HUAWEI-SNMP-NOTIFICATION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
75

hwAlarmSendTable

table
.1.3.6.1.4.1.2011.6.30.1.7 · 1 row entry · 2 columns
Open in standard view 
Alarm reporting control table. It is used to control 
by alarm ID whether to report the trap generated 
corresponding to an alarm to the trap host.
hwAlarmSendEntry entry .1.3.6.1.4.1.2011.6.30.1.7.1
Alarm reporting control table. It is used to control
by alarm ID whether to report the trap generated
corresponding to an alarm to the trap host.
The index of this entry is object hwAlarmIndex.
Indexes
hwAlarmIndex
Column Syntax OID
hwAlarmIndex
Index of the alarm reporting control table. The index value is the alarm ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.1.7.1.1
hwAlarmSendSwitch
Control function of whether to report the trap generated corresponding to an
alarm to the trap host.
Options:
1. on(1) -indicates that the trap generated corresponding to the alarm of
object hwAlarmIndex …
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2011.6.30.1.7.1.2

hwMaintainSendTable

table obsolete
.1.3.6.1.4.1.2011.6.30.1.8 · 1 row entry · 2 columns
Open in standard view 
Currently, the table is not supported.
hwMaintainSendEntry entry .1.3.6.1.4.1.2011.6.30.1.8.1
Currently, the table is not supported.
The index of this entry is hwMaintainIndex.
Indexes
hwMaintainIndex
Column Syntax OID
hwMaintainIndex obsolete
Currently, the object is not supported.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.1.8.1.1
hwMaintainSendSwitch obsolete
Currently, the object is not supported.
Options:
1.on(1) -on.
2.off(2)-off.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.2011.6.30.1.8.1.2

hwRtuConfigIDTable

table
.1.3.6.1.4.1.2011.6.30.3.11 · 1 row entry · 1 columns
Open in standard view 
RTU ConfigID table. 
Currently, the object is not supported.
hwRtuConfigIDEntry entry .1.3.6.1.4.1.2011.6.30.3.11.1
RTU ConfigID table.The index of this entry is ifIndex.
Currently, the object is not supported.
Indexes
IF-MIBifIndex
Column Syntax OID
hwRtuConfigID
The ConfigID of RTU.
Currently, the object is not supported.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.2011.6.30.3.11.1.1

hwAlarmStatInfoTable

table obsolete
.1.3.6.1.4.1.2011.6.30.4.6 · 1 row entry · 3 columns
Open in standard view 
Function of querying the alarm statistical information. 
It is used to query the count of the alarm occurring in the statistical period.
hwAlarmStatInfoEntry entry .1.3.6.1.4.1.2011.6.30.4.6.1
Function of querying the alarm statistical information.
It is used to query the count of the alarm occurring in the statistical period.
The index of this entry is hwAlarmStatID. It is used to specify the alarm whose
…
Indexes
hwAlarmStatID
Column Syntax OID
hwAlarmStatID obsolete
Index of operation table hwAlarmStatInfoTable. It is used to indicate
the ID of the alarm to be queried.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.4.6.1.1
hwAlarmStatCurrentNum obsolete
Query the count of the alarm occurring in the current statistical
period by index.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.4.6.1.2
hwAlarmStatLastNum obsolete
Query the count of the alarm occurring in the previous statistical
period by index.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.4.6.1.3

hwSyslogOutputTable

table
.1.3.6.1.4.1.2011.6.30.5.1 · 1 row entry · 2 columns
Open in standard view 
Levels of the all the logs supported by the current syslog.
hwSyslogOutputEntry entry .1.3.6.1.4.1.2011.6.30.5.1.1
Levels of the all the logs supported by the current syslog.
The index of this entry is hwSyslogLevelIndex. hwSyslogLevelIndex is used to
describe of the level of the output syslog information.
Indexes
hwSyslogLevelIndex
Column Syntax OID
hwSyslogLevelIndex
Description of the level of the output syslog information.
Currently, the syslog supports eight data types.
Options:
1. emergency(1) -indicates that system is unusable.
2. alert(2) -indicates that action m…
Enumeration
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7informational
8debug
 .1.3.6.1.4.1.2011.6.30.5.1.1.1
hwSyslogOutputOperStatus
The output status of the syslog information.
Options:
1. unoutput(1) -indicates that the syslog information is not output to the local PC or server.
2. output(2) -indicates that the syslog information is output to th…
Enumerationr/w
Enumerated Values:
1unoutput
2output
 .1.3.6.1.4.1.2011.6.30.5.1.1.2

hwSysloglogFacilityTable

table
.1.3.6.1.4.1.2011.6.30.5.4 · 1 row entry · 3 columns
Open in standard view 
Log facility of the current syslog.  
The index of this entry is hwSyslogLogType. hwSyslogLogType is used to 
describe the type of the syslog.
hwSysloglogFacilityEntry entry .1.3.6.1.4.1.2011.6.30.5.4.1
Log facility of the current syslog.
The index of this entry is hwSyslogLogType. hwSyslogLogType is used to
describe the type of the syslog.
Indexes
hwSyslogLogType
Column Syntax OID
hwSyslogLogType
Description of the type of the output syslog information.
Options:
1. log(1) -indicates that the syslog type is log.
2. alarmEvent(2) -indicates that the syslog type is alarm-event.
3. igmp(3) -indicate…
Enumeration
Enumerated Values:
1log
2alarmEvent
3igmp
4voip
5security
6ssa
 .1.3.6.1.4.1.2011.6.30.5.4.1.1
hwSyslogLogFacility
Description of the facility of the output syslog information.
Options:
1. local0(1) -indicates that the syslog facility is local0.
2. local1(2) -indicates that the syslog facility is local1.
3. local2(3) …
Enumerationr/w
Enumerated Values:
1local0
2local1
3local2
4local3
5local4
6local5
7local6
8local7
9default
 .1.3.6.1.4.1.2011.6.30.5.4.1.2
hwSyslogLogSeverity
Description of the severity of the output syslog information.
Options:
1. emergency(1) -indicates that system is unusable.
2. alert(2) -indicates that action must be taken immediately.
3. critical(3) -i…
Enumerationr/w
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7informational
8debug
9default
 .1.3.6.1.4.1.2011.6.30.5.4.1.3

hwEventCtrlTable

table
.1.3.6.1.4.1.2011.6.30.6.1 · 1 row entry · 10 columns
Open in standard view 
Event control table. It is used to set the event level through
the NMS or query the event list supported in the system. 
The information that can be queried includes the event ID, event name, 
event class, event type, event level, event default level, 
count of the event in the statistical period, count of the event in 
the previous statistical period and event management status.
hwEventCtrlEntry entry .1.3.6.1.4.1.2011.6.30.6.1.1
Event control table. It is used to set the event level through
the NMS or query the event list supported in the system.
The information that can be queried includes the event ID, event name,
event class, event type, e…
Indexes
hwEventID
Column Syntax OID
hwEventID
Index object of the event control table. The index value is
the event ID and the information about the event control table
is obtained according to the current event ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.6.1.1.1
hwEventName
Event name. It is used to briefly describe the event trigged by the system.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.30.6.1.1.2
hwEventClass
Event class. Currently, the system supports two event classes:
Options:
1. running(1) -indicates the running event, such as the prompt displayed
during the loading process.
2. security(2) -indicates…
Enumeration
Enumerated Values:
1running
2security
 .1.3.6.1.4.1.2011.6.30.6.1.1.3
hwEventLevel
Reference the description of SeverityLevel.
SeverityLevelr/w
Textual Convention: SeverityLevel Enumeration
Type Values:
1critical
2major
3minor
4warning
5cleared
6indeterminate
7informational
8reliable
9notalarmed
10notreported
 .1.3.6.1.4.1.2011.6.30.6.1.1.4
hwEventDefaultLevel
Reference the description of SeverityLevel.
SeverityLevel
Textual Convention: SeverityLevel Enumeration
Type Values:
1critical
2major
3minor
4warning
5cleared
6indeterminate
7informational
8reliable
9notalarmed
10notreported
 .1.3.6.1.4.1.2011.6.30.6.1.1.5
hwEventType
Event type. Currently, the system supports five event types.
Options:
1. communication(1) -indicates the communication event.
2. service(2) -indicates the …
EventType
Textual Convention: EventType Enumeration
Type Values:
1communication
2servicequality
3processerror
4equipment
5environmental
 .1.3.6.1.4.1.2011.6.30.6.1.1.6
hwEventStatCurrNum
Count of the event occurring in the current period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.6.1.1.7
hwEventStatPrevNum
Count of the event occurring in the previous period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.6.1.1.8
hwEventAdminStatus
Event management status. Currently, the system supports two states.
Options:
1. init(1) -During the setting operation, you can change only the event that is
in the initial state to the alarm but …
Enumerationr/w
Enumerated Values:
1init
2conversion
 .1.3.6.1.4.1.2011.6.30.6.1.1.9
hwEventConditionEffect
Event Effect.
It is used to describe the Service effect of the event and is classified into two types.
Options:
1. standingcondition(1) -indicates a condition is standing.
2. transientcondition(2) -ind…
Enumeration
Enumerated Values:
1standingcondition
2transientcondition
 .1.3.6.1.4.1.2011.6.30.6.1.1.10

hwAlarmCtrlTable

table
.1.3.6.1.4.1.2011.6.30.7.1 · 1 row entry · 10 columns
Open in standard view 
Alarm control table. It is used to set the alarm level through the NMS or 
query the alarm list supported in the system. The information that can be queried
includes the alarm ID, alarm name, alarm class, alarm type, alarm level, alarm default 
level, count of the alarm in the statistical period, count of the alarm in the previous 
statistical period and alarm management status.
hwAlarmCtrlEntry entry .1.3.6.1.4.1.2011.6.30.7.1.1
Alarm control table. It is used to set the alarm level through the NMS or
query the alarm list supported in the system. The information that can be queried
includes the alarm ID, alarm name, alarm class, alarm type, al…
Indexes
hwAlarmID
Column Syntax OID
hwAlarmID
Index object of the alarm control table. The index value is the alarm ID and
the information about the alarm control table is obtained according to
the current alarm ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.7.1.1.1
hwAlarmName
Alarm name. It is used to briefly describe the alarm triggered by the system.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.6.30.7.1.1.2
hwAlarmClass
Alarm class. Currently, the system supports two alarm classes.
Options:
1. faultalarm(1) -indicates the fault alarm.
2. restorealarm(2) -indicates the restore al…
Enumeration
Enumerated Values:
1faultalarm
2restorealarm
 .1.3.6.1.4.1.2011.6.30.7.1.1.3
hwAlarmLevel
Reference the description of SeverityLevel.
SeverityLevelr/w
Textual Convention: SeverityLevel Enumeration
Type Values:
1critical
2major
3minor
4warning
5cleared
6indeterminate
7informational
8reliable
9notalarmed
10notreported
 .1.3.6.1.4.1.2011.6.30.7.1.1.4
hwAlarmDefaultLevel
Reference the description of SeverityLevel.
SeverityLevel
Textual Convention: SeverityLevel Enumeration
Type Values:
1critical
2major
3minor
4warning
5cleared
6indeterminate
7informational
8reliable
9notalarmed
10notreported
 .1.3.6.1.4.1.2011.6.30.7.1.1.5
hwAlarmType
Alarm type. It is used to describe the major cause of the alarm
and is classified into five types.
Options:
1. communication(1) -indicates the communication alarm.
2. service(2) -indicates the…
EventType
Textual Convention: EventType Enumeration
Type Values:
1communication
2servicequality
3processerror
4equipment
5environmental
 .1.3.6.1.4.1.2011.6.30.7.1.1.6
hwAlarmStatCurrNum
Count of the alarm occurring in the current period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.7.1.1.7
hwAlarmStatPrevNum
Count of the alarm occurring in the previous period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.6.30.7.1.1.8
hwAlarmAdminStatus
Alarm management status.
Options:
1. init(1) -The default status is init(1).
2. conversion(2) -If an alarm needs to be converted into an event,
perform the setting operation to set the manageme…
Enumerationr/w
Enumerated Values:
1init
2conversion
 .1.3.6.1.4.1.2011.6.30.7.1.1.9
hwAlarmServiceEffect
Alarm Service effect status.
It is used to describe the Service effect of the alarm and is classified into two types.
Options:
1. nonserviceaffect(1) -indicates the alarm is a non-service affecting condition.
2. servi…
Enumerationr/w
Enumerated Values:
1nonserviceaffect
2serviceaffect
 .1.3.6.1.4.1.2011.6.30.7.1.1.10

hwAlarmRecordClearTable

table
.1.3.6.1.4.1.2011.6.30.8.1 · 1 row entry · 2 columns
Open in standard view 
Alarm clear table. It is used to clear the active alarm by 
specified serial number through the NMS. The alarm refers to 
the alarm whose recovery alarm is not generated.
hwAlarmRecordClearEntry entry .1.3.6.1.4.1.2011.6.30.8.1.1
Alarm clear table. It is used to clear the active alarm by
specified serial number through the NMS. The alarm refers to
the alarm whose recovery alarm is not generated.
The index of this entry is hw…
Indexes
hwAlarmRecordSn
Column Syntax OID
hwAlarmRecordSn
Index of the alarm or event that is not recovered and to be cleared.
The index value is the serial number of the alarm or event.
The serial number is saved on the NMS and can be issued through the NMS.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.8.1.1.1
hwAlarmRecordAdminStatus
Recorded management status of the alarm.
Options:
1. clear(1) -indicates that the fault alarm is cleared.
2. exist(2) -indicates that the fault alarm exists.
Enumerationr/w
Enumerated Values:
1clear
2exist
 .1.3.6.1.4.1.2011.6.30.8.1.1.2

hwNotifyFilterTable

table
.1.3.6.1.4.1.2011.6.30.9.1 · 1 row entry · 4 columns
Open in standard view 
Filter table of the alarm, event and trap. 
It is used to set the filter condition of 
the alarm, event and trap through the NMS.
hwNotifyFilterEntry entry .1.3.6.1.4.1.2011.6.30.9.1.1
Filter table of the alarm, event and trap.
It is used to set the filter condition of
the alarm, event and trap through the NMS.
The indexes of this entry are hwNotifyFilterObject,
hwNotifyFilterType and …
Indexes
hwNotifyFilterObject hwNotifyFilterType hwNotifyFilterCondition
Column Syntax OID
hwNotifyFilterObject
Description of all the filter objects supported by hwNotifyFilterTable.
Options:
1. event(1) -indicates that the object to be filtered is the event.
2. alarm(2) -indica…
Enumeration
Enumerated Values:
1event
2alarm
3maintain
4snmpstd
5topo
6test
15datachange
 .1.3.6.1.4.1.2011.6.30.9.1.1.1
hwNotifyFilterType
Description of the filter type. Currently, the system supports five filter types.
Options:
1. system(1) -indicates that the object is filtered by network element (NE).
2. level(2) -indicates that the object is …
Enumeration
Enumerated Values:
1system
2level
3type
4id
5parameter
 .1.3.6.1.4.1.2011.6.30.9.1.1.2
hwNotifyFilterCondition
Detailed condition of filtering the alarm. The range is determined by
different alarm types as follows:

When the type of the object to be filtered is system(1),
hwNotifyFilterCondition can be any va…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.9.1.1.3
hwNotifyFilterRowStatus
The status of this conceptual row.
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.30.9.1.1.4

hwNotifySubTable

table obsolete
.1.3.6.1.4.1.2011.6.30.9.11 · 1 row entry · 3 columns
Open in standard view 
Alarm shielding table. It is used to set the condition of shielding the alarm.
hwNotifySubEntry entry .1.3.6.1.4.1.2011.6.30.9.11.1
Alarm shielding table. It is used to set the condition of shielding the alarm.
The index of this entry is hwNotifySubHostAddress, which is the IP address of
a trap host whose alarm is shielded.
Indexes
hwNotifySubHostAddress
Column Syntax OID
hwNotifySubHostAddress obsolete
IP address of the target host for which all the traps generated for
the alarms are shielded.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.30.9.11.1.1
hwNotifySubAdminStatus obsolete
Status of alarm shielding. Only two states are supported,
namely, received and shielded.
Options:
1. enable(1) -indicates that the alarm is received.
2. disable(2) -indicates that the alar…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.2011.6.30.9.11.1.2
hwNotifySubContentList obsolete
ID list of the alarm or event to be shielded.
It is all or the ID list (the IDs are separated with comma).
All indicates all the alarms or events.
OctetStringr/w .1.3.6.1.4.1.2011.6.30.9.11.1.3

hwNotifyFilterExtTable

table
.1.3.6.1.4.1.2011.6.30.9.12 · 1 row entry · 4 columns
Open in standard view 
Filter extended table of the alarm, event and trap. 
It is used to set the filter condition of 
the alarm, event and trap through the NMS.
hwNotifyFilterExtEntry entry .1.3.6.1.4.1.2011.6.30.9.12.1
Filter extended table of the alarm, event and trap.
It is used to set the filter condition of
the alarm, event and trap through the NMS.
The indexes of this entry are hwNotifyFilterExtObject,
hwNotifyFil…
Indexes
hwNotifyFilterExtObject hwNotifyFilterExtType hwNotifyFilterExtCondition
Column Syntax OID
hwNotifyFilterExtObject
Description of all the filter objects supported by hwNotifyFilterExtTable.
Options:
1. event(1) -indicates that the object to be filtered is the event.
2. alarm(2) -ind…
Enumeration
Enumerated Values:
1event
2alarm
3maintain
4snmpstd
5topo
6test
15datachange
 .1.3.6.1.4.1.2011.6.30.9.12.1.1
hwNotifyFilterExtType
Description of the filter type. Currently, the system supports five filter types.
Options:
1. system(1) -indicates that the object is filtered by network element (NE).
2. level(2) -indicates that the object is …
Enumeration
Enumerated Values:
1system
2level
3type
4id
5parameter
 .1.3.6.1.4.1.2011.6.30.9.12.1.2
hwNotifyFilterExtCondition
Detailed condition of filtering the alarm. It used 1-7 byte to describe
the value, and every byte is issued as a decimal numeral.
The range is determined by different alarm types as follows:

When the …
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.2011.6.30.9.12.1.3
hwNotifyFilterExtRowStatus
The status of this conceptual row.
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.30.9.12.1.4

hwTrapSynTable

table
.1.3.6.1.4.1.2011.6.30.11.1 · 1 row entry · 6 columns
Open in standard view 
Trap synchronization table. The trap synchronization function 
is used to send the trap buffered in the system to the trap 
host in a file or in the synchronization mode.
hwTrapSynEntry entry .1.3.6.1.4.1.2011.6.30.11.1.1
Trap synchronization table. The trap synchronization function
is used to send the trap buffered in the system to the trap
host in a file or in the synchronization mode.
The index of this entry is hwTrapSynType, indic…
Indexes
hwTrapSynType
Column Syntax OID
hwTrapSynType
Trap synchronization types.
Options:
1. trap(1) -indicates that all the traps are synchronized.
2. alarm(2) -indicates that only the alarm trap is synchronized.
3. alarmSub(3) -indicates that the alarm trap is…
Enumeration
Enumerated Values:
1trap
2alarm
3alarmSub
 .1.3.6.1.4.1.2011.6.30.11.1.1.1
hwTrapBufferMinSn
Minimum serial number of the trap in the trap buffer area.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.11.1.1.2
hwTrapBufferMaxSn
Maximum serial number of the trap in the trap buffer area.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.11.1.1.3
hwTrapSynBeginSn
Starting serial number of the trap that is synchronized. The value is
the serial number of the trap in the trap buffer area and can be obtained
through hwTrapBufferMinSn and hwTrapBufferMaxSn.
The hwTrapSyn…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.11.1.1.4
hwTrapSynEndSn
Ending serial number of trap that is synchronized. The value is the serial number
of the trap in the trap buffer area and can be obtained through hwTrapBufferMinSn and hwTrapBufferMaxSn.
The hwTrapSynEndSn value of -…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.11.1.1.5
hwTrapSynAdminStatus
Trap synchronization management status.
Options:
1. other(1) -other.
2. stop(2) -stop.
3. interval(3) -indicates the traps with the serial numbe…
Enumerationr/w
Enumerated Values:
1other
2stop
3interval
4all
5intervalsynfile
6allsynfile
 .1.3.6.1.4.1.2011.6.30.11.1.1.6

hwAlarmExpCtrlTable

table
.1.3.6.1.4.1.2011.6.30.12.1 · 1 row entry · 2 columns
Open in standard view 
Alarm output control table. 
It is used to query and configure whether the alarm signal 
is output through the external alarm interface.
hwAlarmExpCtrlEntry entry .1.3.6.1.4.1.2011.6.30.12.1.1
Alarm output control table.
It is used to query and configure whether the alarm signal
is output through the external alarm interface.
The index of this entry is hwAlarmEx…
Indexes
hwAlarmExpID
Column Syntax OID
hwAlarmExpID
Index of hwAlarmExpCtrlTable. It is used to configure whether
a specified alarm is output. In the configuration, the fault
alarms refer to all the fault alarms with level higher
than warning in the system.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.12.1.1.1
hwAlarmExpSign
Flag that indicates whether the alarm is output through the external
alarm interface. The values are as follows:
Options:
1. disable(1) -indicates that the alarm is not output
through the external a…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.2011.6.30.12.1.1.2

hwLogSynTable

table
.1.3.6.1.4.1.2011.6.30.13.1 · 1 row entry · 6 columns
Open in standard view 
Log synchronization table. It is used to query the minimum and maximum serial numbers of 
the logs that can be synchronized and set the condition of synchronizing the log.
hwLogSynEntry entry .1.3.6.1.4.1.2011.6.30.13.1.1
Log synchronization table. It is used to query the minimum and maximum serial numbers of
the logs that can be synchronized and set the condition of synchronizing the log.
The index of this entry is hwLogSynType. The…
Indexes
hwLogSynType
Column Syntax OID
hwLogSynType
Type of the log that is synchronized.
Currently, the logs are classified into two types.
Options:
1. operating(1) -indicates the operating log.
2. securit…
Enumeration
Enumerated Values:
1operating
2security
 .1.3.6.1.4.1.2011.6.30.13.1.1.1
hwLogMinSn
Minimum serial number of the log that can be synchronized currently.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.13.1.1.2
hwLogMaxSn
Maximum serial number of the log that can be synchronized currently.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.13.1.1.3
hwLogSynBeginSn
Starting index of the log that is synchronized. The value ranges
from hwLogMinSn to hwLogMaxSn.
The hwLogSynBeginSn value of -1 indicates there is no log synchronizing.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.13.1.1.4
hwLogSynEndSn
Ending index of the log that is synchronized. The value ranges from hwLogMinSn to
hwLogMaxSn and must be larger than hwLogSynBeginSn.
The hwLogSynEndSn value of -1 indicates there is no log synchronizing.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.13.1.1.5
hwLogSynAdminStatus
The synchronizing administration.
Options:
1.nosynmode(-1)-indicates the default status in the system.
2.interval(3) -indicates that the host should send all the log between hwLogSynBeginSn and hwLogSynEn…
Enumerationr/w
Enumerated Values:
-1nosynmode
3interval
4all
 .1.3.6.1.4.1.2011.6.30.13.1.1.6

hwLogHostTable

table deprecated
.1.3.6.1.4.1.2011.6.30.14.1 · 1 row entry · 2 columns
Open in standard view 
Querying the status of the log host configured in the current system.
hwLogHostEntry entry .1.3.6.1.4.1.2011.6.30.14.1.1
Querying the status of the log host configured in the current system.
The index of this entry is hwLogHostIP.
Indexes
hwLogHostIP
Column Syntax OID
hwLogHostIP deprecated
IP address of the log host.
It is used to obtain the host status by IP address of the log host.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.30.14.1.1.1
hwLogHostConfigStatus deprecated
Obtained status of the log host.
Options:
1. configed(1) -indicates that the log host is configured.
2. unconfiged(2) -indicates that the log host is not configured.
Enumeration
Enumerated Values:
1configed
2unconfiged
 .1.3.6.1.4.1.2011.6.30.14.1.1.2

hwSyslogHostTable

table
.1.3.6.1.4.1.2011.6.30.14.2 · 1 row entry · 8 columns
Open in standard view 
Syslog host table. It is used to set attribute of syslog host in the current system.
hwSyslogHostEntry entry .1.3.6.1.4.1.2011.6.30.14.2.1
Syslog host table. It is used to set attribute of syslog host in the current system.
The index of this table is hwSyslogHostName.
Indexes
hwSyslogHostName
Column Syntax OID
hwSyslogHostName
Syslog host name,a kind of string parameter.
Index of hwSyslogHostTable.
OctetString
Constraints:
range: 1-31
 .1.3.6.1.4.1.2011.6.30.14.2.1.1
hwSyslogHostInetAddressType
Obtained version of internet address.
Options:
1. ipv4(1) -indicates that the internet address version is IPv4.
2. ipv6(2) -indicates that the internet address version is IPv6.
Enumerationr/w
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.2011.6.30.14.2.1.2
hwSyslogHostInetAddress
IP address of the syslog host.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.6.30.14.2.1.3
hwSyslogHostFacility
List of the syslog host facility. Through this object,
the syslog host facility can be configured in batches in the format of bit-domain string.
The syslog host facility hwSyslogHostFacility is of the bit type.
The v…
Bitsr/w
Enumerated Values:
16local0
17local1
18local2
19local3
20local4
21local5
22local6
23local7
 .1.3.6.1.4.1.2011.6.30.14.2.1.4
hwSyslogHostRowStatus
The status of this conceptual row.
active(1) indicates that the log host is set to the activated state.
notInservice(2) indicates that the log host is set to the deactivated state.
createandgo(4) indicates that the…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.30.14.2.1.5
hwSyslogHostSeverity
This object indicates the list of severities of logs received by the syslog host.
This object helps set the severities of logs received by the syslog host in batches in the format of bit-domain character string.
The s…
Bitsr/w
Enumerated Values:
0emergency
1alert
2critical
3error
4warning
5notice
6informational
7debug
 .1.3.6.1.4.1.2011.6.30.14.2.1.6
hwSyslogHostTransType
Obtained version of internet address.
Options:
1. tcp(1) -indicates that the transport mode is TCP.
2. udp(2) -indicates that the transport mode is UDP.
Enumerationr/w
Enumerated Values:
1tcp
2udp
 .1.3.6.1.4.1.2011.6.30.14.2.1.7
hwSyslogHostSslPolicyName
SSL policy name,a kind of string parameter.
OctetStringr/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.2011.6.30.14.2.1.8

hwNotificationCauseTable

table
.1.3.6.1.4.1.2011.6.30.15.1 · 1 row entry · 2 columns
Open in standard view 
Alarm or event cause querying table. It is used to query the cause 
description of the alarm or event by alarm or event ID.
hwNotificationCauseEntry entry .1.3.6.1.4.1.2011.6.30.15.1.1
Alarm or event cause querying table. It is used to query the cause
description of the alarm or event by alarm or event ID.
The index of this entry is hwNotificationCa…
Indexes
hwNotificationCauseID
Column Syntax OID
hwNotificationCauseID
The index of hwNotificationCauseTable. The value is the alarm or event ID.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.15.1.1.1
hwNotificationCauseDesc
Cause description of the alarm or event.
OctetString .1.3.6.1.4.1.2011.6.30.15.1.1.2

hwTrapReliabilityConfTable

table
.1.3.6.1.4.1.2011.6.30.19.1 · 1 row entry · 3 columns
Open in standard view 
Trap reliablity table. It is used to set the reliable trap through the NMS.
hwTrapReliabilityConfEntry entry .1.3.6.1.4.1.2011.6.30.19.1.1
Trap reliablity table. It is used to set the reliable trap through the NMS.
The indexes of this entry are hwTrapReliabilityTrapType and hwTrapReliabilityTrapID.
Indexes
hwTrapReliabilityTrapType hwTrapReliabilityTrapID
Column Syntax OID
hwTrapReliabilityTrapType
Reliable trap types.
Options:
1. maintain(3) -indicates the maintenance trap.
2. snmpstd(4) -indicates the standard trap.
3. topo(5) -indicates the topological trap.
4. test(6) -indicates the test tr…
Enumeration
Enumerated Values:
3maintain
4snmpstd
5topo
6test
15datachange
 .1.3.6.1.4.1.2011.6.30.19.1.1.1
hwTrapReliabilityTrapID
Reliable trap ID, the range is 0-0xffffffff.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.6.30.19.1.1.2
hwTrapReliabilityConfRowStatus
The status of this conceptual row.
createAndGo(4) is supplied to create a new instance of a conceptual row.
destroy(6) is supplied to delete the instances associated with an existing conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.2011.6.30.19.1.1.3