ccasIfExtVoiceCfgGwyLinkId
CISCO-CAS-IF-EXT-MIB ·
.1.3.6.1.4.1.9.9.314.1.1.1.1.18
Object
column
r/w
Integer32
This object specifies the H.248 media gateway link that this DS0 group belongs to. This object is applicable only if the value of ccasGrpCfgServiceType is 'h248(9)'.
Context
- MIB
- CISCO-CAS-IF-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.314.1.1.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ccasIfExtVoiceCfgEntry
- Table
- ccasIfExtVoiceCfgTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasIfExtVoiceCfgLifNumber This object specifies the LIF (Logical InterFace) number
associated with this voice interface.
If this object is set to 0, this interface does not have
an associat… | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.1 |
| ccasIfExtVoiceCfgT38HsRedundancy deprecated The object specifies the number of redundant FAX packets
for Internet FAX protocol (IFP) packet transmission.
The value of '0' indicates that no redundant Internet
FAX packets … | column | FAX packets Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.10 |
| ccasIfExtVoiceCfgRepetition This object is used to repeatedly apply the writable objects
of ccasIfExtVoiceCfgTable specified in the same SNMP PDU
starting from the row specifies by the index of the instance… | column | CISCO-TCConfigIterator | .1.3.6.1.4.1.9.9.314.1.1.1.1.11 |
| ccasIfExtVoiceCfgBulkCfgOwner This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.
The value of this object is set by the SNMP manager
with its own i… | column | RMON-MIBOwnerString | .1.3.6.1.4.1.9.9.314.1.1.1.1.12 |
| ccasIfExtVoiceCfgBulkCfgResult This object is used for error checking of the operation
specified in ccasIfExtVoiceCfgRepetition.
This object indicates the result of the bulk configuration
initiat… | column | CISCO-TCBulkConfigResult | .1.3.6.1.4.1.9.9.314.1.1.1.1.13 |
| ccasIfExtVoiceCfgVadTimer This object specifies the hangover time for VAD.
Once the voice inactivity is detected, gateway will wait
for this duration before activating silence suppression. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.14 |
| ccasIfExtVoiceCfgICSEnable This object specifies whether the Idle Channel suppression
(ICS) is enabled for an AAL2 connection. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.314.1.1.1.1.15 |
| ccasIfExtVoiceCfgICSIntTimer This object specifies a timeout value for ICS integration
timer. This timer is started once channel idle is detected.
When the timer is expired, the gateway will stop transmitting… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.16 |
| ccasIfExtVoiceCfgTonePlan This object specifies which tone plan the DS0 group is
using for playing the tones. | column | CISCO-MEDIA-GATEWAY-MIBCVoiceTonePlanIndexOrZero | .1.3.6.1.4.1.9.9.314.1.1.1.1.17 |
| ccasIfExtVoiceCfgH248PkgIds This object specifies the H.248 packages supported in
this DS0 group.
This object is applicable only if the value of
ccasGrpCfgServiceType is 'h248(9)'. | column | CISCO-MEGACO-EXT-MIBCH248Packages | .1.3.6.1.4.1.9.9.314.1.1.1.1.19 |
| ccasIfExtVoiceCfgCcntrlProfile This object specifies the index of call control profile that
is used by this DS0 group.
If the value of ccasGrpCfgServiceType is 'mgcp(6)',
this is the index of cxeCallCtrlProfil… | column | CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZero | .1.3.6.1.4.1.9.9.314.1.1.1.1.2 |
| ccasIfExtVoiceCfgEventMappingIdx This object specifies the action of the voice band data
signal events handling in this DS0 group.
The real-time detected voice band data events are categorized
by VoiceBandDataE… | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.20 |
| ccasIfExtVoiceCfgGatewayIndex This object specifies the media gateway index that
this DS0 group belong to.
The value of this object is cmgwIndex in cMediaGwTable. | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.21 |
| ccasIfExtVoiceCfgCasProfile This object specifies the index of CAS profile that
is used by this DS0 group. The value of this object
is ccasProfileIndex in ccasIfExtProfileTable.
This object is applicable onl… | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.22 |
| ccasIfExtVoiceCfgCasVariant This object specifies the index of CAS variant that
is used by this DS0 group. The value of this object
is the same as the value of ccasVariantIndex in
ccasIfExtVariantTable.
… | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.23 |
| ccasIfExtVoiceCfgDs0ChannelsFail This object contains the bit map of the failure DS0
channels in the DS0 group.
The MSB (most significant bit) is DS0 channel number 1.
For T1, only higher 24 bits are used to spe… | column | OctetString | .1.3.6.1.4.1.9.9.314.1.1.1.1.24 |
| ccasIfExtVoiceCfgNoiseRegType This object specifies the type of comfort noise generation:
(1) none: No comfort noise generation
(2) simple: Cisco Proprietary comfort noise generation
(3) g711A2:… | column | Enumeration | .1.3.6.1.4.1.9.9.314.1.1.1.1.25 |
| ccasIfExtVoiceCfgVadEnabled The object specifies VAD (Voice Activity Detection)
is enabled for the compression DSPs of this interface.
The value of this object is 'false' if the voice
interfa… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.314.1.1.1.1.3 |
| ccasIfExtVoiceCfgContinuityTone1 The object specifies the first frequency tone to be
sent between the terminating and the originating gateways
in the continuity test. | column | Hz Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.4 |
| ccasIfExtVoiceCfgContinuityTone2 The object specifies the second frequency tone to be
sent between the terminating and the originating gateways
in the continuity test. | column | Hz Unsigned32 | .1.3.6.1.4.1.9.9.314.1.1.1.1.5 |
| ccasIfExtVoiceCfgModemPassThru This object specifies the modem pass-through mode:
(1) passThruDisabled: Modem pass-through is disabled
(2) passThruCisco: Cisco Proprietary PV (Protocol
… | column | Enumeration | .1.3.6.1.4.1.9.9.314.1.1.1.1.6 |
| ccasIfExtVoiceCfgUpspeedCodec This object specifies the CODEC type to use for modem upspeed.
Upspeed is to change the transmission rate of the voice
interface to a higher rate of CODEC type. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRate | .1.3.6.1.4.1.9.9.314.1.1.1.1.7 |
| ccasIfExtVoiceCfgT38MaxFaxTxRate deprecated This object specifies the maximum FAX relay transmission
rate. | column | CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate | .1.3.6.1.4.1.9.9.314.1.1.1.1.8 |
| ccasIfExtVoiceCfgT38HsPktPeriod deprecated This object specifies the period of time for primary high
speed (HS) data packet. | column | microseconds CISCO-VOICE-AALX-PROFILE-MIBCiscoCodecPacketPeriod | .1.3.6.1.4.1.9.9.314.1.1.1.1.9 |