tnDot1agCfmMepSlmTWTestStatus

TN-IEEE8021-CFM-MIB · .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.1
MIB view Table view

Object

column r/w TN-TC-MIBTmnxEnabledDisabled 
The value of tnDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test.
              
To issue a two-way SLM test the user must issue an SNMP SET on this
object with a value 'enabled (1)'. To abort the two-way SLM test issue
an SNMP SET on this object with the value 'disabled (2)'.
              
A read on this object represents the current state of the two-way SLM
test:
    enabled  (1)  - The test is actively running, and attempts at
                    modifying any two-way SLM object will be rejected
    disabled (2)  - The test is not running.
              
Once the test is complete this object will revert to the default value
'disabled (2)'.

Context

MIB
TN-IEEE8021-CFM-MIB
OID
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.1
Type
column
Access
readwrite
Status
current
Parent
tnDot1agCfmMepSlmTWTestEntry
Table
tnDot1agCfmMepSlmTWTestTable
Siblings
9

Syntax

TN-TC-MIBTmnxEnabledDisabled
Source
TN-TC-MIBTmnxEnabledDisabled
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnDot1agCfmMepSlmTWIntrvlUnits
The value of tnDot1agCfmMepSlmTWIntrvlUnits, in conjuction with tnDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic Loss Measurement (SLM) messages sent by the t…
columnEnumeration.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.10
tnDot1agCfmMepSlmTWTestId
The value of tnDot1agCfmMepSlmTWTestId indicates the test identifier used to initiate the two-way Synthetic Loss Measurement (SLM) test.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.2
tnDot1agCfmMepSlmTWMacAddress
The value of tnDot1agCfmMepSlmTWMacAddress specifies the MAC address used as a target for the two-way Synthetic Loss Measurement (SLM) test. This object MUST be set…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.3
tnDot1agCfmMepSlmTWPriority
The value of tnDot1agCfmMepSlmTWPriority specifies the priority used in the generated test frame for the two-way Synthetic Loss Measurement (SLM) test.
columnUnsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.4
tnDot1agCfmMepSlmTWInterval
The value of tnDot1agCfmMepSlmTWInterval specifies the delay, in seconds, between Synthetic Loss Measurement (SLM) messages for the two-way SLM test. Following ar…
columnseconds Unsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.5
tnDot1agCfmMepSlmTWTimeout
The value of tnDot1agCfmMepSlmTWTimeout specifies the time-out value, in seconds, to wait for a Synthetic Loss Measurement (SLM) message to reply for the two-way SLM test. Upon ex…
columnseconds Unsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.6
tnDot1agCfmMepSlmTWDataSize
The value of tnDot1agCfmMepSlmTWDataSize specifies the data size, in bytes, contained in the padding TLV for the two-way Synthetic Loss Measurement (SLM) test. A value of zero (0)…
columnbytes Unsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.7
tnDot1agCfmMepSlmTWSendCount
The value of tnDot1agCfmMepSlmTWSendCount specifies the number of Synthetic Loss Measurement (SLM) packets to send during the two-way SLM test.
columnpackets Unsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.8
tnDot1agCfmMepSlmTWIntervalRedef
The value of tnDot1agCfmMepSlmTWIntervalRedef specifies the interval of SLM frames transmitted. The permitted values are 100ms(0),1s (1),10s(2),1m(3),10(4).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.7483.6.1.2.52.7.5.1.9