HUAWEI-PWE3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
363

hwPWVcTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.1.1 · 1 row entry · 99 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcTable' 
This table is the VC configuration table. Users
can create or delete a VC by it.
hwPWVcEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1
Provides the information of a VC entry.
Indexes
Column Syntax OID
hwPWVcID
Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1
hwPWVcType
The type of the Virtual Circuit.This value indicate the service to be carried over
this PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2
hwPWVcPeerAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3
hwPWVcPeerAddr
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcPeerAddrType is 'unknown').
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4
hwPWVcStatus
Indicates the status of the PW in the local node.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
4backup
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5
hwPWVcInboundLabel
The value of this object identifies the incoming label value of a PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6
hwPWVcOutboundLabel
The value of this object identifies the outgoing label value of a PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7
hwPWVcSwitchSign
This object indicates the type of a switch PW.
Enumeration
Enumerated Values:
1staticTostatic
2ldpTostatic
3ldpToldp
4upe
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8
hwPWVcSwitchID
Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9
hwPWVcSwitchPeerAddrType
Denotes the address type of the peer node of the switch PW.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10
hwPWVcSwitchPeerAddr
This object contain the value of the peer node address of the
switch PW of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcSwitchPeerAddrType is 'unkn…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11
hwPWVcSwitchInboundLabel
The value of this object identifies the incoming label value of a switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12
hwPWVcSwitchOutboundLabel
The value of this object identifies the outgoing label value of a switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13
hwPWVcGroupID
Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
Curren…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14
hwPWVcIfIndex
Index of the interface (or the virtual interface)
associated with the PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15
hwPWVcAcStatus
Local AC status.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
4notify
5notifyDown
6downNotify
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16
hwPWVcACOAMStatus
Denotes the AC's protocol is operational or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17
hwPWVcMtu
If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW.
Integer32r/w
Constraints:
range: 0-0
range: 46-9600
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18
hwPWVcCtrlWord
If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19
hwPWVcVCCV
The value of this object identifies the VCCV value of a PW.
Bitsr/w
Enumerated Values:
0ccCw
1ccAlert
2ccLabel
3cvIcmpping
4cvLspping
5cvBfd
6ccTtl
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20
hwPWVcBandWidth
This object indicates the bandwidth. '0' is the default value.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21
hwPWVcMaxAtmCells
Indicates the max cell supported when vc type is atm.
Unsigned32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22
hwPWVcTnlPolicyName
Indicates the tunnel policy name used.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23
hwPWVcQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is implemented.
Currently,can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24
hwPWVcExplicitPathName
Indicates the explicit path name set by the operator.Currently, can't support.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25
hwPWVcTemplateName
Indicates the PW template index referenced.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26
hwPWVcSecondary
Indicates whether or not the secondary PW is used.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27
hwPWVcUpTime
Indicates the duration when the PW keeps Up for
the last time, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28
hwPWOAMSync
This object indicates whether OAM mapping is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29
hwPWVCForBfdIndex
The index of PW for BFD.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30
hwPWVcDelayTime
The reroute delay time.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31
hwPWVcReroutePolicy
Reroute policy.
Enumerationr/w
Enumerated Values:
1delay
2immediately
3never
4none
5err
6invalid
7immediatelySwitch
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32
hwPWVcResumeTime
The reroute resume time.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33
hwPWVcRerouteReason
Last reroute reason.
HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason
Type Values:
1invalidReason
2vcCreated
3vcDeleted
4ldpSessionDown
5ldpSessionUp
6receivedDifLabelOrMtu
7receivedIntfParaMatching
8receivedIntfParaUnMatched
9receivedUnPassCbitCheck
10receivedUnPassPwLoopCheck
11receivedNewMapping
12receivedNewMappingButRemoteVcDown
13receivedWithdrawn
14receivedLdpRelease
15receivedLdpRequest
16ldpGrEndProcessing
17receivedRsvpMessage
18interfaceUp
19interfaceDown
20interfaceEncapChanged
21refresh
22downloadAgain
23tunnelUp
24tunnelDown
25receivedNewRlb
26deletedRlb
27vcCreatedOrTurnedToAnother
28outInterInInvalidState
29outInterInValidNow
30ldpNotifiForward
31ldpNotifiNotForward
32pwRestart
33downloadFtnAndIlmForEthTrunk
34acOamFaultDetectDisable
35remoteAcFault
36remoteAcFaultResume
37localAcFault
38localAcFaultResume
39remotePsnFault
40remotePsnFaultResume
41localPsnFault
42localPsnFaultResume
43bfdForPwStateChangeToDown
44bfdForPwStateChangeToUp
45bfdForPwStateChangeToAdminDown
46bfdForPwDisable
47manualSetEnable
48manualSetDisable
49delayTimeOut
50resumeTimeOut
51vrrpMaster
52vrrpBackup
53vrrpInit
54vrrpDelete
55vrrpTrack
56undoVrrpTrack
57lspPingTimeOut
58vcDownWhenReceivedNewRLB
59mtuMatched
60mtuUnmatched
61vsiShut
62vsiResume
63setAdminVSI
64undosetAdminVSI
65bvsiBindAc
66bvsiUnbindAc
67ivsiBindBVSI
68ivsiUnbindBVSI
69deletedVSI
70reconstructFwdTable
71mclagMaster
72mclagBackup
73adminPwUp
74adminPwDown
75vccvOk
76vccvFailed
77localIfnetOk
78inVcLabelOk
79localIfnetRelease
80inVcLabelRelease
81switchOverEnable
82switchOverDisable
83setBVSI
84undoSetBVSI
85shutdownBVSI
86undoShutdownBVSI
87notificationReceived
88pwApsSwitch
89routeUnreachable
90routeReachable
91aging
92verification
93tdmBitRateMatched
94tdmBitRateUnmatched
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34
hwPWVcLastRerouteTime
Last reroute time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35
hwPWVcManualSetFault
This object indicates that faults on the primary or secondary PW are manually simulated.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36
hwPWVcActive
Denotes the current vc is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37
hwPWVcVrIfIndex
The value of this object identifies the index of the AC interface bound to a management VRRP backup group.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38
hwPWVcVrID
The value of this object identifies the ID of a management VRRP backup group.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39
hwPWBFDDetectMultiplier
The multiple of detection time.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-50
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40
hwPWBFDMinReceiveInterval
The value of this object identifies the minimum interval at which dynamic BFD packets are received.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41
hwPWBFDMinTransmitInterval
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42
hwPWDynamicBFDDetect
This value indicates the capacitability to support dynamic BFD detect.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43
hwPWBFDRemoteVcID
The value of this object identifies the VC ID of the peer PW.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44
hwPWEthOamType
This value indicates the type of ETH OAM.
Enumerationr/w
Enumerated Values:
1ethOam1ag
2ethOam3ah
3noEthOamCfg
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45
hwPWCfmMaIndex
This value indicates the current CFM MA index.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46
hwPWVcUpStartTime
Specifies the time this PW status was Up(1).
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47
hwPWVcUpSumTime
Indicates the accumulated time when the VC is Up,
in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48
hwPWVcIfName
Name of the interface (or the virtual interface)
associated with the PW.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49
hwPWVcRowStatus
RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51
hwPWVcAtmPackOvertime
The value of this object identifies the ATM cell encapsulation period.
Unsigned32r/w
Constraints:
range: 0-0
range: 100-50000
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52
hwPWVcPwJitterBufferDepth
The value of this object identifies the jitter buffer depth for TDMoPSN.
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53
hwPWVcPwTdmEncapsulationNum
The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.
Unsigned32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54
hwPWVcPwIdleCode
The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.
Unsigned32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55
hwPWVcPwRtpHeader
This object indicates the RTP header carried in a transparently transmitted TDM frame.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56
hwPWVcSwitchTnlPolicyName
This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57
hwPWVcCfmMdIndex
This value indicates the current CFM MD index.
Unsigned32
Constraints:
range: 0-4095
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58
hwPWVcCfmMaName
This value indicates the current CFM MA name used.
OctetStringr/w
Constraints:
range: 0-43
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59
hwPWVcCfmMdName
This value indicates the current CFM MD name used.
OctetStringr/w
Constraints:
range: 0-43
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60
hwPWVcRawOrTagged
Specifies whether the raw or tagged is configured.
Enumeration
Enumerated Values:
1raw
2tagged
3rawTagNotConfiged
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61
hwPWVcInterworkingType
Specifies the interworking type of the VC entry.
Enumeration
Enumerated Values:
1ipInterWorking
2ipLayer2
3ipUnknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62
hwPWVcCir
Specifies the committed information rate, based on the VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63
hwPWVcPir
Specifies the peak information rate, based on the VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64
hwPWVcQosProfile
Specifies the QoS profile's name, based on the VC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65
hwPWVcSwitchCir
Specifies the committed information rate, based on the switch VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66
hwPWVcSwitchPir
Specifies the peak information rate, based on the switch VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67
hwPWVcSwitchQosProfile
Specifies the QoS profile's name, based on the switch VC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68
hwPWVcTrigger
Specifies whether the PW remote interface shutdown or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69
hwPWVcEnableACOAM
Specifies whether ACOAM detection and notification are all enabled or not.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70
hwPWVcSwitchVrIfIndex
Denotes the VRRP interface the switch PW binding to.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71
hwPWVcSwitchVrID
Denotes the VrID the switch PW binding to.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72
hwPWVcQosParaFromPWT
This object indicates the configuration of the Qos parameters managed through command line or PW template.
Enumeration
Enumerated Values:
1cliOrMib
2pwTemplate
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73
hwPWVcBfdParaFromPWT
This object indicates the configuration of the Bfd parameters managed through command line or PW template.
Enumeration
Enumerated Values:
1cliOrMib
2pwTemplate
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74
hwPwVcNegotiateMode
This object indicates the negotiation mode of the PW on the local node.
Enumerationr/w
Enumerated Values:
1slaveOrMaster
2independent
3unknown
4frr
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75
hwPwVcIsBypass
This object indicates whether the PW is the bypass PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76
hwPwVcIsAdmin
This object indicates whether the PW is the administrator PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77
hwPwVcAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78
hwPwVcAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the service PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79
hwPwVcSwitchAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80
hwPwVcSwitchAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the switch PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81
hwPwVcSwitchBackupAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82
hwPwVcSwitchBackupAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83
hwPwVcSwitchBackupVcId
This object indicates the VC ID of the switch backup PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84
hwPwVcSwitchBackupVcPeerAddrType
This object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85
hwPwVcSwitchBackupVcPeerAddr
This object indicates the IP address of the peer on the switch backup PW.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86
hwPwVcSwitchBackupVcReceiveLabel
This object indicates the inbound label of the switch backup VC.
For a static VC, the value of the inbound label ranges from 16 to 1023.
For a dynamic VC, the inbound label is automatically generated by the system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87
hwPwVcSwitchBackupVcSendLabel
This object indicates the outbound label of the switch backup VC.
For a static VC, the value of the outbound label ranges from 0 to 1048575.
For a dynamic VC, the outbound label is automatically generated by the system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88
hwPwVcSwitchBackupVcTnlPolicyName
This object indicates the name of the tunnel policy of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89
hwPwVcSwitchBackupVcCir
This object indicates the CIR of the switch backup VC.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90
hwPwVcSwitchBackupVcPir
This object indicates the PIR of the switch backup VC.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91
hwPwVcSwitchBackupVcQosProfile
This object indicates the name of the QoS profile of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92
hwPwVcSlaveMasterMode
This object indicates whether the status of the VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
4bypass
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93
hwPwVcSwitchVcSlaveMasterMode
This object indicates whether the status of the switch VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94
hwPwVcSwitchBackupVcSlaveMasterMode
This object indicates whether the status of the switch backup VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95
hwPwVcSwitchVcActive
This object indicates whether the status of the switch VC is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96
hwPwVcSwitchBackupVcActive
This object indicates whether the status of the switch backup VC is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97
hwPwVcSwitchCwTrans
This object indicates whether the SPE support Control Word Transparent or not,default is false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98
hwPwVcSwitchVcServiceName
This object indicates the service name of the switch VC.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99
hwPwVcSwitchBackupVcServiceName
This object indicates the service name of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100

hwPWVcTnlTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcTnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcTnlTable' 
This table is used to search the tunnel index of a VC.
hwPWVcTnlEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1
Provides the information of a VC tunnel entry.
Indexes
Column Syntax OID
hwPWVcTnlIndex
This object indicates the tunnel index of the VC.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.1
hwPWVcTnlType
This object indicates the tunnel type.
Enumeration
Enumerated Values:
0unknown
1lsp
2gre
3ipsec
4crLsp
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.2
hwPWTnlForBfdIndex
This object indicates the index of LSP for BFD.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.3

hwPWVcStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcStatisticsTable' 
This table contains the Pwe3's VC packets statistics.
hwPWVcStatisticsEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1
Provides the information of the Pwe3's VC packets
statistics.
Indexes
Column Syntax OID
hwPWVcStatisticsRcvPkts
The total number of packets received on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.1
hwPWVcStatisticsRcvBytes
The total number of bytes received on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.2
hwPWVcStatisticsSndPkts
The total number of packets sent on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.3
hwPWVcStatisticsSndBytes
The total number of bytes sent on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.4

hwPWRemoteVcTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWRemoteVcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWRemoteVcTable' 
This table provides remote PW information for  
each local PW.
hwPWRemoteVcEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1
An entry in this table is created by the agent for
every PW.
Indexes
Column Syntax OID
hwPWRemoteVcID
Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the remote PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1
hwPWRemoteVcType
This value indicate the service to be carried over
the remote PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2
hwPWRemoteVcStatus
Indicates the forwarding status of the remote VC.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3
hwPWRemoteVcGroupID
Indicates the Group ID field of the remote PW.
Currently, this value always be zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4
hwPWRemoteVcMtu
Indicates the supported MTU size of the remote PW.
Unsigned32
Constraints:
range: 0-0
range: 46-9600
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5
hwPWRemoteVcCtrlword
Indicates the control word capability of the remote PW.
HUAWEI-VPLS-EXT-MIBHWEnableValue
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6
hwPWRemoteVcMaxAtmCells
Indicates the max cell supported of the remote PW
when vctype is atm.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7
hwPWRemoteVcNotif
Indicates notification is supported by the remote PW.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8

hwPWVcTDMPerfCurrentTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.1.11 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcTDMPerfCurrentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcTDMPerfCurrentTable' 
This table provides per TDM PW performance information. The contents of this
table entry are reset to zero and gotten new information every 15 minutes.
hwPWVcTDMPerfCurrentEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1
An entry in this table is created by the agent for every TDM PW entry.
Indexes
Column Syntax OID
hwPWVcTDMPerfCurrentMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.1
hwPWVcTDMPerfCurrentJtrBfrOverruns
Number of times the jitter buffer was overrun.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.2
hwPWVcTDMPerfCurrentJtrBfrUnderruns
Number of times a packet needed to be played
out and the jitter buffer was empty.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.3
hwPWVcTDMPerfCurrentMisOrderDropped
Number of packets detected out of order (via control word
sequence numbers) that could not be re-ordered or could
not fit in the jitter buffer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.4
hwPWVcTDMPerfCurrentMalformedPkt
Number of packets detected with unexpected size or
bad headers' stack.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.5
hwPWVcTDMPerfCurrentESs
The counter associated with the number of Error
Seconds encountered. Any malformed packet, sequence error,
LOPS, and the like are considered as Error Seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.6
hwPWVcTDMPerfCurrentSESs
The counter associated with the number of
Severely Error Seconds encountered.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.7
hwPWVcTDMPerfCurrentUASs
The counter associated with the number of
Unavailable Seconds encountered. Any consecutive
ten seconds of SES are counted as one Unavailable
Seconds (UAS).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.8

hwSvcTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.3.1 · 1 row entry · 43 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSvcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwSvcTable' 
This table is the SVC configuration table. Users
can create or delete a SVC by it.
hwSvcEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1
Provides the information of a SVC entry.
Indexes
Column Syntax OID
hwSvcIfIndex
Index of the interface (or the virtual interface)
associated with the PW.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1
hwSvcID
Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2
hwSvcType
Index for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsTyper/w
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3
hwSvcPeerAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4
hwSvcPeerAddr
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwSvcPeerAddrType is 'unknown').
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5
hwSvcStatus
Indicates the status of the PW in the local node.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6
hwSvcInboundLabel
This object indicates the inbound label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7
hwSvcOutboundLabel
This object indicates the outbound label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8
hwSvcGroupID
Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if SvcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
Current…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9
hwSvcAcStatus
Local AC status.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10
hwSvcACOAMStatus
Denotes the AC's protocol is operational or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11
hwSvcMtu
If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW…
Integer32
Constraints:
range: 0-0
range: 46-9600
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12
hwSvcCtrlWord
If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13
hwSvcVCCV
Indicates the optional VCCV capabilities of the SVC.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|cvLspping(4)|cvBfd(5). The default
value …
Bitsr/w
Enumerated Values:
0ccCw
1ccAlert
2ccLabel
3cvIcmpping
4cvLspping
5cvBfd
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14
hwSvcBandWidth
This object indicates the bandwidth.Currently, can't support.'0' is the default value.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15
hwSvcMaxAtmCells
Indicates the max cell supported when vc type is atm.
Unsigned32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16
hwSvcTnlPolicyName
Indicates the tunnel policy name used.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17
hwSvcQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is implemented.
Currently, can't support.'0' is the default value.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18
hwSvcPWTemplateName
Indicates the PW template index referenced.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19
hwSvcUpTime
Indicates the duration when the SVC keeps Up
for the last time, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20
hwSvcOAMSync
Denotes the AC and PSN are enable or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21
hwSvcForBfdIndex
The index of PW for BFD.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22
hwSvcSecondary
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23
hwSvcDelayTime
The reroute delay time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24
hwSvcReroutePolicy
Reroute policy.
Enumeration
Enumerated Values:
1delay
2immediately
3never
4none
5err
6invalid
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25
hwSvcResumeTime
The reroute resume time.Currently, can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26
hwSvcRerouteReason
Last reroute reason.
HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason
Type Values:
1invalidReason
2vcCreated
3vcDeleted
4ldpSessionDown
5ldpSessionUp
6receivedDifLabelOrMtu
7receivedIntfParaMatching
8receivedIntfParaUnMatched
9receivedUnPassCbitCheck
10receivedUnPassPwLoopCheck
11receivedNewMapping
12receivedNewMappingButRemoteVcDown
13receivedWithdrawn
14receivedLdpRelease
15receivedLdpRequest
16ldpGrEndProcessing
17receivedRsvpMessage
18interfaceUp
19interfaceDown
20interfaceEncapChanged
21refresh
22downloadAgain
23tunnelUp
24tunnelDown
25receivedNewRlb
26deletedRlb
27vcCreatedOrTurnedToAnother
28outInterInInvalidState
29outInterInValidNow
30ldpNotifiForward
31ldpNotifiNotForward
32pwRestart
33downloadFtnAndIlmForEthTrunk
34acOamFaultDetectDisable
35remoteAcFault
36remoteAcFaultResume
37localAcFault
38localAcFaultResume
39remotePsnFault
40remotePsnFaultResume
41localPsnFault
42localPsnFaultResume
43bfdForPwStateChangeToDown
44bfdForPwStateChangeToUp
45bfdForPwStateChangeToAdminDown
46bfdForPwDisable
47manualSetEnable
48manualSetDisable
49delayTimeOut
50resumeTimeOut
51vrrpMaster
52vrrpBackup
53vrrpInit
54vrrpDelete
55vrrpTrack
56undoVrrpTrack
57lspPingTimeOut
58vcDownWhenReceivedNewRLB
59mtuMatched
60mtuUnmatched
61vsiShut
62vsiResume
63setAdminVSI
64undosetAdminVSI
65bvsiBindAc
66bvsiUnbindAc
67ivsiBindBVSI
68ivsiUnbindBVSI
69deletedVSI
70reconstructFwdTable
71mclagMaster
72mclagBackup
73adminPwUp
74adminPwDown
75vccvOk
76vccvFailed
77localIfnetOk
78inVcLabelOk
79localIfnetRelease
80inVcLabelRelease
81switchOverEnable
82switchOverDisable
83setBVSI
84undoSetBVSI
85shutdownBVSI
86undoShutdownBVSI
87notificationReceived
88pwApsSwitch
89routeUnreachable
90routeReachable
91aging
92verification
93tdmBitRateMatched
94tdmBitRateUnmatched
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27
hwSvcLastRerouteTime
Last reroute time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28
hwSvcManualSetFault
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29
hwSvcActive
Denotes the current vc is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30
hwSvcUpStartTime
Specifies the time this PW status was Up(1).
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31
hwSvcUpSumTime
Indicates the accumulated time when the SVC is Up,
in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32
hwSvcAtmPackOvertime
Specifies the AtmPackOvertime.
Unsigned32r/w
Constraints:
range: 0-0
range: 100-50000
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33
hwSvcPwJitterBufferDepth
Specifies the PwJitterBufferDepth.
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34
hwSvcPwTdmEncapsulationNum
Specifies the PwTdmEncapsulationNum.
Unsigned32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35
hwSvcPwIdleCode
Specifies the PwIdleCode.
Unsigned32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36
hwSvcPwRtpHeader
Specifies the PwRtpHeader.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37
hwSvcRawOrTagged
Specifies whether the VLAN tag of the SVC entry is attached or stripped.
Enumerationr/w
Enumerated Values:
1raw
2tagged
3rawTagNotConfiged
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38
hwSvcInterworkingType
Specifies the interworking type of the SVC entry.
Enumerationr/w
Enumerated Values:
1ipInterWorking
2ipLayer2
3ipUnknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39
hwSvcCir
Specifies the committed information rate, based on the SVC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40
hwSvcPir
Specifies the peak information rate, based on the SVC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41
hwSvcQosProfile
Specifies the QoS profile's name, based on the SVC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42
hwSvcRowStatus
RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51

hwSvcTnlTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSvcTnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwSvcTnlTable' 
This table is used to search the tunnel index of a SVC.
hwSvcTnlEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1
Provides the information of a SVC tunnel entry.
Indexes
Column Syntax OID
hwSvcTnlIndex
This object indicates the tunnel index of the SVC.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.1
hwSvcTnlType
This object indicates the tunnel type.
Enumeration
Enumerated Values:
1lsp
2gre
3ipsec
4crLsp
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.2
hwSvcTnlForBfdIndex
This object indicates the index of LSP for BFD.
Currently, can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.3

hwSvcStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSvcStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwSvcStatisticsTable' 
This table contains the L2vpn's SVC packets statistics.
hwSvcStatisticsEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1
Provides the information of the L2VPN's SVC packets
Statistics.
Indexes
Column Syntax OID
hwSvcStatisticsRcvPkts
The total number of packets received on this SVC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.1
hwSvcStatisticsRcvBytes
The total number of bytes received on this SVC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.2
hwSvcStatisticsSndPkts
The total number of packets sent on this SVC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.3
hwSvcStatisticsSndBytes
The total number of bytes sent on the SVC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.4

hwSvcExtTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.3.8 · 1 row entry · 39 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSvcExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwSvcExtTable' 
This table is the SVC configuration extend table. Users
can query a SVC by it.
hwSvcExtEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1
Provides the information of a SVC entry.
Indexes
Column Syntax OID
hwSvcExtIfIndex
Index of the interface (or the virtual interface)
associated with the PW.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.1
hwSvcExtPWType
Index for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the type of the LDP PW VC.
HWL2VpnVcType
Type Values:
1main
2secondary
3bypass
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.2
hwSvcExtID
Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.3
hwSvcExtType
Index for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsTyper/w
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.4
hwSvcExtPeerAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.5
hwSvcExtPeerAddr
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwSvcExtPeerAddrType is 'unknown').
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.6
hwSvcExtStatus
Indicates the status of the PW in the local node.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.7
hwSvcExtInboundLabel
This object indicates the inbound label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.8
hwSvcExtOutboundLabel
This object indicates the outbound label.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.9
hwSvcExtAcStatus
Local AC status.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.10
hwSvcExtACOAMStatus
Denotes the AC's protocol is operational or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.11
hwSvcExtCtrlWord
If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.12
hwSvcExtVCCV
Indicates the optional VCCV capabilities of the SVC.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|cvLspping(4)|cvBfd(5). The default
value …
Bitsr/w
Enumerated Values:
0ccCw
1ccAlert
2ccLabel
3cvIcmpping
4cvLspping
5cvBfd
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.13
hwSvcExtMaxAtmCells
Indicates the max cell supported when vc type is atm.
Unsigned32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.14
hwSvcExtTnlPolicyName
Indicates the tunnel policy name used.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.15
hwSvcExtPWTemplateName
Indicates the PW template index referenced.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.16
hwSvcExtUpTime
Indicates the duration when the SVC keeps Up
for the last time, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.17
hwSvcExtOAMSync
Denotes the AC and PSN are enable or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.18
hwSvcExtForBfdIndex
The index of PW for BFD.Currently, can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.19
hwSvcExtSecondary
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.20
hwSvcExtDelayTime
The reroute delay time.Currently, can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.21
hwSvcExtReroutePolicy
Reroute policy.Currently, can't support.Return the default value is 'invalid(6)'.
Enumeration
Enumerated Values:
1delay
2immediately
3never
4none
5err
6invalid
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.22
hwSvcExtRerouteReason
Last reroute reason.Currently, can't support.Return the default value is 'invalidReason(1)'.
HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason
Type Values:
1invalidReason
2vcCreated
3vcDeleted
4ldpSessionDown
5ldpSessionUp
6receivedDifLabelOrMtu
7receivedIntfParaMatching
8receivedIntfParaUnMatched
9receivedUnPassCbitCheck
10receivedUnPassPwLoopCheck
11receivedNewMapping
12receivedNewMappingButRemoteVcDown
13receivedWithdrawn
14receivedLdpRelease
15receivedLdpRequest
16ldpGrEndProcessing
17receivedRsvpMessage
18interfaceUp
19interfaceDown
20interfaceEncapChanged
21refresh
22downloadAgain
23tunnelUp
24tunnelDown
25receivedNewRlb
26deletedRlb
27vcCreatedOrTurnedToAnother
28outInterInInvalidState
29outInterInValidNow
30ldpNotifiForward
31ldpNotifiNotForward
32pwRestart
33downloadFtnAndIlmForEthTrunk
34acOamFaultDetectDisable
35remoteAcFault
36remoteAcFaultResume
37localAcFault
38localAcFaultResume
39remotePsnFault
40remotePsnFaultResume
41localPsnFault
42localPsnFaultResume
43bfdForPwStateChangeToDown
44bfdForPwStateChangeToUp
45bfdForPwStateChangeToAdminDown
46bfdForPwDisable
47manualSetEnable
48manualSetDisable
49delayTimeOut
50resumeTimeOut
51vrrpMaster
52vrrpBackup
53vrrpInit
54vrrpDelete
55vrrpTrack
56undoVrrpTrack
57lspPingTimeOut
58vcDownWhenReceivedNewRLB
59mtuMatched
60mtuUnmatched
61vsiShut
62vsiResume
63setAdminVSI
64undosetAdminVSI
65bvsiBindAc
66bvsiUnbindAc
67ivsiBindBVSI
68ivsiUnbindBVSI
69deletedVSI
70reconstructFwdTable
71mclagMaster
72mclagBackup
73adminPwUp
74adminPwDown
75vccvOk
76vccvFailed
77localIfnetOk
78inVcLabelOk
79localIfnetRelease
80inVcLabelRelease
81switchOverEnable
82switchOverDisable
83setBVSI
84undoSetBVSI
85shutdownBVSI
86undoShutdownBVSI
87notificationReceived
88pwApsSwitch
89routeUnreachable
90routeReachable
91aging
92verification
93tdmBitRateMatched
94tdmBitRateUnmatched
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.23
hwSvcExtLastRerouteTime
Last reroute time.Currently, can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.24
hwSvcExtManualSetFault
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.25
hwSvcExtActive
Denotes the current vc is active or not.Currently, can't support.Return the default value is 'false'.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.26
hwSvcExtUpStartTime
Specifies the time this PW status was Up(1).
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.27
hwSvcExtUpSumTime
Indicates the accumulated time when the SVC is Up,
in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.28
hwSvcExtAtmPackOvertime
Specifies the AtmPackOvertime.
Unsigned32r/w
Constraints:
range: 0-0
range: 100-50000
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.29
hwSvcExtPwJitterBufferDepth
Specifies the PwJitterBufferDepth.
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.30
hwSvcExtPwTdmEncapsulationNum
Specifies the PwTdmEncapsulationNum.
Unsigned32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.31
hwSvcExtPwIdleCode
Specifies the PwIdleCode.
Unsigned32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.32
hwSvcExtPwRtpHeader
Specifies the PwRtpHeader.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.33
hwSvcExtRawOrTagged
Specifies whether the VLAN tag of the SVC entry is attached or stripped.
Enumerationr/w
Enumerated Values:
1raw
2tagged
3rawTagNotConfiged
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.34
hwSvcExtInterworkingType
Specifies the interworking type of the SVC entry.
Enumerationr/w
Enumerated Values:
1ipInterWorking
2ipLayer2
3ipUnknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.35
hwSvcExtRowStatus
RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.36
hwSvcExtCir
Specifies the committed information rate, based on the SVC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.37
hwSvcExtPir
Specifies the peak information rate, based on the SVC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.38
hwSvcExtQosProfile
Specifies the QoS profile's name, based on the SVC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.3.8.1.39

hwPWTemplateTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.5 · 1 row entry · 26 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWTemplateTable' 
This table specifies information for configuring and 
status monitoring to PW tempalte.
hwPWTemplateEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.5.1
A row in this table represents a pseudo wire (PW) template.
It is indexed by hwPWCmdTemplateIndex, which uniquely
identifying a singular tempalte.
Indexes
Column Syntax OID
hwPWTemplateName
The name of the PW template.
Set by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set-up…
OctetString
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1
hwPWTemplatePeerAddrType
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2
hwPWTemplatePeerAddr
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3
hwPWTemplateCtrlword
Indicates the control word capability of the switch PW.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4
hwPWTemplateVCCV
Indicates the optional VCCV capabilities of the PW template.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvB…
Bitsr/w
Enumerated Values:
0ccCw
1ccAlert
2ccLabel
3cvIcmpping
4cvLspping
5cvBfd
6ccTtl
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5
hwPWTemplateFrag
Indicates whether or not fragmentaion is supported.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6
hwPWTemplateBandwidth
Indicates the bandwitdh when signaling protocol is rsvp.
Currently, can't support.'0' is the default value.
Integer32
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7
hwPWTemplateTnlPolicyName
Indicates the tunnel policy name used.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8
hwPWTemplateQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is
implemented.Currently, can't support.'0' is the default value.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9
hwPWTemplateExplicitPathName
Indicates the explicit path name set by the operator.Currently, can't support.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10
hwPWTemplateBFDDetectMultiplier
The multiple of detection time.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-50
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11
hwPWTemplateBFDMinReceiveInterval
The interval of bfd messages to be received.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12
hwPWTemplateBFDMinTransmitInterval
The interval of bfd messages to be sent.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13
hwPWTemplateDynamicBFDDetect
This value indicates the capacitability to support dynamic BFD detect.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14
hwPWTemplateMaxAtmCells
Specifies the MaxAtmCells.
Unsigned32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15
hwPWTemplateAtmPackOvertime
Specifies the AtmPackOvertime.
Unsigned32r/w
Constraints:
range: 0-0
range: 100-50000
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16
hwPWTemplatePwJitterBufferDepth
Specifies the PwJitterBufferDepth.
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17
hwPWTemplatePwTdmEncapsulationNum
Specifies the PwTdmEncapsulationNum.
Unsigned32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18
hwPWTemplatePwIdleCode
Specifies the PwIdleCode.
Unsigned32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19
hwPWTemplatePwRtpHeader
Specifies the PwRtpHeader.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20
hwPWTemplatePwCCSeqEnable
Specifies the CC Sequence is enable or not.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21
hwPWTemplateCir
Specifies the committed information rate, based on the PW template entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22
hwPWTemplatePir
Specifies the peak information rate, based on the PW template entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23
hwPWTemplateQosProfile
Specifies the QoS profile's name, based on the PW template entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24
hwPWTemplateFlowLabel
The value of this object identifies whether the PW FlowLabel is enabled.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25
hwPWTemplateRowStatus
RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51

hwPWTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.7.1 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWTable' 
This table indicates a PW, that is Static PW or LDP PW
hwPWEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1
Provides the information of a VC key entry.
Indexes
Column Syntax OID
hwPWId
Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1
hwPWType
Index for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2
hwPWPeerIp
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3
hwPWInterfaceIndex
Index of the interface (or the virtual interface)
associated with the PW.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4

hwPWVcExpandTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.8.1 · 1 row entry · 99 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcExpandTable' 
This table is the VC configuration table. Users
can create or delete a VC by it.
hwPWVcExpandEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1
Provides the information of a VC entry.
Indexes
Column Syntax OID
hwPWVcIDExpand
Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.1
hwPWVcTypeExpand
The type of the Virtual Circuit.This value indicate the service to be carried over
this PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.2
hwPWVcPeerAddrTypeExpand
Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.3
hwPWVcPeerAddrExpand
This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcPeerAddrType is 'unknown').
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.4
hwPWVcStatusExpand
Indicates the status of the PW in the local node.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
4backup
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.5
hwPWVcInboundLabelExpand
The value of this object identifies the incoming label value of a PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.6
hwPWVcOutboundLabelExpand
The value of this object identifies the outgoing label value of a PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.7
hwPWVcSwitchSignExpand
This object indicates the type of a switch PW.
Enumeration
Enumerated Values:
1staticTostatic
2ldpTostatic
3ldpToldp
4upe
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.8
hwPWVcSwitchIDExpand
Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.9
hwPWVcSwitchPeerAddrTypeExpand
Denotes the address type of the peer node of the switch PW.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.
Currently, support 'ipv4' only.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.10
hwPWVcSwitchPeerAddrExpand
This object contain the value of the peer node address of the
switch PW of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcSwitchPeerAddrType is 'unkn…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.11
hwPWVcSwitchInboundLabelExpand
The value of this object identifies the incoming label value of a switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.12
hwPWVcSwitchOutboundLabelExpand
The value of this object identifies the outgoing label value of a switch PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.13
hwPWVcGroupIDExpand
Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
Curren…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.14
hwPWVcIfIndexExpand
Index of the interface (or the virtual interface)
associated with the PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.15
hwPWVcAcStatusExpand
Local AC status.
Currently, can't support 'plugout'.
Enumeration
Enumerated Values:
1up
2down
3plugout
4notify
5notifyDown
6downNotify
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.16
hwPWVcACOAMStatusExpand
Denotes the AC's protocol is operational or not.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.17
hwPWVcMtuExpand
If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW.
Integer32r/w
Constraints:
range: 0-0
range: 46-9600
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.18
hwPWVcCtrlWordExpand
If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.
HUAWEI-VPLS-EXT-MIBHWEnableValuer/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.19
hwPWVcVCCVExpand
The value of this object identifies the VCCV value of a PW.
Bitsr/w
Enumerated Values:
0ccCw
1ccAlert
2ccLabel
3cvIcmpping
4cvLspping
5cvBfd
6ccTtl
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.20
hwPWVcBandWidthExpand
This object indicates the bandwidth. '0' is the default value.
Unsigned32r/w
Constraints:
range: 0-32000000
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.21
hwPWVcMaxAtmCellsExpand
Indicates the max cell supported when vc type is atm.
Unsigned32r/w
Constraints:
range: 0-28
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.22
hwPWVcTnlPolicyNameExpand
Indicates the tunnel policy name used.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.23
hwPWVcQoSBehaviorIndexExpand
Indicates the traffic behavior Index when QOS is implemented.
Currently,can't support.Return the default value is '0'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.24
hwPWVcExplicitPathNameExpand
Indicates the explicit path name set by the operator.Currently, can't support.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.25
hwPWVcTemplateNameExpand
Indicates the PW template index referenced.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.26
hwPWVcSecondaryExpand
Indicates whether or not the secondary PW is used.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.27
hwPWVcUpTimeExpand
Indicates the duration when the PW keeps Up for
the last time, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.28
hwPWOAMSyncExpand
This object indicates whether OAM mapping is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.29
hwPWVCForBfdIndexExpand
The index of PW for BFD.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.30
hwPWVcDelayTimeExpand
The reroute delay time.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.31
hwPWVcReroutePolicyExpand
Reroute policy.
Enumerationr/w
Enumerated Values:
1delay
2immediately
3never
4none
5err
6invalid
7immediatelySwitch
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.32
hwPWVcResumeTimeExpand
The reroute resume time.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.33
hwPWVcRerouteReasonExpand
Last reroute reason.
HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason
Type Values:
1invalidReason
2vcCreated
3vcDeleted
4ldpSessionDown
5ldpSessionUp
6receivedDifLabelOrMtu
7receivedIntfParaMatching
8receivedIntfParaUnMatched
9receivedUnPassCbitCheck
10receivedUnPassPwLoopCheck
11receivedNewMapping
12receivedNewMappingButRemoteVcDown
13receivedWithdrawn
14receivedLdpRelease
15receivedLdpRequest
16ldpGrEndProcessing
17receivedRsvpMessage
18interfaceUp
19interfaceDown
20interfaceEncapChanged
21refresh
22downloadAgain
23tunnelUp
24tunnelDown
25receivedNewRlb
26deletedRlb
27vcCreatedOrTurnedToAnother
28outInterInInvalidState
29outInterInValidNow
30ldpNotifiForward
31ldpNotifiNotForward
32pwRestart
33downloadFtnAndIlmForEthTrunk
34acOamFaultDetectDisable
35remoteAcFault
36remoteAcFaultResume
37localAcFault
38localAcFaultResume
39remotePsnFault
40remotePsnFaultResume
41localPsnFault
42localPsnFaultResume
43bfdForPwStateChangeToDown
44bfdForPwStateChangeToUp
45bfdForPwStateChangeToAdminDown
46bfdForPwDisable
47manualSetEnable
48manualSetDisable
49delayTimeOut
50resumeTimeOut
51vrrpMaster
52vrrpBackup
53vrrpInit
54vrrpDelete
55vrrpTrack
56undoVrrpTrack
57lspPingTimeOut
58vcDownWhenReceivedNewRLB
59mtuMatched
60mtuUnmatched
61vsiShut
62vsiResume
63setAdminVSI
64undosetAdminVSI
65bvsiBindAc
66bvsiUnbindAc
67ivsiBindBVSI
68ivsiUnbindBVSI
69deletedVSI
70reconstructFwdTable
71mclagMaster
72mclagBackup
73adminPwUp
74adminPwDown
75vccvOk
76vccvFailed
77localIfnetOk
78inVcLabelOk
79localIfnetRelease
80inVcLabelRelease
81switchOverEnable
82switchOverDisable
83setBVSI
84undoSetBVSI
85shutdownBVSI
86undoShutdownBVSI
87notificationReceived
88pwApsSwitch
89routeUnreachable
90routeReachable
91aging
92verification
93tdmBitRateMatched
94tdmBitRateUnmatched
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.34
hwPWVcLastRerouteTimeExpand
Last reroute time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.35
hwPWVcManualSetFaultExpand
This object indicates that faults on the primary or secondary PW are manually simulated.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.36
hwPWVcActiveExpand
Denotes the current vc is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.37
hwPWVcVrIfIndexExpand
The value of this object identifies the index of the AC interface bound to a management VRRP backup group.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.38
hwPWVcVrIDExpand
The value of this object identifies the ID of a management VRRP backup group.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.39
hwPWBFDDetectMultiplierExpand
The multiple of detection time.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-50
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.40
hwPWBFDMinReceiveIntervalExpand
The value of this object identifies the minimum interval at which dynamic BFD packets are received.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.41
hwPWBFDMinTransmitIntervalExpand
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
Unsigned32r/w
Constraints:
range: 0-0
range: 3-1000
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.42
hwPWDynamicBFDDetectExpand
This value indicates the capacitability to support dynamic BFD detect.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.43
hwPWBFDRemoteVcIDExpand
The value of this object identifies the VC ID of the peer PW.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.44
hwPWEthOamTypeExpand
This value indicates the type of ETH OAM.
Enumerationr/w
Enumerated Values:
1ethOam1ag
2ethOam3ah
3noEthOamCfg
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.45
hwPWCfmMaIndexExpand
This value indicates the current CFM MA index.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.46
hwPWVcUpStartTimeExpand
Specifies the time this PW status was Up(1).
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.47
hwPWVcUpSumTimeExpand
Indicates the accumulated time when the VC is Up,
in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.48
hwPWVcIfNameExpand
Name of the interface (or the virtual interface)
associated with the PW.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.49
hwPWVcRowStatusExpand
RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.51
hwPWVcAtmPackOvertimeExpand
The value of this object identifies the ATM cell encapsulation period.
Unsigned32r/w
Constraints:
range: 0-0
range: 100-50000
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.52
hwPWVcPwJitterBufferDepthExpand
The value of this object identifies the jitter buffer depth for TDMoPSN.
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.53
hwPWVcPwTdmEncapsulationNumExpand
The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.
Unsigned32r/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.54
hwPWVcPwIdleCodeExpand
The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.
Unsigned32r/w
Constraints:
range: 0-255
range: 65535-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.55
hwPWVcPwRtpHeaderExpand
This object indicates the RTP header carried in a transparently transmitted TDM frame.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.56
hwPWVcSwitchTnlPolicyNameExpand
This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.
OctetStringr/w
Constraints:
range: 0-39
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.57
hwPWVcCfmMdIndexExpand
This value indicates the current CFM MD index.
Unsigned32
Constraints:
range: 0-4095
range: 4294967295-4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.58
hwPWVcCfmMaNameExpand
This value indicates the current CFM MA name used.
OctetStringr/w
Constraints:
range: 0-43
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.59
hwPWVcCfmMdNameExpand
This value indicates the current CFM MD name used.
OctetStringr/w
Constraints:
range: 0-43
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.60
hwPWVcRawOrTaggedExpand
Specifies whether the raw or tagged is configured.
Enumeration
Enumerated Values:
1raw
2tagged
3rawTagNotConfiged
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.61
hwPWVcInterworkingTypeExpand
Specifies the interworking type of the VC entry.
Enumeration
Enumerated Values:
1ipInterWorking
2ipLayer2
3ipUnknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.62
hwPWVcCirExpand
Specifies the committed information rate, based on the VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.63
hwPWVcPirExpand
Specifies the peak information rate, based on the VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.64
hwPWVcQosProfileExpand
Specifies the QoS profile's name, based on the VC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.65
hwPWVcSwitchCirExpand
Specifies the committed information rate, based on the switch VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.66
hwPWVcSwitchPirExpand
Specifies the peak information rate, based on the switch VC entry.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.67
hwPWVcSwitchQosProfileExpand
Specifies the QoS profile's name, based on the switch VC entry.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.68
hwPWVcTriggerExpand
Specifies whether the PW remote interface shutdown or not.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.69
hwPWVcEnableACOAMExpand
Specifies whether ACOAM detection and notification are all enabled or not.
P-BRIDGE-MIBEnabledStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.70
hwPWVcSwitchVrIfIndexExpand
Denotes the VRRP interface the switch PW binding to.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.71
hwPWVcSwitchVrIDExpand
Denotes the VrID the switch PW binding to.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.72
hwPWVcQosParaFromPWTExpand
This object indicates the configuration of the Qos parameters managed through command line or PW template.
Enumeration
Enumerated Values:
1cliOrMib
2pwTemplate
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.73
hwPWVcBfdParaFromPWTExpand
This object indicates the configuration of the Bfd parameters managed through command line or PW template.
Enumeration
Enumerated Values:
1cliOrMib
2pwTemplate
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.74
hwPwVcNegotiateModeExpand
This object indicates the negotiation mode of the PW on the local node.
Enumerationr/w
Enumerated Values:
1slaveOrMaster
2independent
3unknown
4frr
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.75
hwPwVcIsBypassExpand
This object indicates whether the PW is the bypass PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.76
hwPwVcIsAdminExpand
This object indicates whether the PW is the administrator PW.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.77
hwPwVcAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.78
hwPwVcAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the service PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.79
hwPwVcSwitchAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.80
hwPwVcSwitchAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the switch PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.81
hwPwVcSwitchBackupAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.82
hwPwVcSwitchBackupAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW.
Enumeration
Enumerated Values:
1up
2down
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.83
hwPwVcSwitchBackupVcIdExpand
This object indicates the VC ID of the switch backup PW.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.84
hwPwVcSwitchBackupVcPeerAddrTypeExpand
This object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.85
hwPwVcSwitchBackupVcPeerAddrExpand
This object indicates the IP address of the peer on the switch backup PW.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.86
hwPwVcSwitchBackupVcReceiveLabelExpand
This object indicates the inbound label of the switch backup VC.
For a static VC, the value of the inbound label ranges from 16 to 1023.
For a dynamic VC, the inbound label is automatically generated by the system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.87
hwPwVcSwitchBackupVcSendLabelExpand
This object indicates the outbound label of the switch backup VC.
For a static VC, the value of the outbound label ranges from 0 to 1048575.
For a dynamic VC, the outbound label is automatically generated by the system.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.88
hwPwVcSwitchBackupVcTnlPolicyNameExpand
This object indicates the name of the tunnel policy of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-19
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.89
hwPwVcSwitchBackupVcCirExpand
This object indicates the CIR of the switch backup VC.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.90
hwPwVcSwitchBackupVcPirExpand
This object indicates the PIR of the switch backup VC.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.91
hwPwVcSwitchBackupVcQosProfileExpand
This object indicates the name of the QoS profile of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.92
hwPwVcSlaveMasterModeExpand
This object indicates whether the status of the VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
4bypass
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.93
hwPwVcSwitchVcSlaveMasterModeExpand
This object indicates whether the status of the switch VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.94
hwPwVcSwitchBackupVcSlaveMasterModeExpand
This object indicates whether the status of the switch backup VC is master or slave.
Enumeration
Enumerated Values:
1slave
2master
3unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.95
hwPwVcSwitchVcActiveExpand
This object indicates whether the status of the switch VC is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.96
hwPwVcSwitchBackupVcActiveExpand
This object indicates whether the status of the switch backup VC is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.97
hwPwVcSwitchCwTransExpand
This object indicates whether the SPE support Control Word Transparent or not,default is false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.98
hwPwVcSwitchVcServiceNameExpand
This object indicates the service name of the switch VC.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.99
hwPwVcSwitchBackupVcServiceNameExpand
This object indicates the service name of the switch backup VC.
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.100

hwPWVcTnlExpandTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.8.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcTnlExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcTnlExpandTable' 
This table is used to search the tunnel index of a VC.
hwPWVcTnlExpandEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.8.2.1
Provides the information of a VC tunnel entry.
Indexes
Column Syntax OID
hwPWVcTnlIndexExpand
This object indicates the tunnel index of the VC.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.2.1.1
hwPWVcTnlTypeExpand
This object indicates the tunnel type.
Enumeration
Enumerated Values:
0unknown
1lsp
2gre
3ipsec
4crLsp
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.2.1.2
hwPWTnlForBfdIndexExpand
This object indicates the index of LSP for BFD.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.2.1.3

hwPWVcStatisticsExpandTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.8.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcStatisticsExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcStatisticsExpandTable' 
This table contains the Pwe3's VC packets statistics.
hwPWVcStatisticsExpandEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.8.3.1
Provides the information of the Pwe3's VC packets
statistics.
Indexes
Column Syntax OID
hwPWVcStatisticsRcvPktsExpand
The total number of packets received on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.3.1.1
hwPWVcStatisticsRcvBytesExpand
The total number of bytes received on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.3.1.2
hwPWVcStatisticsSndPktsExpand
The total number of packets sent on this VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.3.1.3
hwPWVcStatisticsSndBytesExpand
The total number of bytes sent on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.3.1.4

hwPWRemoteVcExpandTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.8.4 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWRemoteVcExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWRemoteVcExpandTable' 
This table provides remote PW information for  
each local PW.
hwPWRemoteVcExpandEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1
An entry in this table is created by the agent for
every PW.
Indexes
Column Syntax OID
hwPWRemoteVcIDExpand
Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the remote PW.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.1
hwPWRemoteVcTypeExpand
This value indicate the service to be carried over
the remote PW.
HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Type Values:
1frameRelayDlciMartini
2atmAal5SduVccTransport
3atmTransparentCellTransport
4vlan
5ethernet
6hdlc
7ppp
8cem
9atmN2OneVccCellTransport
10atmN2OneVpcCellTransport
11ipLayer2Transport
12atmOne2OneVccCellMode
13atmOne2OneVpcCellMode
14atmAal5PduVccTransport
15frameRelayPortMode
16cep
17saE1oP
18saT1oP
19saE3oP
20saT3oP
21cESoPsnBasicMode
22tDMoIPbasicMode
23l2VpnCESoPSNTDMwithCAS
24l2VpnTDMoIPTDMwithCAS
25frameRelayDlci
64ipInterworking
255unknown
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.2
hwPWRemoteVcStatusExpand
Indicates the forwarding status of the remote VC.
Enumeration
Enumerated Values:
1up
2down
3plugout
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.3
hwPWRemoteVcGroupIDExpand
Indicates the Group ID field of the remote PW.
Currently, this value always be zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.4
hwPWRemoteVcMtuExpand
Indicates the supported MTU size of the remote PW.
Unsigned32
Constraints:
range: 0-0
range: 46-9600
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.5
hwPWRemoteVcCtrlwordExpand
Indicates the control word capability of the remote PW.
HUAWEI-VPLS-EXT-MIBHWEnableValue
Type Values:
1enable
2disable
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.6
hwPWRemoteVcMaxAtmCellsExpand
Indicates the max cell supported of the remote PW
when vctype is atm.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.7
hwPWRemoteVcNotifExpand
Indicates notification is supported by the remote PW.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.4.1.8

hwPWVcTDMPerfCurrentExpandTable

table
.1.3.6.1.4.1.2011.5.25.119.4.1.8.6 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwPWVcTDMPerfCurrentExpandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-PWE3-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-PWE3-MIB::hwPWVcTDMPerfCurrentExpandTable' 
This table provides per TDM PW performance information. The contents of this
table entry are reset to zero and gotten new information every 15 minutes.
hwPWVcTDMPerfCurrentExpandEntry row .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1
An entry in this table is created by the agent for every TDM PW entry.
Indexes
Column Syntax OID
hwPWVcTDMPerfCurrentMissingPktsExpand
Number of missing packets (as detected via control word
sequence number gaps).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.1
hwPWVcTDMPerfCurrentJtrBfrOverrunsExpand
Number of times the jitter buffer was overrun.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.2
hwPWVcTDMPerfCurrentJtrBfrUnderrunsExpand
Number of times a packet needed to be played
out and the jitter buffer was empty.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.3
hwPWVcTDMPerfCurrentMisOrderDroppedExpand
Number of packets detected out of order (via control word
sequence numbers) that could not be re-ordered or could
not fit in the jitter buffer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.4
hwPWVcTDMPerfCurrentMalformedPktExpand
Number of packets detected with unexpected size or
bad headers' stack.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.5
hwPWVcTDMPerfCurrentESsExpand
The counter associated with the number of Error
Seconds encountered. Any malformed packet, sequence error,
LOPS, and the like are considered as Error Seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.6
hwPWVcTDMPerfCurrentSESsExpand
The counter associated with the number of
Severely Error Seconds encountered.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.7
hwPWVcTDMPerfCurrentUASsExpand
The counter associated with the number of
Unavailable Seconds encountered. Any consecutive
ten seconds of SES are counted as one Unavailable
Seconds (UAS).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.119.4.1.8.6.1.8