tnDot1agCfmMepEthTestEnable
TN-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.11
Object
The value of tnDot1agCfmMepEthTestEnable specifies whether
ethernet test frames are to be generated on transmission or
processed on reception. If this object is set to 'false',
then tnDot1agCfmMepEthTestPattern is undefined.
When this object is set to 'true', tnDot1agCfmMepEthTestPattern
is reset to its default value, unless tnDot1agCfmMepEthTestPattern
is set to a specific value in the same SNMP PDU.
Context
- MIB
- TN-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnDot1agCfmMepEntry
- Table
- tnDot1agCfmMepTable
- Siblings
- 29
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnDot1agCfmMepSdpId The value of tnDot1agCfmMepSdpId specifies, along with the
tnDot1agCfmMepVcId, the SDP-Binding within a bridge port,
to which the MEP is attached.
This object is ap… | column | TN-SERV-MIBSdpId | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.1 |
| tnDot1agCfmMepEthAisTxCount The value of tnDot1agCfmMepEthAisTxCount indicates number of
AIS frames transmitted on the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.10 |
| tnDot1agCfmMepEthTestPattern The value of tnDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
specifies the data content as all zero value… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.12 |
| tnDot1agCfmMepEthTestMacAddr The value of tnDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent.
Setting this object will trigger the test fr… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.13 |
| tnDot1agCfmMepEthTestDataLen The value of tnDot1agCfmMepEthTestDataLen specifies the length of the data
sent in an Eth-test frame. The contents of the data is specified by the
tnDot1agCfmMepEthTestPattern obj… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.14 |
| tnDot1agCfmMepEthTestPriority The value of tnDot1agCfmMepEthTestPriority specifies the priority used
in generating Eth-Test frames. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.15 |
| tnDot1agCfmMepOWDTMacAddress The value of tnDot1agCfmMepOWDTMacAddress specifies the MAC address used
as a target for the One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way-D… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.16 |
| tnDot1agCfmMepOWDTPriority The value of tnDot1agCfmMepOWDTPriority specifies the priority used in
the generated test frame for the One-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.17 |
| tnDot1agCfmMepTWDTMacAddress The value of tnDot1agCfmMepTWDTMacAddress specifies the MAC address used
as a target for the Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way-D… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.18 |
| tnDot1agCfmMepTWDTPriority The value of tnDot1agCfmMepTWDTPriority specifies the priority used in
the generated test frame for the Two-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.19 |
| tnDot1agCfmMepVcId The value of tnDot1agCfmMepVcId specifies, along with
tnDot1agCfmMepSdpId, the SDP Binding for the bridge.
tnDot1agCfmMepVcId is applicable to SDP-Bindings only, an… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.2 |
| tnDot1agCfmMepSvcId The value of tnDot1agCfmMepSvcId specifies the service that the virtual
MEP is being created in.
tnDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
be… | column | TN-TC-MIBTmnxServId | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.20 |
| tnDot1agCfmMepControlMep The value of tnDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over which
this MEP is configured. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.21 |
| tnDot1agCfmMepEthTestThreshold The value of tnDot1agCfmMepEthTestThreshold specifies when a
tnDot1agCfmMepEthTestComplete notification is sent. If
tnDot1agCfmMepEthTestThreshold is set to zero (0), a notificati… | column | bit-errors Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.22 |
| tnDot1agCfmMepOWDTThreshold The value of tnDot1agCfmMepOWDTThreshold specifies when a
tnDot1agCfmMepDMTestComplete notification is sent for a one-way-delay
test. If tnDot1agCfmMepOWDTThreshold is set to zero… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.23 |
| tnDot1agCfmMepMcLagInactive The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
value of tmnxDot1agCfmMcLagStdbyInact… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.24 |
| tnDot1agCfmMepTWDTDataSize The value of tnDot1agCfmMepTWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the Two-Way delay test.
A value of zero (0) specifies that no padding
T… | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.25 |
| tnDot1agCfmMepTransmitLbmDataTlvSize The value of tnDot1agCfmMepTransmitLbmDataTlvSize specifies
the data size, in bytes, contained in the padding TLV
for the LBM test. A value of zero (0) specifies that
no padding … | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.26 |
| tnDot1agCfmMepType The value of tmnxDot1agCfmMepType specifies the endpoint type that
this MEP facilitates.
default (0) -- implements a traditional MEP.
facilityPort (1) -- im… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.27 |
| tnDot1agCfmMepFaultPropagation The value of tnDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service
containing the MEP. It also specifies if the ME… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.28 |
| tnDot1agCfmMepOWDTDataSize The value of tnDot1agCfmMepOWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the one-Way delay test.
A value of zero (0) specifies that no padding T… | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.29 |
| tnDot1agCfmMepMacAddress The value of tnDot1agCfmMepMacAddress specifies the mac-address
that is assigned to dot1agCfmMepMacAddress. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.3 |
| tnDot1agCfmMepAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.30 |
| tnDot1agCfmMepAisEnable The value of tnDot1agCfmMepAisEnable specifies whether AIS
frames are generated from the Maintenance Entity Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.4 |
| tnDot1agCfmMepAisMegLevel The value of tnDot1agCfmMepAisMegLevel specifies the levels
that should be notified to suppress alarms resulting from defect
conditions detected by the MEP. | column | Bits | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.5 |
| tnDot1agCfmMepAisPriority The value of tnDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.6 |
| tnDot1agCfmMepAisInterval The value of tnDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.7 |
| tnDot1agCfmMepEthRxAisInterval The value of tnDot1agCfmMepEthRxAisInterval indicates the AIS Interval
received in the last AIS Frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.8 |
| tnDot1agCfmMepEthRxAis The value of tnDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.9 |