hwPWTemplateName

HUAWEI-PWE3-MIB · .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1
MIB view Table view

Object

column OctetString 
The name of the PW template.
Set by the operator to indicate the protocol responsible  
for establishing this PW. The value 'static' is used in all 
cases where no maintenance protocol (PW signaling) is used  
to set-up the PW, i.e. require configuration of entries in 
the PW tables including PW labels, etc. The value 'ldp' is 
used in case of signaling with the PWid FEC element with LDP 
signaling. The value 'rsvp' indicate the use of rsvp  
control protocol.

Context

MIB
HUAWEI-PWE3-MIB
OID
.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1
Type
column
Access
notifyonly
Status
current
Parent
hwPWTemplateEntry
Table
hwPWTemplateTable
Siblings
25

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-19

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwPWTemplateExplicitPathName
Indicates the explicit path name set by the operator.Currently, can't support.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10
hwPWTemplateBFDDetectMultiplier
The multiple of detection time.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11
hwPWTemplateBFDMinReceiveInterval
The interval of bfd messages to be received.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12
hwPWTemplateBFDMinTransmitInterval
The interval of bfd messages to be sent.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13
hwPWTemplateDynamicBFDDetect
This value indicates the capacitability to support dynamic BFD detect.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14
hwPWTemplateMaxAtmCells
Specifies the MaxAtmCells.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15
hwPWTemplateAtmPackOvertime
Specifies the AtmPackOvertime.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16
hwPWTemplatePwJitterBufferDepth
Specifies the PwJitterBufferDepth.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17
hwPWTemplatePwTdmEncapsulationNum
Specifies the PwTdmEncapsulationNum.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18
hwPWTemplatePwIdleCode
Specifies the PwIdleCode.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19
hwPWTemplatePeerAddrType
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2
hwPWTemplatePwRtpHeader
Specifies the PwRtpHeader.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20
hwPWTemplatePwCCSeqEnable
Specifies the CC Sequence is enable or not.
columnHUAWEI-VPLS-EXT-MIBHWEnableValue.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21
hwPWTemplateCir
Specifies the committed information rate, based on the PW template entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22
hwPWTemplatePir
Specifies the peak information rate, based on the PW template entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23
hwPWTemplateQosProfile
Specifies the QoS profile's name, based on the PW template entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24
hwPWTemplateFlowLabel
The value of this object identifies whether the PW FlowLabel is enabled.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25
hwPWTemplatePeerAddr
This object contain the value of the peer node address of the PW/PE maintenance protocol entity.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3
hwPWTemplateCtrlword
Indicates the control word capability of the switch PW.
columnHUAWEI-VPLS-EXT-MIBHWEnableValue.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4
hwPWTemplateVCCV
Indicates the optional VCCV capabilities of the PW template. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) …
columnBits.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5
hwPWTemplateRowStatus
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51
hwPWTemplateFrag
Indicates whether or not fragmentaion is supported.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6
hwPWTemplateBandwidth
Indicates the bandwitdh when signaling protocol is rsvp. Currently, can't support.'0' is the default value.
columnInteger32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7
hwPWTemplateTnlPolicyName
Indicates the tunnel policy name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8
hwPWTemplateQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is implemented.Currently, can't support.'0' is the default value.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9