x25LkL2SupervTimer

BIANCA-BRICK-X25-MIB · .1.3.6.1.4.1.272.4.6.1.1.18

Object

column mandatory Integer32

The link-supervision timeout in milliseconds for the
layer 2 of this link. This timer is started, when the
link gets idle. An RR poll-sequence will be initiated,
when this timeout expires.

Context

MIB: BIANCA-BRICK-X25-MIB
OID: .1.3.6.1.4.1.272.4.6.1.1.18
Type: column
Access: readonly
Status: mandatory
Parent: x25LinkEntry
Table: x25LinkTable
Siblings: 27

Syntax

Integer32

Values & Constraints

Object Constraints

range: 100-30000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
x25LkIfIndex mandatory The index of the interface the link is running on. See ifTable.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.1`
x25LkHOC mandatory Highest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.10`
x25LkDefPktSize mandatory The default layer 3 packet size for this link.	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.11`
x25LkDefWinSize mandatory The default window size. This is always less than 8, if the layer 3 is operated in modulo 8 mode.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.12`
x25LkMaxPktSize mandatory The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.13`
x25LkMaxWinSize mandatory The maximum allowable window size for this link during window size negotiation.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.14`
x25LkL2WinSize mandatory The layer 2 window size for this link.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.15`
x25LkL2RetrTimer mandatory The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.16`
x25LkL2RetrCounter mandatory The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this object, the link will be reset or disconnected,	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.17`
x25LkL2IdleTimer mandatory The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the time specified by this object, the link will be disco…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.19`
x25LkAddr mandatory On point-to-multipoint interfaces, this field contains the (MAC-)address of the partner, the link is leading to. It is empty for point-to-point interfaces, because there is only o…	column	OctetString	`.1.3.6.1.4.1.272.4.6.1.1.2`
x25LkState mandatory This object contains the current state of the link. The link may be manually disconnected by setting this object to the value delete.	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.20`
x25LkNegotiation mandatory This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the call parameters dif…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.21`
x25LkDiscDelayTimer mandatory The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval between receiving of layer 2 disconnect and actual …	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.22`
x25LkCallDelayTimer mandatory The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval between restart procedure completion and virtual ca…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.23`
x25LkRestDelayTimer mandatory The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is estab…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.24`
x25LkRewritingRule mandatory This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value …	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.25`
x25LkL1IdleTimer mandatory The idle timer in milliseconds for the layer 1 of this link. If layer 2 is disconnected and the time specified by this object expired, the layer 1 will be disconnected. The valu…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.26`
x25LkMode mandatory This field indicates wheter the Layer 3 on top of the link is operated in DTE or DCE mode. The difference is in the order of VC-assignment, the handling of a call collision and th…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.3`
x25LkActSabmDelayTimer mandatory The sabm delay timer in milliseconds for this link (only dialup outgoing link). This timer specifies the time interval between establishment of layer 1 and sending of SABM packe…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.32`
x25LkPsvSabmDelayTimer mandatory The passive sabm delay timer in milliseconds for this link (only dialup incoming link). This timer specifies the time interval between establishment of layer 1 and sending of SAB…	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.33`
x25LkModulo mandatory This field indicates whether the layer 3 on top of the link is in modulo 8 or in modulo 128 mode.	column	Enumeration	`.1.3.6.1.4.1.272.4.6.1.1.4`
x25LkLIC mandatory Lowest Incoming Channel as seen from the DTE. The value -1 means no incoming channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.5`
x25LkHIC mandatory Highest Incoming Channel as seen from the DTE. The value -1 means no incoming channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.6`
x25LkLTC mandatory Lowest Twoway Channel as seen from the DTE. The value -1 means no twoway channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.7`
x25LkHTC mandatory Highest Twoway Channel as seen from the DTE. The value -1 means no twoway channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.8`
x25LkLOC mandatory Lowest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.1.1.9`