hwPwVcSwitchBackupVcPeerAddrType

HUAWEI-PWE3-MIB · .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85
MIB view Table view

Object

column INET-ADDRESS-MIBInetAddressType 
This object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported.

Context

MIB
HUAWEI-PWE3-MIB
OID
.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85
Type
column
Access
readonly
Status
current
Parent
hwPWVcEntry
Table
hwPWVcTable
Siblings
98

Syntax

INET-ADDRESS-MIBInetAddressType
Source
INET-ADDRESS-MIBInetAddressType
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwPWVcID
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1
hwPWVcSwitchPeerAddrType
Denotes the address type of the peer node of the switch PW. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support …
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10
hwPwVcSwitchBackupVcServiceName
This object indicates the service name of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100
hwPWVcSwitchPeerAddr
This object contain the value of the peer node address of the switch PW of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applica…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11
hwPWVcSwitchInboundLabel
The value of this object identifies the incoming label value of a switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12
hwPWVcSwitchOutboundLabel
The value of this object identifies the outgoing label value of a switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13
hwPWVcGroupID
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol',…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14
hwPWVcIfIndex
Index of the interface (or the virtual interface) associated with the PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15
hwPWVcAcStatus
Local AC status. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16
hwPWVcACOAMStatus
Denotes the AC's protocol is operational or not.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17
hwPWVcMtu
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the vir…
columnInteger32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18
hwPWVcCtrlWord
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is…
columnHUAWEI-VPLS-EXT-MIBHWEnableValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19
hwPWVcType
The type of the Virtual Circuit.This value indicate the service to be carried over this PW.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2
hwPWVcVCCV
The value of this object identifies the VCCV value of a PW.
columnBits.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20
hwPWVcBandWidth
This object indicates the bandwidth. '0' is the default value.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21
hwPWVcMaxAtmCells
Indicates the max cell supported when vc type is atm.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22
hwPWVcTnlPolicyName
Indicates the tunnel policy name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23
hwPWVcQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is implemented. Currently,can't support.Return the default value is '0'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24
hwPWVcExplicitPathName
Indicates the explicit path name set by the operator.Currently, can't support.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25
hwPWVcTemplateName
Indicates the PW template index referenced.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26
hwPWVcSecondary
Indicates whether or not the secondary PW is used.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27
hwPWVcUpTime
Indicates the duration when the PW keeps Up for the last time, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28
hwPWOAMSync
This object indicates whether OAM mapping is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29
hwPWVcPeerAddrType
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3
hwPWVCForBfdIndex
The index of PW for BFD.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30
hwPWVcDelayTime
The reroute delay time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31
hwPWVcReroutePolicy
Reroute policy.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32
hwPWVcResumeTime
The reroute resume time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33
hwPWVcRerouteReason
Last reroute reason.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34
hwPWVcLastRerouteTime
Last reroute time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35
hwPWVcManualSetFault
This object indicates that faults on the primary or secondary PW are manually simulated.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36
hwPWVcActive
Denotes the current vc is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37
hwPWVcVrIfIndex
The value of this object identifies the index of the AC interface bound to a management VRRP backup group.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38
hwPWVcVrID
The value of this object identifies the ID of a management VRRP backup group.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39
hwPWVcPeerAddr
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcPee…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4
hwPWBFDDetectMultiplier
The multiple of detection time.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40
hwPWBFDMinReceiveInterval
The value of this object identifies the minimum interval at which dynamic BFD packets are received.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41
hwPWBFDMinTransmitInterval
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42
hwPWDynamicBFDDetect
This value indicates the capacitability to support dynamic BFD detect.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43
hwPWBFDRemoteVcID
The value of this object identifies the VC ID of the peer PW.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44
hwPWEthOamType
This value indicates the type of ETH OAM.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45
hwPWCfmMaIndex
This value indicates the current CFM MA index.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46
hwPWVcUpStartTime
Specifies the time this PW status was Up(1).
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47
hwPWVcUpSumTime
Indicates the accumulated time when the VC is Up, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48
hwPWVcIfName
Name of the interface (or the virtual interface) associated with the PW.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49
hwPWVcStatus
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5
hwPWVcRowStatus
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51
hwPWVcAtmPackOvertime
The value of this object identifies the ATM cell encapsulation period.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52
hwPWVcPwJitterBufferDepth
The value of this object identifies the jitter buffer depth for TDMoPSN.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53
hwPWVcPwTdmEncapsulationNum
The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54
hwPWVcPwIdleCode
The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55
hwPWVcPwRtpHeader
This object indicates the RTP header carried in a transparently transmitted TDM frame.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56
hwPWVcSwitchTnlPolicyName
This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57
hwPWVcCfmMdIndex
This value indicates the current CFM MD index.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58
hwPWVcCfmMaName
This value indicates the current CFM MA name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59
hwPWVcInboundLabel
The value of this object identifies the incoming label value of a PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6
hwPWVcCfmMdName
This value indicates the current CFM MD name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60
hwPWVcRawOrTagged
Specifies whether the raw or tagged is configured.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61
hwPWVcInterworkingType
Specifies the interworking type of the VC entry.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62
hwPWVcCir
Specifies the committed information rate, based on the VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63
hwPWVcPir
Specifies the peak information rate, based on the VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64
hwPWVcQosProfile
Specifies the QoS profile's name, based on the VC entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65
hwPWVcSwitchCir
Specifies the committed information rate, based on the switch VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66
hwPWVcSwitchPir
Specifies the peak information rate, based on the switch VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67
hwPWVcSwitchQosProfile
Specifies the QoS profile's name, based on the switch VC entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68
hwPWVcTrigger
Specifies whether the PW remote interface shutdown or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69
hwPWVcOutboundLabel
The value of this object identifies the outgoing label value of a PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7
hwPWVcEnableACOAM
Specifies whether ACOAM detection and notification are all enabled or not.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70
hwPWVcSwitchVrIfIndex
Denotes the VRRP interface the switch PW binding to.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71
hwPWVcSwitchVrID
Denotes the VrID the switch PW binding to.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72
hwPWVcQosParaFromPWT
This object indicates the configuration of the Qos parameters managed through command line or PW template.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73
hwPWVcBfdParaFromPWT
This object indicates the configuration of the Bfd parameters managed through command line or PW template.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74
hwPwVcNegotiateMode
This object indicates the negotiation mode of the PW on the local node.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75
hwPwVcIsBypass
This object indicates whether the PW is the bypass PW.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76
hwPwVcIsAdmin
This object indicates whether the PW is the administrator PW.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77
hwPwVcAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78
hwPwVcAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the service PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79
hwPWVcSwitchSign
This object indicates the type of a switch PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8
hwPwVcSwitchAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80
hwPwVcSwitchAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the switch PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81
hwPwVcSwitchBackupAdminPwIfIndex
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82
hwPwVcSwitchBackupAdminPwLinkStatus
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83
hwPwVcSwitchBackupVcId
This object indicates the VC ID of the switch backup PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84
hwPwVcSwitchBackupVcPeerAddr
This object indicates the IP address of the peer on the switch backup PW.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86
hwPwVcSwitchBackupVcReceiveLabel
This object indicates the inbound label of the switch backup VC. For a static VC, the value of the inbound label ranges from 16 to 1023. For a dynamic VC, the inbound label is aut…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87
hwPwVcSwitchBackupVcSendLabel
This object indicates the outbound label of the switch backup VC. For a static VC, the value of the outbound label ranges from 0 to 1048575. For a dynamic VC, the outbound label …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88
hwPwVcSwitchBackupVcTnlPolicyName
This object indicates the name of the tunnel policy of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89
hwPWVcSwitchID
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9
hwPwVcSwitchBackupVcCir
This object indicates the CIR of the switch backup VC.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90
hwPwVcSwitchBackupVcPir
This object indicates the PIR of the switch backup VC.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91
hwPwVcSwitchBackupVcQosProfile
This object indicates the name of the QoS profile of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92
hwPwVcSlaveMasterMode
This object indicates whether the status of the VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93
hwPwVcSwitchVcSlaveMasterMode
This object indicates whether the status of the switch VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94
hwPwVcSwitchBackupVcSlaveMasterMode
This object indicates whether the status of the switch backup VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95
hwPwVcSwitchVcActive
This object indicates whether the status of the switch VC is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96
hwPwVcSwitchBackupVcActive
This object indicates whether the status of the switch backup VC is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97
hwPwVcSwitchCwTrans
This object indicates whether the SPE support Control Word Transparent or not,default is false.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98
hwPwVcSwitchVcServiceName
This object indicates the service name of the switch VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99