ccasRSTOutFwdPulseOffTimer
CISCO-CAS-IF-EXT-MIB ·
.1.3.6.1.4.1.9.9.314.1.5.2.1.7
Object
column
r/w
milliseconds Unsigned32
This object specifies the interval between two forward pulse tones. This object applies to outgoing R2 registers where the forward signals are sent as pulses for non-compelled signaling.
Context
- MIB
- CISCO-CAS-IF-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.314.1.5.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- ccasIfExtRegSignalTimerEntry
- Table
- ccasIfExtRegSignalTimerTable
- Siblings
- 12
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasRSTIndex An arbitrary index that uniquely identifies a
entry in the ccasIfExtRegSignalTimerTable.
The index of 1 is reserved for the default entry. | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.1 |
| ccasRSTIncomingRegSigDuration This object specifies the duration within which the register
signaling should complete for an incoming call.
This timer is started as soon as the first forward register
signal i… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.10 |
| ccasRSTOutgoingRegSigDuration This object specifies the duration within which the register
signaling should complete for an outgoing call.
This timer is started when the first forward register signal
is sent … | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.11 |
| ccasRSTCalledPartyInterDigTimer This object specifies the interdigit timer for the
collection of called party number (DNIS) for R2 signaling
when there is no digit map associated with the digits
being gathered.
… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.12 |
| ccasRSTRowStatus This object is used for adding, deleting and modifying
the entries from the ccasIfExtRegSignalTimerTable.
A default entry with index value 1 is created at
initialization, and it… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.314.1.5.2.1.13 |
| ccasRSTAnswerSigTimer This object specifies the timer that is started
after having sent out the last forward digit within
which the backward register answer signal should be
received.
No… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.2 |
| ccasRSTCompelledFwdToneOnTimer This object specifies the period for which the forward
digit tone stays on, waiting for a reception of the
backward signal in compelled signaling.
This timer is started after … | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.3 |
| ccasRSTCompelledFwdToneOffTimer This object specifies the period for which the forward
signal digit is turned off in compelled signaling.
This timer is started after the backward signal is
received and after … | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.4 |
| ccasRSTCompelledBwdToneOnTimer This object specifies the period for which the backward
signal stays on waiting for the forward digit signal to
go off in compelled signaling.
This timer is started after the … | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.5 |
| ccasRSTOutFwdPulseOnTimer This object specifies the timer is started after the
forward digit tone is sent out. Tone is turned off
after the timer expires.
This object applies to outgoing R2 registers whe… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.6 |
| ccasRSTIncFwdPulseOnTimer This object specifies the period for which the forward
digit pulse can be on. The timer is started after the
forward digit signal is received, and stays on until
the forward… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.8 |
| ccasRSTBwdPulseOnTimer This value specifies the period for which the backward
pulse is on before it is turned off.
This object applies to incoming R2 registers where the
forward signals are receive… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.314.1.5.2.1.9 |