swanActualSpeed

CTATX-MIB · .1.3.6.1.4.1.97.3.14.1.1.3
MIB view Table view

Object

column mandatory Enumeration 
This is the actual line speed. The possible values are defined
by suartSpeed. For HSSI, the speed is 45-megabits(11). If the
RS-449 interface is being used on the HSSI IOM, the speed is
always reported as 1.544-megabits(9); however, the external
clock may be generating a slower speed.

Context

MIB
CTATX-MIB
OID
.1.3.6.1.4.1.97.3.14.1.1.3
Type
column
Access
readonly
Status
mandatory
Parent
swanEntry
Table
swanTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
2b1200-baud
3b2400-baud
4b4800-baud
5b9600-baud
6b19200-baud
7b38400-baud
8b56-kilobits
9b1544-kilobits
10b2048-kilobits
11b45-megabits

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swanIndex mandatory
The ES/1's port number of the port.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.1
swanMeshState mandatorycolumnEnumeration.1.3.6.1.4.1.97.3.14.1.1.10
swanLinkSubnet mandatorycolumnOctetString.1.3.6.1.4.1.97.3.14.1.1.11
swanLinkBridge mandatorycolumnOctetString.1.3.6.1.4.1.97.3.14.1.1.12
swanLinkPort mandatorycolumnInteger32.1.3.6.1.4.1.97.3.14.1.1.13
swanNegotiate mandatorycolumnEnumeration.1.3.6.1.4.1.97.3.14.1.1.14
swanSwitches mandatory
Current port selected.
columnEnumeration.1.3.6.1.4.1.97.3.14.1.1.15
swanDCEDrops mandatory
Number of instances when loss of DCE has been detected.
columnRFC1155-SMICounter.1.3.6.1.4.1.97.3.14.1.1.16
swanOutPacketType mandatory
The type of out going packet to generate on the HSSI link.
columnEnumeration.1.3.6.1.4.1.97.3.14.1.1.17
swanLinkErrorPercentage mandatory
The percentage of acceptible errors in hundreths of percent.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.18
swanLinkErrorDuration mandatory
The time period in hundredths of a second over which the error percentage should be applied.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.19
swanDesiredSpeed mandatorycolumnInteger32.1.3.6.1.4.1.97.3.14.1.1.2
swanLinkErrorFailPeriods mandatory
The maximum number of periods allowed to contain the error percentage before the link quality is determined to have failed.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.20
swanLinkErrorMaxPeriods mandatory
The maximum number of periods to be used for calculation of link quality. Default is 10.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.21
swanLinkRestartTime mandatory
The time period in centiseconds which must contain error free LQR operation before restarting link.
columnInteger32.1.3.6.1.4.1.97.3.14.1.1.22
swanPreserveFCS mandatory
Preserve received FCS if true, else regenerate FCS on packet transmission.
columnEnumeration.1.3.6.1.4.1.97.3.14.1.1.23
swanIpNeighborAddress mandatory
Zero, or an IP address to assign to the port's neighbor.
columnRFC1155-SMIIpAddress.1.3.6.1.4.1.97.3.14.1.1.4
swanPPPActive mandatorycolumnEnumeration.1.3.6.1.4.1.97.3.14.1.1.5
swanAlignmentErrors mandatorycolumnRFC1155-SMICounter.1.3.6.1.4.1.97.3.14.1.1.6
swanOverrunErrors mandatory
Number of received packets with data overrun errors, since the port was last enabled.
columnRFC1155-SMICounter.1.3.6.1.4.1.97.3.14.1.1.7
swanPortType mandatorycolumnEnumeration.1.3.6.1.4.1.97.3.14.1.1.8
swanLinkCost mandatorycolumnInteger32.1.3.6.1.4.1.97.3.14.1.1.9