xoiIfLocalNumber
BIANCA-BRICK-X25-MIB ·
.1.3.6.1.4.1.272.4.6.15.1.4
Object
column
mandatory
r/w
This object specifies the local ISDN number.
For outgoing calls, it is used as calling party number,
unless it is overwritten by the X.25 routing mechanisms.
For incoming calls it is used to assign the incoming call
to an interface. The called party number of the incoming
ISDN call is matched against the value of this object.
Wildcards are allowed in this case.
Use care, when IfDirection is set to both. No Wildcards
are allowed for outgoing calls.
Context
- MIB
- BIANCA-BRICK-X25-MIB
- OID
.1.3.6.1.4.1.272.4.6.15.1.4- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- x25OverIsdnIfEntry
- Table
- x25OverIsdnIfTable
- Siblings
- 22
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xoiIfIndex mandatory This object contains the interface index for the
interface. When this object is set to an interface
number, that does not yet correspond to an existing
interface, a new interface … | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.1 |
| xoiIfPadProfile mandatory In case of a PAD instance being used (see Layer2Mode), this
object specifies the PAD profile to be used. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.10 |
| xoiIfModemProfile mandatory In case of a modem being used for layer 1, this object specifies
the modem profile. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.11 |
| xoiIfMaxCalls mandatory This object specifies the maximum number of calls for the
interface. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.12 |
| xoiIfL2Mode mandatory This object specifies whether the layer2 should act in
DTE or DCE configuration. If set to auto. The ISDN caller
is always DTE, and the callee is DCE. | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.13 |
| xoiIfStatCommand mandatory This object may be used, to clear the statistics counters
for the interface. When set to clear, all statistics counters
in this table and the ifTable are set to 0. | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.14 |
| xoiIfMaxRetries mandatory This object specifies the number of times, an unsuccessful
call has to be retried. When even after this many times,
it was not possible, to establish an ISDN connection, the
origi… | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.15 |
| xoiIfRetryTime mandatory This object specifies the amount of time in seconds, to
wait between the retries of an ISDN call. If the value is
negative, a random time will be chosen between 0 and the
the abso… | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.16 |
| xoiIfBlockTime mandatory This object specifies the amount of time in seconds, the
interface will stay in the BLOCKED state after unsuccessful
ISDN call establishment. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.17 |
| xoiIfType mandatory This object specifies the type of the interface and can
also be used to delete the complete row and the corresponding
interface. The following types are available:
… | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.2 |
| xoiIfCurrentCalls mandatory This object indicates the number of currently established
calls for the interface. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.20 |
| xoiIfIncomingCalls mandatory This object is a statistics counter. It counts the number of
incoming calls for the interface. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.21 |
| xoiIfOutgoingCalls mandatory This object is a statistics counter. It counts the number of
outgoing calls for the interface. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.22 |
| xoiIfMaxConcCalls mandatory This object is a statistics counter. It indicates the maximum
number of calls being active concurrently. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.23 |
| xoiIfCumulTime mandatory This object is a statistics counter. It cumulates the connection
time of all calls assigned to the interface. | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.24 |
| xoiIfBrkSeqVar mandatory This object indicates the additional number of startbits to detect
a break sequence send from V.110 terminal over an S2M interface.
The default number of startbits is 22, you can … | column | Integer32 | .1.3.6.1.4.1.272.4.6.15.1.25 |
| xoiIfDirection mandatory This object specifies the allowd direction of ISDN calls.
The value none can be used to disable an interface. | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.3 |
| xoiIfRemoteNumber mandatory This object specifies the remote ISDN number.
For outgoing ISDN calls, it is used as called party number,
unless it is overwritten by X.25 routing mechanisms.
… | column | - | .1.3.6.1.4.1.272.4.6.15.1.5 |
| xoiIfStkMask mandatory This object specifies the ISDN stacks to be used for incoming
and outgoing ISDN calls. If none of the specified stacks is
ready for use, the ifOperStatus in the corresponding entr… | column | - | .1.3.6.1.4.1.272.4.6.15.1.6 |
| xoiIfSignalling mandatory This object sets the signalling for outgoing calls and is used
assign incoming calls to interfaces. If set to 0, an ISDN
signalling is generated automatically for outgoing calls
d… | column | - | .1.3.6.1.4.1.272.4.6.15.1.7 |
| xoiIfL1Protocol mandatory This object specifies the layer 1 protocol for the interface.
The specified mode is used for incoming and outgoing calls.
If auto is selected, the layer 1 protocol … | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.8 |
| xoiIfL2Protocol mandatory This object specifies the layer 2 protocol of the interface.
The setting applies to incoming and outgoing calls.
When auto is selected, the layer 2 protocol is deri… | column | Enumeration | .1.3.6.1.4.1.272.4.6.15.1.9 |