CISCO-CAS-IF-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

180

ccasIfExtVoiceCfgTable

table

.1.3.6.1.4.1.9.9.314.1.1.1 · 1 row entry · 25 columns

Open in standard view

The voice interface extended table defines the
parameters related to the configuration of voice interfaces
(DS0 group of DS1).
          
This table extends the ccasVoiceCfgTable.
          
Each table entry describes an instance of a voice interface
configuration (DS0 group of DS1) in a media gateway.

ccasIfExtVoiceCfgEntry entry .1.3.6.1.4.1.9.9.314.1.1.1.1

Each entry represents a voice interface (DS0 group of
DS1) in a media gateway.

Indexes

No indexes recorded

Column Syntax OID

ccasIfExtVoiceCfgLifNumber

This object specifies the LIF (Logical InterFace) number
associated with this voice interface.

If this object is set to 0, this interface does not have
an associated LIF.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.9.9.314.1.1.1.1.1

ccasIfExtVoiceCfgCcntrlProfile

This object specifies the index of call control profile that
is used by this DS0 group.
If the value of ccasGrpCfgServiceType is 'mgcp(6)',
this is the index of cxeCallCtrlProfileTable.
If the value of ccasGrpCfgServic…

CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZeror/w

Textual Convention: CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZero Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.2

ccasIfExtVoiceCfgVadEnabled

The object specifies VAD (Voice Activity Detection)
is enabled for the compression DSPs of this interface.

The value of this object is 'false' if the voice
interface associated DS0 group uses null signal…

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.314.1.1.1.1.3

ccasIfExtVoiceCfgContinuityTone1

The object specifies the first frequency tone to be
sent between the terminating and the originating gateways
in the continuity test.

HzUnsigned32r/w

Constraints:
range: 1-4000

.1.3.6.1.4.1.9.9.314.1.1.1.1.4

ccasIfExtVoiceCfgContinuityTone2

The object specifies the second frequency tone to be
sent between the terminating and the originating gateways
in the continuity test.

HzUnsigned32r/w

Constraints:
range: 1-4000

.1.3.6.1.4.1.9.9.314.1.1.1.1.5

ccasIfExtVoiceCfgModemPassThru

This object specifies the modem pass-through mode:

(1) passThruDisabled: Modem pass-through is disabled
(2) passThruCisco: Cisco Proprietary PV (Protocol
Violation) modem protoco…

Enumerationr/w

Enumerated Values:

1	passThruDisabled
2	passThruCisco
3	passThruNse
4	passThruNseAal2
5	passThruCa
6	passThruTypeE
7	system
8	passThruNseCa

.1.3.6.1.4.1.9.9.314.1.1.1.1.6

ccasIfExtVoiceCfgUpspeedCodec

This object specifies the CODEC type to use for modem upspeed.
Upspeed is to change the transmission rate of the voice
interface to a higher rate of CODEC type.

CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRater/w

Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate Enumeration

Type Values:

1	other
2	fax2400
3	fax4800
4	fax7200
5	fax9600
6	fax14400
7	fax12000
10	g729r8000
11	g729Ar8000
12	g726r16000
13	g726r24000
14	g726r32000
15	g711ulawr64000
16	g711Alawr64000
17	g728r16000
18	g723r6300
19	g723r5300
20	gsmr13200
21	g729Br8000
22	g729ABr8000
23	g723Ar6300
24	g723Ar5300
25	ietfg729r8000
26	gsmeEr12200
27	clearChannel
28	g726r40000
29	llcc
30	gsmAmrNb
31	g722
32	iLBC
33	iLBCr15200
34	iLBCr13330
35	g722r4800
36	g722r5600
37	g722r6400
38	iSAC
39	aaclc
40	aacld

.1.3.6.1.4.1.9.9.314.1.1.1.1.7

ccasIfExtVoiceCfgT38MaxFaxTxRate deprecated

This object specifies the maximum FAX relay transmission
rate.

CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRater/w

Textual Convention: CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate Enumeration

Type Values:

1	none
2	voiceRate
3	fax2400
4	fax4800
5	fax7200
6	fax9600
7	fax14400
8	fax12000

.1.3.6.1.4.1.9.9.314.1.1.1.1.8

ccasIfExtVoiceCfgT38HsPktPeriod deprecated

This object specifies the period of time for primary high
speed (HS) data packet.

microsecondsCISCO-VOICE-AALX-PROFILE-MIBCiscoCodecPacketPeriodr/w

Textual Convention: CISCO-VOICE-AALX-PROFILE-MIBCiscoCodecPacketPeriod Enumeration

Type Values:

1	pktPeriod5000us
2	pktPeriod5500us
3	pktPeriod5785us
4	pktPeriod10000us
5	pktPeriod15000us
6	pktPeriod20000us
7	pktPeriod25000us
8	pktPeriod30000us
9	pktPeriod35000us
10	pktPeriod40000us
11	pktPeriod45000us
12	pktPeriod50000us
13	pktPeriod55000us
14	pktPeriod60000us
15	pktPeriod65000us
16	pktPeriod70000us
17	pktPeriod75000us
18	pktPeriod80000us
19	pktPeriod85000us
20	pktPeriod90000us

.1.3.6.1.4.1.9.9.314.1.1.1.1.9

ccasIfExtVoiceCfgT38HsRedundancy deprecated

The object specifies the number of redundant FAX packets
for Internet FAX protocol (IFP) packet transmission.
The value of '0' indicates that no redundant Internet
FAX packets will be transmitted during the T.38 FAX …

FAX packetsUnsigned32r/w

Constraints:
range: 0-2

.1.3.6.1.4.1.9.9.314.1.1.1.1.10

ccasIfExtVoiceCfgRepetition

This object is used to repeatedly apply the writable objects
of ccasIfExtVoiceCfgTable specified in the same SNMP PDU
starting from the row specifies by the index of the instance
for the number of rows specified in thi…

CISCO-TCConfigIteratorr/w

Textual Convention: CISCO-TCConfigIterator Unsigned32

Type Constraints:
range: 1..4294967295

.1.3.6.1.4.1.9.9.314.1.1.1.1.11

ccasIfExtVoiceCfgBulkCfgOwner

This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.

The value of this object is set by the SNMP manager
with its own identifier at the same time as issuing th…

RMON-MIBOwnerStringr/w

Textual Convention: RMON-MIBOwnerString OctetString

Type Constraints:
range: 0..127

.1.3.6.1.4.1.9.9.314.1.1.1.1.12

ccasIfExtVoiceCfgBulkCfgResult

This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.

This object indicates the result of the bulk configuration
initiated by the SNMP manager specified in the …

CISCO-TCBulkConfigResult

Textual Convention: CISCO-TCBulkConfigResult OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.9.9.314.1.1.1.1.13

ccasIfExtVoiceCfgVadTimer

This object specifies the hangover time for VAD.

Once the voice inactivity is detected, gateway will wait
for this duration before activating silence suppression.

millisecondsInteger32r/w

Constraints:
range: 250-65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.14

ccasIfExtVoiceCfgICSEnable

This object specifies whether the Idle Channel suppression
(ICS) is enabled for an AAL2 connection.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.9.9.314.1.1.1.1.15

ccasIfExtVoiceCfgICSIntTimer

This object specifies a timeout value for ICS integration
timer. This timer is started once channel idle is detected.
When the timer is expired, the gateway will stop transmitting
bearer data to network. Instead, the CA…

millisecondsInteger32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.16

ccasIfExtVoiceCfgTonePlan

This object specifies which tone plan the DS0 group is
using for playing the tones.

CISCO-MEDIA-GATEWAY-MIBCVoiceTonePlanIndexOrZeror/w

Textual Convention: CISCO-MEDIA-GATEWAY-MIBCVoiceTonePlanIndexOrZero Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.17

ccasIfExtVoiceCfgGwyLinkId

This object specifies the H.248 media gateway link
that this DS0 group belongs to.
This object is applicable only if the value of
ccasGrpCfgServiceType is 'h248(9)'.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.9.9.314.1.1.1.1.18

ccasIfExtVoiceCfgH248PkgIds

This object specifies the H.248 packages supported in
this DS0 group.
This object is applicable only if the value of
ccasGrpCfgServiceType is 'h248(9)'.

CISCO-MEGACO-EXT-MIBCH248Packagesr/w

Textual Convention: CISCO-MEGACO-EXT-MIBCH248Packages Bits

Type Values:

0	pkgG
1	pkgRoot
2	pkgToneGen
3	pkgToneDet
4	pkgDG
5	pkgDD
6	pkgCG
7	pkgCD
8	pkgCT
9	pkgNT
10	pkgRTP
11	pkgTDMC
12	pkgAN
13	pkgBCG
14	pkgXCG
15	pkgSrvTn
16	pkgXsrvTn
17	pkgChp
18	pkgIT
19	pkgLLTR
20	pkgBCAS
21	pkgRBS
22	pkgOSES
23	pkgAMET
24	pkgBCASAddr
25	pkgCASBlock
26	pkgGRI
27	rtcpxr
28	xrbm
29	qac
30	pkgDS
31	pkgETerm
32	pkgXnq
33	pkgCTYP
34	pkgIPFAX

.1.3.6.1.4.1.9.9.314.1.1.1.1.19

ccasIfExtVoiceCfgEventMappingIdx

This object specifies the action of the voice band data
signal events handling in this DS0 group.
The real-time detected voice band data events are categorized
by VoiceBandDataEventType defined in
CISCO-VOICEBAND-DAT…

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.20

ccasIfExtVoiceCfgGatewayIndex

This object specifies the media gateway index that
this DS0 group belong to.
The value of this object is cmgwIndex in cMediaGwTable.

Unsigned32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.9.9.314.1.1.1.1.21

ccasIfExtVoiceCfgCasProfile

This object specifies the index of CAS profile that
is used by this DS0 group. The value of this object
is ccasProfileIndex in ccasIfExtProfileTable.
This object is applicable only when the DS0 group is
in a DS1 line wh…

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.22

ccasIfExtVoiceCfgCasVariant

This object specifies the index of CAS variant that
is used by this DS0 group. The value of this object
is the same as the value of ccasVariantIndex in
ccasIfExtVariantTable.

This object is applicable o…

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.1.1.1.23

ccasIfExtVoiceCfgDs0ChannelsFail

This object contains the bit map of the failure DS0
channels in the DS0 group.
The MSB (most significant bit) is DS0 channel number 1.
For T1, only higher 24 bits are used to specify the
the CAS channels for the CAS gr…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.9.9.314.1.1.1.1.24

ccasIfExtVoiceCfgNoiseRegType

This object specifies the type of comfort noise generation:

(1) none: No comfort noise generation
(2) simple: Cisco Proprietary comfort noise generation
(3) g711A2: ITU G.711 Appendix II compliant
…

Enumerationr/w

Enumerated Values:

1	none
2	simple
3	g711A2

.1.3.6.1.4.1.9.9.314.1.1.1.1.25

ccasIfExtDs0GrpCfgTable

table

.1.3.6.1.4.1.9.9.314.1.1.3 · 1 row entry · 3 columns

Open in standard view

The voice interface extended table defines the
parameters related to the configuration of voice interfaces
(DS0 group of DS1).
          
This table extends the ccasVoiceCfgTable.
          
Each table entry describes an instance of a voice interface
configuration (DS0 group of DS1) in a media gateway.

ccasIfExtDs0GrpCfgEntry entry .1.3.6.1.4.1.9.9.314.1.1.3.1

Each entry represents a DS0 group interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasIfExtDs0GrpRepetition This object is used to repeatedly apply the writable objects of ccasIfExtDs0GrpCfgTable specified in the same SNMP PDU starting from the row specifies by the index of the instance for the number of rows specified in thi…	CISCO-TCConfigIteratorr/w Textual Convention: CISCO-TCConfigIterator `Unsigned32` Type Constraints: `range: 1..4294967295`	`.1.3.6.1.4.1.9.9.314.1.1.3.1.1`
ccasIfExtDs0GrpRepeatOwner This object is used for error checking of the operation specified in ccasIfExtDs0GrpRepetition. The value of this object is set by the SNMP manager with its own identifier at the same time as issuing the …	RMON-MIBOwnerStringr/w Textual Convention: RMON-MIBOwnerString `OctetString` Type Constraints: `range: 0..127`	`.1.3.6.1.4.1.9.9.314.1.1.3.1.2`
ccasIfExtDs0GrpRepeatResult This object is used for error checking of the operation specified in ccasIfExtDs0GrpRepetition. This object indicates the result of the repetition initiated by the SNMP manager specified in the value of c…	CISCO-TCBulkConfigResult Textual Convention: CISCO-TCBulkConfigResult `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.9.9.314.1.1.3.1.3`

ccasIfExtProfileTable

table

.1.3.6.1.4.1.9.9.314.1.2.1 · 1 row entry · 6 columns

Open in standard view

This table specifies a list of CAS profiles. Each CAS profile
consists of the configurable CAS attributes related to: 
. Line signal timers table, ccasIfExtLineSignalTimerTable.
. Register signals table, ccasIfExtRegisterSignalTable.
. Register signal timers table, ccasIfExtRegSignalTimerTable.
. General configurations table, ccasIfExtGeneralConfigTable.
          
A CAS profile can be applied to a DS0 group of the DS1 line
with CAS signaling. A DS1 line is configured for CAS signaling
when its dsx1SignalMode is set to 'robbedBit(2)' for T1 or 
'bitOriented(3)' for E1.

ccasIfExtProfileEntry entry .1.3.6.1.4.1.9.9.314.1.2.1.1

Each entry represents a CAS profile in media gateway.

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasProfileIndex

Column Syntax OID

ccasProfileIndex

This object uniquely identifies the CAS profile.
The value of 1 specifies the default CAS profile in the
media gateway.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.1.1.1

ccasProfileLineSigTimer

This object specifies the attributes of CAS line
signaling timers indicated by ccasLSTIndex in
ccasIfExtLineSignalTimerTable.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.1.1.2

ccasProfileRegisterSignal

This object specifies the attributes of CAS register
signals indicated by ccasRSIndex in
ccasIfExtRegisterSignalTable.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.1.1.3

ccasProfileRegSigTimer

This object specifies the attributes of CAS register
signaling timers indicated by ccasRSTIndex in
ccasIfExtRegSignalTimerTable.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.1.1.4

ccasProfileGeneralCfg

This object specifies the general CAS attributes indicated
by ccasGCnfIndex in ccasIfExtGeneralConfigTable.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.1.1.5

ccasProfileRowStatus

When the entry is created, all the associated entries
indexed by the following objects must be existing:
ccasProfileLineSigTimer,
ccasProfileRegisterSignal,
ccasProfileRegSigTimer,
ccasProfileGeneralCfg…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.2.1.1.6

ccasIfExtVariantTable

table

.1.3.6.1.4.1.9.9.314.1.2.2 · 1 row entry · 6 columns

Open in standard view

This table specifies a list of CAS signaling protocols such as
R2 CAS, Feature Group D Oprerator Services ( FGD OS). 
Each CAS variant is downloaded to and parsed by 
the media gateway.
A CAS variant can be applied to a DS0 group of the DS1
line with CAS signaling. A DS1 line is configured for CAS 
signaling when its dsx1SignalMode is set to 'robbedBit(2)' 
for T1 or 'bitOriented(3)' for E1.

ccasIfExtVariantEntry entry .1.3.6.1.4.1.9.9.314.1.2.2.1

Each entry represents a CAS variant in media gateway.

Upon the creation of the entry, the CAS variant
specified by ccasVariantFile will be downloaded to
the media gateway. After the file is successfully pa…

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasVariantIndex

Column Syntax OID

ccasVariantIndex

An arbitrary value which uniquely identifies the CAS variant
in the media gateway.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.2.2.1.1

ccasVariantFile

This object specifies the valid file name with extension
'.o' stored on the media gateway's hard disk.
The CAS variant file can be transferred to the media
gateway via FTP text file transfer mechanism.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.9.9.314.1.2.2.1.2

ccasVariantSource

This object specifies the source from where the CAS
variant file must be fetched.
. internal: Value indicates that the file is built
into the firmware.
. external: Value indicates that the file is to be
downloa…

Enumerationr/w

Enumerated Values:

1	internal
2	external

.1.3.6.1.4.1.9.9.314.1.2.2.1.3

ccasVariantNumberCount

This object indicates the number of DS0 groups of the DS1
line which are used for the CAS variant.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.9.9.314.1.2.2.1.4

ccasVariantState

This object indicates the configuration status of the
CAS variant.
. initInProgress: The state machine is being initialized.
. initSuccessfully: The state machine was initialized properly.
. initFailed: The intializat…

Enumeration

Enumerated Values:

1	initInProgress
2	initSuccessfully
3	initFailed

.1.3.6.1.4.1.9.9.314.1.2.2.1.5

ccasVariantRowStatus

When the entry is created, the ccasVariantFile object is
mandatory.
The entry can be added or deleted, but not modified by
the manager.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.2.2.1.6

ccasIfExtIncomingLineSignalTable

table

.1.3.6.1.4.1.9.9.314.1.3.1 · 1 row entry · 9 columns

Open in standard view

This table defines the parameters related to the incoming 
line signals for CAS variant. 
The appropriate signal definitions from this table will 
be downloaded to the media gateway. The media gateway will 
use the information provided in this table to match the 
incoming bit pattern to a particular signal.

ccasIfExtIncomingLineSignalEntry entry .1.3.6.1.4.1.9.9.314.1.3.1.1

Each entry represents an incoming line signal definition
for the CAS variant corresponding to the CAS Variant index.
Entries in this table are implicitly created when a CAS
variant file is parsed when an entry is crea…

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasVariantIndex ccasILSSignalNameIndex

Column	Syntax	OID
ccasILSSignalNameIndex This object specifies the Signal Name index for the various CAS line signals. This object along with the cmgwIndex and ccasVariantIndex identify an unique entry in this table.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.2`
ccasILSSignalName This object indicates CAS signal name corresponding to the ccasILSSignalNameIndex. The media gateway uses ccasILSRxPattern along with following objects: ccasILSMatchedRxPattern ccasILSMatchedTxPattern ccasILSMinMakeT…	OctetString Constraints: `range: 1-64`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.3`
ccasILSRxPattern This object indicates the ABCD bit pattern of the signal being received on the DS0.	CASLineSignal Textual Convention: CASLineSignal `OctetString` Type Constraints: `range: 1`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.4`
ccasILSMatchedRxPattern This object indicates the previous matched ABCD bit pattern that was received on the DS0.	CASLineSignal Textual Convention: CASLineSignal `OctetString` Type Constraints: `range: 1`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.5`
ccasILSMatchedTxPattern This object indicates the current ABCD bit pattern being transmitted on the DS0.	CASLineSignal Textual Convention: CASLineSignal `OctetString` Type Constraints: `range: 1`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.6`
ccasILSMinMakeTime This object specifies the minimum time for which the received pattern (ccasILSRxPattern) must persist to be considered a valid state change or transition. If the state change lasts for less than this time, it does not…	millisecondsUnsigned32r/w Constraints: `range: 2-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.7`
ccasILSMaxMakeTime This object specifies the maximum time for which the Rx pattern (ccasILSRxPattern) must persist to be considered a valid state change or transition. The value of 0 indicates there is no maximum make time for this sig…	millisecondsUnsigned32r/w Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.8`
ccasILSMinBreakTime This object specifies the minimum time for which the ABCD bit pattern being received on the line, and should go back to its original signal pattern after the make pattern has been asserted. The value of 0 indicates …	millisecondsUnsigned32r/w Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.9`
ccasILSMaxBreakTime This object specifies the maximum time for which the ABCD bit pattern being received on the line, and go back to its original signal pattern after the make pattern has been asserted. The value of 0 indicates there i…	millisecondsUnsigned32r/w Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.1.1.10`

ccasIfExtOutgoingLineSignalTable

table

.1.3.6.1.4.1.9.9.314.1.3.2 · 1 row entry · 5 columns

Open in standard view

This table defines the parameters related to for the 
outgoing line signals pertaining to that CAS variant.

ccasIfExtOutgoingLineSignalEntry entry .1.3.6.1.4.1.9.9.314.1.3.2.1

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasVariantIndex ccasOLSSignalNameIndex

Column	Syntax	OID
ccasOLSSignalNameIndex This object specifies the Signal Name index for the various CAS Line signals. This object along with the ccasVariantIndex identify a unique entry in this table.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.9.9.314.1.3.2.1.1`
ccasOLSCasSignalName This object indicates outgoing CAS signal name.	OctetString Constraints: `range: 1-64`	`.1.3.6.1.4.1.9.9.314.1.3.2.1.2`
ccasOLSTxPattern This object indicates the ABCD transmit bit pattern.	CASLineSignal Textual Convention: CASLineSignal `OctetString` Type Constraints: `range: 1`	`.1.3.6.1.4.1.9.9.314.1.3.2.1.3`
ccasOLSMakeTime This object specifies the time value for which the Tx Pattern being transmitted.	millisecondsUnsigned32r/w Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.2.1.4`
ccasOLSBreakTime This object specifies the time value for which the pattern being transmitted will switch to the original pattern before the Tx pattern was asserted on the line. The value of 0 indicates there is no break time for this…	millisecondsUnsigned32r/w Constraints: `range: 0-4294967295`	`.1.3.6.1.4.1.9.9.314.1.3.2.1.5`

ccasIfExtLineSignalTimerTable

table

.1.3.6.1.4.1.9.9.314.1.3.3 · 1 row entry · 12 columns

Open in standard view

This table defines all timers related to the CAS Line 
signals.

ccasIfExtLineSignalTimerEntry entry .1.3.6.1.4.1.9.9.314.1.3.3.1

Each entry represents a CAS Line Signal Timer in media
gateway.

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasLSTIndex

Column Syntax OID

ccasLSTIndex

An arbitrary index that uniquely identifies a
entry in the ccasIfExtLineSignalTimerTable.
The index 1 is reserved for the default entry.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.3.3.1.1

ccasLSTIdleGuardTimer

This object specifies the maximum amount of time MG will
wait for receipt of the idle signal on the line.
For T1 interfaces idle signal corresponds to on-hook
pattern on line.
For E1 interfaces idle signal corresponds …

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.2

ccasLSTClearFwdTimer

This object specifies the value of the timer that the GW
will start at the request of the controlling application
such as MGC for receipt of the clear forward signal on the
line.
This object is applied to R2 CAS.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.3

ccasLSTClearBwdTimer

This object specifies the value of the timer that the GW
will start at the request of the controlling application
such as MGC for receipt of the clear backward signal.
This object is applied to R2 CAS.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.4

ccasLSTReleaseGuardTimer

This object specifies the delay between reception of the
clear forward signal and the sending of the idle signal.
Upon reception of the clear forward signal, GW starts the
release guard timer. Upon expiry of this ti…

milllisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.5

ccasLSTCASGlareTimer

This object specifies the maximum amount of time MG will
wait for other end to back out when glare occurs on a DS0
line.
Change in incoming off-hook signal to on-hook signal
with-in this time frame indicates that o…

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.6

ccasLSTAnswerMeterDelayTimer

The object specifies the delay between generation of the
answer signal and the generation of the meter signal.
The GW will start this timer after having sent the line
answer signal.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.7

ccasLSTCASDebounceTimer

This object specifies the amount of time for which the line
signal should persist to be valid.
The value of ccasLSTCASDebounceTimer must be less than or
equal the value of following objects:
ccasILSMinMakeTime, …

millisecondsUnsigned32r/w

Constraints:
range: 1-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.8

ccasLSTSeizeAckRspTimer

This object specifies the maximum amount of time MG will
wait for reception of seize ack signal.
Seize Ack signal is expected in response of seize signal.
This object is applied for both R2 CAS and non R2 CAS.

millisecondsUnsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.9.9.314.1.3.3.1.9

ccasLSTDelayBetRegAnsAndLineAns

This object specifies the timer that will be started
after register signaling completes successfully,
within which the answer line signal should be
received.
This applies to outgoing R2 registers.
The value of 0 ind…

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.3.3.1.10

ccasLSTSeizeAckToDigitTimer

This object specifies the amount of time that the GW
should wait for the reception address digits after
sending seize ack signal.
The value of 0 indicates the timer will not be started
and MG would wait forever.

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.3.3.1.11

ccasLSTRowStatus

This object is used for adding, deleting, and modifying
the entries from the ccasIfExtLineSignalTimerTable.
A default entry with index value 1 is created at
initialization, and it cannot be modified or deleted.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.3.3.1.12

ccasIfExtRegisterSignalTable

table

.1.3.6.1.4.1.9.9.314.1.4.1 · 1 row entry · 67 columns

Open in standard view

This table defines the signal to action definitions for the 
Register signals for R2 variant.

ccasIfExtRegisterSignalEntry entry .1.3.6.1.4.1.9.9.314.1.4.1.1

Entries are configured per country.
When DS0 groups are associated with a CAS profile, it is
also associated with one of these entries if the CAS variant
is an R2 variant.
Entries are explicitly created modified an…

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasRSIndex

Column Syntax OID

ccasRSIndex

This is an arbitrary index that uniquely identifies an
entry in this table. This parameter is mandatory when
creating an entry.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.4.1.1.1

ccasRSCountry

This object specifies the country where the meaning for
the signal definition/action applies.
This parameter is mandatory when creating an entry.
When the R2 country (ITU or other) is specified, the default
values fo…

CASCountryCoder/w

Textual Convention: CASCountryCode Enumeration

Type Values:

1	itu
2	argentina
3	australia
4	bolivia
5	brazil
6	bulgaria
7	china
8	colombia
9	costaRica
10	croatia
11	eastEurope
12	ecuadorIT
13	ecuadorLME
14	greece
15	guatemala
16	hongKong
17	india
18	indonesia
19	israel
20	korea
21	laos
22	malaysia
23	malta
24	mongolia
25	newZealand
26	paraguay
27	peru
28	philippines
29	saudiArabia
30	singapore
31	southAfrica
32	telemex
33	telnor
34	thailand
35	uruguay
36	venezuela
37	vietnam
38	bemilcom

.1.3.6.1.4.1.9.9.314.1.4.1.1.2

ccasRSSubRegion

This object is used to describe a variation within a
particular country.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.9.9.314.1.4.1.1.3

ccasBwdRSNextDigitANI

This object specifies a backward signal requesting
transmission of the next ANI digit (n + 1) after
reception of digit n.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.4

ccasBwdRSNextDigitDNIS

This object specifies a backward signal requesting
transmission of the next DNIS digit (n + 1) after
reception of digit n.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.5

ccasBwdRSPrevDigit

This object specifies a backward signal requesting
transmission of the previous ANI or DNIS digit (n - 1)
after reception of digit n.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.6

ccasBwdRSXtoGroupBSignals

This object specifies a backward signal indicating that the
incoming R2 register at the incoming end needs no additional
address digit and is about to go over to transmission of a
Group B signal conveying information…

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.7

ccasBwdRSCongestion

This object specifies a backward signal indicating that:
. Congestion of national links.
. Congestion in selection stages of terminal international
or national exchanges.
. Occurrence of time-out or abnormal release …

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.8

ccasBwdRSCallingPartyCategory

This object specifies a backward signal requesting for a
calling party category information or a Group II signal.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.9

ccasBwdRSAddrCompleteGroupA

This object specifies a backward signal indicating that the
R2 register at the incoming end needs no additional digit,
but will not send Group B signals.
The call has to be charged on answer.
The default value is co…

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.10

ccasBwdRSPrevNminus2Digit

This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 2) after reception
of digit n.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.11

ccasBwdRSPrevNminus3Digit

This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 3) after reception
of digit n.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.12

ccasBwdRSCountryCode

This object specifies a backward signal requesting the
country code indicator.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.13

ccasBwdRSLangDiscr

This object specifies a backward signal requesting the
language digit or the discriminating digit.
. Operator assistance: requesting a language digit.
. Automatic call: requesting a discriminating digit.
The default…

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.14

ccasBwdRSNatureOfCircuit

This object specifies a backward signal requesting
information regarding the nature of the circuits involved
in the connection so far, i.e. satellite link or not.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.15

ccasBwdRSInfoEchoSuppressor

This object specifies a backward signal requesting
information regarding the nature of echo suppressor being
used in the connection.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.16

ccasBwdRSInternationalCongst

This object specifies a backward signal indicating:
. Congestion on international links.
. Congestion in selection stages at an international
transit exchange or at a terminal international exchange
and/or its out…

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.17

ccasBwdRSXtoGroupC

This object specifies a backward signal requesting switch
to reception of group C signals.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.18

ccasBwdRSRepeatLastDigit

This object specifies a backward signal requesting
resending of the last digit just sent out.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.19

ccasBwdRSRepeatCalledDigit

This object specifies a backward signal requesting for
out pulsing of the called digits or DNIS from beginning.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.20

ccasBwdRSPlaySITTone

This object specifies a backward signal indicating that
SIT tone should be played towards the calling party.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.21

ccasBwdRSSubscriberLineBusy

This object specifies a backward signal indicating that
the line or lines connecting the called subscriber to
the exchange are busy or engaged.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.22

ccasBwdRSNetworkCongstInGroupB

This object specifies a backward signal indicating that
congestion condition has occured after the changeover
to Group B signals.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.23

ccasBwdRSInvalidDialedNumber

This object specifies a backward signal indicating that the
dialed or called number is invalid or not in use (e.g. an
unused country code, an unused trunk code or subscriber
number that has not been allocated).
The …

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.24

ccasBwdRSSubLineFreeWithCharge

This object specifies a backward signal indicating that
the called party's line is free and that the call has to
be charged on answer.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.25

ccasBwdRSSubLineFreeWithNoCharge

This object specifies a backward signal indicating that
the called party line is free but is not to be charged
on answer.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.26

ccasBwdRSSubLineOutOfOrder

This object specifies a backward signal indicating that the
called party line is out of service or faulty.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.27

ccasBwdRSAnnouncement

This object specifies a backward signal indicating that an
announcement follows this indication.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.28

ccasBwdRSXtoGrpASendNextDNIS

This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the next
DNIS digit.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.29

ccasBwdRSXtoGrpASendDNISFrmBeg

This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the DNIS
digits from the beginning.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.30

ccasBwdRSXtoGrpAResendLastDNIS

This object specifies a backward signal requesting the other
exchange to switch to reception of group A and resend the last
DNIS digit sent out.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.31

ccasBwdRSSSendCatSwGrpB

This object specifies a backward signal requesting the end
receiving this signal to send the subscriber category
information and switch to grp B from group C.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.32

ccasBwdRSSGrpCCong

This object specifies a backward signal indicating that
congestion occurred in the network when in group C signaling
state.
The default value is country specific.

CASBackwardSignalr/w

Textual Convention: CASBackwardSignal Enumeration

Type Values:

1	notApplicable
2	a1
3	a2
4	a3
5	a4
6	a5
7	a6
8	a7
9	a8
10	a9
11	a10
12	a11
13	a12
14	a13
15	a14
16	a15
17	b1
18	b2
19	b3
20	b4
21	b5
22	b6
23	b7
24	b8
25	b9
26	b10
27	b11
28	b12
29	b13
30	b14
31	b15
32	c1
33	c2
34	c3
35	c4
36	c5
37	c6
38	c7
39	c8
40	c9
41	c10
42	c11
43	c12
44	c13
45	c14
46	c15

.1.3.6.1.4.1.9.9.314.1.4.1.1.33

ccasFwdRSANIDigitAvailable

This object specifies a forward signal indicating that ANI
digits are available.
This is used in country variants like India to indicate
that the ANI digits are available when the backward signal
requesting for ANI d…

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.34

ccasFwdRSANIDigitNotAvailable

This object specifies a forward signal indicating that
there are no ANI digits available for out pulsing.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.35

ccasFwdRSEndANICallingPartyNotRev

This object specifies a forward signal indicating
that there are no more ANI digits to out pulse and the
calling party can not be revealed to the called party.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.36

ccasFwdRSEndANICallingPartyRev

This object specifies a forward signal indicating that
there are no more ANI digits to out pulse and the calling
party can be revealed to the called party.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.37

ccasFwdRSEndOfDNISDigit

This object specifies a forward signal indicating the end
of DNIS digits.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.38

ccasFwdRSNoCategoryAvailble

This object specifies a forward signal indicating that
there is no calling party category (information) available
to be sent out.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.39

ccasFwdRSCCEchoSuppressor

This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call requires echo suppressors.
The default value …

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.40

ccasFwdRSCCNoEchoSuppressor

This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call may not require any echo suppressor.
The defau…

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.41

ccasFwdRSCCInsertEchoSuppressor

This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The outgoing half echo suppressor has to be inserted.
…

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.42

ccasFwdRSIncHalfEchoRequired

This object specifies a forward signal indicating that:
. The outgoing half echo suppressor has been inserted.
. The incoming half echo suppressor is required.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.43

ccasFwdRSTestCall

This object specifies a forward signal. When it is used
as the first forward signal and indicates that the call
is being originated by test equipment.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.44

ccasFwdRSSatelLinkIncluded

This object specifies a forward signal indicating that
a satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature of circuit.
The default value is country…

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.45

ccasFwdRSSatelLinkNotIncluded

This object specifies a forward signal indicating that
no satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature of circuit.
The default value is countr…

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.46

ccasFwdRSDiscriminatorDigit

This object specifies a forward signal indicating the
digit that separates or distinguishes different information
blocks in the forward signals being generated or received.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.47

ccasFwdRSOtherLanguage

This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.48

ccasFwdRSOtherLanguage1

This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.49

ccasFwdRSOtherLanguage2

This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.50

ccasFwdRSRequestNotAccepted

This object specifies a forward signal indicating that the
receiving backward signal could not be processed or defined.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.51

ccasFwdRSSubWithoutPriorNational

This object specifies a forward signal indicating that the
call is set up from a subscriber's line and is non-priority.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.52

ccasFwdRSSubPriorNational

This object specifies a forward signal indicating that the
call is set up from a subscriber's line to which priority
treatment of calls has been accorded. This signal is specified
to national trunks only.
The default …

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.53

ccasFwdRSSubPriorInternational

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.54

ccasFwdRSMaintenanceEquipment

This object specifies a forward signal indicating that
the call comes from maintenance equipment.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.55

ccasFwdRSOperatorCall

This object specifies a forward signal indicating that
the call is setup from an operator.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.56

ccasFwdRSDataTransNational

This object specifies a forward signal indicating that
the call is being used for national data transmission.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.57

ccasFwdRSDataTransInternational

This object specifies a forward signal indicating that
the call is being used for international data transmission.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.58

ccasFwdRSOperNoFwdTransFacility

This object specifies a forward signal indicating the call
is being set up from a subscriber's line, operator's
position or from maintenance equipment and no forward
transfer signal will be used.
The default value is …

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.59

ccasFwdRSOperFwdTransFacility

This object specifies a forward signal indicating the call
is set up from an operator's position with possibility of
recourse to the forward transfer facility.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.60

ccasFwdRSSubsrcWithMeter

This object specifies a forward signal indicating the
subscribers have a meter.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.61

ccasFwdRSSubsrcWithIDD

This object specifies a forward signal indicating the
subscribers have an International Direct Dial facility.
The default value is country specific.

CASForwardSignalr/w

Textual Convention: CASForwardSignal Enumeration

Type Values:

1	notApplicable
2	i1
3	i2
4	i3
5	i4
6	i5
7	i6
8	i7
9	i8
10	i9
11	i10
12	i11
13	i12
14	i13
15	i14
16	i15
17	ii1
18	ii2
19	ii3
20	ii4
21	ii5
22	ii6
23	ii7
24	ii8
25	ii9
26	ii10
27	ii11
28	ii12
29	ii13
30	ii14
31	ii15
32	iiI1
33	iiI2
34	iii3
35	iii4
36	iii5
37	iii6
38	iii7
39	iii8
40	iii9
41	iii10
42	iii11
43	iii12
44	iii13
45	iii14
46	iii15

.1.3.6.1.4.1.9.9.314.1.4.1.1.62

ccasRSInterpreFirstANIDigit

This object is used to interpret the meaning of the first
ANI digit for both receiving and transmitting when sent
and received.
.firstANIDigit: First ANI digit.
.aniAvailableOrNot: Indication as to whether ANI is ava…

Enumerationr/w

Enumerated Values:

1	firstANIDigit
2	aniAvailableOrNot
3	subscriberCategory

.1.3.6.1.4.1.9.9.314.1.4.1.1.63

ccasRSGetValueFromValidIndex

This object specifies the entry index from which values
for the objects not specified in the set operation will
be copied over from.
If both the country index and this object are specified,
this object takes precede…

Unsigned32r/w

Constraints:
range: 1-400

.1.3.6.1.4.1.9.9.314.1.4.1.1.64

ccasRSSeqInfCollect

This object determines the sequence in which information
will be gathered by the incoming register.

Only a set of predefined characters can be used in the
octet string notation of the sequence. The specia…

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.9.9.314.1.4.1.1.65

ccasRSSendFirstFwdSig

This object specifies the information element that will
take precedence when being sent out as the first forward
register signal for an outgoing call. This can be either
the first DNIS digit, indication that country …

Enumerationr/w

Enumerated Values:

1	dnisCCLangDisc
2	dnisLangDiscCC
3	cCLangDiscDnis
4	cCDnisLangDisc
5	langDiscCCDnis
6	langDiscDnisCC

.1.3.6.1.4.1.9.9.314.1.4.1.1.66

ccasRSRowStatus

This object is used for adding, modifying, and deleting
the entries from the ccasRegisterSignalTable.
A default entry with index value 1 is created at
initialization, and it cannot be modified or deleted.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.4.1.1.67

ccasIfExtRegSignalTimerTable

table

.1.3.6.1.4.1.9.9.314.1.5.2 · 1 row entry · 13 columns

Open in standard view

This table defines the timers related to the CAS register 
signals.

ccasIfExtRegSignalTimerEntry entry .1.3.6.1.4.1.9.9.314.1.5.2.1

Each entry represents a CAS Register Signal Timer in media
gateway.

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasRSTIndex

Column Syntax OID

ccasRSTIndex

An arbitrary index that uniquely identifies a
entry in the ccasIfExtRegSignalTimerTable.
The index of 1 is reserved for the default entry.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.1

ccasRSTAnswerSigTimer

This object specifies the timer that is started
after having sent out the last forward digit within
which the backward register answer signal should be
received.

Normally it would be same as the compelled…

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.2

ccasRSTCompelledFwdToneOnTimer

This object specifies the period for which the forward
digit tone stays on, waiting for a reception of the
backward signal in compelled signaling.
This timer is started after the forward signal digit is
turned on.

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.3

ccasRSTCompelledFwdToneOffTimer

This object specifies the period for which the forward
signal digit is turned off in compelled signaling.
This timer is started after the backward signal is
received and after the forward signal digit is turned
off …

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.4

ccasRSTCompelledBwdToneOnTimer

This object specifies the period for which the backward
signal stays on waiting for the forward digit signal to
go off in compelled signaling.
This timer is started after the backward signal is sent
in response to …

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.5

ccasRSTOutFwdPulseOnTimer

This object specifies the timer is started after the
forward digit tone is sent out. Tone is turned off
after the timer expires.
This object applies to outgoing R2 registers where the
forward signals are sent as puls…

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.6

ccasRSTOutFwdPulseOffTimer

This object specifies the interval between two forward
pulse tones.
This object applies to outgoing R2 registers where the
forward signals are sent as pulses for non-compelled
signaling.

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.7

ccasRSTIncFwdPulseOnTimer

This object specifies the period for which the forward
digit pulse can be on. The timer is started after the
forward digit signal is received, and stays on until
the forward digit being received is turned off.
Th…

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.8

ccasRSTBwdPulseOnTimer

This value specifies the period for which the backward
pulse is on before it is turned off.
This object applies to incoming R2 registers where the
forward signals are received either continuously or as
a pulse bu…

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.9

ccasRSTIncomingRegSigDuration

This object specifies the duration within which the register
signaling should complete for an incoming call.
This timer is started as soon as the first forward register
signal is received.

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.10

ccasRSTOutgoingRegSigDuration

This object specifies the duration within which the register
signaling should complete for an outgoing call.
This timer is started when the first forward register signal
is sent out.

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.11

ccasRSTCalledPartyInterDigTimer

This object specifies the interdigit timer for the
collection of called party number (DNIS) for R2 signaling
when there is no digit map associated with the digits
being gathered.
This timer is started after receiving ea…

secondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.5.2.1.12

ccasRSTRowStatus

This object is used for adding, deleting and modifying
the entries from the ccasIfExtRegSignalTimerTable.
A default entry with index value 1 is created at
initialization, and it can not be modified or deleted.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.5.2.1.13

ccasIfExtGeneralConfigTable

table

.1.3.6.1.4.1.9.9.314.1.6.1 · 1 row entry · 34 columns

Open in standard view

This table defines the general parameters related to 
CAS variant.

ccasIfExtGeneralConfigEntry entry .1.3.6.1.4.1.9.9.314.1.6.1.1

An entry represents a general attribute for CAS variant
in media gateway.

Indexes

CISCO-MEDIA-GATEWAY-MIBcmgwIndex ccasGCnfIndex

Column Syntax OID

ccasGCnfIndex

An arbitrary index that uniquely identifies a
entry in the ccasIfExtGeneralConfigTable.
The index of 1 is reserved for the default entry.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.9.9.314.1.6.1.1.1

ccasGCnfGlarePolicy

This object specifies a glare policy. It is used only if
CAS DS0 directionality of the endpoint is bidirectional,
and is applicable for non R2 variants.
. rptSzOnGlareTmrExp (1): When glare is detected, the GW
will…

Enumerationr/w

Enumerated Values:

1	rptSzOnGlareTmrExp
2	rptSzOnGlareDet
3	rptRelOnGlareTmrExpAndGoOnHook
4	goOnHookOnGlareDet

.1.3.6.1.4.1.9.9.314.1.6.1.1.2

ccasGCnfParmSource

This object indicates whether GW should read the CAS
related timer parameters from the CAS Variant file
downloaded for that endpoint or to read from the MIB.
This gives the flexibility of configuring different CAS
r…

Enumerationr/w

Enumerated Values:

1	casVariantFile
2	mib

.1.3.6.1.4.1.9.9.314.1.6.1.1.3

ccasGCnfRegSigMode

This object specifies the register signaling mode for a
R2 registers.

CASRegisterSignalr/w

Textual Convention: CASRegisterSignal Enumeration

Type Values:

1	compelled
2	noncompelled
3	semicompelled

.1.3.6.1.4.1.9.9.314.1.6.1.1.4

ccasGCnfLineSigType

This object specifies the line signaling type that will be
used for the R2 line signaling.
. digital (1): The digital line signaling is typically used
for PCM systems. Only A and B bits are used to indicate
lin…

Enumerationr/w

Enumerated Values:

1	digital
2	analog
3	pulse

.1.3.6.1.4.1.9.9.314.1.6.1.1.5

ccasGCnfRingBackType

This object specifies the ring back signal type of FGD
protocol.
. wink (1): A pulse which is a timed transition from on
hook to off hook and back to on hook.
. wink and tone (2): A pulse which is a timed transitio…

Enumerationr/w

Enumerated Values:

1	wink
2	winkAndTone

.1.3.6.1.4.1.9.9.314.1.6.1.1.6

ccasGCnfIncCallHiFreqPower

This object specifies the power of the high frequency signal
component for incoming call.

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.7

ccasGCnfIncCallLoFreqPower

This object specifies the power of the low frequency signal
component for incoming call.

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.8

ccasGCnfIncCallNegTwist

This object specifies a negative power twist when the
power level of the low frequency component is set to
relatively higher than the high frequency component
for incoming call.

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.9

ccasGCnfIncCallPosTwist

This object specifies a positive power twist when the
power level of the high frequency component is set to
relatively higher than the low frequency component for
incoming call.

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.10

ccasGCnfIncCallBreakThreshold

This object specifies a power level which is used for
detection of on hook to off hook transition for incoming
call.

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.11

ccasGCnfOutCallLoFreqPower

This object specifies the power level of the low frequency
component for outgoing call.
The power level of the high frequency component of outgoing
call is relative above or below the value specified in object
ccasG…

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.12

ccasGCnfOutCallPowerTwist

This object specifies the relative power level of the
high frequency component for outgoing call.
When this object is set to 0, the power level of both
frequency components is set to the same level.
When this object is …

dBmInteger32r/w

Constraints:
range: -1000-1000

.1.3.6.1.4.1.9.9.314.1.6.1.1.13

ccasGCnfOutCadenceOntime

This object specifies the duration during which the digit
tone is generated for outgoing call.

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.6.1.1.14

ccasGCnfOutCadenceOfftime

This object specifies the silence between digit tones
for outgoing call.

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.6.1.1.15

ccasGCnfCountryCode

This object specifies the country code digits.

OctetStringr/w

Constraints:
range: 1-8

.1.3.6.1.4.1.9.9.314.1.6.1.1.16

ccasGCnfEchoCancellation

This object specifies the echo cancellation mode, and
it is applicable to an outgoing R2 register.

Enumerationr/w

Enumerated Values:

1	noEchoRequired
2	outgoingHalfEchoRequired
3	outgoingHalfEchoSuppressorInserted
4	incomingHalfEchoSuppressorRequired

.1.3.6.1.4.1.9.9.314.1.6.1.1.17

ccasGCnfSubscriberCategory

This object specifies the subscriber category types:
. (1) subscriber without priority
. (2) subscriber with priority
. (3) maintenance equipment
. (4) operator call …

Enumerationr/w

Enumerated Values:

1	subscriberWithoutPriority
2	subscriberWithPriority
3	maintenanceEquipment
4	operatorCall
5	dataNationalTransmission
6	subscriberOrOperatorWithoutForwardTransfer
7	operatorWithForwardTransfer
8	dataInternationalTransmission

.1.3.6.1.4.1.9.9.314.1.6.1.1.18

ccasGCnfNatureOfCircuit

This object specifies if there is any satellite link in
the path:
. (1) Satellite link is not included.
. (2) Satellite link is included.

Enumerationr/w

Enumerated Values:

1	notIncluded
2	included

.1.3.6.1.4.1.9.9.314.1.6.1.1.19

ccasGCnfCompelledSignalingType

This object specifies the Compelled Signaling type:
. enbloc (1): The called number is forwarded in a block.
. overlap (2): The called numder is forwarded one at a time.
. endtoend (3): The signaling between register ov…

Enumerationr/w

Enumerated Values:

1	enbloc
2	overlap
3	endtoend

.1.3.6.1.4.1.9.9.314.1.6.1.1.20

ccasGCnfTxDigitOrder

This object specifies the transmit digit order in which
ANI and DNIs will be dialled out when the controlling
application gives both the the calling party number and
the called party number to the CAS module for dia…

Enumerationr/w

Enumerated Values:

1	aniDnis
2	dnisAni

.1.3.6.1.4.1.9.9.314.1.6.1.1.21

ccasGCnfDigitDetectMode

This objects specifies the digit detect mode that the
GW should be opened with for reception of digits.
. dtmf (1): Dual tone multifrequency
. mf (2): Multifrequency
. dp (3): Dial pulse
This object applies to non R2 i…

Enumerationr/w

Enumerated Values:

1	dtmf
2	mf
3	dp

.1.3.6.1.4.1.9.9.314.1.6.1.1.22

ccasGCnfMeteringRepIntThresh

This object specifies the duration between two consecutive
metering pulses, if it changes more than value specified
in this parameter then an event will be triggered to MGC.

millisecondsUnsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.6.1.1.23

ccasGCnfStartTimer

This object specifies the amount of time that the GW
must wait for receiving digits after generating the
seize ACK or start dial indication for an incoming
call.
The value of 0 indicates the timer will not be starte…

secondsUnsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.9.9.314.1.6.1.1.24

ccasGCnfLongTimer

This object specifies the period between receiving
digits. The timer is not started until the first digit
is received.
The GW starts this timer during digit collection when
at least one or more digits is required for…

secondsUnsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.9.9.314.1.6.1.1.25

ccasGCnfShortTimer

This object specifies the period between receiving
digits.
The GW starts this timer during digit collection when
the digit string that it has collected matches at least
one pattern in the digit map, but reception of …

secondsUnsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.9.9.314.1.6.1.1.26

ccasGCnfLongDurationTimer

This object specifies long duration event when placed
in front of a digit. It indicates that that position is
satisfied only if the duration of the event exceeds the
long-duration threshold.

millisecondsUnsigned32r/w

Constraints:
range: 100-9900

.1.3.6.1.4.1.9.9.314.1.6.1.1.27

ccasGCnfMGCTimer

This object specifies the timer in the GW waiting for
the MGC to provide the rest of the information for CAS
signaling.
During overlap CAS signaling, for an outgoing call, the
MGC might specify a part of the digits to b…

millisecondsUnsigned32r/w

Constraints:
range: 0-100000

.1.3.6.1.4.1.9.9.314.1.6.1.1.28

ccasGCnfDigitType

This object specifies the digit type to pulsed from the
GW such as:
.dtmf - Dual tone multifrequency.
.mf - Multifrequency.
.dp - Dial pulse.
This parameter can be overridden by MGC. In the event
that the MGC do…

Enumerationr/w

Enumerated Values:

1	dtmf
2	mf
3	dp

.1.3.6.1.4.1.9.9.314.1.6.1.1.29

ccasGCnfEndPointDirectional

This object specifies the direction in which CAS calls
will be accepted on this endpoint.
.bidirectional - Accepts both incoming and outgoing calls.
.incoming - Accepts incoming calls only.
.outgoing - Accepts outgoi…

Enumerationr/w

Enumerated Values:

1	bidirectional
2	incoming
3	outgoing

.1.3.6.1.4.1.9.9.314.1.6.1.1.30

ccasGCnfPulseReceiveTimeout

This object specifies the time that the MG should wait
for the receipt of pulse (on hook pulse or off hook
pulse).
The value of 0 indicates the timer will not be started
and MG would wait forever.

secondsUnsigned32r/w

Constraints:
range: 0-100000

.1.3.6.1.4.1.9.9.314.1.6.1.1.31

ccasGCnfInitialDelay

This object specifies the initial delay that must be applied
on an outgoing trunk before the digits are pulse out.
The value of 0 indicates the timer, ccasGCnfInitialDelay
will start immediately.

millisecondsUnsigned32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.9.9.314.1.6.1.1.32

ccasGCnfMaxNumCallParty

This object specifies the maximum number of calling party
digits to collect for reporting to the MGC.
The MGC can overridden this value, and a value of 0 indicates
that there is no limit and all numbers till end of cal…

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.9.314.1.6.1.1.33

ccasGCnfRowStatus

This object is used for adding, modifying, deleting the
entries from the ccasExtIfGeneralConfigTable.
A default entry with index value 1 is created at
initialization, and it can not be modified or deleted.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.9.9.314.1.6.1.1.34