x25LkCallDelayTimer
BIANCA-BRICK-X25-MIB ·
.1.3.6.1.4.1.272.4.6.1.1.23
Object
column
mandatory
Integer32
The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval between restart procedure completion and virtual call setup. If restart procedure is completed and the time specified by this object expired, call packet will be sent. The value 0 means, call packet should be sent immediately after completion of restart procedure.
Context
- MIB
- BIANCA-BRICK-X25-MIB
- OID
.1.3.6.1.4.1.272.4.6.1.1.23- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- x25LinkEntry
- Table
- x25LinkTable
- Siblings
- 27
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-30000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25LkIfIndex mandatory The index of the interface the link is running on.
See ifTable. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.1 |
| x25LkHOC mandatory Highest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.10 |
| x25LkDefPktSize mandatory The default layer 3 packet size for this link. | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.11 |
| x25LkDefWinSize mandatory The default window size. This is always less than 8, if the
layer 3 is operated in modulo 8 mode. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.12 |
| x25LkMaxPktSize mandatory The maximum allowable packet size for this link during
X.25 packet size negotiation. If this field is set to
unrestricted, the packet size will only be limited by
the Mtu size of… | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.13 |
| x25LkMaxWinSize mandatory The maximum allowable window size for this link during
window size negotiation. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.14 |
| x25LkL2WinSize mandatory The layer 2 window size for this link. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.15 |
| x25LkL2RetrTimer mandatory The retransmission timeout in milliseconds for the
layer 2 of this link. If a frame is not acknowledged within
this timeout, it will be retransmitted. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.16 |
| x25LkL2RetrCounter mandatory The retransmission counter for the layer 2 of this link.
If a frame has been retransmitted more often than indicated
by this object, the link will be reset or disconnected, | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.17 |
| x25LkL2SupervTimer mandatory The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the
link gets idle. An RR poll-sequence will be initiated,
when this timeout… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.18 |
| x25LkL2IdleTimer mandatory The idle timer in milliseconds for the layer 2 of this
link. If no VCs are established and the the link has been
idle for the time specified by this object, the link
will be disco… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.19 |
| x25LkAddr mandatory On point-to-multipoint interfaces, this field contains the
(MAC-)address of the partner, the link is leading to.
It is empty for point-to-point interfaces, because there
is only o… | column | OctetString | .1.3.6.1.4.1.272.4.6.1.1.2 |
| x25LkState mandatory This object contains the current state of the link. The
link may be manually disconnected by setting this object
to the value delete. | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.20 |
| x25LkNegotiation mandatory This object determines whether packet-size and windows-size
parameters are negotiated for outgoing calls. When set to
never, outgoing calls are cleared if the call parameters
dif… | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.21 |
| x25LkDiscDelayTimer mandatory The disc delay timer in milliseconds for the layer 2 of
this link (only outgoing links). This timer specifies the
time interval between receiving of layer 2 disconnect and
actual … | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.22 |
| x25LkRestDelayTimer mandatory The Restart delay timer in milliseconds for this link.
This timer specifies the time interval between
establishment of layer 2 and sending of restart packet.
If layer 2 is estab… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.24 |
| x25LkRewritingRule mandatory This Object specifies a rewriting rule in the X25 Rewrite
table. The call packet will be processed according
to this rewriting rule before the call is being routed.
If this value … | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.25 |
| x25LkL1IdleTimer mandatory The idle timer in milliseconds for the layer 1 of this
link. If layer 2 is disconnected and the time specified
by this object expired, the layer 1 will be disconnected.
The valu… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.26 |
| x25LkMode mandatory This field indicates wheter the Layer 3 on top of the link
is operated in DTE or DCE mode. The difference is in the
order of VC-assignment, the handling of a call collision
and th… | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.3 |
| x25LkActSabmDelayTimer mandatory The sabm delay timer in milliseconds for this link (only
dialup outgoing link). This timer specifies the time interval
between establishment of layer 1 and sending of SABM packe… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.32 |
| x25LkPsvSabmDelayTimer mandatory The passive sabm delay timer in milliseconds for this
link (only dialup incoming link). This timer specifies the time
interval between establishment of layer 1 and sending of SAB… | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.33 |
| x25LkModulo mandatory This field indicates whether the layer 3 on top of the link
is in modulo 8 or in modulo 128 mode. | column | Enumeration | .1.3.6.1.4.1.272.4.6.1.1.4 |
| x25LkLIC mandatory Lowest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.5 |
| x25LkHIC mandatory Highest Incoming Channel as seen from the DTE. The value
-1 means no incoming channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.6 |
| x25LkLTC mandatory Lowest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.7 |
| x25LkHTC mandatory Highest Twoway Channel as seen from the DTE. The value
-1 means no twoway channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.8 |
| x25LkLOC mandatory Lowest Outgoing Channel as seen from the DTE. The value
-1 means no outgoing channels. | column | Integer32 | .1.3.6.1.4.1.272.4.6.1.1.9 |