hwSvcPeerAddr

HUAWEI-PWE3-MIB · .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5
MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress 
This object contain the value of the peer node address 
of the PW/PE maintenance protocol entity. This object  
SHOULD contain a value of all zeroes if not applicable  
(hwSvcPeerAddrType is 'unknown').

Context

MIB
HUAWEI-PWE3-MIB
OID
.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5
Type
column
Access
readwrite
Status
current
Parent
hwSvcEntry
Table
hwSvcTable
Siblings
42

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwSvcIfIndex
Index of the interface (or the virtual interface) associated with the PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1
hwSvcAcStatus
Local AC status. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10
hwSvcACOAMStatus
Denotes the AC's protocol is operational or not.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11
hwSvcMtu
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the vir…
columnInteger32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12
hwSvcCtrlWord
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is…
columnHUAWEI-VPLS-EXT-MIBHWEnableValue.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13
hwSvcVCCV
Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) or ccAlert(1)|cv…
columnBits.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14
hwSvcBandWidth
This object indicates the bandwidth.Currently, can't support.'0' is the default value.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15
hwSvcMaxAtmCells
Indicates the max cell supported when vc type is atm.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16
hwSvcTnlPolicyName
Indicates the tunnel policy name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17
hwSvcQoSBehaviorIndex
Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18
hwSvcPWTemplateName
Indicates the PW template index referenced.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19
hwSvcID
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2
hwSvcUpTime
Indicates the duration when the SVC keeps Up for the last time, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20
hwSvcOAMSync
Denotes the AC and PSN are enable or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21
hwSvcForBfdIndex
The index of PW for BFD.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22
hwSvcSecondary
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23
hwSvcDelayTime
The reroute delay time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24
hwSvcReroutePolicy
Reroute policy.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25
hwSvcResumeTime
The reroute resume time.Currently, can't support.Return the default value is '0'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26
hwSvcRerouteReason
Last reroute reason.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27
hwSvcLastRerouteTime
Last reroute time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28
hwSvcManualSetFault
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29
hwSvcType
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3
hwSvcActive
Denotes the current vc is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30
hwSvcUpStartTime
Specifies the time this PW status was Up(1).
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31
hwSvcUpSumTime
Indicates the accumulated time when the SVC is Up, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32
hwSvcAtmPackOvertime
Specifies the AtmPackOvertime.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33
hwSvcPwJitterBufferDepth
Specifies the PwJitterBufferDepth.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34
hwSvcPwTdmEncapsulationNum
Specifies the PwTdmEncapsulationNum.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35
hwSvcPwIdleCode
Specifies the PwIdleCode.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36
hwSvcPwRtpHeader
Specifies the PwRtpHeader.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37
hwSvcRawOrTagged
Specifies whether the VLAN tag of the SVC entry is attached or stripped.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38
hwSvcInterworkingType
Specifies the interworking type of the SVC entry.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39
hwSvcPeerAddrType
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4
hwSvcCir
Specifies the committed information rate, based on the SVC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40
hwSvcPir
Specifies the peak information rate, based on the SVC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41
hwSvcQosProfile
Specifies the QoS profile's name, based on the SVC entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42
hwSvcRowStatus
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51
hwSvcStatus
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6
hwSvcInboundLabel
This object indicates the inbound label.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7
hwSvcOutboundLabel
This object indicates the outbound label.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8
hwSvcGroupID
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if SvcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9