hwPWTemplateBFDDetectMultiplier
HUAWEI-PWE3-MIB ·
.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11
Object
column
r/w
Unsigned32
The multiple of detection time.
Context
- MIB
- HUAWEI-PWE3-MIB
- OID
.1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwPWTemplateEntry
- Table
- hwPWTemplateTable
- Siblings
- 25
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-0
range: 3-50
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPWTemplateName The name of the PW template.
Set by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance pro… | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1 |
| hwPWTemplateExplicitPathName Indicates the explicit path name set by the operator.Currently, can't support. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10 |
| hwPWTemplateBFDMinReceiveInterval The interval of bfd messages to be received. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12 |
| hwPWTemplateBFDMinTransmitInterval The interval of bfd messages to be sent. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13 |
| hwPWTemplateDynamicBFDDetect This value indicates the capacitability to support dynamic BFD detect. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14 |
| hwPWTemplateMaxAtmCells Specifies the MaxAtmCells. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15 |
| hwPWTemplateAtmPackOvertime Specifies the AtmPackOvertime. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16 |
| hwPWTemplatePwJitterBufferDepth Specifies the PwJitterBufferDepth. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17 |
| hwPWTemplatePwTdmEncapsulationNum Specifies the PwTdmEncapsulationNum. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18 |
| hwPWTemplatePwIdleCode Specifies the PwIdleCode. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19 |
| hwPWTemplatePeerAddrType Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2 |
| hwPWTemplatePwRtpHeader Specifies the PwRtpHeader. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20 |
| hwPWTemplatePwCCSeqEnable Specifies the CC Sequence is enable or not. | column | HUAWEI-VPLS-EXT-MIBHWEnableValue | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21 |
| hwPWTemplateCir Specifies the committed information rate, based on the PW template entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22 |
| hwPWTemplatePir Specifies the peak information rate, based on the PW template entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23 |
| hwPWTemplateQosProfile Specifies the QoS profile's name, based on the PW template entry. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24 |
| hwPWTemplateFlowLabel The value of this object identifies whether the PW FlowLabel is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25 |
| hwPWTemplatePeerAddr This object contain the value of the peer node address
of the PW/PE maintenance protocol entity. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3 |
| hwPWTemplateCtrlword Indicates the control word capability of the switch PW. | column | HUAWEI-VPLS-EXT-MIBHWEnableValue | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4 |
| hwPWTemplateVCCV Indicates the optional VCCV capabilities of the PW template.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) … | column | Bits | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5 |
| hwPWTemplateRowStatus RowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51 |
| hwPWTemplateFrag Indicates whether or not fragmentaion is supported. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6 |
| hwPWTemplateBandwidth Indicates the bandwitdh when signaling protocol is rsvp.
Currently, can't support.'0' is the default value. | column | Integer32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7 |
| hwPWTemplateTnlPolicyName Indicates the tunnel policy name used. | column | OctetString | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8 |
| hwPWTemplateQoSBehaviorIndex Indicates the traffic behavior Index when QOS is
implemented.Currently, can't support.'0' is the default value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9 |