hwPWVcReroutePolicy
HUAWEI-PWE3-MIB ·
.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32
Object
column
r/w
Enumeration
Reroute policy.
Context
- MIB
- HUAWEI-PWE3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPWVcEntry
- Table
- hwPWVcTable
- Siblings
- 98
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | delay |
2 | immediately |
3 | never |
4 | none |
5 | err |
6 | invalid |
7 | immediatelySwitch |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPWVcID Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1 |
| hwPWVcSwitchPeerAddrType Denotes the address type of the peer node of the switch PW.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.
Currently, support … | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10 |
| hwPwVcSwitchBackupVcServiceName This object indicates the service name of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100 |
| hwPWVcSwitchPeerAddr This object contain the value of the peer node address of the
switch PW of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applica… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11 |
| hwPWVcSwitchInboundLabel The value of this object identifies the incoming label value of a switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12 |
| hwPWVcSwitchOutboundLabel The value of this object identifies the outgoing label value of a switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13 |
| hwPWVcGroupID Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol',… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14 |
| hwPWVcIfIndex Index of the interface (or the virtual interface)
associated with the PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15 |
| hwPWVcAcStatus Local AC status.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16 |
| hwPWVcACOAMStatus Denotes the AC's protocol is operational or not. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17 |
| hwPWVcMtu If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the vir… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18 |
| hwPWVcCtrlWord If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is… | column | HUAWEI-VPLS-EXT-MIBHWEnableValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19 |
| hwPWVcType The type of the Virtual Circuit.This value indicate the service to be carried over
this PW. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2 |
| hwPWVcVCCV The value of this object identifies the VCCV value of a PW. | column | Bits | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20 |
| hwPWVcBandWidth This object indicates the bandwidth. '0' is the default value. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21 |
| hwPWVcMaxAtmCells Indicates the max cell supported when vc type is atm. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22 |
| hwPWVcTnlPolicyName Indicates the tunnel policy name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23 |
| hwPWVcQoSBehaviorIndex Indicates the traffic behavior Index when QOS is implemented.
Currently,can't support.Return the default value is '0'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24 |
| hwPWVcExplicitPathName Indicates the explicit path name set by the operator.Currently, can't support. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25 |
| hwPWVcTemplateName Indicates the PW template index referenced. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26 |
| hwPWVcSecondary Indicates whether or not the secondary PW is used. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27 |
| hwPWVcUpTime Indicates the duration when the PW keeps Up for
the last time, in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28 |
| hwPWOAMSync This object indicates whether OAM mapping is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29 |
| hwPWVcPeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3 |
| hwPWVCForBfdIndex The index of PW for BFD. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30 |
| hwPWVcDelayTime The reroute delay time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31 |
| hwPWVcResumeTime The reroute resume time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33 |
| hwPWVcRerouteReason Last reroute reason. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34 |
| hwPWVcLastRerouteTime Last reroute time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35 |
| hwPWVcManualSetFault This object indicates that faults on the primary or secondary PW are manually simulated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36 |
| hwPWVcActive Denotes the current vc is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37 |
| hwPWVcVrIfIndex The value of this object identifies the index of the AC interface bound to a management VRRP backup group. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38 |
| hwPWVcVrID The value of this object identifies the ID of a management VRRP backup group. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39 |
| hwPWVcPeerAddr This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcPee… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4 |
| hwPWBFDDetectMultiplier The multiple of detection time. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40 |
| hwPWBFDMinReceiveInterval The value of this object identifies the minimum interval at which dynamic BFD packets are received. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41 |
| hwPWBFDMinTransmitInterval The value of this object identifies the minimum interval at which dynamic BFD packets are sent. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42 |
| hwPWDynamicBFDDetect This value indicates the capacitability to support dynamic BFD detect. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43 |
| hwPWBFDRemoteVcID The value of this object identifies the VC ID of the peer PW. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44 |
| hwPWEthOamType This value indicates the type of ETH OAM. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45 |
| hwPWCfmMaIndex This value indicates the current CFM MA index. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46 |
| hwPWVcUpStartTime Specifies the time this PW status was Up(1). | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47 |
| hwPWVcUpSumTime Indicates the accumulated time when the VC is Up,
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48 |
| hwPWVcIfName Name of the interface (or the virtual interface)
associated with the PW. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49 |
| hwPWVcStatus Indicates the status of the PW in the local node.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5 |
| hwPWVcRowStatus RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51 |
| hwPWVcAtmPackOvertime The value of this object identifies the ATM cell encapsulation period. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52 |
| hwPWVcPwJitterBufferDepth The value of this object identifies the jitter buffer depth for TDMoPSN. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53 |
| hwPWVcPwTdmEncapsulationNum The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54 |
| hwPWVcPwIdleCode The value of this object identifies the filling idle code used when a jitter buffer underflow occurs. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55 |
| hwPWVcPwRtpHeader This object indicates the RTP header carried in a transparently transmitted TDM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56 |
| hwPWVcSwitchTnlPolicyName This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57 |
| hwPWVcCfmMdIndex This value indicates the current CFM MD index. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58 |
| hwPWVcCfmMaName This value indicates the current CFM MA name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59 |
| hwPWVcInboundLabel The value of this object identifies the incoming label value of a PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6 |
| hwPWVcCfmMdName This value indicates the current CFM MD name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60 |
| hwPWVcRawOrTagged Specifies whether the raw or tagged is configured. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61 |
| hwPWVcInterworkingType Specifies the interworking type of the VC entry. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62 |
| hwPWVcCir Specifies the committed information rate, based on the VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63 |
| hwPWVcPir Specifies the peak information rate, based on the VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64 |
| hwPWVcQosProfile Specifies the QoS profile's name, based on the VC entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65 |
| hwPWVcSwitchCir Specifies the committed information rate, based on the switch VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66 |
| hwPWVcSwitchPir Specifies the peak information rate, based on the switch VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67 |
| hwPWVcSwitchQosProfile Specifies the QoS profile's name, based on the switch VC entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68 |
| hwPWVcTrigger Specifies whether the PW remote interface shutdown or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69 |
| hwPWVcOutboundLabel The value of this object identifies the outgoing label value of a PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7 |
| hwPWVcEnableACOAM Specifies whether ACOAM detection and notification are all enabled or not. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70 |
| hwPWVcSwitchVrIfIndex Denotes the VRRP interface the switch PW binding to. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71 |
| hwPWVcSwitchVrID Denotes the VrID the switch PW binding to. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72 |
| hwPWVcQosParaFromPWT This object indicates the configuration of the Qos parameters managed through command line or PW template. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73 |
| hwPWVcBfdParaFromPWT This object indicates the configuration of the Bfd parameters managed through command line or PW template. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74 |
| hwPwVcNegotiateMode This object indicates the negotiation mode of the PW on the local node. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75 |
| hwPwVcIsBypass This object indicates whether the PW is the bypass PW. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76 |
| hwPwVcIsAdmin This object indicates whether the PW is the administrator PW. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77 |
| hwPwVcAdminPwIfIndex This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78 |
| hwPwVcAdminPwLinkStatus This object indicates the status of the administrator PW after it is being tracked by the service PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79 |
| hwPWVcSwitchSign This object indicates the type of a switch PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8 |
| hwPwVcSwitchAdminPwIfIndex This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80 |
| hwPwVcSwitchAdminPwLinkStatus This object indicates the status of the administrator PW after it is being tracked by the switch PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81 |
| hwPwVcSwitchBackupAdminPwIfIndex This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82 |
| hwPwVcSwitchBackupAdminPwLinkStatus This object indicates the status of the administrator PW after it is being tracked by the switch backup PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83 |
| hwPwVcSwitchBackupVcId This object indicates the VC ID of the switch backup PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84 |
| hwPwVcSwitchBackupVcPeerAddrType This object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85 |
| hwPwVcSwitchBackupVcPeerAddr This object indicates the IP address of the peer on the switch backup PW. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86 |
| hwPwVcSwitchBackupVcReceiveLabel This object indicates the inbound label of the switch backup VC.
For a static VC, the value of the inbound label ranges from 16 to 1023.
For a dynamic VC, the inbound label is aut… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87 |
| hwPwVcSwitchBackupVcSendLabel This object indicates the outbound label of the switch backup VC.
For a static VC, the value of the outbound label ranges from 0 to 1048575.
For a dynamic VC, the outbound label … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88 |
| hwPwVcSwitchBackupVcTnlPolicyName This object indicates the name of the tunnel policy of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89 |
| hwPWVcSwitchID Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9 |
| hwPwVcSwitchBackupVcCir This object indicates the CIR of the switch backup VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90 |
| hwPwVcSwitchBackupVcPir This object indicates the PIR of the switch backup VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91 |
| hwPwVcSwitchBackupVcQosProfile This object indicates the name of the QoS profile of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92 |
| hwPwVcSlaveMasterMode This object indicates whether the status of the VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93 |
| hwPwVcSwitchVcSlaveMasterMode This object indicates whether the status of the switch VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94 |
| hwPwVcSwitchBackupVcSlaveMasterMode This object indicates whether the status of the switch backup VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95 |
| hwPwVcSwitchVcActive This object indicates whether the status of the switch VC is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96 |
| hwPwVcSwitchBackupVcActive This object indicates whether the status of the switch backup VC is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97 |
| hwPwVcSwitchCwTrans This object indicates whether the SPE support Control Word Transparent or not,default is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98 |
| hwPwVcSwitchVcServiceName This object indicates the service name of the switch VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99 |