x25LkRewritingRule

BIANCA-BRICK-X25-MIB · .1.3.6.1.4.1.272.4.6.1.1.25
MIB view Table view

Object

column mandatory Integer32 
This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value is set to zero, no rewriting will take
place.

Context

MIB
BIANCA-BRICK-X25-MIB
OID
.1.3.6.1.4.1.272.4.6.1.1.25
Type
column
Access
readonly
Status
mandatory
Parent
x25LinkEntry
Table
x25LinkTable
Siblings
27

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-999999

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
x25LkIfIndex mandatory
The index of the interface the link is running on. See ifTable.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.1
x25LkHOC mandatory
Highest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.10
x25LkDefPktSize mandatory
The default layer 3 packet size for this link.
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.11
x25LkDefWinSize mandatory
The default window size. This is always less than 8, if the layer 3 is operated in modulo 8 mode.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.12
x25LkMaxPktSize mandatory
The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of…
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.13
x25LkMaxWinSize mandatory
The maximum allowable window size for this link during window size negotiation.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.14
x25LkL2WinSize mandatory
The layer 2 window size for this link.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.15
x25LkL2RetrTimer mandatory
The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.16
x25LkL2RetrCounter mandatory
The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this object, the link will be reset or disconnected,
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.17
x25LkL2SupervTimer mandatory
The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiated, when this timeout…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.18
x25LkL2IdleTimer mandatory
The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the time specified by this object, the link will be disco…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.19
x25LkAddr mandatory
On point-to-multipoint interfaces, this field contains the (MAC-)address of the partner, the link is leading to. It is empty for point-to-point interfaces, because there is only o…
columnOctetString.1.3.6.1.4.1.272.4.6.1.1.2
x25LkState mandatory
This object contains the current state of the link. The link may be manually disconnected by setting this object to the value delete.
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.20
x25LkNegotiation mandatory
This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the call parameters dif…
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.21
x25LkDiscDelayTimer mandatory
The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval between receiving of layer 2 disconnect and actual …
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.22
x25LkCallDelayTimer mandatory
The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval between restart procedure completion and virtual ca…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.23
x25LkRestDelayTimer mandatory
The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is estab…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.24
x25LkL1IdleTimer mandatory
The idle timer in milliseconds for the layer 1 of this link. If layer 2 is disconnected and the time specified by this object expired, the layer 1 will be disconnected. The valu…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.26
x25LkMode mandatory
This field indicates wheter the Layer 3 on top of the link is operated in DTE or DCE mode. The difference is in the order of VC-assignment, the handling of a call collision and th…
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.3
x25LkActSabmDelayTimer mandatory
The sabm delay timer in milliseconds for this link (only dialup outgoing link). This timer specifies the time interval between establishment of layer 1 and sending of SABM packe…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.32
x25LkPsvSabmDelayTimer mandatory
The passive sabm delay timer in milliseconds for this link (only dialup incoming link). This timer specifies the time interval between establishment of layer 1 and sending of SAB…
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.33
x25LkModulo mandatory
This field indicates whether the layer 3 on top of the link is in modulo 8 or in modulo 128 mode.
columnEnumeration.1.3.6.1.4.1.272.4.6.1.1.4
x25LkLIC mandatory
Lowest Incoming Channel as seen from the DTE. The value -1 means no incoming channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.5
x25LkHIC mandatory
Highest Incoming Channel as seen from the DTE. The value -1 means no incoming channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.6
x25LkLTC mandatory
Lowest Twoway Channel as seen from the DTE. The value -1 means no twoway channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.7
x25LkHTC mandatory
Highest Twoway Channel as seen from the DTE. The value -1 means no twoway channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.8
x25LkLOC mandatory
Lowest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels.
columnInteger32.1.3.6.1.4.1.272.4.6.1.1.9