swanLinkErrorPercentage
CTATX-MIB ·
.1.3.6.1.4.1.97.3.14.1.1.18
Object
column
mandatory
r/w
Integer32
The percentage of acceptible errors in hundreths of percent.
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swanIndex mandatory The ES/1's port number of the port. | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.1 |
| swanMeshState mandatory | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.10 |
| swanLinkSubnet mandatory | column | OctetString | .1.3.6.1.4.1.97.3.14.1.1.11 |
| swanLinkBridge mandatory | column | OctetString | .1.3.6.1.4.1.97.3.14.1.1.12 |
| swanLinkPort mandatory | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.13 |
| swanNegotiate mandatory | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.14 |
| swanSwitches mandatory Current port selected. | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.15 |
| swanDCEDrops mandatory Number of instances when loss of DCE has been detected. | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.14.1.1.16 |
| swanOutPacketType mandatory The type of out going packet to generate on the HSSI link. | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.17 |
| swanLinkErrorDuration mandatory The time period in hundredths of a second over which the error
percentage should be applied. | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.19 |
| swanDesiredSpeed mandatory | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.2 |
| swanLinkErrorFailPeriods mandatory The maximum number of periods allowed to contain the error
percentage before the link quality is determined to have failed. | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.20 |
| swanLinkErrorMaxPeriods mandatory The maximum number of periods to be used for calculation of link
quality. Default is 10. | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.21 |
| swanLinkRestartTime mandatory The time period in centiseconds which must contain error free
LQR operation before restarting link. | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.22 |
| swanPreserveFCS mandatory Preserve received FCS if true, else regenerate FCS on packet
transmission. | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.23 |
| swanActualSpeed mandatory This is the actual line speed. The possible values are defined
by suartSpeed. For HSSI, the speed is 45-megabits(11). If the
RS-449 interface is being used on the HSSI IOM, the sp… | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.3 |
| swanIpNeighborAddress mandatory Zero, or an IP address to assign to the port's neighbor. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.97.3.14.1.1.4 |
| swanPPPActive mandatory | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.5 |
| swanAlignmentErrors mandatory | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.14.1.1.6 |
| swanOverrunErrors mandatory Number of received packets with data overrun errors, since the
port was last enabled. | column | RFC1155-SMICounter | .1.3.6.1.4.1.97.3.14.1.1.7 |
| swanPortType mandatory | column | Enumeration | .1.3.6.1.4.1.97.3.14.1.1.8 |
| swanLinkCost mandatory | column | Integer32 | .1.3.6.1.4.1.97.3.14.1.1.9 |