ccasRSCountry
CISCO-CAS-IF-EXT-MIB ·
.1.3.6.1.4.1.9.9.314.1.4.1.1.2
Object
column
r/w
CASCountryCode
This object specifies the country where the meaning for the signal definition/action applies. This parameter is mandatory when creating an entry. When the R2 country (ITU or other) is specified, the default values for the rest of the MIB objects are populated based on this.
Context
- MIB
- CISCO-CAS-IF-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.314.1.4.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ccasIfExtRegisterSignalEntry
- Table
- ccasIfExtRegisterSignalTable
- Siblings
- 66
Syntax
CASCountryCode
- Source
- CASCountryCode
- Base type
Enumeration
Values & Constraints
Type Values
1 | itu |
2 | argentina |
3 | australia |
4 | bolivia |
5 | brazil |
6 | bulgaria |
7 | china |
8 | colombia |
9 | costaRica |
10 | croatia |
11 | eastEurope |
12 | ecuadorIT |
13 | ecuadorLME |
14 | greece |
15 | guatemala |
16 | hongKong |
17 | india |
18 | indonesia |
19 | israel |
20 | korea |
21 | laos |
22 | malaysia |
23 | malta |
24 | mongolia |
25 | newZealand |
26 | paraguay |
27 | peru |
28 | philippines |
29 | saudiArabia |
30 | singapore |
31 | southAfrica |
32 | telemex |
33 | telnor |
34 | thailand |
35 | uruguay |
36 | venezuela |
37 | vietnam |
38 | bemilcom |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccasRSIndex This is an arbitrary index that uniquely identifies an
entry in this table. This parameter is mandatory when
creating an entry. | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.4.1.1.1 |
| ccasBwdRSAddrCompleteGroupA This object specifies a backward signal indicating that the
R2 register at the incoming end needs no additional digit,
but will not send Group B signals.
The call has to be ch… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.10 |
| ccasBwdRSPrevNminus2Digit This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 2) after reception
of digit n.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.11 |
| ccasBwdRSPrevNminus3Digit This object specifies a backward signal requesting the
sending of the ANI or DNIS digit (n - 3) after reception
of digit n.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.12 |
| ccasBwdRSCountryCode This object specifies a backward signal requesting the
country code indicator.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.13 |
| ccasBwdRSLangDiscr This object specifies a backward signal requesting the
language digit or the discriminating digit.
. Operator assistance: requesting a language digit.
. Automatic call: request… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.14 |
| ccasBwdRSNatureOfCircuit This object specifies a backward signal requesting
information regarding the nature of the circuits involved
in the connection so far, i.e. satellite link or not.
The default … | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.15 |
| ccasBwdRSInfoEchoSuppressor This object specifies a backward signal requesting
information regarding the nature of echo suppressor being
used in the connection.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.16 |
| ccasBwdRSInternationalCongst This object specifies a backward signal indicating:
. Congestion on international links.
. Congestion in selection stages at an international
transit exchange or at a terminal … | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.17 |
| ccasBwdRSXtoGroupC This object specifies a backward signal requesting switch
to reception of group C signals.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.18 |
| ccasBwdRSRepeatLastDigit This object specifies a backward signal requesting
resending of the last digit just sent out.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.19 |
| ccasBwdRSRepeatCalledDigit This object specifies a backward signal requesting for
out pulsing of the called digits or DNIS from beginning.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.20 |
| ccasBwdRSPlaySITTone This object specifies a backward signal indicating that
SIT tone should be played towards the calling party.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.21 |
| ccasBwdRSSubscriberLineBusy This object specifies a backward signal indicating that
the line or lines connecting the called subscriber to
the exchange are busy or engaged.
The default value is country spe… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.22 |
| ccasBwdRSNetworkCongstInGroupB This object specifies a backward signal indicating that
congestion condition has occured after the changeover
to Group B signals.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.23 |
| ccasBwdRSInvalidDialedNumber This object specifies a backward signal indicating that the
dialed or called number is invalid or not in use (e.g. an
unused country code, an unused trunk code or subscriber
nu… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.24 |
| ccasBwdRSSubLineFreeWithCharge This object specifies a backward signal indicating that
the called party's line is free and that the call has to
be charged on answer.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.25 |
| ccasBwdRSSubLineFreeWithNoCharge This object specifies a backward signal indicating that
the called party line is free but is not to be charged
on answer.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.26 |
| ccasBwdRSSubLineOutOfOrder This object specifies a backward signal indicating that the
called party line is out of service or faulty.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.27 |
| ccasBwdRSAnnouncement This object specifies a backward signal indicating that an
announcement follows this indication.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.28 |
| ccasBwdRSXtoGrpASendNextDNIS This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the next
DNIS digit.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.29 |
| ccasRSSubRegion This object is used to describe a variation within a
particular country. | column | OctetString | .1.3.6.1.4.1.9.9.314.1.4.1.1.3 |
| ccasBwdRSXtoGrpASendDNISFrmBeg This object specifies a backward signal requesting the other
exchange to switch to reception of group A and send the DNIS
digits from the beginning.
The default value is country… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.30 |
| ccasBwdRSXtoGrpAResendLastDNIS This object specifies a backward signal requesting the other
exchange to switch to reception of group A and resend the last
DNIS digit sent out.
The default value is country spe… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.31 |
| ccasBwdRSSSendCatSwGrpB This object specifies a backward signal requesting the end
receiving this signal to send the subscriber category
information and switch to grp B from group C.
The default value … | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.32 |
| ccasBwdRSSGrpCCong This object specifies a backward signal indicating that
congestion occurred in the network when in group C signaling
state.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.33 |
| ccasFwdRSANIDigitAvailable This object specifies a forward signal indicating that ANI
digits are available.
This is used in country variants like India to indicate
that the ANI digits are available when t… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.34 |
| ccasFwdRSANIDigitNotAvailable This object specifies a forward signal indicating that
there are no ANI digits available for out pulsing.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.35 |
| ccasFwdRSEndANICallingPartyNotRev This object specifies a forward signal indicating
that there are no more ANI digits to out pulse and the
calling party can not be revealed to the called party.
The default valu… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.36 |
| ccasFwdRSEndANICallingPartyRev This object specifies a forward signal indicating that
there are no more ANI digits to out pulse and the calling
party can be revealed to the called party.
The default value is… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.37 |
| ccasFwdRSEndOfDNISDigit This object specifies a forward signal indicating the end
of DNIS digits.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.38 |
| ccasFwdRSNoCategoryAvailble This object specifies a forward signal indicating that
there is no calling party category (information) available
to be sent out.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.39 |
| ccasBwdRSNextDigitANI This object specifies a backward signal requesting
transmission of the next ANI digit (n + 1) after
reception of digit n.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.4 |
| ccasFwdRSCCEchoSuppressor This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call requi… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.40 |
| ccasFwdRSCCNoEchoSuppressor This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The call may no… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.41 |
| ccasFwdRSCCInsertEchoSuppressor This object specifies a forward signal. When it is used
as the first forward signal and it indicates that:
. A country code will follow on an international link.
. The outgoing h… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.42 |
| ccasFwdRSIncHalfEchoRequired This object specifies a forward signal indicating that:
. The outgoing half echo suppressor has been inserted.
. The incoming half echo suppressor is required.
The default value… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.43 |
| ccasFwdRSTestCall This object specifies a forward signal. When it is used
as the first forward signal and indicates that the call
is being originated by test equipment.
The default value is coun… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.44 |
| ccasFwdRSSatelLinkIncluded This object specifies a forward signal indicating that
a satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature o… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.45 |
| ccasFwdRSSatelLinkNotIncluded This object specifies a forward signal indicating that
no satellite link is included in the connection.
This signal is sent in response to backward signal
requesting for nature … | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.46 |
| ccasFwdRSDiscriminatorDigit This object specifies a forward signal indicating the
digit that separates or distinguishes different information
blocks in the forward signals being generated or received.
Th… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.47 |
| ccasFwdRSOtherLanguage This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.48 |
| ccasFwdRSOtherLanguage1 This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.49 |
| ccasBwdRSNextDigitDNIS This object specifies a backward signal requesting
transmission of the next DNIS digit (n + 1) after
reception of digit n.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.5 |
| ccasFwdRSOtherLanguage2 This object specifies a forward signal indicating that the
language to be used for an operator assisted call.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.50 |
| ccasFwdRSRequestNotAccepted This object specifies a forward signal indicating that the
receiving backward signal could not be processed or defined.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.51 |
| ccasFwdRSSubWithoutPriorNational This object specifies a forward signal indicating that the
call is set up from a subscriber's line and is non-priority.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.52 |
| ccasFwdRSSubPriorNational This object specifies a forward signal indicating that the
call is set up from a subscriber's line to which priority
treatment of calls has been accorded. This signal is specifi… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.53 |
| ccasFwdRSSubPriorInternational This object specifies a forward signal indicating that the
call is set up from a subscriber's line to which priority
treatment of calls has been accorded. This signal is specifi… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.54 |
| ccasFwdRSMaintenanceEquipment This object specifies a forward signal indicating that
the call comes from maintenance equipment.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.55 |
| ccasFwdRSOperatorCall This object specifies a forward signal indicating that
the call is setup from an operator.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.56 |
| ccasFwdRSDataTransNational This object specifies a forward signal indicating that
the call is being used for national data transmission.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.57 |
| ccasFwdRSDataTransInternational This object specifies a forward signal indicating that
the call is being used for international data transmission.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.58 |
| ccasFwdRSOperNoFwdTransFacility This object specifies a forward signal indicating the call
is being set up from a subscriber's line, operator's
position or from maintenance equipment and no forward
transfer si… | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.59 |
| ccasBwdRSPrevDigit This object specifies a backward signal requesting
transmission of the previous ANI or DNIS digit (n - 1)
after reception of digit n.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.6 |
| ccasFwdRSOperFwdTransFacility This object specifies a forward signal indicating the call
is set up from an operator's position with possibility of
recourse to the forward transfer facility.
The default value … | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.60 |
| ccasFwdRSSubsrcWithMeter This object specifies a forward signal indicating the
subscribers have a meter.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.61 |
| ccasFwdRSSubsrcWithIDD This object specifies a forward signal indicating the
subscribers have an International Direct Dial facility.
The default value is country specific. | column | CASForwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.62 |
| ccasRSInterpreFirstANIDigit This object is used to interpret the meaning of the first
ANI digit for both receiving and transmitting when sent
and received.
.firstANIDigit: First ANI digit.
.aniAvailableOr… | column | Enumeration | .1.3.6.1.4.1.9.9.314.1.4.1.1.63 |
| ccasRSGetValueFromValidIndex This object specifies the entry index from which values
for the objects not specified in the set operation will
be copied over from.
If both the country index and this object a… | column | Unsigned32 | .1.3.6.1.4.1.9.9.314.1.4.1.1.64 |
| ccasRSSeqInfCollect This object determines the sequence in which information
will be gathered by the incoming register.
Only a set of predefined characters can be used in the
octet str… | column | OctetString | .1.3.6.1.4.1.9.9.314.1.4.1.1.65 |
| ccasRSSendFirstFwdSig This object specifies the information element that will
take precedence when being sent out as the first forward
register signal for an outgoing call. This can be either
the fi… | column | Enumeration | .1.3.6.1.4.1.9.9.314.1.4.1.1.66 |
| ccasRSRowStatus This object is used for adding, modifying, and deleting
the entries from the ccasRegisterSignalTable.
A default entry with index value 1 is created at
initialization, and it ca… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.314.1.4.1.1.67 |
| ccasBwdRSXtoGroupBSignals This object specifies a backward signal indicating that the
incoming R2 register at the incoming end needs no additional
address digit and is about to go over to transmission of… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.7 |
| ccasBwdRSCongestion This object specifies a backward signal indicating that:
. Congestion of national links.
. Congestion in selection stages of terminal international
or national exchanges.
. Occ… | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.8 |
| ccasBwdRSCallingPartyCategory This object specifies a backward signal requesting for a
calling party category information or a Group II signal.
The default value is country specific. | column | CASBackwardSignal | .1.3.6.1.4.1.9.9.314.1.4.1.1.9 |