ccasRSTBwdPulseOnTimer

Object

column r/w milliseconds Unsigned32

This value specifies the period for which the backward  
pulse is on before it is turned off. 
This object applies to incoming R2 registers where the  
forward signals are received either continuously or as  
a pulse but the backward signals are sent as a pulse  
in semi-compelled or non-compelled signaling mode 
respectively.
              
It also applies to compelled signaling where certain 
backward signals are sent as pulses.

Context

MIB: CISCO-CAS-IF-EXT-MIB
OID: .1.3.6.1.4.1.9.9.314.1.5.2.1.9
Type: column
Access: readwrite
Status: current
Units: milliseconds
Parent: ccasIfExtRegSignalTimerEntry
Table: ccasIfExtRegSignalTimerTable
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ccasRSTIndex An arbitrary index that uniquely identifies a entry in the ccasIfExtRegSignalTimerTable. The index of 1 is reserved for the default entry.	column	Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.1`
ccasRSTIncomingRegSigDuration This object specifies the duration within which the register signaling should complete for an incoming call. This timer is started as soon as the first forward register signal i…	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.10`
ccasRSTOutgoingRegSigDuration This object specifies the duration within which the register signaling should complete for an outgoing call. This timer is started when the first forward register signal is sent …	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.11`
ccasRSTCalledPartyInterDigTimer This object specifies the interdigit timer for the collection of called party number (DNIS) for R2 signaling when there is no digit map associated with the digits being gathered. …	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.12`
ccasRSTRowStatus This object is used for adding, deleting and modifying the entries from the ccasIfExtRegSignalTimerTable. A default entry with index value 1 is created at initialization, and it…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.314.1.5.2.1.13`
ccasRSTAnswerSigTimer This object specifies the timer that is started after having sent out the last forward digit within which the backward register answer signal should be received. No…	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.2`
ccasRSTCompelledFwdToneOnTimer This object specifies the period for which the forward digit tone stays on, waiting for a reception of the backward signal in compelled signaling. This timer is started after …	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.3`
ccasRSTCompelledFwdToneOffTimer This object specifies the period for which the forward signal digit is turned off in compelled signaling. This timer is started after the backward signal is received and after …	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.4`
ccasRSTCompelledBwdToneOnTimer This object specifies the period for which the backward signal stays on waiting for the forward digit signal to go off in compelled signaling. This timer is started after the …	column	seconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.5`
ccasRSTOutFwdPulseOnTimer This object specifies the timer is started after the forward digit tone is sent out. Tone is turned off after the timer expires. This object applies to outgoing R2 registers whe…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.6`
ccasRSTOutFwdPulseOffTimer This object specifies the interval between two forward pulse tones. This object applies to outgoing R2 registers where the forward signals are sent as pulses for non-compelled…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.7`
ccasRSTIncFwdPulseOnTimer This object specifies the period for which the forward digit pulse can be on. The timer is started after the forward digit signal is received, and stays on until the forward…	column	milliseconds Unsigned32	`.1.3.6.1.4.1.9.9.314.1.5.2.1.8`

Object

Context

Syntax

Values & Constraints

Related Objects