tnDot1agCfmMepSlmTWTestEntry
TN-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1
Object
row
tnDot1agCfmMepSlmTWTestEntry contains the configuration for
generating Synthetic Loss Measurement (SLM) Tests for a particular MEP.
A row exists for each row in the dot1agCfmMepTable, and is destroyed
automatically with the removal of a row in the dot1agCfmMepTable.
Results from a two-way SLM test are reported in
tnDot1agCfmMepSlmTestRsltTable with the tnDot1agCfmMepSlmTestType
set to 'twoWayTest (2)'.
Context
- MIB
- TN-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.52.7.5.1- Type
- row
- Status
- current
- Parent
- tnDot1agCfmMepSlmTWTestTable
- Table
- tnDot1agCfmMepSlmTWTestTable
- Children
- 10
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnDot1agCfmMepSlmTWTestStatus The value of tnDot1agCfmMepSlmTWTestStatus specifies the operational
state of the two-way Synthetic Loss Measurement (SLM) test.
To issue a two-way SLM test the use… | column | TN-TC-MIBTmnxEnabledDisabled | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.1 |
| tnDot1agCfmMepSlmTWIntrvlUnits The value of tnDot1agCfmMepSlmTWIntrvlUnits, in conjuction with
tnDot1agCfmMepSlmTWInterval, specifies the interval between Synthetic
Loss Measurement (SLM) messages sent by the t… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.10 |
| tnDot1agCfmMepSlmTWTestId The value of tnDot1agCfmMepSlmTWTestId indicates the test identifier
used to initiate the two-way Synthetic Loss Measurement (SLM) test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.2 |
| tnDot1agCfmMepSlmTWMacAddress The value of tnDot1agCfmMepSlmTWMacAddress specifies the MAC address
used as a target for the two-way Synthetic Loss Measurement (SLM) test.
This object MUST be set… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.3 |
| tnDot1agCfmMepSlmTWPriority The value of tnDot1agCfmMepSlmTWPriority specifies the priority used
in the generated test frame for the two-way Synthetic Loss Measurement
(SLM) test. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.4 |
| tnDot1agCfmMepSlmTWInterval The value of tnDot1agCfmMepSlmTWInterval specifies the delay, in
seconds, between Synthetic Loss Measurement (SLM) messages for the
two-way SLM test.
Following ar… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.5 |
| tnDot1agCfmMepSlmTWTimeout The value of tnDot1agCfmMepSlmTWTimeout specifies the time-out value,
in seconds, to wait for a Synthetic Loss Measurement (SLM) message to
reply for the two-way SLM test. Upon ex… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.6 |
| tnDot1agCfmMepSlmTWDataSize The value of tnDot1agCfmMepSlmTWDataSize specifies the data size,
in bytes, contained in the padding TLV for the two-way Synthetic Loss
Measurement (SLM) test. A value of zero (0)… | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.7 |
| tnDot1agCfmMepSlmTWSendCount The value of tnDot1agCfmMepSlmTWSendCount specifies the number of
Synthetic Loss Measurement (SLM) packets to send during the two-way
SLM test. | column | packets Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.8 |
| tnDot1agCfmMepSlmTWIntervalRedef The value of tnDot1agCfmMepSlmTWIntervalRedef specifies the interval
of SLM frames transmitted.
The permitted values are 100ms(0),1s (1),10s(2),1m(3),10(4). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.5.1.9 |