BIANCA-BRICK-X25-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
8
Rows
8
Columns
171
.1.3.6.1.4.1.272.4.6.1
·
1 row entry
·
28 columns
This table contains an entry for each active link. There may be mutiple active links per interface. For point-to- multipoint interfaces, the field x25LkAddr specifies the (MAC-) address of the partner, the link leads to. There may be also multiple links for a point-to-point interface in a multilink environment without a multilink- protocol joining the multiple links to a singe logical link.
The x25LinkEntry is created automatically, when a link
becomes active. The entry is also removed automatically,
if a link becomes disconnected. It may be removed manually
by setting the field x25LinkState to delete, whi…
becomes active. The entry is also removed automatically,
if a link becomes disconnected. It may be removed manually
by setting the field x25LinkState to delete, whi…
Indexes
x25LkIfIndex
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25LkIfIndex
mandatory
The index of the interface the link is running on.
See ifTable. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.1.1.1 |
||||||||||||||||||||
|
x25LkAddr
mandatory
On point-to-multipoint interfaces, this field contains the
(MAC-)address of the partner, the link is leading to. It is empty for point-to-point interfaces, because there is only one partner at the other side. |
OctetString | .1.3.6.1.4.1.272.4.6.1.1.2 |
||||||||||||||||||||
|
x25LkMode
mandatory
This field indicates wheter the Layer 3 on top of the link
is operated in DTE or DCE mode. The difference is in the order of VC-assignment, the handling of a call collision and the range of allowed values of the cause f… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.3 |
||||||||||||||||||||
|
x25LkModulo
mandatory
This field indicates whether the layer 3 on top of the link
is in modulo 8 or in modulo 128 mode. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.4 |
||||||||||||||||||||
|
x25LkLIC
mandatory
Lowest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.5 |
||||||||||||||||||||
|
x25LkHIC
mandatory
Highest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.6 |
||||||||||||||||||||
|
x25LkLTC
mandatory
Lowest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.7 |
||||||||||||||||||||
|
x25LkHTC
mandatory
Highest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.8 |
||||||||||||||||||||
|
x25LkLOC
mandatory
Lowest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.9 |
||||||||||||||||||||
|
x25LkHOC
mandatory
Highest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels. |
Integer32 Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.1.1.10 |
||||||||||||||||||||
|
x25LkDefPktSize
mandatory
The default layer 3 packet size for this link.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.11 |
||||||||||||||||||||
|
x25LkDefWinSize
mandatory
The default window size. This is always less than 8, if the
layer 3 is operated in modulo 8 mode. |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.1.1.12 |
||||||||||||||||||||
|
x25LkMaxPktSize
mandatory
The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of the interface, which is always the uppe… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.13 |
||||||||||||||||||||
|
x25LkMaxWinSize
mandatory
The maximum allowable window size for this link during
window size negotiation. |
Integer32 Constraints: range: 0-127 |
.1.3.6.1.4.1.272.4.6.1.1.14 |
||||||||||||||||||||
|
x25LkL2WinSize
mandatory
The layer 2 window size for this link.
|
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.1.1.15 |
||||||||||||||||||||
|
x25LkL2RetrTimer
mandatory
The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted. |
Integer32 Constraints: range: 100-30000 |
.1.3.6.1.4.1.272.4.6.1.1.16 |
||||||||||||||||||||
|
x25LkL2RetrCounter
mandatory
The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated by this object, the link will be reset or disconnected, |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.1.1.17 |
||||||||||||||||||||
|
x25LkL2SupervTimer
mandatory
The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiated, when this timeout expires. |
Integer32 Constraints: range: 100-30000 |
.1.3.6.1.4.1.272.4.6.1.1.18 |
||||||||||||||||||||
|
x25LkL2IdleTimer
mandatory
The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been idle for the time specified by this object, the link will be disconnected. The value 1 means, that the lin… |
Integer32 Constraints: range: -1-30000 |
.1.3.6.1.4.1.272.4.6.1.1.19 |
||||||||||||||||||||
|
x25LkState
mandatory
This object contains the current state of the link. The
link may be manually disconnected by setting this object to the value delete. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.20 |
||||||||||||||||||||
|
x25LkNegotiation
mandatory
This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the call parameters differ from the default-settings. When set … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.1.1.21 |
||||||||||||||||||||
|
x25LkDiscDelayTimer
mandatory
The disc delay timer in milliseconds for the layer 2 of
this link (only outgoing links). This timer specifies the time interval between receiving of layer 2 disconnect and actual disconnect of link. If the partner want … |
Integer32 Constraints: range: 0-30000 |
.1.3.6.1.4.1.272.4.6.1.1.22 |
||||||||||||||||||||
|
x25LkCallDelayTimer
mandatory
The call delay timer in milliseconds for the layer 3 of
this link (only outgoing link). This timer specifies the time interval between restart procedure completion and virtual call setup. If restart procedure is comple… |
Integer32 Constraints: range: 0-30000 |
.1.3.6.1.4.1.272.4.6.1.1.23 |
||||||||||||||||||||
|
x25LkRestDelayTimer
mandatory
The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is established and the time specified by this o… |
Integer32 Constraints: range: 0-30000 |
.1.3.6.1.4.1.272.4.6.1.1.24 |
||||||||||||||||||||
|
x25LkRewritingRule
mandatory
This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value is set to zero, no rewriting will take p… |
Integer32 Constraints: range: 0-999999 |
.1.3.6.1.4.1.272.4.6.1.1.25 |
||||||||||||||||||||
|
x25LkL1IdleTimer
mandatory
The idle timer in milliseconds for the layer 1 of this
link. If layer 2 is disconnected and the time specified by this object expired, the layer 1 will be disconnected. The value 0 means, the layer 1 should not be dis… |
Integer32 Constraints: range: -1-30000 |
.1.3.6.1.4.1.272.4.6.1.1.26 |
||||||||||||||||||||
|
x25LkActSabmDelayTimer
mandatory
The sabm delay timer in milliseconds for this link (only
dialup outgoing link). This timer specifies the time interval between establishment of layer 1 and sending of SABM packet. If layer 1 is established and the tim… |
Integer32 Constraints: range: -1-30000 |
.1.3.6.1.4.1.272.4.6.1.1.32 |
||||||||||||||||||||
|
x25LkPsvSabmDelayTimer
mandatory
The passive sabm delay timer in milliseconds for this
link (only dialup incoming link). This timer specifies the time interval between establishment of layer 1 and sending of SABM packet. If layer 1 is established and… |
Integer32 Constraints: range: -1-30000 |
.1.3.6.1.4.1.272.4.6.1.1.33 |
.1.3.6.1.4.1.272.4.6.2
·
1 row entry
·
23 columns
This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a particular link, it will be setup with the default values. In any case, the parameters finally choosen for a link are displayed in the x25LinkTable. For point-to-multipoint interfaces, the parameters for the link may be set for all connected partners (x25LkPrAddr is empty) of for the specific partners individually (x25LkPrAddr is the MAC-address of the partner).
Entries in this table are created by defining a new value
for the field x25LkPrIfIndex. Entries may be deleted by
setting the field x25LkPrMode to the value delete. Please
note, that changing the entries dont have influ…
for the field x25LkPrIfIndex. Entries may be deleted by
setting the field x25LkPrMode to the value delete. Please
note, that changing the entries dont have influ…
Indexes
x25LkPrIfIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25LkPrIfIndex
mandatory
The interface index of the link to be predefined. This
object identifies a row in the ifTable. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.2.1.1 |
||||||||||||||
|
x25LkPrAddr
mandatory
On point-to-point links, this field must be empty. On
point-to-multipoint links, this field may be empty or set to a partners (MAC-) address. In the first case, the definition is valid for all links on the interface exc… |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.2.1.2 |
||||||||||||||
|
x25LkPrMode
mandatory
This field indicates, whether the link is initially operated
in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DCE<->DCE) the DTE/DCE assignement is done be means of the procedure defined in ISOxxxx. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.3 |
||||||||||||||
|
x25LkPrModulo
mandatory
This object indicates, whether the link should be operated
in modulo 8 or modulo 128 mode. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.4 |
||||||||||||||
|
x25LkPrLIC
mandatory
Lowest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.5 |
||||||||||||||
|
x25LkPrHIC
mandatory
Highest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.6 |
||||||||||||||
|
x25LkPrLTC
mandatory
Lowest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.7 |
||||||||||||||
|
x25LkPrHTC
mandatory
Highest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.8 |
||||||||||||||
|
x25LkPrLOC
mandatory
Lowest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.9 |
||||||||||||||
|
x25LkPrHOC
mandatory
Highest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels. |
Integer32r/w Constraints: range: -1-4095 |
.1.3.6.1.4.1.272.4.6.2.1.10 |
||||||||||||||
|
x25LkPrDefPktSize
mandatory
The Layer 3 packet size for this link.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.11 |
||||||||||||||
|
x25LkPrDefWinSize
mandatory
The default window size. This must be less than 8, if the
layer 3 is operated in modulo 8 mode. |
Integer32r/w Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.2.1.12 |
||||||||||||||
|
x25LkPrMaxPktSize
mandatory
The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of the interface, which is always the upper… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.13 |
||||||||||||||
|
x25LkPrMaxWinSize
mandatory
The maximum allowable window size for this link during
window size negotiation. |
Integer32r/w Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.2.1.14 |
||||||||||||||
|
x25LkPrL2WinSize
mandatory
The layer 2 window size for this link.
|
Integer32r/w Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.2.1.15 |
||||||||||||||
|
x25LkPrL2RetrTimer
mandatory
The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted. |
Integer32r/w Constraints: range: 100-30000 |
.1.3.6.1.4.1.272.4.6.2.1.16 |
||||||||||||||
|
x25LkPrL2RetrCounter
mandatory
The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated by this object, the link will be reset or disconnected. |
Integer32r/w Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.2.1.17 |
||||||||||||||
|
x25LkPrL2SupervTimer
mandatory
The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiated, when this timeout expires. |
Integer32r/w Constraints: range: 100-30000 |
.1.3.6.1.4.1.272.4.6.2.1.18 |
||||||||||||||
|
x25LkPrL2IdleTimer
mandatory
The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been idle for the time specified by this object, the link will be disconnected. The value 0 means, the link sho… |
Integer32r/w Constraints: range: -1-30000 |
.1.3.6.1.4.1.272.4.6.2.1.19 |
||||||||||||||
|
x25LkPrNegotiation
mandatory
This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the call parameters differ from the default-settings. When set … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.20 |
||||||||||||||
|
x25LkPrRestDelayTimer
mandatory
The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is established and the time specified by this o… |
Integer32r/w Constraints: range: 0-30000 |
.1.3.6.1.4.1.272.4.6.2.1.23 |
||||||||||||||
|
x25LkPrVC0
mandatory
This object indicates, whether VC#0 shall be allowed on
the link. If this object is set to enable, VC#0 is allowed and the value -1 shall be used to indicate the absence of specified channels. This invalidates old confi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.2.1.24 |
||||||||||||||
|
x25LkPrRewritingRule
mandatory
This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value is set to zero, no rewriting will take p… |
Integer32r/w Constraints: range: 0-999999 |
.1.3.6.1.4.1.272.4.6.2.1.25 |
.1.3.6.1.4.1.272.4.6.3
·
1 row entry
·
21 columns
This table contains an entry for each active X25-call. Calls always lead from a source-link to a destination-link. An interface index of 1 denotates a pseudo interfaces corresponding to all locally terminated calls.
The entries are created automatically, as soon as a call
gets active. They are removed automatically as soon as
a call gets completely cleared. A call may also be cleared
manually by setting the x25CallState field of an…
gets active. They are removed automatically as soon as
a call gets completely cleared. A call may also be cleared
manually by setting the x25CallState field of an…
Indexes
x25CallSrcIfIndex x25CallSrcVCNumber x25CallDstIfIndex x25CallDstVCNumber
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25CallSrcIfIndex
mandatory
The interface index of the link, the call comes from.
This object contains the value 1, when the call is originated locally. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.3.1.1 |
||||||||||||||||||||||||||||||
|
x25CallSrcLinkAddr
mandatory
The (MAC-)address of the link, the call comes from (if any)
|
OctetString | .1.3.6.1.4.1.272.4.6.3.1.2 |
||||||||||||||||||||||||||||||
|
x25CallSrcVCNumber
mandatory
The virtual curcuit number of the call on the link, the
call comes from. |
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.272.4.6.3.1.3 |
||||||||||||||||||||||||||||||
|
x25CallDstIfIndex
mandatory
The interface index of the link, the call leads to. This
object contains the value 1, when the link is terminated locally. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.3.1.4 |
||||||||||||||||||||||||||||||
|
x25CallDstLinkAddr
mandatory
The (MAC-)address of the link, the call leads to.
|
OctetString | .1.3.6.1.4.1.272.4.6.3.1.5 |
||||||||||||||||||||||||||||||
|
x25CallDstVCNumber
mandatory
The virtual curcuit number of the call on the target link.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.272.4.6.3.1.6 |
||||||||||||||||||||||||||||||
|
x25CallSrcAddr
mandatory
The calling address of the call as received on the source
link. |
.1.3.6.1.4.1.272.4.6.3.1.7 |
|||||||||||||||||||||||||||||||
|
x25CallDstAddr
mandatory
The called address of the call as received on the source
link. |
.1.3.6.1.4.1.272.4.6.3.1.8 |
|||||||||||||||||||||||||||||||
|
x25CallProtocolId
mandatory
The protocol id (the first four byte of the call user data)
of the call as received from the source link. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.3.1.9 |
||||||||||||||||||||||||||||||
|
x25CallFacilities
mandatory
The facilities of the call as received from the source
link. |
OctetString | .1.3.6.1.4.1.272.4.6.3.1.10 |
||||||||||||||||||||||||||||||
|
x25CallUserData
mandatory
The user data (whithout the protocol id) of the call as
received from the source link. |
.1.3.6.1.4.1.272.4.6.3.1.11 |
|||||||||||||||||||||||||||||||
|
x25CallAge
mandatory
The age of the call since received from the source link.
|
RFC1155-SMITimeTicks Textual Convention: RFC1155-SMITimeTicks Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.3.1.12 |
||||||||||||||||||||||||||||||
|
x25CallState
mandatory
The current state of the call. A call may be cleared manually
by setting this object to the value delete. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.3.1.13 |
||||||||||||||||||||||||||||||
|
x25CallInPktSize
mandatory
The packet size of packets being received by the caller,
as negotiated by the negotiation procedure. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.3.1.14 |
||||||||||||||||||||||||||||||
|
x25CallOutPktSize
mandatory
The packet size of packets being sent by the caller,
as negotiated by the negotiation procedure. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.3.1.15 |
||||||||||||||||||||||||||||||
|
x25CallInWinSize
mandatory
The window size of packets being received by the caller,
as negotiated by the negotiation procedure. |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.3.1.16 |
||||||||||||||||||||||||||||||
|
x25CallOutWinSize
mandatory
The window size of packets being sent by the caller,
as negotiated by the negotiation procedure. |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.3.1.17 |
||||||||||||||||||||||||||||||
|
x25CallPktsSent
mandatory
The number of all layer 3 packets (including RR/RNR/REJ)
sent by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.3.1.18 |
||||||||||||||||||||||||||||||
|
x25CallBytesSent
mandatory
The number of data bytes sent in DATA and INTERRUPT
packets by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.3.1.19 |
||||||||||||||||||||||||||||||
|
x25CallPktsRecvd
mandatory
The number of all layer 3 packets (including RR/RNR/REJ)
received by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.3.1.20 |
||||||||||||||||||||||||||||||
|
x25CallBytesRecvd
mandatory
The number of data bytes received in DATA and INTERRUPT
packets by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.3.1.21 |
.1.3.6.1.4.1.272.4.6.4
·
1 row entry
·
23 columns
This table provides call information for the last 10 calls after they have been cleared. Active call are not contained in the x25CallHistoryTable.
Entries are created automatically, when a call is cleared
completely. The first entry is deleted automatcally, if a
new entry would be the 11th entry in the table.
completely. The first entry is deleted automatcally, if a
new entry would be the 11th entry in the table.
Indexes
x25CallHistorySrcIfIndex x25CallHistoryDstIfIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25CallHistoryTime
mandatory
Date and time, when the call was received.
|
.1.3.6.1.4.1.272.4.6.4.1.1 |
|||||||||||||||||||||||||||||||
|
x25CallHistoryDuration
mandatory
Duration of the call in seconds.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.4.1.2 |
||||||||||||||||||||||||||||||
|
x25CallHistorySrcIfIndex
mandatory
Interface index of the link, the call came from.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.4.1.3 |
||||||||||||||||||||||||||||||
|
x25CallHistorySrcLinkAddr
mandatory
(MAC-)address of the link, the call came from.
|
OctetString | .1.3.6.1.4.1.272.4.6.4.1.4 |
||||||||||||||||||||||||||||||
|
x25CallHistorySrcVCNumber
mandatory
Virtual Curcuit Number on the link, the call came from.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.272.4.6.4.1.5 |
||||||||||||||||||||||||||||||
|
x25CallHistoryDstIfIndex
mandatory
Interface index of the link, the call leads to.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.4.1.6 |
||||||||||||||||||||||||||||||
|
x25CallHistoryDstLinkAddr
mandatory
(MAC-)address of the link, the call leads to.
|
OctetString | .1.3.6.1.4.1.272.4.6.4.1.7 |
||||||||||||||||||||||||||||||
|
x25CallHistoryDstVCNumber
mandatory
Virtual Curcuit Number on the link, the call leads to.
|
Integer32 Constraints: range: 1-4095 |
.1.3.6.1.4.1.272.4.6.4.1.8 |
||||||||||||||||||||||||||||||
|
x25CallHistorySrcAddr
mandatory
The calling party number as received from the source link.
|
.1.3.6.1.4.1.272.4.6.4.1.9 |
|||||||||||||||||||||||||||||||
|
x25CallHistoryDstAddr
mandatory
The called party number as received from the source link.
|
.1.3.6.1.4.1.272.4.6.4.1.10 |
|||||||||||||||||||||||||||||||
|
x25CallHistoryProtocolId
mandatory
The Protocol ID of the call (first four bytes of the call
user data field) as received from the source link. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.4.1.11 |
||||||||||||||||||||||||||||||
|
x25CallHistoryFacilities
mandatory
The facility field of the call as received from the
source link. |
OctetString | .1.3.6.1.4.1.272.4.6.4.1.12 |
||||||||||||||||||||||||||||||
|
x25CallHistoryUserData
mandatory
The call user data behind the protocol ID as received
from the source link |
.1.3.6.1.4.1.272.4.6.4.1.13 |
|||||||||||||||||||||||||||||||
|
x25CallHistoryInPktSize
mandatory
The packet size of packets being received by the caller,
as negotiated by the negotiation procedure. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.4.1.14 |
||||||||||||||||||||||||||||||
|
x25CallHistoryOutPktSize
mandatory
The packet size of packets being sent by the caller,
as negotiated by the negotiation procedure. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.4.1.15 |
||||||||||||||||||||||||||||||
|
x25CallHistoryInWinSize
mandatory
The window size of packets being received by the caller,
as negotiated by the negotiation procedure. |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.4.1.16 |
||||||||||||||||||||||||||||||
|
x25CallHistoryOutWinSize
mandatory
The window size of packets being sent by the caller,
as negotiated by the negotiation procedure. |
Integer32 Constraints: range: 1-127 |
.1.3.6.1.4.1.272.4.6.4.1.17 |
||||||||||||||||||||||||||||||
|
x25CallHistoryPktsSent
mandatory
The number of all layer 3 packets (including RR/RNR/REJ)
sent by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.4.1.18 |
||||||||||||||||||||||||||||||
|
x25CallHistoryBytesSent
mandatory
The number of data bytes sent in DATA and INTERRUPT
packets by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.4.1.19 |
||||||||||||||||||||||||||||||
|
x25CallHistoryPktsRecvd
mandatory
The number of all layer 3 packets (including RR/RNR/REJ)
received by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.4.1.20 |
||||||||||||||||||||||||||||||
|
x25CallHistoryBytesRecvd
mandatory
The number of data bytes received in DATA and INTERRUPT
packets by the caller. |
RFC1155-SMICounter Textual Convention: RFC1155-SMICounter Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.272.4.6.4.1.21 |
||||||||||||||||||||||||||||||
|
x25CallHistoryClearCause
mandatory
The clearing cause of the call as received in the first
clear packet. A value of -1 means, no cause was received. |
Integer32 Constraints: range: -1-255 |
.1.3.6.1.4.1.272.4.6.4.1.22 |
||||||||||||||||||||||||||||||
|
x25CallHistoryClearDiag
mandatory
The clearing diagnostics of the call as received in the first
clear packet. A value of -1 means, no diagnostics was received. |
Integer32 Constraints: range: -1-255 |
.1.3.6.1.4.1.272.4.6.4.1.23 |
.1.3.6.1.4.1.272.4.6.5
·
1 row entry
·
19 columns
The X.25 Routing Table specifies the target link for different call parameters. For each incoming call the route table will be searched for a matching entry. If multiple entries match the call parameters, a metric defines which of them to use. A route is only used, if the state of the target interface is up or dormant (see mib2). Also the state of the link is used to determine wether to use the route or not. With this mechanism, a rerouting scheme can be implemented.
Entries can only be created and deleted manually.
Indexes
x25RtSrcIfIndex x25RtDstIfIndex
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25RtSrcIfIndex
mandatory
The originating interface index of the call. If this object
is set to zero, the originating interface index will not be checked for the matching process. If this field is set to one, the route is only valid for call or… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.5.1.1 |
||||||||||
|
x25RtSrcLinkAddr
mandatory
The originating (MAC-)address of the call. If this object
is a zero length string, the originating address will not be checked for the matching process. |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.5.1.2 |
||||||||||
|
x25RtDstIfIndex
mandatory
The interface index the call has to be sent to. If this
value is set to one, the call will be used locally. If the value is set to zero, the call will be refused. The routing entry will only be used if the destination i… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.5.1.3 |
||||||||||
|
x25RtDstLinkAddr
mandatory
The (MAC-)address of the station, the call has to be sent
to. This object is ignored for point-to-point interfaces. |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.5.1.4 |
||||||||||
|
x25RtDstLinkAddrMode
mandatory
This object specifies the way, the destination link address
is generated. Default will use the default method for the target interface. When direct is selected, the destination address is taken from the route entry. Set… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.5.1.5 |
||||||||||
|
x25RtSrcAddr
mandatory
The source X.121 address in the X25 call packet. If empty, the
source address will not be matched. Extended Adresses are indicated by a leading '@'. The wildcards '*', '?', '[', ']', '{', '}' may be used. |
r/w | .1.3.6.1.4.1.272.4.6.5.1.6 |
||||||||||
|
x25RtSrcNSAP
mandatory
The source NSAP in the X25 call packet. If empty, the
source NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a 'N' if the NSAP is in a not OSI compatible format. The wildc… |
r/w | .1.3.6.1.4.1.272.4.6.5.1.7 |
||||||||||
|
x25RtDstAddr
mandatory
The target X.121 address in the X25 call packet. If empty, the
target address will not be matched. Extended Adresses are indicated by a leading '@'. The wildcards '*', '?', '[', ']', '{', '}' may be used. |
r/w | .1.3.6.1.4.1.272.4.6.5.1.8 |
||||||||||
|
x25RtDstNSAP
mandatory
The target NSAP in the X25 call packet. If empty, the
target NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a 'N' if the NSAP is in a not OSI compatible format. The wildc… |
r/w | .1.3.6.1.4.1.272.4.6.5.1.9 |
||||||||||
|
x25RtProtocolId
mandatory
The protocol id of the X25 call packet. The protocol id
will not be used for the matching process, when this object is set to -1 |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.5.1.10 |
||||||||||
|
x25RtCallUserData
mandatory
The call user data field of the X25 call packet behind the
protocol id. If empty, the call user data field will not be used for matching. |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.5.1.11 |
||||||||||
|
x25RtRPOA
mandatory
This object will be compared to the first value in the
list of RPOAs in the X25 call packet, if not set to -1. |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.272.4.6.5.1.12 |
||||||||||
|
x25RtNUI
mandatory
This object will be compared to the NUI facility supplied
with the call. If this object is an empty string, the NUI facility will not be used for the matching process. |
r/w | .1.3.6.1.4.1.272.4.6.5.1.13 |
||||||||||
|
x25RtRewritingRule
mandatory
This Object specifies a rewriting rule in the X25 Rewriting
Rule table. The call packed will be processed according to this rewriting rule before the call is being delivered. If this value is set to zero, no rewriting w… |
Integer32r/w Constraints: range: 0-999999 |
.1.3.6.1.4.1.272.4.6.5.1.14 |
||||||||||
|
x25RtMetric
mandatory
This object specifies a metric similar to the metric of an
IP routing entry. If a call matches multiple entries in the X25 routing table, the routing entry with the lowest value of Metric will be used to route the call. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.6.5.1.15 |
||||||||||
|
x25RtCug
mandatory
This object will be compared to the CUG facility supplied
with the call, if not set to -1. |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.272.4.6.5.1.16 |
||||||||||
|
x25RtCugOutgoing
mandatory
This object will be compared to the Outgoing CUG facility
supplied with the call, if not set to -1. |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.272.4.6.5.1.17 |
||||||||||
|
x25RtCugBilateral
mandatory
This object will be compared to the Bilateral CUG facility
supplied with the call, if not set to -1. |
Integer32r/w Constraints: range: -1-9999 |
.1.3.6.1.4.1.272.4.6.5.1.18 |
||||||||||
|
x25RtDstLinkAddrRule
mandatory
If x25RtDstLinkAddrMode is set to rule this object describes,
how to develop the destination link address (may be ISDN call number, MAC address or IP address) from destination X.25 address or destination X.25 NSAP. |
r/w | .1.3.6.1.4.1.272.4.6.5.1.19 |
.1.3.6.1.4.1.272.4.6.6
·
1 row entry
·
19 columns
This Table contains entries, that describe different rules of rewriting the call parameters before delivering a call. Which entry in this table is used, will be determined by the route table.
Indexes
x25RwRewritingRule
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
x25RwRewritingRule
mandatory
The unique number of the rewriting rule.
|
Integer32r/w Constraints: range: 1-999999 |
.1.3.6.1.4.1.272.4.6.6.1.1 |
||||||||
|
x25RwReverseCharging
mandatory
This object describes what to do with the reverse charging
facility. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.6.1.2 |
||||||||
|
x25RwRPOA
mandatory
This object describes what to do with the rpoa facility.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.6.1.3 |
||||||||
|
x25RwNUI
mandatory
This object contains the new value of the NUI facility.
If this object is an empty string, the NUI facility will not be changed. |
r/w | .1.3.6.1.4.1.272.4.6.6.1.4 |
||||||||
|
x25RwSrcAddr
mandatory
Specifies how to rewrite the source address. Digits
will be set directly to the new address. A '.' will move a digit from the old address to the new address. A '*' will move all remaining digits from the old address to … |
r/w | .1.3.6.1.4.1.272.4.6.6.1.5 |
||||||||
|
x25RwSrcNSAP
mandatory
Specifies how to rewrite the source NSAP. Digits
will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' will move all remaining digits from the old NSAP to the new NSAP. A… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.6 |
||||||||
|
x25RwDstAddr
mandatory
Specifies how to rewrite the destination address. Digits
will be set directly to the new address. A '.' will move a digit from the old address to the new address. A '*' will move all remaining digits from the old addres… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.7 |
||||||||
|
x25RwDstNSAP
mandatory
Specifies how to rewrite the destination NSAP. Digits
will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' will move all remaining digits from the old NSAP to the new NS… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.8 |
||||||||
|
x25RwProtocolId
mandatory
This object specifies the new value of the protocol id field.
The protocol id field will not be changed, if this object is set to -1 |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.6.1.9 |
||||||||
|
x25RwCallUserData
mandatory
The new value of the call user data field. The call user data
field will not be changed, if this object is an empty string. A leading '%' will be ignored. This allows to delete the call user data portion of a call packe… |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.6.1.10 |
||||||||
|
x25RwRespSrcAddr
mandatory
Specifies how to rewrite the source address of the call
accepted packet. Digits will be set directly to the new address. A '.' will move a digit from the old address to the new address. A '*' will move all remaining di… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.11 |
||||||||
|
x25RwRespSrcNSAP
mandatory
Specifies how to rewrite the source NSAP in the call
accepted packet. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' will move all remaining digits from th… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.12 |
||||||||
|
x25RwRespDstAddr
mandatory
Specifies how to rewrite the destination address of the call
accepted packet. Digits will be set directly to the new address. A '.' will move a digit from the old address to the new address. A '*' will move all remaini… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.13 |
||||||||
|
x25RwRespDstNSAP
mandatory
Specifies how to rewrite the destination NSAP in the call
accepted packet. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' will move all remaining digits fr… |
r/w | .1.3.6.1.4.1.272.4.6.6.1.14 |
||||||||
|
x25RwRespProtocolId
mandatory
This object contains the new value of the ProtocolID field
of the call accepted packet. The ProtocolID will not be changed, if this object is set to -1. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.6.1.15 |
||||||||
|
x25RwRespCallUserData
mandatory
The new value of the call user data field of the call
accepted packet. The call user data field will not be changed, if this object is an empty string. A leading '%' will be ignored. This allows to delete the call user … |
OctetStringr/w | .1.3.6.1.4.1.272.4.6.6.1.16 |
||||||||
|
x25RwCug
mandatory
This object contains the new value of the CUG facility.
If this object is set to -1, the CUG facility will not be changed. The CUG facility will be removed, if this object is set to -2. |
Integer32r/w Constraints: range: -2-9999 |
.1.3.6.1.4.1.272.4.6.6.1.17 |
||||||||
|
x25RwCugOutgoing
mandatory
This object contains the new value of the Outgoing CUG
facility. If this object is set to -1, the Outgoing CUG facility will not be changed. The Outgoing CUG facility will be removed, if this object is set to -2. |
Integer32r/w Constraints: range: -2-9999 |
.1.3.6.1.4.1.272.4.6.6.1.18 |
||||||||
|
x25RwCugBilateral
mandatory
This object contains the new value of the Bilateral CUG
facility. If this object is set to -1, the Bilateral CUG facility will not be changed. The Bilateral CUG facility will be removed, if this object is set to -2. |
Integer32r/w Constraints: range: -2-9999 |
.1.3.6.1.4.1.272.4.6.6.1.19 |
.1.3.6.1.4.1.272.4.6.7
·
1 row entry
·
15 columns
This table contains an entry for each partner reachable
via X.25 for Multiprotocol over X.25 according to RFC 1356.
Entries in this table are created manually and will result
to the creation of a multiprotocol routing interface in
the ifTable. This interface can than be used by higher
level protocols like ip, ipx and bridging.
The object x25MprIfIndex shall be set to 0 for creation
of new entries. The BRICK will allocate the next free
interface index and assign it ti x25MprIfIndex.
Rows of this table can be deleted by setting the object
x25MprEncapsulation to the value delete.
Indexes
x25MprIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
x25MprIfIndex
mandatory
This object contains an interface index and assigns the
row to an entry in ifTable. When creating new entries in the table, the value of this object shall be set to 0. The next free ifIndex value is than allocated by th… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.7.1.1 |
||||||||||||
|
x25MprMtu
mandatory
The Maximum transfer unit to be used with the interface,
the row is describing. |
Integer32r/w Constraints: range: 576-8180 |
.1.3.6.1.4.1.272.4.6.7.1.2 |
||||||||||||
|
x25MprEncapsulation
mandatory
This object specifies the encapsulation method to be used.
If this object is set to ip_rfc877, the RFC877 compatible encapsulation is selected. The relating interface is only capabable of transferring IP … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.7.1.3 |
||||||||||||
|
x25MprNumVC
mandatory
This object specifies the number of VCs used with the
corresponding interface. The BRICK will always try to have that many VCs available for the relating interface. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.6.7.1.4 |
||||||||||||
|
x25MprMaxVC
mandatory
This object specifies the maximum number of VCs used
with the corresponding interface. It shall be greater or equal to x25MprNumVC. |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.272.4.6.7.1.5 |
||||||||||||
|
x25MprWinSize
mandatory
This object describes the window size to be
used for outgoing X.25 virtual calls. |
Integer32r/w Constraints: range: 1-7 |
.1.3.6.1.4.1.272.4.6.7.1.6 |
||||||||||||
|
x25MprPktSize
mandatory
This object describes the packet size, to be used for
outgoing X.25 calls. Please note that this parameter is independant of the x25MprMtu parameter. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.7.1.7 |
||||||||||||
|
x25MprShortHold
mandatory
This object specifies the time of inactivity in seconds,
after which the VCs are disconnected automatically. |
Integer32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.272.4.6.7.1.8 |
||||||||||||
|
x25MprMaxRetries
mandatory
This object specifies the maximum number of tries for
X.25 call establishement. If the BRICK has tried to establish the call for this many times, the interface is in the blocked state for a time specified by x25MprBlock… |
Integer32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.272.4.6.7.1.9 |
||||||||||||
|
x25MprBlockTime
mandatory
This object describes the amount of time, the corresponding
interface remains in the blocked state after too many tries to establish the X.25 call. |
Integer32r/w Constraints: range: 0-65536 |
.1.3.6.1.4.1.272.4.6.7.1.10 |
||||||||||||
|
x25MprAddr
mandatory
The X.25 address to be used with this interface. A leading
@ indicates extended adressing. |
r/w | .1.3.6.1.4.1.272.4.6.7.1.11 |
||||||||||||
|
x25MprMode
mandatory
This object describes the operating mode of the interface.
normal -- normal operating mode multiuser -- A new interface is created for each incoming X.25 call. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.7.1.12 |
||||||||||||
|
x25MprAutoRoute
mandatory
This object describes, how automatic routes are created.
It is especially usefull combined with the multiuser Mode of the interface. off -- do not create automatic routes check -- Check the source addr… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.7.1.13 |
||||||||||||
|
x25MprIpSubnet
mandatory
This object specifies, together with x25MprSubnetMask
the possible range for automatically created routes. The object is valid, when x25MprMode is set to autoroute or multiuser. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.272.4.6.7.1.14 |
||||||||||||
|
x25MprIpSubnetMask
mandatory
This object specifies, together with x25MprSubnet
the possible range for automatically created routes. The object is valid, when x25MprMode is set to autoroute or multiuser. |
RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.272.4.6.7.1.15 |
.1.3.6.1.4.1.272.4.6.15
·
1 row entry
·
23 columns
This table contains an entry for each Interface
accessible to the X.25 Switch for X.25 over ISDN
B-channel data transfer. This mechanism superseeds
the old one using the PPP implementation as ISDN
call generator. The relationship to ISDN is much more
direct and offers more possibilities.
For each entry in this table, there is a corresponding
Table in the ifTable of mib-2.
Indexes
xoiIfIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
xoiIfIndex
mandatory
This object contains the interface index for the
interface. When this object is set to an interface number, that does not yet correspond to an existing interface, a new interface is created. The interface index is force… |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.1 |
||||||||||||||||||||||||||||||
|
xoiIfType
mandatory
This object specifies the type of the interface and can
also be used to delete the complete row and the corresponding interface. The following types are available: one-to-one Each X.25 Call sent to the in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.2 |
||||||||||||||||||||||||||||||
|
xoiIfDirection
mandatory
This object specifies the allowd direction of ISDN calls.
The value none can be used to disable an interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.3 |
||||||||||||||||||||||||||||||
|
xoiIfLocalNumber
mandatory
This object specifies the local ISDN number.
For outgoing calls, it is used as calling party number, unless it is overwritten by the X.25 routing mechanisms. For incoming calls it is used t… |
r/w | .1.3.6.1.4.1.272.4.6.15.1.4 |
||||||||||||||||||||||||||||||
|
xoiIfRemoteNumber
mandatory
This object specifies the remote ISDN number.
For outgoing ISDN calls, it is used as called party number, unless it is overwritten by X.25 routing mechanisms. For incoming calls it is used … |
r/w | .1.3.6.1.4.1.272.4.6.15.1.5 |
||||||||||||||||||||||||||||||
|
xoiIfStkMask
mandatory
This object specifies the ISDN stacks to be used for incoming
and outgoing ISDN calls. If none of the specified stacks is ready for use, the ifOperStatus in the corresponding entry of the ifTable is set to down. |
r/w | .1.3.6.1.4.1.272.4.6.15.1.6 |
||||||||||||||||||||||||||||||
|
xoiIfSignalling
mandatory
This object sets the signalling for outgoing calls and is used
assign incoming calls to interfaces. If set to 0, an ISDN signalling is generated automatically for outgoing calls depending on the values of L1Protocol and… |
r/w | .1.3.6.1.4.1.272.4.6.15.1.7 |
||||||||||||||||||||||||||||||
|
xoiIfL1Protocol
mandatory
This object specifies the layer 1 protocol for the interface.
The specified mode is used for incoming and outgoing calls. If auto is selected, the layer 1 protocol will be derived from ISDN signalling for… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.8 |
||||||||||||||||||||||||||||||
|
xoiIfL2Protocol
mandatory
This object specifies the layer 2 protocol of the interface.
The setting applies to incoming and outgoing calls. When auto is selected, the layer 2 protocol is derived from the signalling of the call for … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.9 |
||||||||||||||||||||||||||||||
|
xoiIfPadProfile
mandatory
In case of a PAD instance being used (see Layer2Mode), this
object specifies the PAD profile to be used. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.10 |
||||||||||||||||||||||||||||||
|
xoiIfModemProfile
mandatory
In case of a modem being used for layer 1, this object specifies
the modem profile. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.11 |
||||||||||||||||||||||||||||||
|
xoiIfMaxCalls
mandatory
This object specifies the maximum number of calls for the
interface. |
Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.12 |
||||||||||||||||||||||||||||||
|
xoiIfL2Mode
mandatory
This object specifies whether the layer2 should act in
DTE or DCE configuration. If set to auto. The ISDN caller is always DTE, and the callee is DCE. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.13 |
||||||||||||||||||||||||||||||
|
xoiIfStatCommand
mandatory
This object may be used, to clear the statistics counters
for the interface. When set to clear, all statistics counters in this table and the ifTable are set to 0. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.272.4.6.15.1.14 |
||||||||||||||||||||||||||||||
|
xoiIfMaxRetries
mandatory
This object specifies the number of times, an unsuccessful
call has to be retried. When even after this many times, it was not possible, to establish an ISDN connection, the original X.25 call is cleared. In addition to… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.272.4.6.15.1.15 |
||||||||||||||||||||||||||||||
|
xoiIfRetryTime
mandatory
This object specifies the amount of time in seconds, to
wait between the retries of an ISDN call. If the value is negative, a random time will be chosen between 0 and the the absolute value. |
Integer32r/w Constraints: range: -3600-3600 |
.1.3.6.1.4.1.272.4.6.15.1.16 |
||||||||||||||||||||||||||||||
|
xoiIfBlockTime
mandatory
This object specifies the amount of time in seconds, the
interface will stay in the BLOCKED state after unsuccessful ISDN call establishment. |
Integer32r/w Constraints: range: 0-3600 |
.1.3.6.1.4.1.272.4.6.15.1.17 |
||||||||||||||||||||||||||||||
|
xoiIfCurrentCalls
mandatory
This object indicates the number of currently established
calls for the interface. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.20 |
||||||||||||||||||||||||||||||
|
xoiIfIncomingCalls
mandatory
This object is a statistics counter. It counts the number of
incoming calls for the interface. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.21 |
||||||||||||||||||||||||||||||
|
xoiIfOutgoingCalls
mandatory
This object is a statistics counter. It counts the number of
outgoing calls for the interface. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.22 |
||||||||||||||||||||||||||||||
|
xoiIfMaxConcCalls
mandatory
This object is a statistics counter. It indicates the maximum
number of calls being active concurrently. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.23 |
||||||||||||||||||||||||||||||
|
xoiIfCumulTime
mandatory
This object is a statistics counter. It cumulates the connection
time of all calls assigned to the interface. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.272.4.6.15.1.24 |
||||||||||||||||||||||||||||||
|
xoiIfBrkSeqVar
mandatory
This object indicates the additional number of startbits to detect
a break sequence send from V.110 terminal over an S2M interface. The default number of startbits is 22, you can vary this value in range from 12 to 32,… |
Integer32r/w Constraints: range: -10-10 |
.1.3.6.1.4.1.272.4.6.15.1.25 |