hwSvcQoSBehaviorIndex
HUAWEI-PWE3-MIB ·
.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18
Object
Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value.
Context
- MIB
- HUAWEI-PWE3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwSvcEntry
- Table
- hwSvcTable
- Siblings
- 42
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwSvcIfIndex Index of the interface (or the virtual interface)
associated with the PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1 |
| hwSvcAcStatus Local AC status.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10 |
| hwSvcACOAMStatus Denotes the AC's protocol is operational or not. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11 |
| hwSvcMtu If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the vir… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12 |
| hwSvcCtrlWord If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is… | column | HUAWEI-VPLS-EXT-MIBHWEnableValue | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13 |
| hwSvcVCCV Indicates the optional VCCV capabilities of the SVC.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|cv… | column | Bits | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14 |
| hwSvcBandWidth This object indicates the bandwidth.Currently, can't support.'0' is the default value. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15 |
| hwSvcMaxAtmCells Indicates the max cell supported when vc type is atm. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16 |
| hwSvcTnlPolicyName Indicates the tunnel policy name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17 |
| hwSvcPWTemplateName Indicates the PW template index referenced. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19 |
| hwSvcID Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2 |
| hwSvcUpTime Indicates the duration when the SVC keeps Up
for the last time, in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20 |
| hwSvcOAMSync Denotes the AC and PSN are enable or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21 |
| hwSvcForBfdIndex The index of PW for BFD. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22 |
| hwSvcSecondary Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23 |
| hwSvcDelayTime The reroute delay time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24 |
| hwSvcReroutePolicy Reroute policy. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25 |
| hwSvcResumeTime The reroute resume time.Currently, can't support.Return the default value is '0'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26 |
| hwSvcRerouteReason Last reroute reason. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27 |
| hwSvcLastRerouteTime Last reroute time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28 |
| hwSvcManualSetFault Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29 |
| hwSvcType Index for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3 |
| hwSvcActive Denotes the current vc is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30 |
| hwSvcUpStartTime Specifies the time this PW status was Up(1). | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31 |
| hwSvcUpSumTime Indicates the accumulated time when the SVC is Up,
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32 |
| hwSvcAtmPackOvertime Specifies the AtmPackOvertime. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33 |
| hwSvcPwJitterBufferDepth Specifies the PwJitterBufferDepth. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34 |
| hwSvcPwTdmEncapsulationNum Specifies the PwTdmEncapsulationNum. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35 |
| hwSvcPwIdleCode Specifies the PwIdleCode. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36 |
| hwSvcPwRtpHeader Specifies the PwRtpHeader. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37 |
| hwSvcRawOrTagged Specifies whether the VLAN tag of the SVC entry is attached or stripped. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38 |
| hwSvcInterworkingType Specifies the interworking type of the SVC entry. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39 |
| hwSvcPeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4 |
| hwSvcCir Specifies the committed information rate, based on the SVC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40 |
| hwSvcPir Specifies the peak information rate, based on the SVC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41 |
| hwSvcQosProfile Specifies the QoS profile's name, based on the SVC entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42 |
| hwSvcPeerAddr This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwSvcPeer… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5 |
| hwSvcRowStatus RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51 |
| hwSvcStatus Indicates the status of the PW in the local node.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6 |
| hwSvcInboundLabel This object indicates the inbound label. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7 |
| hwSvcOutboundLabel This object indicates the outbound label. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8 |
| hwSvcGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if SvcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9 |