tnDot1agCfmMepMacAddress
TN-IEEE8021-CFM-MIB ·
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.3
Object
The value of tnDot1agCfmMepMacAddress specifies the mac-address that is assigned to dot1agCfmMepMacAddress.
Context
- MIB
- TN-IEEE8021-CFM-MIB
- OID
.1.3.6.1.4.1.7483.6.1.2.52.7.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnDot1agCfmMepEntry
- Table
- tnDot1agCfmMepTable
- Siblings
- 29
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnDot1agCfmMepSdpId The value of tnDot1agCfmMepSdpId specifies, along with the
tnDot1agCfmMepVcId, the SDP-Binding within a bridge port,
to which the MEP is attached.
This object is ap… | column | TN-SERV-MIBSdpId | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.1 |
| tnDot1agCfmMepEthAisTxCount The value of tnDot1agCfmMepEthAisTxCount indicates number of
AIS frames transmitted on the MEP. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.10 |
| tnDot1agCfmMepEthTestEnable The value of tnDot1agCfmMepEthTestEnable specifies whether
ethernet test frames are to be generated on transmission or
processed on reception. If this object is set to 'false',
th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.11 |
| tnDot1agCfmMepEthTestPattern The value of tnDot1agCfmMepEthTestPattern specifies the data-content
of the AIS test frames. 'allZerosNoCrc (0)' and 'allZerosCrc (1)'
specifies the data content as all zero value… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.12 |
| tnDot1agCfmMepEthTestMacAddr The value of tnDot1agCfmMepEthTestMacAddr specifies the MAC address
of the target to whom the Eth-test frames are sent.
Setting this object will trigger the test fr… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.13 |
| tnDot1agCfmMepEthTestDataLen The value of tnDot1agCfmMepEthTestDataLen specifies the length of the data
sent in an Eth-test frame. The contents of the data is specified by the
tnDot1agCfmMepEthTestPattern obj… | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.14 |
| tnDot1agCfmMepEthTestPriority The value of tnDot1agCfmMepEthTestPriority specifies the priority used
in generating Eth-Test frames. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.15 |
| tnDot1agCfmMepOWDTMacAddress The value of tnDot1agCfmMepOWDTMacAddress specifies the MAC address used
as a target for the One-Way-Delay Test (OWDT).
Setting this object will trigger a One-Way-D… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.16 |
| tnDot1agCfmMepOWDTPriority The value of tnDot1agCfmMepOWDTPriority specifies the priority used in
the generated test frame for the One-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.17 |
| tnDot1agCfmMepTWDTMacAddress The value of tnDot1agCfmMepTWDTMacAddress specifies the MAC address used
as a target for the Two-Way-Delay Test (TWDT).
Setting this object will trigger a Two-Way-D… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.18 |
| tnDot1agCfmMepTWDTPriority The value of tnDot1agCfmMepTWDTPriority specifies the priority used in
the generated test frame for the Two-Way-Delay test. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.19 |
| tnDot1agCfmMepVcId The value of tnDot1agCfmMepVcId specifies, along with
tnDot1agCfmMepSdpId, the SDP Binding for the bridge.
tnDot1agCfmMepVcId is applicable to SDP-Bindings only, an… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.2 |
| tnDot1agCfmMepSvcId The value of tnDot1agCfmMepSvcId specifies the service that the virtual
MEP is being created in.
tnDot1agCfmMepSvcId is applicable to virtual MEPs only, and MUST
be… | column | TN-TC-MIBTmnxServId | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.20 |
| tnDot1agCfmMepControlMep The value of tnDot1agCfmMepControlMep specifies whether or not the
operational state of the MEP is used by the management entity over which
this MEP is configured. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.21 |
| tnDot1agCfmMepEthTestThreshold The value of tnDot1agCfmMepEthTestThreshold specifies when a
tnDot1agCfmMepEthTestComplete notification is sent. If
tnDot1agCfmMepEthTestThreshold is set to zero (0), a notificati… | column | bit-errors Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.22 |
| tnDot1agCfmMepOWDTThreshold The value of tnDot1agCfmMepOWDTThreshold specifies when a
tnDot1agCfmMepDMTestComplete notification is sent for a one-way-delay
test. If tnDot1agCfmMepOWDTThreshold is set to zero… | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.23 |
| tnDot1agCfmMepMcLagInactive The value of tmnxDot1agCfmMepMcLagInactive indicates whether or not the
MEP is inactive, 'standby (2)', due to the MC-LAG standby state. The
value of tmnxDot1agCfmMcLagStdbyInact… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.24 |
| tnDot1agCfmMepTWDTDataSize The value of tnDot1agCfmMepTWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the Two-Way delay test.
A value of zero (0) specifies that no padding
T… | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.25 |
| tnDot1agCfmMepTransmitLbmDataTlvSize The value of tnDot1agCfmMepTransmitLbmDataTlvSize specifies
the data size, in bytes, contained in the padding TLV
for the LBM test. A value of zero (0) specifies that
no padding … | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.26 |
| tnDot1agCfmMepType The value of tmnxDot1agCfmMepType specifies the endpoint type that
this MEP facilitates.
default (0) -- implements a traditional MEP.
facilityPort (1) -- im… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.27 |
| tnDot1agCfmMepFaultPropagation The value of tnDot1agCfmMepFaultPropagation specifies what action
should be taken by the MEP if a fault is detected in the service
containing the MEP. It also specifies if the ME… | column | Enumeration | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.28 |
| tnDot1agCfmMepOWDTDataSize The value of tnDot1agCfmMepOWDTDataSize specifies the data size,
in bytes, contained in the padding TLV for the one-Way delay test.
A value of zero (0) specifies that no padding T… | column | bytes Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.29 |
| tnDot1agCfmMepAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.30 |
| tnDot1agCfmMepAisEnable The value of tnDot1agCfmMepAisEnable specifies whether AIS
frames are generated from the Maintenance Entity Group (MEG). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.4 |
| tnDot1agCfmMepAisMegLevel The value of tnDot1agCfmMepAisMegLevel specifies the levels
that should be notified to suppress alarms resulting from defect
conditions detected by the MEP. | column | Bits | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.5 |
| tnDot1agCfmMepAisPriority The value of tnDot1agCfmMepAisPriority specifies at what priority
the AIS frames should be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.6 |
| tnDot1agCfmMepAisInterval The value of tnDot1agCfmMepAisInterval specifies at what intervals
to transmit AIS frames. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.7 |
| tnDot1agCfmMepEthRxAisInterval The value of tnDot1agCfmMepEthRxAisInterval indicates the AIS Interval
received in the last AIS Frame. | column | seconds Unsigned32 | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.8 |
| tnDot1agCfmMepEthRxAis The value of tnDot1agCfmMepEthRxAis indicates the MEP is receiving
AIS test frames from one or more of its sub-layer MEPs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7483.6.1.2.52.7.1.1.9 |