x25LkPrDefPktSize
BIANCA-BRICK-X25-MIB ·
.1.3.6.1.4.1.272.4.6.2.1.11
Object
column
mandatory
r/w
Enumeration
The Layer 3 packet size for this link.
Context
- MIB
- BIANCA-BRICK-X25-MIB
- OID
.1.3.6.1.4.1.272.4.6.2.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- x25LinkPresetEntry
- Table
- x25LinkPresetTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
7 | p128 |
8 | p256 |
9 | p512 |
10 | p1024 |
11 | p2048 |
12 | p4096 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25LkPrIfIndex mandatory The interface index of the link to be predefined. This
object identifies a row in the ifTable. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.1 |
| x25LkPrHOC mandatory Highest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no outgoing channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.10 |
| x25LkPrDefWinSize mandatory The default window size. This must be less than 8, if the
layer 3 is operated in modulo 8 mode. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.12 |
| x25LkPrMaxPktSize mandatory The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of … | column | Enumeration | .1.3.6.1.4.1.272.4.6.2.1.13 |
| x25LkPrMaxWinSize mandatory The maximum allowable window size for this link during
window size negotiation. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.14 |
| x25LkPrL2WinSize mandatory The layer 2 window size for this link. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.15 |
| x25LkPrL2RetrTimer mandatory The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within
this timeout, it will be retransmitted. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.16 |
| x25LkPrL2RetrCounter mandatory The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated
by this object, the link will be reset or disconnected. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.17 |
| x25LkPrL2SupervTimer mandatory The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the
link gets idle. An RR poll-sequence will be initiated,
when this timeout… | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.18 |
| x25LkPrL2IdleTimer mandatory The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been
idle for the time specified by this object, the link
will be disco… | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.19 |
| x25LkPrAddr mandatory On point-to-point links, this field must be empty. On
point-to-multipoint links, this field may be empty or
set to a partners (MAC-) address. In the first case, the
definition is … | column | OctetString | .1.3.6.1.4.1.272.4.6.2.1.2 |
| x25LkPrNegotiation mandatory This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to
never, outgoing calls are cleared if the call parameters
dif… | column | Enumeration | .1.3.6.1.4.1.272.4.6.2.1.20 |
| x25LkPrRestDelayTimer mandatory The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is estab… | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.23 |
| x25LkPrVC0 mandatory This object indicates, whether VC#0 shall be allowed on
the link. If this object is set to enable, VC#0 is allowed
and the value -1 shall be used to indicate the absence of
specif… | column | Enumeration | .1.3.6.1.4.1.272.4.6.2.1.24 |
| x25LkPrRewritingRule mandatory This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value … | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.25 |
| x25LkPrMode mandatory This field indicates, whether the link is initially operated
in DTE or DCE mode. If a misconfiguration is detected,
(DTE<->DTE od DCE<->DCE) the DTE/DCE assignement is done
be mea… | column | Enumeration | .1.3.6.1.4.1.272.4.6.2.1.3 |
| x25LkPrModulo mandatory This object indicates, whether the link should be operated
in modulo 8 or modulo 128 mode. | column | Enumeration | .1.3.6.1.4.1.272.4.6.2.1.4 |
| x25LkPrLIC mandatory Lowest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no incoming channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.5 |
| x25LkPrHIC mandatory Highest Incoming Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no incoming channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.6 |
| x25LkPrLTC mandatory Lowest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no twoway channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.7 |
| x25LkPrHTC mandatory Highest Twoway Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no twoway channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.8 |
| x25LkPrLOC mandatory Lowest Outgoing Channel as seen from the DTE. Depending
on the value of x25LkPrVC0, the value of -1 or Zero means
no outgoing channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.2.1.9 |