TN-IEEE8021-CFM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
14
Rows
14
Columns
100
tnDot1agCfmStackTable
table.1.3.6.1.4.1.7483.6.1.2.52.1.2
·
1 row entry
·
9 columns
There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface.
The Stack table entry
Indexes
tnDot1agCfmStackifIndex tnDot1agCfmStackVlanIdOrNone tnDot1agCfmStackMdLevel tnDot1agCfmStackDirection
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmStackifIndex
This object represents the Bridge Port or aggregated port
on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and … |
IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.1 |
||||||||||
|
tnDot1agCfmStackVlanIdOrNone
VLAN ID to which the MP is attached, or 0, if none.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.2 |
||||||||||
|
tnDot1agCfmStackMdLevel
MD Level of the Maintenance Point.
|
IEEE8021-CFM-MIBDot1agCfmMDLevel Textual Convention: IEEE8021-CFM-MIBDot1agCfmMDLevel Integer32Type Constraints: range: 0..7 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.3 |
||||||||||
|
tnDot1agCfmStackDirection
Direction in which the MP faces on the Bridge Port
|
IEEE8021-CFM-MIBDot1agCfmMpDirection Textual Convention: IEEE8021-CFM-MIBDot1agCfmMpDirection EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.4 |
||||||||||
|
tnDot1agCfmStackMdIndex
The index of the Maintenance Domain in the dot1agCfmMdTable
to which the MP is associated, or 0, if none. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.5 |
||||||||||
|
tnDot1agCfmStackMaIndex
The index of the MA in the dot1agCfmMaNetTable and
dot1agCfmMaCompTable to which the MP is associated, or 0, if none. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.6 |
||||||||||
|
tnDot1agCfmStackMepId
If an MEP is configured, the MEPID, else 0
|
IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepIdOrZero Unsigned32Type Constraints: range: 0..8191 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.7 |
||||||||||
|
tnDot1agCfmStackMacAddress
MAC address of the MP.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.8 |
||||||||||
|
tnDot1agCfmStackMPType
The value of tnDot1agCfmStackMPType indicates the entity that the
MP is configured on: sap(1) MP is configured on a SAP ethTun(2) MP is configured on an ethernet-tunnel |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.1.2.1.9 |
.1.3.6.1.4.1.7483.6.1.2.52.2.1
·
1 row entry
·
2 columns
A row in the tnDot1agCfmMcLagConfigTable indicates whether a Mc Lag is in Active Standby or not and what the Hold Time will be.
The Cfm entry for MC LAG
Indexes
TROPIC-SYSTEM-MIBtnSysSwitchId
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tnDot1agCfmMcLagConfigStdbyInactive
The value of tnDot1agCfmMcLagConfigStdbyInactive specifies whether or not
ETH-CFM MEPs configured on Multi-Chassis LAG ports are aware of MC-LAG port active/standby states. When this object is 'true (1)',… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.2.1.1.1 |
||||
|
tnDot1agCfmMcLagConfigPropHoldTime
The value of tnDot1agCfmMcLagConfigPropHoldTime specifies the duration, in
seconds, of a timer that is activated when an MC-LAG port or protocol changes state. While the timer is active, no fault set or clear is propaga… |
secondsUnsigned32r/w Constraints: range: 0-60 |
.1.3.6.1.4.1.7483.6.1.2.52.2.1.1.2 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1
·
1 row entry
·
5 columns
The tnDot1agCfmComponentLimitTable stores the current resource counts as well as their resource limits for Ethernet Connectivity Fault Management (ETH-CFM) components in the SROS series system.
The tnDot1agCfmComponentLimitEntry consists of the resource limits
for a particular component of ETH-CFM.
Rows are managed by the system and can not be created or destroyed using
SNMP set requests.
for a particular component of ETH-CFM.
Rows are managed by the system and can not be created or destroyed using
SNMP set requests.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
tnDot1agCfmCompMajorIndex
The value of tnDot1agCfmCompMajorIndex specifies the major identifier
of the ETH-CFM component. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1.1.1 |
|
tnDot1agCfmCompMinorIndex
The value of tnDot1agCfmCompMinorIndex specifies the minor identifier
of the ETH-CFM component. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1.1.2 |
|
tnDot1agCfmCompName
The value of tnDot1agCfmCompName indicates the name of the ETH-CFM
component. |
TN-TC-MIBTNamedItem Textual Convention: TN-TC-MIBTNamedItem OctetStringType Constraints: range: 1..32 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1.1.3 |
|
tnDot1agCfmCompResourceUsage
The value of tnDot1agCfmCompResourceUsage indicates the current
resource usage for the ETH-CFM component. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1.1.4 |
|
tnDot1agCfmCompResourceLimit
The value of tnDot1agCfmCompResourceLimit indicates the maximum
resource usage limit for the ETH-CFM component for the SROS series system. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.2.3.1.1.5 |
tnDot1agCfmMaNetTable
table.1.3.6.1.4.1.7483.6.1.2.52.6.1
·
1 row entry
·
1 columns
The tnDot1agCfmMaNetTable AUGMENTS the standard MIB table, dot1agCfmMaNetTable. This table is used to enhance Maintenance Association functionality for Ethernet Connectivity Fault Management (ETH-CFM).
The tnDot1agCfmMaNetEntry consists of the configuration objects
used to enhance the Maintenance Association functionality.
used to enhance the Maintenance Association functionality.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
tnDot1agCfmMaNetTotalMEPCount
The value of tnDot1agCfmMaNetTotalMEPCount indicates the number of
unique MEPs configured (both local and remote) that are associated with this MA. When the number of MEPs exceed the normal MA limits, the… |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.6.1.1.1 |
.1.3.6.1.4.1.7483.6.1.2.52.6.3
·
1 row entry
·
2 columns
The tnDot1agCfmMaMepListTable extends the functionality of the dot1agCfmMaMepListTable.
The tnDot1agCfmMaMepListEntry augments the standard MIB entry
for the purpose of extending functionality for Dot1ag CFM MEP Lists.
Rows are created and destroyed by the system through the row status
field in dot1agCfmMa…
for the purpose of extending functionality for Dot1ag CFM MEP Lists.
Rows are created and destroyed by the system through the row status
field in dot1agCfmMa…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmMaMepListMacAddress
The value of tnDot1agCfmMaMepListMacAddress specifies the target
unicast MAC address used for transmitting CFM packets to the remote MEPs for the specified MEPID. Setting a unicast MAC address restricts t… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.6.3.1.1 |
||||||
|
tnDot1agCfmMaMepListSapSubType
The value of tnDot1agCfmMaMepListSapSubType specifies the SAP
sub type of the remote MEP for the specified MEPID. This is used to ensure that LLF shutdown is based only on remote etree-root SAP faults and… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.6.3.1.2 |
tnDot1agCfmMepTable
table.1.3.6.1.4.1.7483.6.1.2.52.7.1
·
1 row entry
·
30 columns
This table augments the Maintenance Association End Point (MEP) table of the IEEE8021-CFM-MIB.
A conceptual row in the tnDot1agCfmMepTable. This row exists only
if the association dot1agCfmMepEntry is active.
if the association dot1agCfmMepEntry is active.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmMepSdpId
The value of tnDot1agCfmMepSdpId specifies, along with the
tnDot1agCfmMepVcId, the SDP-Binding within a bridge port, to which the MEP is attached. This object is applicable to SDP-Bindings only, and MUST … |
TN-SERV-MIBSdpIdr/w Textual Convention: TN-SERV-MIBSdpId Unsigned32Type Constraints: range: 0..17407 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.1 |
||||||||||||||
|
tnDot1agCfmMepVcId
The value of tnDot1agCfmMepVcId specifies, along with
tnDot1agCfmMepSdpId, the SDP Binding for the bridge. tnDot1agCfmMepVcId is applicable to SDP-Bindings only, and MUST be set to zero (0) when dot1agCfm… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.2 |
||||||||||||||
|
tnDot1agCfmMepMacAddress
The value of tnDot1agCfmMepMacAddress specifies the mac-address
that is assigned to dot1agCfmMepMacAddress. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.3 |
||||||||||||||
|
tnDot1agCfmMepAisEnable
The value of tnDot1agCfmMepAisEnable specifies whether AIS
frames are generated from the Maintenance Entity Group (MEG). |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.4 |
||||||||||||||
|
tnDot1agCfmMepAisMegLevel
The value of tnDot1agCfmMepAisMegLevel specifies the levels
that should be notified to suppress alarms resulting from defect conditions detected by the MEP. |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.5 |
||||||||||||||
|
tnDot1agCfmMepAisPriority
The value of tnDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.6 |
||||||||||||||
|
tnDot1agCfmMepAisInterval
The value of tnDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames. |
secondsUnsigned32r/w Constraints: range: 60-60range: 1-1 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.7 |
||||||||||||||
|
tnDot1agCfmMepEthRxAisInterval
The value of tnDot1agCfmMepEthRxAisInterval indicates the AIS Interval
received in the last AIS Frame. |
secondsUnsigned32 Constraints: range: 60-60range: 1-1 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.8 |
||||||||||||||
|
tnDot1agCfmMepEthRxAis
The value of tnDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.9 |
||||||||||||||
|
tnDot1agCfmMepEthAisTxCount
The value of tnDot1agCfmMepEthAisTxCount indicates number of
AIS frames transmitted on the MEP. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.10 |
||||||||||||||
|
tnDot1agCfmMepEthTestEnable
The value of tnDot1agCfmMepEthTestEnable specifies whether
ethernet test frames are to be generated on transmission or processed on reception. If this object is set to 'false', then tnDot1agCfmMepEthTestPattern is undef… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.11 |
||||||||||||||
|
tnDot1agCfmMepEthTestPattern
The value of tnDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)' specifies the data content as all zero values (without and with CRC calculations res… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.12 |
||||||||||||||
|
tnDot1agCfmMepEthTestMacAddr
The value of tnDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent. Setting this object will trigger the test frame to be sent. Once the test is complet… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.13 |
||||||||||||||
|
tnDot1agCfmMepEthTestDataLen
The value of tnDot1agCfmMepEthTestDataLen specifies the length of the data
sent in an Eth-test frame. The contents of the data is specified by the tnDot1agCfmMepEthTestPattern object. |
Unsigned32r/w Constraints: range: 64-1500 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.14 |
||||||||||||||
|
tnDot1agCfmMepEthTestPriority
The value of tnDot1agCfmMepEthTestPriority specifies the priority used
in generating Eth-Test frames. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.15 |
||||||||||||||
|
tnDot1agCfmMepOWDTMacAddress
The value of tnDot1agCfmMepOWDTMacAddress specifies the MAC address used
as a target for the One-Way-Delay Test (OWDT). Setting this object will trigger a One-Way-Delay test to the specified MAC address. … |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.16 |
||||||||||||||
|
tnDot1agCfmMepOWDTPriority
The value of tnDot1agCfmMepOWDTPriority specifies the priority used in
the generated test frame for the One-Way-Delay test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.17 |
||||||||||||||
|
tnDot1agCfmMepTWDTMacAddress
The value of tnDot1agCfmMepTWDTMacAddress specifies the MAC address used
as a target for the Two-Way-Delay Test (TWDT). Setting this object will trigger a Two-Way-Delay test to the specified MAC address. … |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.18 |
||||||||||||||
|
tnDot1agCfmMepTWDTPriority
The value of tnDot1agCfmMepTWDTPriority specifies the priority used in
the generated test frame for the Two-Way-Delay test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.19 |
||||||||||||||
|
tnDot1agCfmMepSvcId
The value of tnDot1agCfmMepSvcId specifies the service that the virtual
MEP is being created in. tnDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST be set to zero (0) when dot1agCfmMepIfInde… |
TN-TC-MIBTmnxServIdr/w Textual Convention: TN-TC-MIBTmnxServId Unsigned32Type Constraints: range: 0..2147483650 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.20 |
||||||||||||||
|
tnDot1agCfmMepControlMep
The value of tnDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over which this MEP is configured. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.21 |
||||||||||||||
|
tnDot1agCfmMepEthTestThreshold
The value of tnDot1agCfmMepEthTestThreshold specifies when a
tnDot1agCfmMepEthTestComplete notification is sent. If tnDot1agCfmMepEthTestThreshold is set to zero (0), a notification is sent on the completion of any test… |
bit-errorsUnsigned32r/w Constraints: range: 0-11840 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.22 |
||||||||||||||
|
tnDot1agCfmMepOWDTThreshold
The value of tnDot1agCfmMepOWDTThreshold specifies when a
tnDot1agCfmMepDMTestComplete notification is sent for a one-way-delay test. If tnDot1agCfmMepOWDTThreshold is set to zero (0), a notification is sent on the comp… |
secondsUnsigned32r/w Constraints: range: 0-600 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.23 |
||||||||||||||
|
tnDot1agCfmMepMcLagInactive
The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The value of tmnxDot1agCfmMcLagStdbyInactive must be set to 'true (1)' for this o… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.24 |
||||||||||||||
|
tnDot1agCfmMepTWDTDataSize
The value of tnDot1agCfmMepTWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the Two-Way delay test. A value of zero (0) specifies that no padding TLV is inserted in the packet. Any non-ze… |
bytesUnsigned32r/w Constraints: range: 0-9542 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.25 |
||||||||||||||
|
tnDot1agCfmMepTransmitLbmDataTlvSize
The value of tnDot1agCfmMepTransmitLbmDataTlvSize specifies
the data size, in bytes, contained in the padding TLV for the LBM test. A value of zero (0) specifies that no padding TLV is inserted in the packet. Any non-… |
bytesUnsigned32r/w Constraints: range: 0-9570 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.26 |
||||||||||||||
|
tnDot1agCfmMepType
The value of tmnxDot1agCfmMepType specifies the endpoint type that
this MEP facilitates. default (0) -- implements a traditional MEP. facilityPort (1) -- implements a facility port/LAG level MEP. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.27 |
||||||||||||||
|
tnDot1agCfmMepFaultPropagation
The value of tnDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service containing the MEP. It also specifies if the MEP should propagate a fault that it has d… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.28 |
||||||||||||||
|
tnDot1agCfmMepOWDTDataSize
The value of tnDot1agCfmMepOWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the one-Way delay test. A value of zero (0) specifies that no padding TLV is inserted in the packet. Any non-ze… |
bytesUnsigned32r/w Constraints: range: 0-9542 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.29 |
||||||||||||||
|
tnDot1agCfmMepAlmProfName
.
|
OctetStringr/w Constraints: range: 1-40 |
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.30 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3
·
1 row entry
·
8 columns
The tnDot1agCfmMepDelayRsltTable indicates the results of
all the One-Way/Two-Way Delay Tests from the originating MAC
addresses.
This table is not persistent over reboots of the chassis.
The MEG result table.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier tnDot1agCfmMepDelaySrcMacAddr tnDot1agCfmMepDelayTestType
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tnDot1agCfmMepDelaySrcMacAddr
The value of tnDot1agCfmMepDelaySrcMacAddr indicates the source
MAC address of the issuer of the test. |
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.1 |
||||
|
tnDot1agCfmMepDelayTestType
The value of tnDot1agCfmMepDelayTestType indicates the type
of test this row details. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.2 |
||||
|
tnDot1agCfmMepDelayTestDelay
The value of tnDot1agCfmMepDelayTestDelay indicates the amount
of time, measured in microseconds, from when the test-frame was transmitted to the time it was received minus the local processing time taken by the remote … |
microsecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.3 |
||||
|
tnDot1agCfmMepDelayVariation
The value of tnDot1agCfmMepDelayVariation indicates the amount
of time delay variation, measured in microseconds, from the two most recent time delay measurements. Bi-direction test delay variation for tw… |
microsecondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.4 |
||||
|
tnDot1agCfmMepDelayNearEndTestDelay
Near end test delay for oneWayTest.
|
microsecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.5 |
||||
|
tnDot1agCfmMepDelayNearEndVariation
Near end test delay variation for oneWayTest.
|
microsecondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.6 |
||||
|
tnDot1agCfmMepDelayFarEndTestDelay
Far end test delay for oneWayTest
|
microsecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.7 |
||||
|
tnDot1agCfmMepDelayFarEndVariation
Far end test delay variation for oneWayTest.
|
microsecondsSNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.3.1.8 |
tnDot1agCfmMepCsfTable
table.1.3.6.1.4.1.7483.6.1.2.52.7.4
·
1 row entry
·
3 columns
This table augments the Maintenance Association End Point (MEP) table of the IEEE8021-CFM-MIB.
A conceptual row in the tnDot1agCfmMepCsfTable. This row exists only
if the association dot1agCfmMepEntry is active.
if the association dot1agCfmMepEntry is active.
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmMepCsfInterval
Interval between CSF transmissions to be used in the MEP.
|
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmCcmInterval EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.4.1.1 |
||||||||||||||||
|
tnDot1agCfmMepCsfDirection
CSF transmissions direction in the MEP
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.4.1.2 |
||||||||||||||||
|
tnDot1agCfmMepCsfPriority
The priority value for CSFs transmitted by the MEP.
Default Value is the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The management entity can obtain the default value for t… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.4.1.3 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5
·
1 row entry
·
10 columns
tnDot1agCfmMepSlmTWTestTable consists of the MEP configuration for issuing individual Synthetic Loss Measurement tests.
tnDot1agCfmMepSlmTWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with…
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmMepSlmTWTestStatus
The value of tnDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test. To issue a two-way SLM test the user must issue an SNMP SET on this object … |
TN-TC-MIBTmnxEnabledDisabledr/w Textual Convention: TN-TC-MIBTmnxEnabledDisabled EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.1 |
||||||
|
tnDot1agCfmMepSlmTWTestId
The value of tnDot1agCfmMepSlmTWTestId indicates the test identifier
used to initiate the two-way Synthetic Loss Measurement (SLM) test. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.2 |
||||||
|
tnDot1agCfmMepSlmTWMacAddress
The value of tnDot1agCfmMepSlmTWMacAddress specifies the MAC address
used as a target for the two-way Synthetic Loss Measurement (SLM) test. This object MUST be set to a valid MAC Address for proper execu… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.3 |
||||||
|
tnDot1agCfmMepSlmTWPriority
The value of tnDot1agCfmMepSlmTWPriority specifies the priority used
in the generated test frame for the two-way Synthetic Loss Measurement (SLM) test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.4 |
||||||
|
tnDot1agCfmMepSlmTWInterval
The value of tnDot1agCfmMepSlmTWInterval specifies the delay, in
seconds, between Synthetic Loss Measurement (SLM) messages for the two-way SLM test. Following are the allowed value for 1830 TPS: {33,… |
secondsUnsigned32r/w Constraints: range: 1-5000 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.5 |
||||||
|
tnDot1agCfmMepSlmTWTimeout
The value of tnDot1agCfmMepSlmTWTimeout specifies the time-out value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon expiration of the timeout period, the agen… |
secondsUnsigned32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.6 |
||||||
|
tnDot1agCfmMepSlmTWDataSize
The value of tnDot1agCfmMepSlmTWDataSize specifies the data size,
in bytes, contained in the padding TLV for the two-way Synthetic Loss Measurement (SLM) test. A value of zero (0) specifies that no padding TLV is insert… |
bytesUnsigned32r/w Constraints: range: 0-9558 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.7 |
||||||
|
tnDot1agCfmMepSlmTWSendCount
The value of tnDot1agCfmMepSlmTWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send during the two-way SLM test. |
packetsUnsigned32r/w Constraints: range: 1-1000 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.8 |
||||||
|
tnDot1agCfmMepSlmTWIntervalRedef
The value of tnDot1agCfmMepSlmTWIntervalRedef specifies the interval
of SLM frames transmitted. The permitted values are 100ms(0),1s (1),10s(2),1m(3),10(4). |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.9 |
||||||
|
tnDot1agCfmMepSlmTWIntrvlUnits
The value of tnDot1agCfmMepSlmTWIntrvlUnits, in conjuction with
tnDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic Loss Measurement (SLM) messages sent by the two-way SLM test. For example, if tnDot1… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.10 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6
·
1 row entry
·
7 columns
tnDot1agCfmMepSlmOWTestTable consists of the MEP configuration for issuing individual Synthetic Loss Measurement one-way tests.
tnDot1agCfmMepSlmOWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with…
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tnDot1agCfmMepSlmOWTestStatus
The value of tnDot1agCfmMepSlmOWTestStatus specifies the operational
state of the one-way Synthetic Loss Measurement (SLM) test. To issue a one-way SLM test the user must issue an SNMP SET on this object … |
TN-TC-MIBTmnxEnabledDisabledr/w Textual Convention: TN-TC-MIBTmnxEnabledDisabled EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.1 |
||||
|
tnDot1agCfmMepSlmOWTestId
The value of tnDot1agCfmMepSlmOWTestId indicates the test identifier
used to initiate the one-way Synthetic Loss Measurement (SLM) test. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.2 |
||||
|
tnDot1agCfmMepSlmOWMacAddress
The value of tnDot1agCfmMepSlmOWMacAddress specifies the MAC address
used as a target for the one-way Synthetic Loss Measurement (SLM) Test. This object MUST be set to a valid MAC Address for proper execu… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.3 |
||||
|
tnDot1agCfmMepSlmOWPriority
The value of tnDot1agCfmMepSlmOWPriority specifies the priority used
in the generated test frame for the one-way Synthetic Loss Measurement (SLM) test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.4 |
||||
|
tnDot1agCfmMepSlmOWInterval
The value of tnDot1agCfmMepSlmOWInterval specifies the delay, in
seconds, between Synthetic Loss Measurement (SLM) messages for the one-way SLM test. |
secondsUnsigned32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.5 |
||||
|
tnDot1agCfmMepSlmOWDataSize
The value of tnDot1agCfmMepSlmOWDataSize specifies the data size,
in bytes, contained in the padding TLV for the one-way Synthetic Loss Measurement (SLM) test. A value of zero (0) specifies that no padding TLV is insert… |
bytesUnsigned32r/w Constraints: range: 0-1500 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.6 |
||||
|
tnDot1agCfmMepSlmOWSendCount
The value of tnDot1agCfmMepSlmOWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send consecutively during the one-way SLM test. |
packetsUnsigned32r/w Constraints: range: 1-100 |
.1.3.6.1.4.1.7483.6.1.2.52.7.6.1.7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7
·
1 row entry
·
9 columns
tnDot1agCfmMepSlmTestRsltTable consists of the results of manually triggered Synthetic Loss Measurement tests.
tnDot1agCfmMepSlmTestRsltEntry contains the results of a
manually triggered Synthetic Loss Measurement (SLM) test for a
particular MEP. Rows are auto-generated by the system based on the
issuing of a SLM test.
manually triggered Synthetic Loss Measurement (SLM) test for a
particular MEP. Rows are auto-generated by the system based on the
issuing of a SLM test.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier tnDot1agCfmMepSlmTestType tnDot1agCfmMepSlmRemoteMacAddr
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
tnDot1agCfmMepSlmTestType
The value of tnDot1agCfmMepSlmTestType specifies whether the
row for this Synthetic Loss Measurement (SLM) test refers to a two-way SLM test. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.1 |
||||
|
tnDot1agCfmMepSlmRemoteMacAddr
The value of tnDot1agCfmMepSlmRemoteMacAddr specifies the source MAC
address of the remote node involved in the test. |
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.2 |
||||
|
tnDot1agCfmMepSlmTestId
The value of tnDot1agCfmMepSlmTestId indicates the test identifier
that was used to initiate the Synthetic Loss Measurement (SLM) test. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.3 |
||||
|
tnDot1agCfmMepSlmRemoteMepId
The value of tnDot1agCfmMepSlmRemoteMepId indicates the MEP
Identifier of the remote node involved in the test. |
IEEE8021-CFM-MIBDot1agCfmMepId Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepId Unsigned32Type Constraints: range: 1..8191 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.4 |
||||
|
tnDot1agCfmMepSlmLastTxSeqF
The value of tnDot1agCfmMepSlmLastTxSeqF indicates the last
received sequence number on the local node, transmitted by the remote node. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.5 |
||||
|
tnDot1agCfmMepSlmPacketIn
The value of tnDot1agCfmMepSlmPacketIn indicates the number of
packets received during the execution of the test. |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.6 |
||||
|
tnDot1agCfmMepSlmPacketLossIn
The value of tnDot1agCfmMepSlmPacketLossIn indicates the number of
packets transmitted from the remote node but not received on the local node during the execution of the test. |
packetsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.7 |
||||
|
tnDot1agCfmMepSlmPacketLossOut
The value of tnDot1agCfmMepSlmPacketLossOut indicates the number of
packets transmitted from the local node but not received on the remote node during the execution of the test. |
packetsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.8 |
||||
|
tnDot1agCfmMepSlmPacketUnack
The value of tnDot1agCfmMepSlmPacketUnack indicates the number of
unacknowledged lost packets during the execution of the test. |
packetsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.7.1.9 |
.1.3.6.1.4.1.7483.6.1.2.52.7.8
·
1 row entry
·
6 columns
tnDot1agCfmMepOndemandLmTestTable consists of the MEP configuration for issuing individual on-demand Regular Loss Measurement tests.
tnDot1agCfmMepOndemandLmTestEntry contains the configuration for
generating regular Loss Measurement (LM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically wi…
generating regular Loss Measurement (LM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically wi…
Indexes
No indexes recorded
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnDot1agCfmMepOndemandLmTestStatus
The value of tnDot1agCfmMepOndemandLmTestStatus specifies the operational
state of the on-demand regular Loss Measurement (LM) test. To issue a on-demand regular LM test the user must issue an SNMP SET on… |
TN-TC-MIBTmnxEnabledDisabledr/w Textual Convention: TN-TC-MIBTmnxEnabledDisabled EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.1 |
||||||||||||||||
|
tnDot1agCfmMepOndemandLmDestMacAddress
The value of tnDot1agCfmMepOndemandLmMacAddress specifies the MAC address
used as a target for the on-demand regular Loss Measurement (LM) test. This object MUST be set to a valid MAC Address for proper e… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.2 |
||||||||||||||||
|
tnDot1agCfmMepOndemandLmPriority
The value of tnDot1agCfmMepOndemandLmPriority specifies the priority used
in the generated test frame for the on-demand regular Loss Measurement (LM) test. |
Unsigned32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.3 |
||||||||||||||||
|
tnDot1agCfmMepOndemandLmInterval
The value of tnDot1agCfmMepOndemandLmInterval specifies the delay, in
seconds, between on-demand regular Loss Measurement (LM) messages for the on-demand regular LM test. allowed values: 100ms, 1s(default), 10s, 1m, 10m. |
IEEE8021-CFM-MIBDot1agCfmCcmIntervalr/w Textual Convention: IEEE8021-CFM-MIBDot1agCfmCcmInterval EnumerationType Values:
|
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.4 |
||||||||||||||||
|
tnDot1agCfmMepOndemandLmSendCount
The value of tnDot1agCfmMepOndemandLmSendCount specifies the number of
LMM packets to send during the on-demand regular LM test. |
packetsUnsigned32r/w Constraints: range: 2-101 |
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.5 |
||||||||||||||||
|
tnDot1agCfmMepOndemandLmTimeout
The value of tnDot1agCfmMepOndemandLmTimeout specifies the time-out value,
in milliseconds, to wait for a response message for the two-way LM test. Upon expiration of the timeout period, the agent assumes that the respo… |
millisecondsUnsigned32r/w Constraints: range: 1000-10000 |
.1.3.6.1.4.1.7483.6.1.2.52.7.8.1.6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9
·
1 row entry
·
6 columns
tnDot1agCfmMepOndemandLmTestRsltTable consists of the results of manually triggered on-demand regular Loss Measurement tests.
tnDot1agCfmMepOndemandLmTestRsltEntry contains the results of a
manually triggered on-demand regular Loss Measurement (LM) test.
Rows are auto-generated by the system based on the
issuing of a on-demand regular LM test.
manually triggered on-demand regular Loss Measurement (LM) test.
Rows are auto-generated by the system based on the
issuing of a on-demand regular LM test.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
| Column | Syntax | OID |
|---|---|---|
|
tnDot1agCfmMepOndemandLmTnTF
The value of tnDot1agCfmMepOndemandLmTnTF indicates the total number of
near-end transmitted service frames from the remote node during the execution of the test. |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.1 |
|
tnDot1agCfmMepOndemandLmTnLF
The value of tnDot1agCfmMepOndemandLmTnLF indicates the total number of
near-end lost service frames on the local node during the execution of the test. |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.2 |
|
tnDot1agCfmMepOndemandLmTfTF
The value of tnDot1agCfmMepOndemandLmTfTF indicates the total number of
far-end transmitted service frames from the local node during the execution of the test. |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.3 |
|
tnDot1agCfmMepOndemandLmTfLF
The value of tnDot1agCfmMepOndemandLmTfLF indicates the total number of
far-end lost service frames on the remote node during the execution of the test. |
packetsSNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.4 |
|
tnDot1agCfmMepOndemandLmUnack
The value of tnDot1agCfmMepOndemandLmUnack indicates the number of
unacknowledged lost LM packets during the execution of the test. |
packetsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.5 |
|
tnDot1agCfmMepOndemandLmRemoteMacAddr
The MAC address of the remote node involved in the test.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.9.1.6 |
.1.3.6.1.4.1.7483.6.1.2.52.7.10
·
1 row entry
·
2 columns
The tnDot1agCfmMepOWDelayRsltExtTable indicates the near-end One-way Delay result. This table is not persistent over reboots of the chassis.
The near-end one-way delay test result table.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
| Column | Syntax | OID |
|---|---|---|
|
tnDot1agCfmMepOWDelayRsltExtTnFD
The value of tnDot1agCfmMepOWDelayRsltExtTnFD indicates one-way
near-end frame delay from remote MEP to local MEP. It is the amount of time, measured in microseconds, from when the test-frame was transmitted by the remo… |
microsecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.10.1.1 |
|
tnDot1agCfmMepOWDelayRsltExtTnFDV
The value of tnDot1agCfmMepDelayVariation indicates the amount of
near-end one-way time delay variation, measured in microseconds, from the two most recent near-end one-way time delay measurements |
microsecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.6.1.2.52.7.10.1.2 |