hwPWBFDMinTransmitIntervalExpand
HUAWEI-PWE3-MIB ·
.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.42
Object
column
r/w
Unsigned32
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
Context
- MIB
- HUAWEI-PWE3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.42- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPWVcExpandEntry
- Table
- hwPWVcExpandTable
- Siblings
- 98
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 3-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPWVcIDExpand Index for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.1 |
| hwPWVcSwitchPeerAddrTypeExpand Denotes the address type of the peer node of the switch PW.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.
Currently, support … | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.10 |
| hwPwVcSwitchBackupVcServiceNameExpand This object indicates the service name of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.100 |
| hwPWVcSwitchPeerAddrExpand This object contain the value of the peer node address of the
switch PW of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applica… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.11 |
| hwPWVcSwitchInboundLabelExpand The value of this object identifies the incoming label value of a switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.12 |
| hwPWVcSwitchOutboundLabelExpand The value of this object identifies the outgoing label value of a switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.13 |
| hwPWVcGroupIDExpand Used in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol',… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.14 |
| hwPWVcIfIndexExpand Index of the interface (or the virtual interface)
associated with the PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.15 |
| hwPWVcAcStatusExpand Local AC status.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.16 |
| hwPWVcACOAMStatusExpand Denotes the AC's protocol is operational or not. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.17 |
| hwPWVcMtuExpand If not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the vir… | column | Integer32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.18 |
| hwPWVcCtrlWordExpand If signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is… | column | HUAWEI-VPLS-EXT-MIBHWEnableValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.19 |
| hwPWVcTypeExpand The type of the Virtual Circuit.This value indicate the service to be carried over
this PW. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.2 |
| hwPWVcVCCVExpand The value of this object identifies the VCCV value of a PW. | column | Bits | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.20 |
| hwPWVcBandWidthExpand This object indicates the bandwidth. '0' is the default value. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.21 |
| hwPWVcMaxAtmCellsExpand Indicates the max cell supported when vc type is atm. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.22 |
| hwPWVcTnlPolicyNameExpand Indicates the tunnel policy name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.23 |
| hwPWVcQoSBehaviorIndexExpand Indicates the traffic behavior Index when QOS is implemented.
Currently,can't support.Return the default value is '0'. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.24 |
| hwPWVcExplicitPathNameExpand Indicates the explicit path name set by the operator.Currently, can't support. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.25 |
| hwPWVcTemplateNameExpand Indicates the PW template index referenced. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.26 |
| hwPWVcSecondaryExpand Indicates whether or not the secondary PW is used. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.27 |
| hwPWVcUpTimeExpand Indicates the duration when the PW keeps Up for
the last time, in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.28 |
| hwPWOAMSyncExpand This object indicates whether OAM mapping is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.29 |
| hwPWVcPeerAddrTypeExpand Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.3 |
| hwPWVCForBfdIndexExpand The index of PW for BFD. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.30 |
| hwPWVcDelayTimeExpand The reroute delay time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.31 |
| hwPWVcReroutePolicyExpand Reroute policy. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.32 |
| hwPWVcResumeTimeExpand The reroute resume time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.33 |
| hwPWVcRerouteReasonExpand Last reroute reason. | column | HUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.34 |
| hwPWVcLastRerouteTimeExpand Last reroute time. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.35 |
| hwPWVcManualSetFaultExpand This object indicates that faults on the primary or secondary PW are manually simulated. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.36 |
| hwPWVcActiveExpand Denotes the current vc is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.37 |
| hwPWVcVrIfIndexExpand The value of this object identifies the index of the AC interface bound to a management VRRP backup group. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.38 |
| hwPWVcVrIDExpand The value of this object identifies the ID of a management VRRP backup group. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.39 |
| hwPWVcPeerAddrExpand This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcPee… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.4 |
| hwPWBFDDetectMultiplierExpand The multiple of detection time. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.40 |
| hwPWBFDMinReceiveIntervalExpand The value of this object identifies the minimum interval at which dynamic BFD packets are received. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.41 |
| hwPWDynamicBFDDetectExpand This value indicates the capacitability to support dynamic BFD detect. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.43 |
| hwPWBFDRemoteVcIDExpand The value of this object identifies the VC ID of the peer PW. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.44 |
| hwPWEthOamTypeExpand This value indicates the type of ETH OAM. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.45 |
| hwPWCfmMaIndexExpand This value indicates the current CFM MA index. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.46 |
| hwPWVcUpStartTimeExpand Specifies the time this PW status was Up(1). | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.47 |
| hwPWVcUpSumTimeExpand Indicates the accumulated time when the VC is Up,
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.48 |
| hwPWVcIfNameExpand Name of the interface (or the virtual interface)
associated with the PW. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.49 |
| hwPWVcStatusExpand Indicates the status of the PW in the local node.
Currently, can't support 'plugout'. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.5 |
| hwPWVcRowStatusExpand RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.51 |
| hwPWVcAtmPackOvertimeExpand The value of this object identifies the ATM cell encapsulation period. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.52 |
| hwPWVcPwJitterBufferDepthExpand The value of this object identifies the jitter buffer depth for TDMoPSN. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.53 |
| hwPWVcPwTdmEncapsulationNumExpand The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.54 |
| hwPWVcPwIdleCodeExpand The value of this object identifies the filling idle code used when a jitter buffer underflow occurs. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.55 |
| hwPWVcPwRtpHeaderExpand This object indicates the RTP header carried in a transparently transmitted TDM frame. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.56 |
| hwPWVcSwitchTnlPolicyNameExpand This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.57 |
| hwPWVcCfmMdIndexExpand This value indicates the current CFM MD index. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.58 |
| hwPWVcCfmMaNameExpand This value indicates the current CFM MA name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.59 |
| hwPWVcInboundLabelExpand The value of this object identifies the incoming label value of a PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.6 |
| hwPWVcCfmMdNameExpand This value indicates the current CFM MD name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.60 |
| hwPWVcRawOrTaggedExpand Specifies whether the raw or tagged is configured. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.61 |
| hwPWVcInterworkingTypeExpand Specifies the interworking type of the VC entry. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.62 |
| hwPWVcCirExpand Specifies the committed information rate, based on the VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.63 |
| hwPWVcPirExpand Specifies the peak information rate, based on the VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.64 |
| hwPWVcQosProfileExpand Specifies the QoS profile's name, based on the VC entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.65 |
| hwPWVcSwitchCirExpand Specifies the committed information rate, based on the switch VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.66 |
| hwPWVcSwitchPirExpand Specifies the peak information rate, based on the switch VC entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.67 |
| hwPWVcSwitchQosProfileExpand Specifies the QoS profile's name, based on the switch VC entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.68 |
| hwPWVcTriggerExpand Specifies whether the PW remote interface shutdown or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.69 |
| hwPWVcOutboundLabelExpand The value of this object identifies the outgoing label value of a PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.7 |
| hwPWVcEnableACOAMExpand Specifies whether ACOAM detection and notification are all enabled or not. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.70 |
| hwPWVcSwitchVrIfIndexExpand Denotes the VRRP interface the switch PW binding to. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.71 |
| hwPWVcSwitchVrIDExpand Denotes the VrID the switch PW binding to. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.72 |
| hwPWVcQosParaFromPWTExpand This object indicates the configuration of the Qos parameters managed through command line or PW template. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.73 |
| hwPWVcBfdParaFromPWTExpand This object indicates the configuration of the Bfd parameters managed through command line or PW template. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.74 |
| hwPwVcNegotiateModeExpand This object indicates the negotiation mode of the PW on the local node. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.75 |
| hwPwVcIsBypassExpand This object indicates whether the PW is the bypass PW. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.76 |
| hwPwVcIsAdminExpand This object indicates whether the PW is the administrator PW. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.77 |
| hwPwVcAdminPwIfIndexExpand This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.78 |
| hwPwVcAdminPwLinkStatusExpand This object indicates the status of the administrator PW after it is being tracked by the service PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.79 |
| hwPWVcSwitchSignExpand This object indicates the type of a switch PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.8 |
| hwPwVcSwitchAdminPwIfIndexExpand This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.80 |
| hwPwVcSwitchAdminPwLinkStatusExpand This object indicates the status of the administrator PW after it is being tracked by the switch PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.81 |
| hwPwVcSwitchBackupAdminPwIfIndexExpand This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.82 |
| hwPwVcSwitchBackupAdminPwLinkStatusExpand This object indicates the status of the administrator PW after it is being tracked by the switch backup PW. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.83 |
| hwPwVcSwitchBackupVcIdExpand This object indicates the VC ID of the switch backup PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.84 |
| hwPwVcSwitchBackupVcPeerAddrTypeExpand This object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.85 |
| hwPwVcSwitchBackupVcPeerAddrExpand This object indicates the IP address of the peer on the switch backup PW. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.86 |
| hwPwVcSwitchBackupVcReceiveLabelExpand This object indicates the inbound label of the switch backup VC.
For a static VC, the value of the inbound label ranges from 16 to 1023.
For a dynamic VC, the inbound label is aut… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.87 |
| hwPwVcSwitchBackupVcSendLabelExpand This object indicates the outbound label of the switch backup VC.
For a static VC, the value of the outbound label ranges from 0 to 1048575.
For a dynamic VC, the outbound label … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.88 |
| hwPwVcSwitchBackupVcTnlPolicyNameExpand This object indicates the name of the tunnel policy of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.89 |
| hwPWVcSwitchIDExpand Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.9 |
| hwPwVcSwitchBackupVcCirExpand This object indicates the CIR of the switch backup VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.90 |
| hwPwVcSwitchBackupVcPirExpand This object indicates the PIR of the switch backup VC. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.91 |
| hwPwVcSwitchBackupVcQosProfileExpand This object indicates the name of the QoS profile of the switch backup VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.92 |
| hwPwVcSlaveMasterModeExpand This object indicates whether the status of the VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.93 |
| hwPwVcSwitchVcSlaveMasterModeExpand This object indicates whether the status of the switch VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.94 |
| hwPwVcSwitchBackupVcSlaveMasterModeExpand This object indicates whether the status of the switch backup VC is master or slave. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.95 |
| hwPwVcSwitchVcActiveExpand This object indicates whether the status of the switch VC is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.96 |
| hwPwVcSwitchBackupVcActiveExpand This object indicates whether the status of the switch backup VC is active or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.97 |
| hwPwVcSwitchCwTransExpand This object indicates whether the SPE support Control Word Transparent or not,default is false. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.98 |
| hwPwVcSwitchVcServiceNameExpand This object indicates the service name of the switch VC. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.99 |