ccasILSMaxBreakTime
CISCO-CAS-IF-EXT-MIB ·
.1.3.6.1.4.1.9.9.314.1.3.1.1.10
Object
column
r/w
milliseconds Unsigned32
This object specifies the maximum time for which the ABCD bit pattern being received on the line, and go back to its original signal pattern after the make pattern has been asserted. The value of 0 indicates there is no maximum break time for this signal. The value of ccasILSMaxBreakTime must be greater than and equal ccasILSMinMakeTime. If the value is non-zero and the state change lasts longer than the maximum break time specified, it does not match the signal name.
Context
- MIB
- CISCO-CAS-IF-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.314.1.3.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- ccasIfExtIncomingLineSignalEntry
- Table
- ccasIfExtIncomingLineSignalTable
- Siblings
- 8
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasILSSignalNameIndex This object specifies the Signal Name index for the various
CAS line signals.
This object along with the cmgwIndex and ccasVariantIndex
identify an unique entry in this table. | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.3.1.1.2 |
| ccasILSSignalName This object indicates CAS signal name corresponding to the
ccasILSSignalNameIndex.
The media gateway uses ccasILSRxPattern along with following
objects:
ccasILSMatchedRxPattern
… | column | OctetString | .1.3.6.1.4.1.9.9.314.1.3.1.1.3 |
| ccasILSRxPattern This object indicates the ABCD bit pattern of the signal
being received on the DS0. | column | CASLineSignal | .1.3.6.1.4.1.9.9.314.1.3.1.1.4 |
| ccasILSMatchedRxPattern This object indicates the previous matched ABCD bit pattern
that was received on the DS0. | column | CASLineSignal | .1.3.6.1.4.1.9.9.314.1.3.1.1.5 |
| ccasILSMatchedTxPattern This object indicates the current ABCD bit pattern being
transmitted on the DS0. | column | CASLineSignal | .1.3.6.1.4.1.9.9.314.1.3.1.1.6 |
| ccasILSMinMakeTime This object specifies the minimum time for which the received
pattern (ccasILSRxPattern) must persist to be considered
a valid state change or transition.
If the state change las… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.3.1.1.7 |
| ccasILSMaxMakeTime This object specifies the maximum time for which the Rx
pattern (ccasILSRxPattern) must persist to be considered
a valid state change or transition.
The value of 0 indicates the… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.3.1.1.8 |
| ccasILSMinBreakTime This object specifies the minimum time for which the ABCD
bit pattern being received on the line, and should go back
to its original signal pattern after the make pattern has
… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.3.1.1.9 |