x25LinkPresetEntry

BIANCA-BRICK-X25-MIB · .1.3.6.1.4.1.272.4.6.2.1

Object

row mandatory

Entries in this table are created by defining a new value
for the field x25LkPrIfIndex. Entries may be deleted by
setting the field x25LkPrMode to the value delete. Please
note, that changing the entries dont have influence
on links being already established. To take effekt the
according links have to be cleared either manually
(see x25LinkTable) or by other means.

Context

MIB: BIANCA-BRICK-X25-MIB
OID: .1.3.6.1.4.1.272.4.6.2.1
Type: row
Status: mandatory
Parent: x25LinkPresetTable
Table: x25LinkPresetTable
Children: 23

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
x25LkPrIfIndex mandatory The interface index of the link to be predefined. This object identifies a row in the ifTable.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.1`
x25LkPrHOC mandatory Highest Outgoing Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.10`
x25LkPrDefPktSize mandatory The Layer 3 packet size for this link.	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.11`
x25LkPrDefWinSize mandatory The default window size. This must be less than 8, if the layer 3 is operated in modulo 8 mode.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.12`
x25LkPrMaxPktSize mandatory The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited by the Mtu size of …	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.13`
x25LkPrMaxWinSize mandatory The maximum allowable window size for this link during window size negotiation.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.14`
x25LkPrL2WinSize mandatory The layer 2 window size for this link.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.15`
x25LkPrL2RetrTimer mandatory The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.16`
x25LkPrL2RetrCounter mandatory The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this object, the link will be reset or disconnected.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.17`
x25LkPrL2SupervTimer mandatory The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiated, when this timeout…	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.18`
x25LkPrL2IdleTimer mandatory The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the time specified by this object, the link will be disco…	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.19`
x25LkPrAddr mandatory On point-to-point links, this field must be empty. On point-to-multipoint links, this field may be empty or set to a partners (MAC-) address. In the first case, the definition is …	column	OctetString	`.1.3.6.1.4.1.272.4.6.2.1.2`
x25LkPrNegotiation mandatory This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the call parameters dif…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.20`
x25LkPrRestDelayTimer mandatory The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. If layer 2 is estab…	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.23`
x25LkPrVC0 mandatory This object indicates, whether VC#0 shall be allowed on the link. If this object is set to enable, VC#0 is allowed and the value -1 shall be used to indicate the absence of specif…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.24`
x25LkPrRewritingRule mandatory This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being routed. If this value …	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.25`
x25LkPrMode mandatory This field indicates, whether the link is initially operated in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DCE<->DCE) the DTE/DCE assignement is done be mea…	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.3`
x25LkPrModulo mandatory This object indicates, whether the link should be operated in modulo 8 or modulo 128 mode.	column	Enumeration	`.1.3.6.1.4.1.272.4.6.2.1.4`
x25LkPrLIC mandatory Lowest Incoming Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.5`
x25LkPrHIC mandatory Highest Incoming Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.6`
x25LkPrLTC mandatory Lowest Twoway Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.7`
x25LkPrHTC mandatory Highest Twoway Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.8`
x25LkPrLOC mandatory Lowest Outgoing Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels.	column	Integer32	`.1.3.6.1.4.1.272.4.6.2.1.9`

Indexes