprotoIpxRoute mandatory Specifies whether or not this port is to be used for
Novell NetWare IPX routing. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.5 |
| sprotoAppleRoute mandatory Specifies whether or not this port is to be used for
AppleTalk (tm) routing. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.6 |
| sprotoArpTranslate mandatory These options are intended to compensate for any like-
ly implementation of internet ARP on 802.5 token ring.
If set to bitswap1(2), then embedded MAC addresses for
ARP packets wi… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.7 |
| sprotoArpSourceRoute mandatory Specifies whether, when bridging TCP/IP ARP packets
which are source-routing explorer frames, the routing
information is to be stripped or propagated. If pass-
Rif(1), the frame i… | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.8 |
| sprotoIpxTranslate mandatory Specifies whether, when bridging Novell IPX frames,
they are to be translated to Ethernet-like frame for-
mat.
This option applies only to token ring ports. | column | Enumeration | .1.3.6.1.4.1.97.3.17.1.1.9 |