hwSvcType

HUAWEI-PWE3-MIB · .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3

Object

column r/w HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType

Index for the conceptual row identifying a PW within  
this PW Emulation table.This value indicate the service to be carried over 
this PW.

Context

MIB: HUAWEI-PWE3-MIB
OID: .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3
Type: column
Access: readwrite
Status: current
Parent: hwSvcEntry
Table: hwSvcTable
Siblings: 42

Syntax

HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType

Source: HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType
Base type: Enumeration

Values & Constraints

Type Values

`1`	frameRelayDlciMartini
`2`	atmAal5SduVccTransport
`3`	atmTransparentCellTransport
`4`	vlan
`5`	ethernet
`6`	hdlc
`7`	ppp
`8`	cem
`9`	atmN2OneVccCellTransport
`10`	atmN2OneVpcCellTransport
`11`	ipLayer2Transport
`12`	atmOne2OneVccCellMode
`13`	atmOne2OneVpcCellMode
`14`	atmAal5PduVccTransport
`15`	frameRelayPortMode
`16`	cep
`17`	saE1oP
`18`	saT1oP
`19`	saE3oP
`20`	saT3oP
`21`	cESoPsnBasicMode
`22`	tDMoIPbasicMode
`23`	l2VpnCESoPSNTDMwithCAS
`24`	l2VpnTDMoIPTDMwithCAS
`25`	frameRelayDlci
`64`	ipInterworking
`255`	unknown

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwSvcIfIndex Index of the interface (or the virtual interface) associated with the PW.	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1`
hwSvcAcStatus Local AC status. Currently, can't support 'plugout'.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10`
hwSvcACOAMStatus Denotes the AC's protocol is operational or not.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11`
hwSvcMtu If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the vir…	column	Integer32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12`
hwSvcCtrlWord If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is…	column	HUAWEI-VPLS-EXT-MIBHWEnableValue	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13`
hwSvcVCCV Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)\|ccAlert(1)\|cvLspping(4)\|cvBfd(5) or ccAlert(1)\|cv…	column	Bits	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14`
hwSvcBandWidth This object indicates the bandwidth.Currently, can't support.'0' is the default value.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15`
hwSvcMaxAtmCells Indicates the max cell supported when vc type is atm.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16`
hwSvcTnlPolicyName Indicates the tunnel policy name used.	column	OctetString	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17`
hwSvcQoSBehaviorIndex Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18`
hwSvcPWTemplateName Indicates the PW template index referenced.	column	OctetString	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19`
hwSvcID Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2`
hwSvcUpTime Indicates the duration when the SVC keeps Up for the last time, in seconds.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20`
hwSvcOAMSync Denotes the AC and PSN are enable or not.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21`
hwSvcForBfdIndex The index of PW for BFD.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22`
hwSvcSecondary Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23`
hwSvcDelayTime The reroute delay time.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24`
hwSvcReroutePolicy Reroute policy.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25`
hwSvcResumeTime The reroute resume time.Currently, can't support.Return the default value is '0'.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26`
hwSvcRerouteReason Last reroute reason.	column	HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27`
hwSvcLastRerouteTime Last reroute time.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28`
hwSvcManualSetFault Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29`
hwSvcActive Denotes the current vc is active or not.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30`
hwSvcUpStartTime Specifies the time this PW status was Up(1).	column	OctetString	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31`
hwSvcUpSumTime Indicates the accumulated time when the SVC is Up, in seconds.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32`
hwSvcAtmPackOvertime Specifies the AtmPackOvertime.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33`
hwSvcPwJitterBufferDepth Specifies the PwJitterBufferDepth.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34`
hwSvcPwTdmEncapsulationNum Specifies the PwTdmEncapsulationNum.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35`
hwSvcPwIdleCode Specifies the PwIdleCode.	column	Unsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36`
hwSvcPwRtpHeader Specifies the PwRtpHeader.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37`
hwSvcRawOrTagged Specifies whether the VLAN tag of the SVC entry is attached or stripped.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38`
hwSvcInterworkingType Specifies the interworking type of the SVC entry.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39`
hwSvcPeerAddrType Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4`
hwSvcCir Specifies the committed information rate, based on the SVC entry.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40`
hwSvcPir Specifies the peak information rate, based on the SVC entry.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41`
hwSvcQosProfile Specifies the QoS profile's name, based on the SVC entry.	column	OctetString	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42`
hwSvcPeerAddr This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwSvcPeer…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5`
hwSvcRowStatus RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51`
hwSvcStatus Indicates the status of the PW in the local node. Currently, can't support 'plugout'.	column	Enumeration	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6`
hwSvcInboundLabel This object indicates the inbound label.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7`
hwSvcOutboundLabel This object indicates the outbound label.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8`
hwSvcGroupID Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if SvcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', …	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9`