hwPWVcMtuExpand

HUAWEI-PWE3-MIB · .1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.18
MIB view Table view

Object

column r/w Integer32 
If not equal zero, the optional Mtu object in the  
signaling protocol will be sent with this value,  
representing the locally supported MTU size over the  
interface (or the virtual interface) associated with the  
PW.

Context

MIB
HUAWEI-PWE3-MIB
OID
.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.18
Type
column
Access
readwrite
Status
current
Parent
hwPWVcExpandEntry
Table
hwPWVcExpandTable
Siblings
98

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-0 range: 46-9600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwPWVcIDExpand
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.1
hwPWVcSwitchPeerAddrTypeExpand
Denotes the address type of the peer node of the switch PW. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support …
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.10
hwPwVcSwitchBackupVcServiceNameExpand
This object indicates the service name of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.100
hwPWVcSwitchPeerAddrExpand
This object contain the value of the peer node address of the switch PW of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applica…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.11
hwPWVcSwitchInboundLabelExpand
The value of this object identifies the incoming label value of a switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.12
hwPWVcSwitchOutboundLabelExpand
The value of this object identifies the outgoing label value of a switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.13
hwPWVcGroupIDExpand
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol',…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.14
hwPWVcIfIndexExpand
Index of the interface (or the virtual interface) associated with the PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.15
hwPWVcAcStatusExpand
Local AC status. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.16
hwPWVcACOAMStatusExpand
Denotes the AC's protocol is operational or not.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.17
hwPWVcCtrlWordExpand
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is…
columnHUAWEI-VPLS-EXT-MIBHWEnableValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.19
hwPWVcTypeExpand
The type of the Virtual Circuit.This value indicate the service to be carried over this PW.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnVcEncapsType.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.2
hwPWVcVCCVExpand
The value of this object identifies the VCCV value of a PW.
columnBits.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.20
hwPWVcBandWidthExpand
This object indicates the bandwidth. '0' is the default value.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.21
hwPWVcMaxAtmCellsExpand
Indicates the max cell supported when vc type is atm.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.22
hwPWVcTnlPolicyNameExpand
Indicates the tunnel policy name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.23
hwPWVcQoSBehaviorIndexExpand
Indicates the traffic behavior Index when QOS is implemented. Currently,can't support.Return the default value is '0'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.24
hwPWVcExplicitPathNameExpand
Indicates the explicit path name set by the operator.Currently, can't support.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.25
hwPWVcTemplateNameExpand
Indicates the PW template index referenced.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.26
hwPWVcSecondaryExpand
Indicates whether or not the secondary PW is used.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.27
hwPWVcUpTimeExpand
Indicates the duration when the PW keeps Up for the last time, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.28
hwPWOAMSyncExpand
This object indicates whether OAM mapping is enabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.29
hwPWVcPeerAddrTypeExpand
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.3
hwPWVCForBfdIndexExpand
The index of PW for BFD.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.30
hwPWVcDelayTimeExpand
The reroute delay time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.31
hwPWVcReroutePolicyExpand
Reroute policy.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.32
hwPWVcResumeTimeExpand
The reroute resume time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.33
hwPWVcRerouteReasonExpand
Last reroute reason.
columnHUAWEI-VPLS-EXT-MIBHWL2VpnStateChangeReason.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.34
hwPWVcLastRerouteTimeExpand
Last reroute time.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.35
hwPWVcManualSetFaultExpand
This object indicates that faults on the primary or secondary PW are manually simulated.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.36
hwPWVcActiveExpand
Denotes the current vc is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.37
hwPWVcVrIfIndexExpand
The value of this object identifies the index of the AC interface bound to a management VRRP backup group.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.38
hwPWVcVrIDExpand
The value of this object identifies the ID of a management VRRP backup group.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.39
hwPWVcPeerAddrExpand
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcPee…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.4
hwPWBFDDetectMultiplierExpand
The multiple of detection time.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.40
hwPWBFDMinReceiveIntervalExpand
The value of this object identifies the minimum interval at which dynamic BFD packets are received.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.41
hwPWBFDMinTransmitIntervalExpand
The value of this object identifies the minimum interval at which dynamic BFD packets are sent.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.42
hwPWDynamicBFDDetectExpand
This value indicates the capacitability to support dynamic BFD detect.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.43
hwPWBFDRemoteVcIDExpand
The value of this object identifies the VC ID of the peer PW.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.44
hwPWEthOamTypeExpand
This value indicates the type of ETH OAM.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.45
hwPWCfmMaIndexExpand
This value indicates the current CFM MA index.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.46
hwPWVcUpStartTimeExpand
Specifies the time this PW status was Up(1).
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.47
hwPWVcUpSumTimeExpand
Indicates the accumulated time when the VC is Up, in seconds.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.48
hwPWVcIfNameExpand
Name of the interface (or the virtual interface) associated with the PW.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.49
hwPWVcStatusExpand
Indicates the status of the PW in the local node. Currently, can't support 'plugout'.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.5
hwPWVcRowStatusExpand
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.51
hwPWVcAtmPackOvertimeExpand
The value of this object identifies the ATM cell encapsulation period.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.52
hwPWVcPwJitterBufferDepthExpand
The value of this object identifies the jitter buffer depth for TDMoPSN.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.53
hwPWVcPwTdmEncapsulationNumExpand
The value of this object identifies the number of TDM frames encapsulated in a TDMoPSN packet.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.54
hwPWVcPwIdleCodeExpand
The value of this object identifies the filling idle code used when a jitter buffer underflow occurs.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.55
hwPWVcPwRtpHeaderExpand
This object indicates the RTP header carried in a transparently transmitted TDM frame.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.56
hwPWVcSwitchTnlPolicyNameExpand
This object indicates the tunnel policy name for the tunnel to which a switch PW is iterated.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.57
hwPWVcCfmMdIndexExpand
This value indicates the current CFM MD index.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.58
hwPWVcCfmMaNameExpand
This value indicates the current CFM MA name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.59
hwPWVcInboundLabelExpand
The value of this object identifies the incoming label value of a PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.6
hwPWVcCfmMdNameExpand
This value indicates the current CFM MD name used.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.60
hwPWVcRawOrTaggedExpand
Specifies whether the raw or tagged is configured.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.61
hwPWVcInterworkingTypeExpand
Specifies the interworking type of the VC entry.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.62
hwPWVcCirExpand
Specifies the committed information rate, based on the VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.63
hwPWVcPirExpand
Specifies the peak information rate, based on the VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.64
hwPWVcQosProfileExpand
Specifies the QoS profile's name, based on the VC entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.65
hwPWVcSwitchCirExpand
Specifies the committed information rate, based on the switch VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.66
hwPWVcSwitchPirExpand
Specifies the peak information rate, based on the switch VC entry.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.67
hwPWVcSwitchQosProfileExpand
Specifies the QoS profile's name, based on the switch VC entry.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.68
hwPWVcTriggerExpand
Specifies whether the PW remote interface shutdown or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.69
hwPWVcOutboundLabelExpand
The value of this object identifies the outgoing label value of a PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.7
hwPWVcEnableACOAMExpand
Specifies whether ACOAM detection and notification are all enabled or not.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.70
hwPWVcSwitchVrIfIndexExpand
Denotes the VRRP interface the switch PW binding to.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.71
hwPWVcSwitchVrIDExpand
Denotes the VrID the switch PW binding to.
columnUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.72
hwPWVcQosParaFromPWTExpand
This object indicates the configuration of the Qos parameters managed through command line or PW template.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.73
hwPWVcBfdParaFromPWTExpand
This object indicates the configuration of the Bfd parameters managed through command line or PW template.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.74
hwPwVcNegotiateModeExpand
This object indicates the negotiation mode of the PW on the local node.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.75
hwPwVcIsBypassExpand
This object indicates whether the PW is the bypass PW.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.76
hwPwVcIsAdminExpand
This object indicates whether the PW is the administrator PW.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.77
hwPwVcAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.78
hwPwVcAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the service PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.79
hwPWVcSwitchSignExpand
This object indicates the type of a switch PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.8
hwPwVcSwitchAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.80
hwPwVcSwitchAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the switch PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.81
hwPwVcSwitchBackupAdminPwIfIndexExpand
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.82
hwPwVcSwitchBackupAdminPwLinkStatusExpand
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.83
hwPwVcSwitchBackupVcIdExpand
This object indicates the VC ID of the switch backup PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.84
hwPwVcSwitchBackupVcPeerAddrTypeExpand
This object indicates type of the IP address of the peer on the switch backup PW. Currently, only IPv4 addresss are supported.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.85
hwPwVcSwitchBackupVcPeerAddrExpand
This object indicates the IP address of the peer on the switch backup PW.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.86
hwPwVcSwitchBackupVcReceiveLabelExpand
This object indicates the inbound label of the switch backup VC. For a static VC, the value of the inbound label ranges from 16 to 1023. For a dynamic VC, the inbound label is aut…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.87
hwPwVcSwitchBackupVcSendLabelExpand
This object indicates the outbound label of the switch backup VC. For a static VC, the value of the outbound label ranges from 0 to 1048575. For a dynamic VC, the outbound label …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.88
hwPwVcSwitchBackupVcTnlPolicyNameExpand
This object indicates the name of the tunnel policy of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.89
hwPWVcSwitchIDExpand
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.9
hwPwVcSwitchBackupVcCirExpand
This object indicates the CIR of the switch backup VC.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.90
hwPwVcSwitchBackupVcPirExpand
This object indicates the PIR of the switch backup VC.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.91
hwPwVcSwitchBackupVcQosProfileExpand
This object indicates the name of the QoS profile of the switch backup VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.92
hwPwVcSlaveMasterModeExpand
This object indicates whether the status of the VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.93
hwPwVcSwitchVcSlaveMasterModeExpand
This object indicates whether the status of the switch VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.94
hwPwVcSwitchBackupVcSlaveMasterModeExpand
This object indicates whether the status of the switch backup VC is master or slave.
columnEnumeration.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.95
hwPwVcSwitchVcActiveExpand
This object indicates whether the status of the switch VC is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.96
hwPwVcSwitchBackupVcActiveExpand
This object indicates whether the status of the switch backup VC is active or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.97
hwPwVcSwitchCwTransExpand
This object indicates whether the SPE support Control Word Transparent or not,default is false.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.98
hwPwVcSwitchVcServiceNameExpand
This object indicates the service name of the switch VC.
columnOctetString.1.3.6.1.4.1.2011.5.25.119.4.1.8.1.1.99