CERAGON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

122

Rows

122

Columns

972

gnGenCfgDeviceTable

table mandatory

.1.3.6.1.4.1.2281.2.1.8 · 1 row entry · 27 columns

Open in standard view

This table contains general configuration info
per device, local and remote.

gnGenCfgDeviceEntry entry .1.3.6.1.4.1.2281.2.1.8.1

Entry containing general configuration information, for both local and
remote sides.

Indexes

gnGenCfgDeviceId

Column Syntax OID

gnGenCfgDeviceId mandatory

This value indicates the device table entry (local or
Remote).

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.2281.2.1.8.1.1

gnGenCfgDeviceResetPerfMon mandatory

Reset performance monitoring.

Enumerationr/w

Enumerated Values:

2	reset
3	noAction
4	clearFastEthernetStatistics

.1.3.6.1.4.1.2281.2.1.8.1.2

gnGenCfgDeviceOperation mandatory

This parameter allows the NMS to perform operations.
(3) will implement software RESET
(4) will SET all factory default configurations, including IP address!
(5) will CLEAR IDU software
NOTE: CLEARING IDU software wil…

Enumerationr/w

Enumerated Values:

2	noOperation
3	softwareReset
4	setDefaultConf
5	clearMainManagerSoftware
6	resetODU
7	resetMUX
8	resetSwOdu

.1.3.6.1.4.1.2281.2.1.8.1.3

gnGenCfgActivateLoopback mandatory

This parameter controls the loop back diagnostics operations.
For remote units, only SPI, MUX and MDM loopbacks are allowed.

Enumerationr/w

Enumerated Values:

2	noOperation
3	loopbackSPI
5	loopbackMDM
6	loopbackOuterSPI
10	localODUloopback

.1.3.6.1.4.1.2281.2.1.8.1.4

gnGenCfgF1DataChanConnector mandatory

This is the physical interface of the F1 line data channel
(USER CHANNEL connection).

Enumeration

Enumerated Values:

1	noInterface
2	rs232db25
3	v35
4	rs422db25
5	rj45CoDirect
6	rj45bridge
7	x21db15
8	rs232db9

.1.3.6.1.4.1.2281.2.1.8.1.5

gnGenCfgWaySideConnector mandatory

This is the physical interface of the radio E1 way side channel
(WAYSIDE CHANNEL connection).

Enumeration

Enumerated Values:

1	noInterface
2	rs232db25
3	v35
4	rs422db25
5	connectorE1
6	rj45bridge
7	x21db15
8	connectorT1
9	lineSTM4
10	clockUnit2M
11	clockUnit1dot5M

.1.3.6.1.4.1.2281.2.1.8.1.6

gnGenCfgActivateChanLoopback mandatory

This parameter controls the USER CHANNEL and WAYSIDE channel
loopback diagnostic operations.
(3) will activate the 64k data channel loopback (USER CHANNEL)
(4) will activate the WAYSIDE CHANNEL loopback.

Enumerationr/w

Enumerated Values:

2	noOperation
3	loopbackDataChan
4	loopbackWaySide

.1.3.6.1.4.1.2281.2.1.8.1.7

gnGenCfgInterLenLocalOnly mandatory

This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! .
WRITE will change the local side only.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.8.1.8

gnGenCfgSlipIp mandatory

This is the SERIAL interface IP address.
Included for future development, not currently supported.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.1.8.1.9

gnGenCfgSlipModemConnection mandatory

The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567).

RFC1213-MIBDisplayStringr/w

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.1.8.1.10

gnGenCfgSlipSpeed mandatory

The SERIAL interface baud rate.

Enumerationr/w

Enumerated Values:

1	baud9600
2	baud19200
3	baud38400
4	baud57600
5	baud115200

.1.3.6.1.4.1.2281.2.1.8.1.11

gnGenCfgAlarmSeverity mandatory

This field is used only by the element management
application
Every Trap severity 4 bits.
15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options.
The first 4 bits ODU Power supply severity,
then the Synthesizer severi…

OctetStringr/w

Constraints:
range: 15-15

.1.3.6.1.4.1.2281.2.1.8.1.12

gnGenCfgODUSerialNumber mandatory

This is the ODU serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.8.1.13

gnGenCfgIDUSerialNumber mandatory

This is the IDU serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.8.1.14

gnGenCfgAlarmText mandatory

The private trap text, describing the last generated trap text.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.1.8.1.15

gnGenCfgTrapSeverity mandatory

The current Trap severity, describing the last generated trap
severity

Enumeration

Enumerated Values:

0	clear
1	event
3	warning
7	minor
15	major
31	critical

.1.3.6.1.4.1.2281.2.1.8.1.16

gnGenCfgProductType mandatory

The product type.

Enumeration

Enumerated Values:

2	accessMux
3	sdhRegenerator
4	narrowBandPdhRepeater
5	accessMuxStm0
6	plex6200
7	adm

.1.3.6.1.4.1.2281.2.1.8.1.17

gnGenCfgLeftMediumConnector mandatory

For ACCESS hardware, this indicates the first (left) interface connector.

Enumeration

Enumerated Values:

1	noInterface
2	twoDS3
3	oneDS3
4	twoE3
5	oneE3
6	oneFastEthernet
7	fiberSTM1
8	electricalSTM1
9	utpSTM1
10	stpSTM1
11	twoSTM1
12	eightE1
13	eightT1
14	hitLess
15	fiberSTM1Trib
16	electricalSTM1Trib
17	hitLessWithBridge
18	opticalFastEthernet

.1.3.6.1.4.1.2281.2.1.8.1.18

gnGenCfgMiddleMediumConnector mandatory

For ACCESS hardware, this indicates the second (right)interface connector.

Enumeration

Enumerated Values:

1	noInterface
2	twoDS3
3	oneDS3
4	twoE3
5	oneE3
6	oneFastEthernet
7	fiberSTM1
8	electricalSTM1
9	utpSTM1
10	stpSTM1
11	twoSTM1
12	eightE1
13	eightT1
14	hitLess
15	fiberSTM1Trib
16	electricalSTM1Trib
17	hitLessWithBridge
18	opticalFastEthernet

.1.3.6.1.4.1.2281.2.1.8.1.19

gnGenCfgPrimaryClockSource mandatory

The primary clock source, configurable for ACCESS radios only.

Enumerationr/w

Enumerated Values:

2	internalClock
3	external2MB
4	radioClock
5	fiberClock
6	external2MHz
7	external1AndHalfMB
8	tributaryClock1
9	tributaryClock2
10	tributaryClock3
11	tributaryClock4
12	tributaryClock5
13	tributaryClock6
14	tributaryClock7
15	tributaryClock8
16	tributaryClock9
17	tributaryClock10
18	tributaryClock11
19	tributaryClock12
20	tributaryClock13
21	tributaryClock14
22	tributaryClock15
23	tributaryClock16
24	tribSTM1

.1.3.6.1.4.1.2281.2.1.8.1.20

gnGenCfgSecondaryClockSource mandatory

The secondary clock source, configurable for ACCESS radios only.

Enumerationr/w

Enumerated Values:

2	internalClock
3	external2MB
4	radioClock
5	fiberClock
6	external2MHz
7	external1AndHalfMB
8	tributaryClock1
9	tributaryClock2
10	tributaryClock3
11	tributaryClock4
12	tributaryClock5
13	tributaryClock6
14	tributaryClock7
15	tributaryClock8
16	tributaryClock9
17	tributaryClock10
18	tributaryClock11
19	tributaryClock12
20	tributaryClock13
21	tributaryClock14
22	tributaryClock15
23	tributaryClock16
24	tribSTM1

.1.3.6.1.4.1.2281.2.1.8.1.21

gnGenCfgTrapOption mandatory

This item defines various trap options (0-31):

0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER)
1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER)
2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU)
…

Integer32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2281.2.1.8.1.22

gnGenCfgCLLI mandatory

Common Language Location Identifier (maximum length: 30)

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.2281.2.1.8.1.23

gnGenCfgHeartbeatPeriod mandatory

This item defines the number of minutes between each trap

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.8.1.24

gnGenCfgGetRemoteData mandatory

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.2.1.8.1.25

gnGenCfgClearLoopTimeout mandatory

This item defines the clear loopbacks timeout in minutes.
possible values: 0..1440.
0 means disable.

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.2281.2.1.8.1.26

gnGenCfgSubProductType mandatory

lsb bit: 1 if 1500i or 1528i 0 otherwise.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.8.1.27

gnGenStatDeviceTable

table mandatory

.1.3.6.1.4.1.2281.2.1.9 · 1 row entry · 12 columns

Open in standard view

This table contains general configuration info
per device; local and remote.

gnGenStatDeviceEntry entry .1.3.6.1.4.1.2281.2.1.9.1

Entry containing general configuration information per device, both
local and remote sides.

Indexes

gnGenStatDeviceId

Column Syntax OID

gnGenStatDeviceId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

1	local
2	remote
3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.1.9.1.1

gnGenStatDeviceCelsiusTemp mandatory

This is the temperature of the modem of the IDU in degrees of
Celsius.

Integer32

Constraints:
range: -10-70

.1.3.6.1.4.1.2281.2.1.9.1.2

gnGenStatDeviceFahrenheitTemp mandatory

This is the temperature of the modem of the IDU in degrees of
Fahrenheit.

Integer32

Constraints:
range: 14-158

.1.3.6.1.4.1.2281.2.1.9.1.3

gnGenStatDevicePowerSupply mandatory

This octet represents the status of the power
supplies of the IDU:
bit 1 on = 3.3V faulty
bit 2 on = -5V faulty
bit 3 on = 5V faulty.
bit 4 on = +8V faulty

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.9.1.4

gnGenStatDeviceCable mandatory

Status of the cable to the ODU.

Enumeration

Enumerated Values:

2	ok
3	short
4	open

.1.3.6.1.4.1.2281.2.1.9.1.5

gnGenStatDeviceDryContact mandatory

The status of the dry contacts, Each input status is represented by a bit.
When the input is on, the bit value is 0.When the input is off, the bit
value is 1.
The MSB represents external alarm 8. For example when only e…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.2.1.9.1.6

gnGenStatDeviceLeds mandatory

The status of the IDU front panel LEDs. For the management station use.

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.2281.2.1.9.1.7

gnGenStatInternalCommunication mandatory

The status of internal communication problem
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.9.1.8

gnGenStatDeviceFanStatus mandatory

The status of the IDU fans 1-2 or 1-4.
bit 1 = IDU Fan1 is faulty.
bit 2 = IDU Fan2 is faulty.
bit 3 = IDU Fan2 is faulty.
bit 4 = IDU Fan2 is faulty.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.9.1.9

gnGenStatDeviceODUStatus mandatory

ODU status reported with this parameter.
Bit1 is MSB. The bit is set when a fault occurs.
The bit is cleared when the fault clears.
bit 1 = Power Supply status
bit 2 = Synthesizer lock status
bit 3 = Tx level status
bit…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.2.1.9.1.10

gnGenStatDeviceIDUStatus mandatory

IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
cleared when the fault clears.

bit 1 = Power status
bit 2 = Cable open status
bit 3 = Cable short s…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.2.1.9.1.11

gnGenStatDeviceRSTStatus mandatory

The bit is set when a fault occurs. The bit is
cleared when the fault clears.

bit 1 = Line loss of frame status
bit 2 = Radio loss of frame status
bit 3 = Line EXC status
bit 4 = Radio EXC status
bit 5 =…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.2.1.9.1.12

gnGenIdcCfgTable

table mandatory

.1.3.6.1.4.1.2281.2.1.21 · 1 row entry · 16 columns

Open in standard view

gnGenIdcCfgEntry entry .1.3.6.1.4.1.2281.2.1.21.1

Indexes

gnGenIdcCfgId

Column Syntax OID

gnGenIdcCfgId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.2.1.21.1.1

gnGenIdcCfgXpicMode mandatory

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.21.1.2

gnGenIdcCfgResetPerfMon mandatory

Reset performance monitoring.

Enumerationr/w

Enumerated Values:

2	reset
3	noAction
4	clearFastEthernetStatistics

.1.3.6.1.4.1.2281.2.1.21.1.3

gnGenIdcCfgOperation mandatory

Enumerationr/w

Enumerated Values:

2	noOperation
3	softwareReset
4	setDefaultConf
5	setIDCDefaultConf
6	hardwareColdReset
7	hardwareSoftReset

.1.3.6.1.4.1.2281.2.1.21.1.4

gnGenIdcCfgWaySideConnector mandatory

This is the physical interface of the radio E1 way side channel
(WAYSIDE CHANNEL connection).

Enumeration

Enumerated Values:

1	noInterface
2	connectorE1
3	connectorT1
4	connectorDualE1
5	connectorDualT1
6	connectorDual10baseT

.1.3.6.1.4.1.2281.2.1.21.1.5

gnGenIdcCfgHeartbeatPeriod mandatory

This item defines the number of minutes between each trap

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.21.1.6

gnGenIdcCfgClearLoopTimeout mandatory

This item defines the clear loopbacks timeout in minutes.
possible values: 0..1440.
0 means disable.

Integer32r/w

Constraints:
range: 0-1440

.1.3.6.1.4.1.2281.2.1.21.1.7

gnGenIdcCfgSlipIp mandatory

This is the SERIAL interface IP address.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.1.21.1.8

gnGenIdcCfgSlipModemConnection mandatory

The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567).

RFC1213-MIBDisplayStringr/w

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.1.21.1.9

gnGenIdcCfgSlipSpeed mandatory

The SERIAL interface baud rate.

Enumerationr/w

Enumerated Values:

1	baud9600
2	baud19200
3	baud38400
4	baud57600
5	baud115200

.1.3.6.1.4.1.2281.2.1.21.1.10

gnGenIdcCfgAlarmSeverity mandatory

This field is used only by the element management application.

OctetStringr/w

Constraints:
range: 15-15

.1.3.6.1.4.1.2281.2.1.21.1.11

gnGenIdcCfgIDUSerialNumber mandatory

This is the IDU serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.21.1.12

gnGenIdcCfgTrapOption mandatory

This item defines various trap options (0-15):

0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER)
1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER)
2 - SNSN, DNLR (DO NOT REPORT LOCAL TRAPS FROM REMOTE IDU)
…

Integer32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2281.2.1.21.1.13

gnGenIdcCfgCLLI mandatory

Common Language Location Identifier (maximum length: 30)

OctetStringr/w

Constraints:
range: 0-30

.1.3.6.1.4.1.2281.2.1.21.1.14

gnGenIdcCfgEowCascadeStatus mandatory

Not used!!.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.21.1.15

gnGenIdcCfgSerialPPPAdminStatus mandatory

Enable\Disable PPP over serial interface.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.21.1.16

gnGenIdcStatTable

table mandatory

.1.3.6.1.4.1.2281.2.1.22 · 1 row entry · 17 columns

Open in standard view

gnGenIdcStatEntry entry .1.3.6.1.4.1.2281.2.1.22.1

Indexes

gnGenIdcStatId

Column Syntax OID

gnGenIdcStatId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.2.1.22.1.1

gnGenIdcStatXpicSupport mandatory

Enumeration

Enumerated Values:

2	yes
3	no

.1.3.6.1.4.1.2281.2.1.22.1.2

gnGenIdcStatLeds mandatory

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.2281.2.1.22.1.3

gnGenIdcStatIDUStatus mandatory

IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
cleared when the fault clears.

bit 1 = Fans status
bit 2 = configuration mismatch
bit 3 = Internal …

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.2281.2.1.22.1.4

gnGenIdcStatMMCCardStatus mandatory

Bit1 is MSB.
bit 1 = 0=MMC card exist, 1=MMC card not exist
bit 2 = MMC card status: 0=ok, 1=fault

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.22.1.5

gnGenIdcStatDryContact mandatory

The status of the dry contacts, Each input status is represented by a bit.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.2.1.22.1.6

gnGenIdcStatFanStatus mandatory

The status of the IDU fans 1-2 or 1-4.
bit 1 = IDU Fan1 is faulty.
bit 2 = IDU Fan2 is faulty.
bit 3 = IDU Fan2 is faulty.
bit 4 = IDU Fan2 is faulty.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.22.1.7

gnGenIdcStatLeftDrawerStatus mandatory

Enumeration

Enumerated Values:

2	noDrawer
3	drawerDown
4	drawerUp

.1.3.6.1.4.1.2281.2.1.22.1.8

gnGenIdcStatRightDrawerStatus mandatory

Enumeration

Enumerated Values:

2	noDrawer
3	drawerDown
4	drawerUp

.1.3.6.1.4.1.2281.2.1.22.1.9

gnGenIdcStatHitlessSupport mandatory

Indication for hitless support.

Enumeration

Enumerated Values:

2	supported
3	notSupported

.1.3.6.1.4.1.2281.2.1.22.1.10

gnGenIdcStatEowExistence mandatory

This parameter sight physical existence of the EOW connector.

Enumeration

Enumerated Values:

2	exist
3	notExist

.1.3.6.1.4.1.2281.2.1.22.1.11

gnGenIdcStatEowSupport mandatory

Indication for EOW (cascade) support.

Enumeration

Enumerated Values:

2	supported
3	notSupported

.1.3.6.1.4.1.2281.2.1.22.1.12

gnGenIdcStatIduPosition mandatory

Indication for idu position.

Enumeration

Enumerated Values:

2	upper
3	lower
4	single

.1.3.6.1.4.1.2281.2.1.22.1.13

gnGenIdcStatBoardType mandatory

Indication for the board type.

Enumeration

Enumerated Values:

2	v1
3	v2

.1.3.6.1.4.1.2281.2.1.22.1.14

gnGenIdcStatAgentIPAddress mandatory

Indication for the Agent IP address.

RFC1155-SMIIpAddress

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.1.22.1.15

gnGenIdcStatInterfaceConnector mandatory

Indication for the interface connector type.

Enumeration

Enumerated Values:

2	notExist
3	oneFEplus64E1
4	twoFEplus64E1

.1.3.6.1.4.1.2281.2.1.22.1.16

gnGenIdcStatIfTableCounter mandatory

This counter is initialize to a random number and increment on every change of the IfTable
(This is for NMS use).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.22.1.17

gnGeneralXTable

table mandatory

.1.3.6.1.4.1.2281.2.1.23 · 1 row entry · 33 columns

Open in standard view

gnGeneralXEntry entry .1.3.6.1.4.1.2281.2.1.23.1

Indexes

gnGenXId

Column Syntax OID

gnGenXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.1.23.1.1

gnGenXStandardOrg mandatory

This parameter specifies which international standard is used.

Enumeration

Enumerated Values:

2	etsi
3	fcc
4	japan
5	lmds
6	cmds
7	australia
8	other

.1.3.6.1.4.1.2281.2.1.23.1.2

gnGenXRemoteConnection mandatory

Is the connection between the local manager and
the remote manager.

Enumeration

Enumerated Values:

2	connected
3	disconnected

.1.3.6.1.4.1.2281.2.1.23.1.3

gnGenXLinkId mandatory

0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.23.1.4

gnGenXModemType mandatory

The system modem type.

Enumeration

Enumerated Values:

2	gn16QAM
3	gn32QAM
4	gn128QAM
5	gn256QAM
6	gn64QAM
7	gn4QAM

.1.3.6.1.4.1.2281.2.1.23.1.5

gnGenXRadioSide mandatory

Enumerationr/w

Enumerated Values:

2	east
3	west

.1.3.6.1.4.1.2281.2.1.23.1.6

gnGenXSystemWorkTime mandatory

The System Work Time (hours).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.23.1.7

gnGenXOperation mandatory

Enumerationr/w

Enumerated Values:

2	noOperation
3	setMuxDefaultConf
4	hardwareColdReset
5	hardwareWarmReset
6	softwareODCReset
7	hardwareODCReset
8	resetAllDrawers

.1.3.6.1.4.1.2281.2.1.23.1.8

gnGenXResetPerfMon mandatory

Reset performance monitoring.

Enumerationr/w

Enumerated Values:

2	reset
3	noAction
4	clearFastEthernetStatistics

.1.3.6.1.4.1.2281.2.1.23.1.9

gnGenXAlarmSeverity mandatory

This field is used only by the element management
application Every Trap severity 4 bits.
15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options.
The first 4 bits ODU Power supply severity,
then the Synthesizer severi…

OctetStringr/w

Constraints:
range: 15-15

.1.3.6.1.4.1.2281.2.1.23.1.10

gnGenXCarrierSerialNumber mandatory

This is the carrier serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.23.1.11

gnGenXMUXSerialNumber mandatory

This is the MUX serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.23.1.12

gnGenXProductType mandatory

The product type.

Enumeration

Enumerated Values:

2	accessMux
3	sdhRegenerator
4	narrowBandPdhRepeater
5	accessMuxStm0
6	plex6200
7	adm

.1.3.6.1.4.1.2281.2.1.23.1.13

gnGenXCarrierConnector mandatory

For ACCESS hardware, this indicates the first (left) interface connector.

Enumeration

Enumerated Values:

2	noInterface
3	oneElectricalSTM1
4	oneFiberSTM1SingleMode
5	oneFiberSTM1MultiMode
6	twoElectricalSTM1
7	twoFiberSTM1SingleMode
8	twoFiberSTM1MultiMode
9	oneFEOnly
10	oneFEplus4E1
11	oneFEplus8E1
12	oneFEplus4T1
13	oneFEplus8T1
14	twoFEOnly
15	twoFEplus4E1
16	twoFEplus8E1
17	twoFEplus4T1
18	twoFEplus8T1
19	oneDS3
20	threeDS3
21	oneE3
22	threeE3
23	oneOpticalGBEOnly
24	oneOpticalGBEPlus8E1
25	oneOpticalGBEPlus8T1
26	oneElectricalGBEOnly
27	oneElectricalGBEPlus8E1
28	oneElectricalGBEPlus8T1
29	oneFEplus64E1
30	oneFEplus64T1
31	eightE1Only
32	eightT1Only
33	oneStm1XC
34	twoStm1XC

.1.3.6.1.4.1.2281.2.1.23.1.14

gnGenXInterfacesLeds mandatory

The status of the Interface LEDs. For the management station use.
Each two bits represents one led as follows: 00 - Gray, 01 - Green, 10 - Orange, 11 - Red.
The led order: Led1 is msb 2 bits , after it led2, till led 16…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.2.1.23.1.15

gnGenXMultiRateMultiConsConf mandatory

The Link data capacity

Enumerationr/w

Enumerated Values:

1	mrmc1528
2	mrmc1550
3	mrmc3156
4	mrmc3150
5	mrmc1228
6	mrmc1540
7	mrmc4410
8	mrmc4420
9	mrmc4440
10	mrmc1125
11	mrmc2050
12	mrmc2030
13	mrmc1340
18	mrmc3756
24	acm56
25	acm50
26	acm28

.1.3.6.1.4.1.2281.2.1.23.1.16

gnGenXMultiRateMultiConsSupport mandatory

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.2.1.23.1.17

gnGenXWaysideChannel mandatory

Enable Disable drawer wayside channel

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.23.1.18

gnGenXWaySideLoopback mandatory

This parameter controls the WAYSIDE channel loopback diagnostic operations.

Enumerationr/w

Enumerated Values:

2	noloopback
3	waySideLoop

.1.3.6.1.4.1.2281.2.1.23.1.19

gnGenXSyncIdcDataBase mandatory

Enumerationr/w

Enumerated Values:

2	noOperation
3	idcToDrawer
4	drawerToIdc

.1.3.6.1.4.1.2281.2.1.23.1.20

gnGenXAesEnable mandatory

This parameter defines encryption admin mode.

Enumeration

Enumerated Values:

2	enable
3	disable
4	notSupport
5	systemFailure

.1.3.6.1.4.1.2281.2.1.23.1.21

gnGenXAesMkeyMode mandatory

This parameter is not used.

Enumeration

Enumerated Values:

2	auto
3	manual

.1.3.6.1.4.1.2281.2.1.23.1.22

gnGenXActNumOfInterfaceOnClass1 mandatory

This value indicates the actual number of interfaces on class 1.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.23.1.23

gnGenXActNumOfInterfaceOnClass2 mandatory

This value indicates the actual number of interfaces on class 2.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.23.1.24

gnGenXActNumOfInterfaceOnClass3 mandatory

This value indicates the actual number of interfaces on class 3.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.23.1.25

gnGenXEowStatus mandatory

Not used.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.23.1.26

gnGenXTempLicenseEnable mandatory

Set temporary license enable or disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable
4	notSupported

.1.3.6.1.4.1.2281.2.1.23.1.27

gnGenXTempLicenseTimer mandatory

This value indicates the temporary license timer.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.2.1.23.1.28

gnGenXDefectBlocks mandatory

The number of defected blocks that could not be corrected by the
FEC

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.23.1.29

gnGenXBytesCorrected mandatory

Number of bytes corrected by the FEC

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.23.1.30

gnGenXPrbsTest mandatory

This parameter enable the user to activate the PRBS test.

Enumerationr/w

Enumerated Values:

2	notActive
3	active

.1.3.6.1.4.1.2281.2.1.23.1.31

gnGenXClearCounters mandatory

This parameter enable the user to clear the PRBS counters.

Enumerationr/w

Enumerated Values:

2	noAction
3	clearCounters

.1.3.6.1.4.1.2281.2.1.23.1.32

gnGenXMuxLicense mandatory

Inidcation for license features.
Bit #0-#4 - Ethernet througput limit.

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.2.1.23.1.33

gnGeneralMrmcXTable

table mandatory

.1.3.6.1.4.1.2281.2.1.26 · 1 row entry · 6 columns

Open in standard view

gnGeneralMrmcXEntry entry .1.3.6.1.4.1.2281.2.1.26.1

This table indicates the supported modem configuration script for each drawer.

Indexes

gnGenMrmcXId gnGenMrmcXMrmcVal

Column Syntax OID

gnGenMrmcXId mandatory

Drawer number.

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.1.26.1.1

gnGenMrmcXMrmcVal mandatory

This parameter specifies MRMC value.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.26.1.2

gnGenMrmcXBitRate mandatory

This parameter specifies transfer bit rate.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.26.1.3

gnGenMrmcXBandWidth mandatory

This parameter specifies channel band width.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.26.1.4

gnGenMrmcXQam mandatory

This parameter specifies modem qam.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.26.1.5

gnGenMrmcXScriptType mandatory

This parameter specifies the type of the script.
v1 - Regular MRMC script.
v2 - ACM MRMC script.

Enumeration

Enumerated Values:

2	v1
3	v2

.1.3.6.1.4.1.2281.2.1.26.1.6

gnGenDrawerXTable

table mandatory

.1.3.6.1.4.1.2281.2.1.27 · 1 row entry · 7 columns

Open in standard view

This table indicates drawer x.

gnGenDrawerXEntry entry .1.3.6.1.4.1.2281.2.1.27.1

Entry containing drawer x namd and id.

Indexes

gnGenDrawerXId

Column Syntax OID

gnGenDrawerXId mandatory

This value indicates the drawer's id

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.1.27.1.1

gnGenDrawerXName mandatory

This value indicates the drawer's name

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.27.1.2

gnGenDrawerXSlot1Status mandatory

notExist - board not exist.
powerOff - board inserted and power off.
powerOn - board inserted and power on.
dbReady - board is power on and DB ready.

Enumeration

Enumerated Values:

2	notExist
3	powerOff
4	powerOn
5	dbReady

.1.3.6.1.4.1.2281.2.1.27.1.3

gnGenDrawerXSlot2Status mandatory

notExist - board not exist.
powerOff - board inserted and power off.
powerOn - board inserted and power on.
dbReady - board is power on and DB ready.

Enumeration

Enumerated Values:

2	notExist
3	powerOff
4	powerOn
5	dbReady

.1.3.6.1.4.1.2281.2.1.27.1.4

gnGenDrawerXDeviceLeds mandatory

The status of the IDU front panel LEDs. For the management station use.

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.2281.2.1.27.1.5

gnGenDrawerXInternalCommunication mandatory

The status of internal communication problem
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.27.1.6

gnGenDrawerXDeviceIDUStatus mandatory

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.2.1.27.1.7

addressesTable

table mandatory

.1.3.6.1.4.1.2281.2.1.28.2 · 1 row entry · 2 columns

Open in standard view

This table indicates the cluster's IP Addresses.

addressesEntry entry .1.3.6.1.4.1.2281.2.1.28.2.1

Entry containing the cluster's IP Addresses.

Indexes

addressesPeerIPId

Column	Syntax	OID
addressesPeerIPId mandatory This value indicates the peer IP id	Integer32 Constraints: `range: 1-9`	`.1.3.6.1.4.1.2281.2.1.28.2.1.1`
addressesPeerIPAddress mandatory This value indicates the IP address of a Server/Client.	RFC1155-SMIIpAddress Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.2281.2.1.28.2.1.2`

backplaneSlotMappingTable

table mandatory

.1.3.6.1.4.1.2281.2.1.28.4 · 1 row entry · 7 columns

Open in standard view

This table indicates the cluster's IP Addresses.

backplaneSlotMappingEntry entry .1.3.6.1.4.1.2281.2.1.28.4.1

Entry containing the cluster's IP Addresses.

Indexes

backplaneSlotMappingSubrackId backplaneSlotMappingFloorId backplaneSlotMappingDrawerId backplaneSlotMappingSubDrawerId

Column Syntax OID

backplaneSlotMappingSubrackId mandatory

This value indicates the subrack index.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.2281.2.1.28.4.1.1

backplaneSlotMappingFloorId mandatory

This value indicates the floor id
The 4U floor index (upper) will be 99.

Integer32

Constraints:
range: 1-100

.1.3.6.1.4.1.2281.2.1.28.4.1.2

backplaneSlotMappingDrawerId mandatory

For floors 1-3: IDC=1, Drawer 1=2, Drwaer2 =3. For 4U floor (floor #99), Aux=1, Power=2.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.2281.2.1.28.4.1.3

backplaneSlotMappingSubDrawerId mandatory

This value indicates the sub drawer id
IDC, Drawer 1 & 2 will be only 1. XC main (up) will be 1 and XC backup (lower) will be 2.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.2281.2.1.28.4.1.4

backplaneSlotMappingUnitType mandatory

The values are the same as in gnAgnCurrentAlarm Unit.

Enumeration

Enumerated Values:

2	idc
3	odu
4	mux
5	modem
6	drawer
7	unknown
8	none
9	xc
10	auxInterface
11	power

.1.3.6.1.4.1.2281.2.1.28.4.1.5

backplaneSlotMappingUnitNumber mandatory

This value indicates the unit number.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.2.1.28.4.1.6

backplaneSlotMappingUnitIndex mandatory

This value indicates the unit number.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.28.4.1.7

powerInputTable

table mandatory

.1.3.6.1.4.1.2281.2.1.29.1 · 1 row entry · 4 columns

Open in standard view

This table indicates the Power Input.

powerInputEntry entry .1.3.6.1.4.1.2281.2.1.29.1.1

Entry containing the Power Input.

Indexes

powerInputId

Column Syntax OID

powerInputId mandatory

This value indicates the power input Id.

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.2281.2.1.29.1.1.1

powerInputAdmin mandatory

This value indicates whether the power input Admin is enables or disabled.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.1.29.1.1.2

powerInputStatus mandatory

This value indicates whether the power input is up or down, Notexist when power input card not exist. unknown when no A-Aux.

Enumeration

Enumerated Values:

2	notexist
3	unknown
4	down
5	up

.1.3.6.1.4.1.2281.2.1.29.1.1.3

powerInputLedStatus mandatory

This value, Led1 is MSB 2 bits.
Each two bits represents one led:00 - Gray,01 - Blue.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.29.1.1.4

xcDrawerTable

table mandatory

.1.3.6.1.4.1.2281.2.1.29.3 · 1 row entry · 11 columns

Open in standard view

This table indicates the XC Drawer.

xcDrawerEntry entry .1.3.6.1.4.1.2281.2.1.29.3.1

Entry containing the XC Drawer.

Indexes

xcDrawerXCId

Column Syntax OID

xcDrawerXCId mandatory

This value, 1-2 for 1st rack, 3-4 for 2nd, 5-6 for 3rdy.

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.2281.2.1.29.3.1.1

xcDrawerLedsStatus mandatory

This value, Led1 is MSB 2 bits, Led4 is LSB .
Each two bits represents one led:00 - Gray,01 - Green, 10 - Orange, 11 - Red.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.1.29.3.1.2

xcDrawerBoardHWVersion mandatory

This value indicates the EEPROM value.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.1.29.3.1.3

xcDrawerBoardFWVersion mandatory

This value indicates the Register value .

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.29.3.1.4

xcDrawerBoardPostResetFWVersion mandatory

This value indicates the Register value .

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.29.3.1.5

xcDrawerSerialNumber mandatory

This value indicates the EEPROM value.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.1.29.3.1.6

xcDrawerResetXCBoard mandatory

This value indicates whether to reset XC.

Enumerationr/w

Enumerated Values:

2	noaction
3	reset

.1.3.6.1.4.1.2281.2.1.29.3.1.7

xcDrawerXCSelfTestResult mandatory

This value indicates the XC self test result.

Enumeration

Enumerated Values:

2	passed
3	failed

.1.3.6.1.4.1.2281.2.1.29.3.1.8

xcDrawerXCActivityRole mandatory

This value indicates the XC activity role.

Enumeration

Enumerated Values:

2	active
3	standby

.1.3.6.1.4.1.2281.2.1.29.3.1.9

xcDrawerSyncIdcDataBase mandatory

Enumerationr/w

Enumerated Values:

2	noOperation
3	idcToXC
4	xcToIdc

.1.3.6.1.4.1.2281.2.1.29.3.1.10

xcDrawerXCConnector mandatory

This value indicates the XC activity role.

Enumeration

Enumerated Values:

oneStm1XC

.1.3.6.1.4.1.2281.2.1.29.3.1.11

gnGenCarrierXTable

table mandatory

.1.3.6.1.4.1.2281.2.1.30 · 1 row entry · 3 columns

Open in standard view

This table indicates carrier x.

gnGenCarrierXEntry entry .1.3.6.1.4.1.2281.2.1.30.1

Entry of carrier x.

Indexes

gnGenCarrierXId

Column Syntax OID

gnGenCarrierXId mandatory

This value indicates the carrier id

Enumeration

Enumerated Values:

3	carrier1
4	carrier2

.1.3.6.1.4.1.2281.2.1.30.1.1

gnGenCarrierXResetPerfMon mandatory

Reset performance monitoring.

Enumerationr/w

Enumerated Values:

2	reset
3	noAction

.1.3.6.1.4.1.2281.2.1.30.1.2

gnGenCarrierXSyncIdcDataBase mandatory

idcToDrawer - copy configuration from the IDC disk to the HW (this operation istraffic effected).
drawerToIdc - copy configuration from HW to IDC disk.
this operation used to clear User Configuration Mismatch alarm.
idc…

Enumerationr/w

Enumerated Values:

2	noOperation
3	idcToDrawer
4	drawerToIdc
5	idcToAllDrawers

.1.3.6.1.4.1.2281.2.1.30.1.3

gnAgnMgrTable

table mandatory

.1.3.6.1.4.1.2281.2.2.1 · 1 row entry · 5 columns

Open in standard view

This table indicates the managers list that will receive traps.

gnAgnMgrEntry entry .1.3.6.1.4.1.2281.2.2.1.1

Entry containing the managers IP addresses and the trap filter options.

Indexes

gnAgnMgrId

Column	Syntax	OID
gnAgnMgrId mandatory This value indicates an index of a specific manager	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.2.2.1.1.1`
gnAgnMgrIP mandatory This value indicates the managers IP address. WRITE an IP address of all zeroes (0.0.0.0) will remove the entry.	RFC1155-SMIIpAddressr/w Textual Convention: RFC1155-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.2281.2.2.1.1.2`
gnAgnMgrAlarmGroupMask mandatory bit mask .1 is 'send a trap' 0 is 'dont send a trap'. The list of alarms from MSB to LSB is: bit 1 = Power Supply Alarm bit 2 = Cable Alarm bit 3 = Temperature Alarm bit 4 = External Alarm …	OctetStringr/w Constraints: `range: 2-2`	`.1.3.6.1.4.1.2281.2.2.1.1.3`
gnAgnMgrSeverityFilter mandatory This is a bit mask value for masking traps according to its severity. There is a bit for each severity. If the relevant bit is on (1), then the Agent will send traps with this severity, and it won't send if the bit …	OctetStringr/w Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.2.2.1.1.4`
gnAgnMgrTrapPort mandatory The Port for sending the trap for each manager (possible values: 70-65535)	Integer32r/w Constraints: `range: 70-65535`	`.1.3.6.1.4.1.2281.2.2.1.1.5`

gnAgnLogFileTable

table mandatory

.1.3.6.1.4.1.2281.2.2.2.4 · 1 row entry · 26 columns

Open in standard view

This table is the agents alarm and event log file.

gnAgnLogFileEntry entry .1.3.6.1.4.1.2281.2.2.2.4.1

Entry containing the agents alarm and event log file.

Indexes

gnAgnLogFileId

Column Syntax OID

gnAgnLogFileId mandatory

This value indicates the index of an alarm logfile entry.
Entry 1 is the most recent logfile
event

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.1

gnAgnLogFileValid mandatory

This value indicates the validity of the indexed alarm logfile entry.
a VALID log entry is (2) and an INVALID entry is (3).

Enumeration

Enumerated Values:

2	valid
3	notvalid

.1.3.6.1.4.1.2281.2.2.2.4.1.2

gnAgnLogFileDate mandatory

This field is the date the alarm occurred, formatted as YYYY-MM-DD.
YYYY represents the year, MM the month and DD -the day.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.2.2.4.1.3

gnAgnLogFileTime mandatory

This field is the hour the alarm occurred - format HH:MM.
HH - Hour, MM - minute

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.2.2.4.1.4

gnAgnLogFileSeverity mandatory

This value indicates the severity of the alarm,
31 for CRITICAL, 15 for MAJOR, 7 for MINOR, 3 for WARNING and 1 for EVENT.

Enumeration

Enumerated Values:

1	event
3	warning
7	minor
15	major
31	critical

.1.3.6.1.4.1.2281.2.2.2.4.1.5

gnAgnLogFileText mandatory

This field describes the alarm that occurred. Max length 40
characters.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.2.2.4.1.6

gnAgnLogFileDeviceCelsiusTemp mandatory

This is the temperature of the IDU in degrees Celsius,
during the alarm acceptance.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.7

gnAgnLogFileDevicePowerSupply mandatory

This is the Power supply status of the IDU, during the alarm
acceptance
bit 1 on = 3.3V faulty
bit 2 on = -5V faulty
bit 3 on = 5V faulty.
bit 4 on = +8V faulty

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.2.2.4.1.8

gnAgnLogFileInternalCommunication mandatory

This is the internal communication status of the IDU, during the alarm
acceptance
bit 1 = 1: between main CPU and ODU CPU.
bit 2 = 1: between main CPU and MUX CPU.
bit 3 = 1: between master main CPU and slave main CPU.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.2.2.4.1.9

gnAgnLogFileDeviceFanStatus mandatory

This is the Fan status of the IDU, during the alarm acceptance
bit 1 = Fan1 is faulty.
bit 2 = Fan 2 is faulty.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.2.2.4.1.10

gnAgnLogFileDeviceODUStatus mandatory

This is the ODU status during the alarm acceptance
bit 1 MSB
bit 1 = Power Supply status
bit 2 = Synthesizer lock status
bit 3 = Tx level status
bit 4 = ATPC status
bit 5 = Rx level status
bit 6 = Not currently used
bit…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.2.2.2.4.1.11

gnAgnLogFileDeviceIDUStatus mandatory

This is the IDU status during the alarm acceptance
bit 1 MSB
bit 1 = Power status -
bit 2 = Cable open status -
bit 3 = Cable short status -
bit 4 = Modem Lock status
bit 5 = Temperature status
bit 6 = Not current…

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.2281.2.2.2.4.1.12

gnAgnLogFileOduCelsiusTemp mandatory

This is the temperature of the ODU in degrees Celsius,
during the alarm acceptance.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.13

gnAgnLogFileOduReceiveLevel mandatory

This is the received signal level in DBM, during the alarm acceptance

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.14

gnAgnLogFileOduSynthesizerVCOLock mandatory

This is the Synthesizer status, during the alarm acceptance
bit 1 on = TX IF synthesizer fault
bit 2 on = RX IF synthesizer fault
bit 3 on = Xband synthesizer fault
bit 4 on = History TX IF synthesizer fault
bit 5 on = …

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.2.2.4.1.15

gnAgnLogFileOduPowerSupply mandatory

This is the ODU power supply status, during the alarm acceptance
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.2.2.2.4.1.16

gnAgnLogFileLineBERCur mandatory

This is the Line BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.17

gnAgnLogFileRadioBERCur mandatory

This is the Radio BER (Bit Error Rate), during the alarm acceptance.
Included for future development, not currently supported.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.18

gnAgnLogFileModStatus mandatory

This is the Modulator status, during the alarm acceptance
ok(2),
modulatorFault(3)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.19

gnAgnLogFileDemodStatus mandatory

This is the Demodulator status, during the alarm acceptance . This field
is for internal use
internal debugging

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.20

gnAgnLogFileLastDemodDefectBlocks mandatory

This is the number of the Defected blocks (blocks that couldn't be
corrected)
by the FEC, during the alarm acceptance last second.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.21

gnAgnLogFileLastDemodBytesCorrected mandatory

This is the number of the bytes that were corrected by the FEC,
during the alarm acceptance last second.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.22

gnAgnLogFileLastDemodBlocksCorrected mandatory

This is the number of the blocks that were corrected by the FEC
, during the alarm acceptance last second.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.23

gnAgnLogFileUniqueId mandatory

Unique Id for each log from 1 to 2,147,483,647 ( = 0x7FFFFFFF).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.24

gnAgnLogFileSource mandatory

The soure drawer of the alarm.

Enumeration

Enumerated Values:

1	interfaces
2	idc
3	drawer1
4	drawer2
257	tIdc1
258	tIdc2
259	tIdc3
260	tIdc4
261	tIdc5
262	tIdc6
263	tIdc7
264	tIdc8
265	tIdc9
513	tDrawer1
514	tDrawer2
515	tDrawer3
516	tDrawer4
517	tDrawer5
518	tDrawer6
519	tDrawer7
520	tDrawer8
521	tDrawer9
522	tDrawer10
523	tDrawer11
524	tDrawer12
525	tDrawer13
526	tDrawer14
527	tDrawer15
769	tXC1
770	tXC2
771	tXC3
772	tXC4
773	tXC5
774	tXC6

.1.3.6.1.4.1.2281.2.2.2.4.1.25

gnAgnLogFileTimeT mandatory

The time of the alarm represented by the number of seconds from 1.1.1970.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.2.4.1.26

gnAgnInExternAlarmTable

table mandatory

.1.3.6.1.4.1.2281.2.2.3.1 · 1 row entry · 5 columns

Open in standard view

This table is the input external alarm table.

gnAgnInExternAlarmEntry entry .1.3.6.1.4.1.2281.2.2.3.1.1

Entry containing the external alarm inputs.

Indexes

gnAgnInExternAlarmDevId gnAgnInExternAlarmIndex

Column Syntax OID

gnAgnInExternAlarmDevId mandatory

This value indicates device to which the external alarm
is connected - 1 Local, 2 Remote

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.2281.2.2.3.1.1.1

gnAgnInExternAlarmIndex mandatory

This value indicates the index of the input external alarm
1 to 8

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.2281.2.2.3.1.1.2

gnAgnInExternAlarmEnable mandatory

This value indicates if this Input alarm is enabled.

Enumerationr/w

Enumerated Values:

2	disabled
3	enabled

.1.3.6.1.4.1.2281.2.2.3.1.1.3

gnAgnInExternAlarmText mandatory

This field describes the external alarm. Max string 20 characters

OctetStringr/w

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.2.2.3.1.1.4

gnAgnInExternAlarmSeverity mandatory

This value indicates the severity of the external alarm
31 CRITICAL ,15 MAJOR, 7 MINOR, 3 WARNING and 1 EVENT.

Enumerationr/w

Enumerated Values:

1	event
3	warning
7	minor
15	major
31	critical

.1.3.6.1.4.1.2281.2.2.3.1.1.5

gnAgnOutRelayAlarmTable

table mandatory

.1.3.6.1.4.1.2281.2.2.3.2 · 1 row entry · 3 columns

Open in standard view

This table is the output relay alarm table.

gnAgnOutRelayAlarmEntry entry .1.3.6.1.4.1.2281.2.2.3.2.1

Entry containing the output relay alarms.

Indexes

gnAgnOutRelayAlarmDevId gnAgnOutRelayAlarmIndex

Column Syntax OID

gnAgnOutRelayAlarmDevId mandatory

This value indicates device from which the relay is sent
from - 1 Local, 2 Remote

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.2281.2.2.3.2.1.1

gnAgnOutRelayAlarmIndex mandatory

This value indicates the index of the Output Relay alarm
1 to 5

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.2281.2.2.3.2.1.2

gnAgnOutRelayAlarmType mandatory

This value indicates the alarm/led that causes
the relay to change its state

Enumerationr/w

Enumerated Values:

2	major
3	minor
4	warning
5	external
6	power
7	ber
8	line
9	loopback
10	lof
11	idu
12	odu
13	cable
14	remote
15	critical
16	testOn
17	off
18	xc

.1.3.6.1.4.1.2281.2.2.3.2.1.3

gnAgnInternalDownloadTable

table mandatory

.1.3.6.1.4.1.2281.2.2.5 · 1 row entry · 8 columns

Open in standard view

This table controls the Internal Download process
from manager to MUX and ODU (local and remote).

gnAgnInternalDownloadEntry entry .1.3.6.1.4.1.2281.2.2.5.1

Entry containing the internal download process controls, for local and
remote.

Indexes

gnAgnInternalDownloadId

Column Syntax OID

gnAgnInternalDownloadId mandatory

This value indicates an index of a specific Internal Download
operation.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.5.1.1

gnAgnInternalDownloadOperation mandatory

The Operation Description

Enumeration

Enumerated Values:

2	localMUX
3	localODU
4	remoteMUX
5	remoteODU
6	leftShelfODU
7	rightShelfODU

.1.3.6.1.4.1.2281.2.2.5.1.2

gnAgnInternalDownloadAction mandatory

This parameter controls the download action operation.

Enumerationr/w

Enumerated Values:

2	start
3	cancel
4	clear
5	noAction
6	upLoadFpga

.1.3.6.1.4.1.2281.2.2.5.1.3

gnAgnInternalDownloadStatus mandatory

Internal download session status

Enumeration

Enumerated Values:

1	gnInternalDownloadSessionError
2	gnInternalDownloadSessionClearing
3	gnInternalDownloadSessionSendBlock
4	gnInternalDownloadSessiontimeout
5	gnInternalDownloadSessionDone
6	gnInternalDownloadSessionWaitForRetransmit
255	gnNoInternalDownloadSession

.1.3.6.1.4.1.2281.2.2.5.1.4

gnAgnInternalDownloadBlockCount mandatory

The total number of blocks sent in the current session.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.5.1.5

gnAgnInternalDownloadVersionControl mandatory

Points to the software version to be uploaded

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.2281.2.2.5.1.6

gnAgnInternalDownloadFileSizeInBytes mandatory

The total number of blocks in the current file

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.5.1.7

gnAgnInternalDownloadBytesCount mandatory

The number of bytes sent in the current session

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.5.1.8

gnAgnInterLinkTable

table mandatory

.1.3.6.1.4.1.2281.2.2.6 · 1 row entry · 8 columns

Open in standard view

This table controls the Inter Link Download process
between local and remote masters and between master and slave (local or
remote).
      Each session transfers MUX, ODU or manager (IDC) software.

gnAgnInterLinkEntry entry .1.3.6.1.4.1.2281.2.2.6.1

Entry containing the process controls for the interlink download
process, for local and remote.

Indexes

gnAgnInterLinkId

Column Syntax OID

gnAgnInterLinkId mandatory

This value indicates the index of a specific InterLink
operation.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.6.1.1

gnAgnInterLinkSide mandatory

The Link Side

Enumeration

Enumerated Values:

2	local
3	remote

.1.3.6.1.4.1.2281.2.2.6.1.2

gnAgnInterLinkSource mandatory

The source distribution center.

Enumerationr/w

Enumerated Values:

2	me
3	mate

.1.3.6.1.4.1.2281.2.2.6.1.3

gnAgnInterLinkDestination mandatory

The destination distribution center.
The destination may be selected as the local IDU being contacted (me),
the collocated local IDU, in a protected configuration (mate) or
it may be selected to be the remote IDU.

Enumerationr/w

Enumerated Values:

2	me
3	mate
4	remote

.1.3.6.1.4.1.2281.2.2.6.1.4

gnAgnInterLinkSoftware mandatory

The software type to be transferred. MUX, ODU or IDU (referred to as
manager).

Enumerationr/w

Enumerated Values:

2	manager
3	mux
4	odu

.1.3.6.1.4.1.2281.2.2.6.1.5

gnAgnInterLinkAction mandatory

This parameter controls the interlink action operation.

Enumerationr/w

Enumerated Values:

2	start
3	cancel
4	noAction

.1.3.6.1.4.1.2281.2.2.6.1.6

gnAgnInterLinkStatus mandatory

Inter-link session status

Enumeration

Enumerated Values:

1	gnInterLinkSessionError
2	gnInterLinkSessionClearing
3	gnInterLinkSessionSendBlock
4	gnInterLinkSessiontimeout
5	gnInterLinkSessionDone
255	gnNoInterLinkSession

.1.3.6.1.4.1.2281.2.2.6.1.7

gnAgnInterLinkBlockCount mandatory

The total number of blocks sent in the current session.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.6.1.8

gnSoftwareVersionTable

table mandatory

.1.3.6.1.4.1.2281.2.2.7 · 1 row entry · 18 columns

Open in standard view

This table contains the IDU, MUX, ODU & WS software versions;
local and remote.

gnSoftwareVersionEntry entry .1.3.6.1.4.1.2281.2.2.7.1

Entry containing the currently operating IDU, ODU and MUX software
versions.

Indexes

gnSoftwareVersionId

Column Syntax OID

gnSoftwareVersionId mandatory

The ID indicates which device is involved
in the specific row. The software table includes two rows,
one for the local radio and one for the remote radio.

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.2281.2.2.7.1.1

gnSoftwareVersionIDU mandatory

This is the IDU software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.2

gnSoftwareVersionMUX mandatory

This is the MUX software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.3

gnSoftwareVersionODU mandatory

This is the ODU software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.4

gnSoftwareVersionIDUPostResetVersion mandatory

This is the IDU post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.5

gnSoftwareVersionMUXPostResetVersion mandatory

This is the MUX post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.6

gnSoftwareVersionODUPostResetVersion mandatory

This is the ODU post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.7

gnSoftwareVersionMuxAlteraVer mandatory

This string contains the MUX altera versions

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.8

gnSoftwareIDCVersionControl mandatory

Points to the software version that will run on the next reset

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.2281.2.2.7.1.9

gnSoftwareVersionWSAlteraVer mandatory

This is the WS software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.10

gnSoftwareVersionWSPostResetVersion mandatory

This is the WS post reset software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.11

gnSoftwareVersionMrmcVer mandatory

This is the MRMC filter table software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.12

gnSoftwareVersionMrmcPostResetVer mandatory

This is the MRMC filter table post reset software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.13

gnSoftwareVersionBootSoftVer mandatory

This is the BOOT software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.14

gnSoftwareVersionBootFlashVer mandatory

This is the BOOT FLASH version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.15

gnSoftwareVersionAcmLutVer mandatory

This is the ACM LUT software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.16

gnSoftwareVersionAcmLutVerPostResetVer mandatory

This is the ACM LUT post reset software version

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.7.1.17

gnSoftwareVersionSfdVer mandatory

This is the SFD software version

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.2281.2.2.7.1.18

gnAgnInBandMngXChannelTable

table mandatory

.1.3.6.1.4.1.2281.2.2.9.17 · 1 row entry · 6 columns

Open in standard view

This table defines the inband channels mapping.

gnAgnInBandMngXChannelEntry entry .1.3.6.1.4.1.2281.2.2.9.17.1

This is an entry in the inband channel table.
This table contains a row for every channel (1..4).
First 3 physical channels are available in the 8 possible mapping options (on both carrier drawers).
An additional channe…

Indexes

gnAgnInBandMngXChannelId

Column Syntax OID

gnAgnInBandMngXChannelId mandatory

The channel Id

Enumeration

Enumerated Values:

1	channel1
2	channel2
3	channel3
4	channel4

.1.3.6.1.4.1.2281.2.2.9.17.1.1

gnAgnInBandMngXChannelIfIndex mandatory

The ifIndex of the interface that is mapped to this channel

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.9.17.1.2

gnAgnInBandMngXChannelType mandatory

The type of channel the in-band-management goes over.
Default value for channels 1 and 3 in the carrier drawers is Proprietary.
Channel 2 not allowed to be Proprietary.
In protection the ch_type of ch#3 can not …

Enumerationr/w

Enumerated Values:

2	proprietary
3	dccr
4	dccm
5	mediaspecific
6	pppoe

.1.3.6.1.4.1.2281.2.2.9.17.1.3

gnAgnInBandMngXChannelState mandatory

Enable/Disable the in band channel

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.2.2.9.17.1.4

gnAgnInBandMngXChannelNeighborIP mandatory

The PPP IP address of the gateway network element.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.2.9.17.1.5

gnAgnInBandMngXChannelStatus mandatory

This MIB parameter defines the In-band PPP connection status.
If the MIB value is up the PPP connection is up and running
If the MIB value is down the PPP connection is down and is in initialization state.
(Trying t…

Enumeration

Enumerated Values:

2	up
3	down
4	closed

.1.3.6.1.4.1.2281.2.2.9.17.1.6

gnNeighborInBandTable

table mandatory

.1.3.6.1.4.1.2281.2.2.10.1 · 1 row entry · 2 columns

Open in standard view

This table defines the IP addresses of the units that are connected Inband.

gnNeighborInBandEntry entry .1.3.6.1.4.1.2281.2.2.10.1.1

This is an entry in the IP addresses of the units that are connected Inband.
This table contains a row for every interface which type is logically connected.
for example regenerator which is connected in band has two ne…

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnNeighborInBandIP mandatory

The PPP IP address of the gateway network element.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.2.10.1.1.1

gnNeighborInBandStatus mandatory

Enumeration

Enumerated Values:

2	up
3	down
4	closed

.1.3.6.1.4.1.2281.2.2.10.1.1.2

gnNeighborInBandXTable

table mandatory

.1.3.6.1.4.1.2281.2.2.10.4 · 1 row entry · 2 columns

Open in standard view

This table defines the IP addresses of the units that are connected Inband.

gnNeighborInBandXEntry entry .1.3.6.1.4.1.2281.2.2.10.4.1

Indexes

gnNeighborInBandXId

Column Syntax OID

gnNeighborInBandXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.2.10.4.1.1

gnNeighborInBandXIP mandatory

The PPP IP address of the gateway network element.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.2.10.4.1.2

gnNeighborIpTable

table mandatory

.1.3.6.1.4.1.2281.2.2.10.5 · 1 row entry · 4 columns

Open in standard view

This table shows the Neighbor IP for each STM connection.

gnNeighborIpEntry entry .1.3.6.1.4.1.2281.2.2.10.5.1

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnNeighborIpDetectMode mandatory

The Neighbor detect can be done automatically or to be manually insreted.
Disable marks that the IP Detect is not used.

Enumerationr/w

Enumerated Values:

2	disable
3	manual
4	auto

.1.3.6.1.4.1.2281.2.2.10.5.1.1

gnNeighborIpAddress mandatory

The neighbor IP address.

RFC1155-SMIIpAddressr/w

Textual Convention: RFC1155-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2281.2.2.10.5.1.2

gnNeighborIpRemoteIfIndex mandatory

The If index of the neighbor IP address connected to the current If Index.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.10.5.1.3

gnNeighborIpRemoteType mandatory

The Type of the neighbor.

Enumerationr/w

Enumerated Values:

1	regenerator
2	access
3	adm
4	unit1500p
5	admline2line

.1.3.6.1.4.1.2281.2.2.10.5.1.4

gnSoftwareDrawerVersionTable

table mandatory

.1.3.6.1.4.1.2281.2.2.13 · 1 row entry · 10 columns

Open in standard view

This table contains the IDU, MUX & ODU software versions;
local and remote.

gnSoftwareDrawerVersionEntry entry .1.3.6.1.4.1.2281.2.2.13.1

Entry containing the currently operating IDU, ODU and MUX software
versions.

Indexes

gnSoftwareDrawerId

Column Syntax OID

gnSoftwareDrawerId mandatory

The ID indicates which Drawer is involved
in the specific row.

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.2.2.13.1.1

gnSoftwareDrawerVersionMUX mandatory

This is the MUX software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.2

gnSoftwareDrawerVersionMUXPostResetVersion mandatory

This is the ODU software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.3

gnSoftwareDrawerVersionODU mandatory

This is the MUX post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.4

gnSoftwareDrawerVersionODUPostResetVersion mandatory

This is the MUX post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.5

gnSoftwareDrawerVersionModemFile mandatory

This is the Modem software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.6

gnSoftwareDrawerVersionModemFilePostResetVersion mandatory

This is the Modem post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.7

gnSoftwareDrawerVersionModemScript mandatory

This is the Modem software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.8

gnSoftwareDrawerVersionModemScriptPostResetVersion mandatory

This is the Modem post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.9

gnSoftwareDrawerVersionRfuFpgaVersion mandatory

This is the Rfu Fpga software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.13.1.10

gnAgnCurrentAlarmTable

table mandatory

.1.3.6.1.4.1.2281.2.2.14.2 · 1 row entry · 9 columns

Open in standard view

This table includes the currently open alarm (when a RAISED trap is
sent, an alarm is added to the table, when a CLEAR trap is sent,
the alarm is removed.

gnAgnCurrentAlarmEntry entry .1.3.6.1.4.1.2281.2.2.14.2.1

Entry containing the info of a currently RAISED trap.

Indexes

gnAgnCurrentAlarmCounter

Column Syntax OID

gnAgnCurrentAlarmCounter mandatory

A running counter of open alarm, the counter is incremented on every new RAISED trap.
It is cleared after reset. This counter is (optionaly) attached to each trap.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.14.2.1.1

gnAgnCurrentAlarmSeverity mandatory

The current Alarm severity

Enumeration

Enumerated Values:

1	event
3	warning
7	minor
15	major
31	critical

.1.3.6.1.4.1.2281.2.2.14.2.1.2

gnAgnCurrentAlarmId mandatory

Alarm Identifier (contains alarm type and interface). Same AlarmId for rasie and clear alarms.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.14.2.1.3

gnAgnCurrentAlarmIfIndex mandatory

Interface Index where the alarm occurred, alarms that are
not associated with specific interface will have the following value:
For IDC related alarms the value is: 65001
For drawer1 related alarms th…

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.14.2.1.4

gnAgnCurrentAlarmOrigin mandatory

The origin drawer of the alarm (if applicable, otherwise it will be idc(2)).

Enumeration

Enumerated Values:

1	interfaces
2	idc
3	drawer1
4	drawer2
5	unKnown
257	tIdc1
258	tIdc2
259	tIdc3
260	tIdc4
261	tIdc5
262	tIdc6
263	tIdc7
264	tIdc8
265	tIdc9
513	tDrawer1
514	tDrawer2
515	tDrawer3
516	tDrawer4
517	tDrawer5
518	tDrawer6
519	tDrawer7
520	tDrawer8
521	tDrawer9
522	tDrawer10
523	tDrawer11
524	tDrawer12
525	tDrawer13
526	tDrawer14
527	tDrawer15
769	tXC1
770	tXC2
771	tXC3
772	tXC4
773	tXC5
774	tXC6

.1.3.6.1.4.1.2281.2.2.14.2.1.5

gnAgnCurrentAlarmUnit mandatory

The unit of the alarm.

Enumeration

Enumerated Values:

2	idc
3	odu
4	mux
5	modem
6	drawer
7	unKnown
9	xc

.1.3.6.1.4.1.2281.2.2.14.2.1.6

gnAgnCurrentAlarmTrapID mandatory

The ID of the RAISED trap that was sent when this alarm was raised.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.14.2.1.7

gnAgnCurrentAlarmTimeT mandatory

Timestamp of this alarm, this number is the seconds from midnight 1.1.1970.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.14.2.1.8

gnAgnCurrentAlarmText mandatory

The alarm display text (same as the text in the sent trap).

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.2.2.14.2.1.9

gnApplicFileTable

table mandatory

.1.3.6.1.4.1.2281.2.2.16 · 1 row entry · 13 columns

Open in standard view

This table contains the application file list.

gnApplicFileEntry entry .1.3.6.1.4.1.2281.2.2.16.1

Entry containing the application file list.

Indexes

gnApplicFileId

Column Syntax OID

gnApplicFileId mandatory

The ID indicates which device is involved
in the specific row. The application file table includes two rows,
one for the local radio and one for the remote radio.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.16.1.1

gnApplicFileName mandatory

This is the application file name.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2281.2.2.16.1.2

gnApplicFileVersion mandatory

This is the application file version.

OctetString

Constraints:
range: 0-40

.1.3.6.1.4.1.2281.2.2.16.1.3

gnApplicFileCreateDate mandatory

This parameter specifies the application file download date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.

field octets contents range
----- ------ -----…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.2281.2.2.16.1.4

gnApplicFileDownloadDate mandatory

This parameter specifies the application file download date
Format 'YYYY-MM-DD,HH:MM:SS' (Hexadecimal).
A date-time specification.

field octets contents range
----- ------ -----…

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.2281.2.2.16.1.5

gnApplicFileType mandatory

This is the application file type.

Enumeration

Enumerated Values:

1	idc
2	mux
3	odu
4	modem
5	boot
6	modemConfig
7	wayside
8	bootRom
9	rfuFpga
10	rfuConfig
11	mrmcTable
12	xc
13	xcErrorgen
14	aAux
15	license
16	frameConfigTable

.1.3.6.1.4.1.2281.2.2.16.1.6

gnApplicFileSubType mandatory

This is the application file sub type.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.2.2.16.1.7

gnApplicFileFirmware mandatory

This is the application file firmware.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.16.1.8

gnApplicFileGeneralPurpose mandatory

This is the application file General Purpose.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.16.1.9

gnApplicFileSize mandatory

This is the application file size in bytes.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.2.2.16.1.10

gnApplicFileCompressed mandatory

This is indicate the application file compress status.

Enumeration

Enumerated Values:

2	yes
3	no

.1.3.6.1.4.1.2281.2.2.16.1.11

gnApplicFileDssSupport mandatory

This is indicate the application file DSS support.

Enumeration

Enumerated Values:

2	yes
3	no

.1.3.6.1.4.1.2281.2.2.16.1.12

gnApplicFileCrcSupport mandatory

This is indicate the application file CRC support.

Enumeration

Enumerated Values:

2	yes
3	no

.1.3.6.1.4.1.2281.2.2.16.1.13

gnOduCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.1.1 · 1 row entry · 22 columns

Open in standard view

This table defines the configuration of the Outdoor part
of the system.

gnOduCfgEntry entry .1.3.6.1.4.1.2281.3.1.1.1

This is an entry in the ODU Configuration Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnOduCfgTransmitterFrequency mandatory

This parameter indicates the radio TX channel number.
WRITE will change the LOCAL side only.
Not all radios will support TX frequency change via channel numbers.

Integer32r/w

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.3.1.1.1.1

gnOduCfgRLPerfMonThresh1 mandatory

When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments.

Integer32r/w

Constraints:
range: -75--15

.1.3.6.1.4.1.2281.3.1.1.1.2

gnOduCfgRLPerfMonThresh2 mandatory

When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments.

Integer32r/w

Constraints:
range: -75--15

.1.3.6.1.4.1.2281.3.1.1.1.3

gnOduCfgATPCStatus mandatory

This parameter indicates if the ATPC option is enabled or disabled.

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.1.1.4

gnOduCfgMUTEStatus mandatory

This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit)

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.1.1.5

gnOduCfgAntennaType mandatory

This parameter indicates the size of the antenna used
in the ODU. This attribute will not auto-detect the antenna size.
It is used for the unfaded RSL calculation feature included in
the element manager.

Enumerationr/w

Enumerated Values:

2	oneFoot
3	twoFeet
4	threeFeet
5	fourFeet
6	sixFeet

.1.3.6.1.4.1.2281.3.1.1.1.6

gnOduCfgTransmitLevel mandatory

This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM.

Integer32r/w

Constraints:
range: -50-30

.1.3.6.1.4.1.2281.3.1.1.1.7

gnOduCfgRealTxFreqNumber mandatory

Identifies the RF Tx frequency. For 6, 7 and 8 bands the Tx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Tx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.1.1.8

gnOduCfgRealRxFreqNumber mandatory

Identifies the RF Rx frequency. For 6, 7 and 8 bands the Rx frequency
resolution is in kHz, for other bands the resolution is in 10kHz.
If the Rx frequency value is over 4000000 than the band is identified
as 6, 7 or 8G…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.1.1.9

gnOduCfgMinTxFreqNumber mandatory

This the Minimum TX frequency that the ODU can receive - Used by the
management station.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.1.1.1.10

gnOduCfgMaxTxFreqNumber mandatory

This the Maximum TX frequency that the ODU can receive - Used by the
management station.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.1.1.1.11

gnOduCfgMaxTxLevel mandatory

This is the theoretical maximum level that this ODU unit
can transmit.

Integer32

Constraints:
range: 0-99

.1.3.6.1.4.1.2281.3.1.1.1.12

gnOduCfgRefRsl mandatory

This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm.

Integer32r/w

Constraints:
range: -70--30

.1.3.6.1.4.1.2281.3.1.1.1.13

gnOduCfgForceRmtMuteTx mandatory

When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit)

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.1.1.14

gnOduCfgForceRmtMaxTx mandatory

This parameter force the transmitter output power level of the signal
transmitted by the radio.

Integer32r/w

Constraints:
range: -50-30

.1.3.6.1.4.1.2281.3.1.1.1.15

gnOduCfgTLPerfMonThresh1 mandatory

When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments.

Integer32r/w

Constraints:
range: -10-25

.1.3.6.1.4.1.2281.3.1.1.1.16

gnOduCfgMinRxFreqNumber mandatory

This the Minimum RX frequency that the ODU can receive - Used by the
management station.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.1.1.17

gnOduCfgMaxRxFreqNumber mandatory

This the Maximum RX frequency that the ODU can receive - Used by the
management station.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.1.1.18

gnOduCfgOduLoopSupport mandatory

Indication for loopback support by the connected ODU.

Enumeration

Enumerated Values:

2	notSupported
3	supported

.1.3.6.1.4.1.2281.3.1.1.1.19

gnOduCfgOduModel mandatory

Enumeration

Enumerated Values:

2	unknown
3	v2
4	v1

.1.3.6.1.4.1.2281.3.1.1.1.20

gnOduCfgFreqPlanStandard mandatory

For the NMS use.

OctetStringr/w

Constraints:
range: 0-45

.1.3.6.1.4.1.2281.3.1.1.1.21

gnOduCfgFreqDevider mandatory

Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.1.1.22

gnOduStatusTable

table mandatory

.1.3.6.1.4.1.2281.3.1.2 · 1 row entry · 7 columns

Open in standard view

This table defines the status of the Outdoor unit
of the system.

gnOduStatusEntry entry .1.3.6.1.4.1.2281.3.1.2.1

This is an entry in the ODU Status Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnOduStatusCelsiusTemp mandatory This is the temperature of the ODU in degrees Celsius.	Integer32 Constraints: `range: -50-80`	`.1.3.6.1.4.1.2281.3.1.2.1.1`
gnOduStatusFahrenheitTemp mandatory This is the temperature of the ODU in degrees Fahrenheit.	Integer32 Constraints: `range: -58-176`	`.1.3.6.1.4.1.2281.3.1.2.1.2`
gnOduStatusTransmitLevel mandatory This is the transmit level of the signal transmitted by the radios transmitter, displayed in DBM.	Integer32 Constraints: `range: -99-30`	`.1.3.6.1.4.1.2281.3.1.2.1.3`
gnOduStatusReceiveLevel mandatory This is the receive level of the signal transmitted by the radios transmitter, displayed in DBM.	Integer32 Constraints: `range: -99--15`	`.1.3.6.1.4.1.2281.3.1.2.1.4`
gnOduStatusSynthesizerVCOLock mandatory This octet represents the ODU status as follows (bit 1, LSB): bit 1 on = TX IF synthesizer bit 2 on = RX IF synthesizer bit 3 on = Xband synthesizer bit 4 on = History TX IF synthesizer bit 5 on = History RX IF synthesi…	OctetString Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.1.2.1.5`
gnOduStatusPowerSupply mandatory This octet represents the status of the power supplies of the ODU: bit 1 on = +5V faulty bit 2 on = +8V faulty bit 3 on = +12V faulty bit 4 on = -12V faulty.	OctetString Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.1.2.1.6`
gnOduStatusClearLoopTimer mandatory This variable indicates the remaining time (in minutes) till the relevant odu loopback timer will be expired. when starting a loopback and the value of gnGenCfgClearLoopTimeout is x, the gnOduStatusClearLoopTimer will b…	Integer32 Constraints: `range: 0-1440`	`.1.3.6.1.4.1.2281.3.1.2.1.7`

gnOduMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.1.3.1 · 1 row entry · 14 columns

Open in standard view

This table defines/keeps the counters of the current 15 min interval.

gnOduMonCurrEntry entry .1.3.6.1.4.1.2281.3.1.3.1.1

This is an entry in the Current Interval Table. This table
contains two rows, indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnOduMonCurrMinRL mandatory The minimum received signal level (RL) in the current 15 minute interval. (in DBM)	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.1`
gnOduMonCurrMaxRL mandatory The maximum received signal level (RL) in the current 15 minute interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.2`
gnOduMonCurrTLThresh1Exceed mandatory The number of seconds TL exceeded the TL1 threshold in the last 15 minutes.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.3`
gnOduMonCurrRLThresh1Exceed mandatory The number of seconds RL exceeded the RL1 threshold in the last 15 minutes.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.4`
gnOduMonCurrRLThresh2Exceed mandatory The number of seconds RL exceeded the RL2 threshold in the last 15 minutes.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.5`
gnOduMonCurrDayMinRL mandatory The minimum Receive Level (in DBM). in the last 24 hours.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.6`
gnOduMonCurrDayMaxRL mandatory The maximum Receive Level (in DBM). in the last 24 hours.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.7`
gnOduMonCurrDayTLThresh1Exceed mandatory The number of seconds TL exceeded the TL1 threshold in the last 24 hours.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.8`
gnOduMonCurrDayRLThresh1Exceed mandatory The number of seconds RL exceeded the RL1 threshold in the last 24 hours.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.9`
gnOduMonCurrDayRLThresh2Exceed mandatory The number of seconds RL exceeded the RL2 threshold in the last 24 hours.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.1.1.10`
gnOduMonCurrMinTL mandatory The minimum transmitted signal level (TL) in the current 15 minute interval. (in DBM)	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.11`
gnOduMonCurrMaxTL mandatory The maximum transmitted signal level (TL) in the current 15 minute interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.12`
gnOduMonCurrDayMinTL mandatory The minimum Transmitted Level (in DBM). in the last 24 hours.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.13`
gnOduMonCurrDayMaxTL mandatory The maximum Transmitted Level (in DBM). in the last 24 hours.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.1.1.14`

gnOduMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.1.3.2 · 1 row entry · 9 columns

Open in standard view

This table defines/keeps the counters of the 96 last intervals of 15 min.

gnOduMonIntervalEntry entry .1.3.6.1.4.1.2281.3.1.3.2.1

This is an entry in the Interval Table. This table
is indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU and by interval idx

Indexes

RFC1213-MIBifIndex gnOduMonIntervalIdx

Column	Syntax	OID
gnOduMonIntervalIdx mandatory The interval number to which this row is related.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.1.3.2.1.1`
gnOduMonIntervalMinRL mandatory The minimum RL in a 15 minutes interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.2.1.2`
gnOduMonIntervalMaxRL mandatory The maximum RL in a 15 minutes interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.2.1.3`
gnOduMonIntervalTLThresh1Exceed mandatory The number of seconds TL exceeded the TL1 threshold in a 15 minutes interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.2.1.4`
gnOduMonIntervalEvent mandatory Events bit 1 = CommDisc. bit 2 = CommCon bit 3 = ATPC2Max. bit 4 = ATPC2Norm. Included for future development, not currently supported.	OctetString Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.1.3.2.1.5`
gnOduMonIntervalRLThresh1Exceed mandatory The number of seconds RL exceeded the RL1 threshold in a 15 minutes interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.2.1.6`
gnOduMonIntervalRLThresh2Exceed mandatory The number of seconds RL exceeded the RL2 threshold in a 15 minutes interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.2.1.7`
gnOduMonIntervalMinTL mandatory The minimum TL in a 15 minutes interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.2.1.8`
gnOduMonIntervalMaxTL mandatory The maximum TL in a 15 minutes interval. (in DBM).	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.2.1.9`

gnOduMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.1.3.3 · 1 row entry · 8 columns

Open in standard view

This table defines/keeps the counters of 96 intervals of 15 min.

gnOduMonDayEntry entry .1.3.6.1.4.1.2281.3.1.3.3.1

This is an entry in the Days Table. This table
is indexed by ifIndex= 1 for local ODU and
ifIndex = 101 for remote ODU and by day idx.
gnOduMonDayIdx = 1 is one day from now,
gnOduMonDayIdx = 2 is two days from now, and…

Indexes

RFC1213-MIBifIndex gnOduMonDayIdx

Column	Syntax	OID
gnOduMonDayIdx mandatory The interval number to which this row is related.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.1.3.3.1.1`
gnOduMonDayMinRL mandatory The minimum Receive Level (in DBM). in a 24 hour interval.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.3.1.2`
gnOduMonDayMaxRL mandatory The maximum Receive Level (in DBM). in a 24 hour interval.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.3.1.3`
gnOduMonDayTLThresh1Exceed mandatory The number of seconds TL exceeded the TL1 threshold in a 24 hour interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.3.1.4`
gnOduMonDayRLThresh1Exceed mandatory The number of seconds RL exceeded the RL1 threshold in a 24 hour interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.3.1.5`
gnOduMonDayRLThresh2Exceed mandatory The number of seconds RL exceeded the RL2 threshold in a 24 hour interval.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.1.3.3.1.6`
gnOduMonDayMinTL mandatory The minimum Transmit Level (in DBM). in a 24 hour interval.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.3.1.7`
gnOduMonDayMaxTL mandatory The maximum Transmit Level (in DBM). in a 24 hour interval.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2281.3.1.3.3.1.8`

gnOduCfgXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.4 · 1 row entry · 38 columns

Open in standard view

This table defines the configuration of the Outdoor part
of the system.

gnOduCfgXEntry entry .1.3.6.1.4.1.2281.3.1.4.1

This is an entry in the ODU Configuration Table. This table
contains two rows, indexed by gnOduCfgXId= 3 for drawer1 ODU and
gnOduCfgXId = 4 for drawer2 ODU.

Indexes

gnOduCfgXId

Column Syntax OID

gnOduCfgXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.4.1.1

gnOduCfgXTxFreqNumLocalRemote mandatory

Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.2

gnOduCfgXRLPerfMonThresh1 mandatory

When the Received Level (RL) exceeds this threshold a
performance monitoring RL1 counter increments.

Integer32r/w

Constraints:
range: -75--15

.1.3.6.1.4.1.2281.3.1.4.1.3

gnOduCfgXRLPerfMonThresh2 mandatory

When the Received Level (RL) exceeds this threshold a
performance monitoring RL2 counter increments.

Integer32r/w

Constraints:
range: -75--15

.1.3.6.1.4.1.2281.3.1.4.1.4

gnOduCfgXATPCStatus mandatory

This parameter indicates if the ATPC option is enabled or disabled.

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.4.1.5

gnOduCfgXMUTEStatus mandatory

This parameter indicates if transmitter will be in mute state.
(Mute on -> don't transmit)

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.4.1.6

gnOduCfgXAntennaType mandatory

Enumerationr/w

Enumerated Values:

2	oneFoot
3	twoFeet
4	threeFeet
5	fourFeet
6	sixFeet

.1.3.6.1.4.1.2281.3.1.4.1.7

gnOduCfgXTransmitLevel mandatory

This is the transmitter output power level of the signal
transmitted by the radios, displayed in DBM.

Integer32r/w

Constraints:
range: -50-34

.1.3.6.1.4.1.2281.3.1.4.1.8

gnOduCfgXRealTxFreqNumber mandatory

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.9

gnOduCfgXRealRxFreqNumber mandatory

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.10

gnOduCfgXMinTxFreqNumber mandatory

This the Minimum TX frequency that the ODU can receive - Used by the
management station.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.1.4.1.11

gnOduCfgXMaxTxFreqNumber mandatory

This the Maximum TX frequency that the ODU can receive - Used by the
management station.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.1.4.1.12

gnOduCfgXMaxTxLevel mandatory

This is the theoretical maximum level that this ODU unit
can transmit.

Integer32

Constraints:
range: 0-99

.1.3.6.1.4.1.2281.3.1.4.1.13

gnOduCfgXRefRsl mandatory

This is the received level reference, applicable when utilizing ATPC mode;
displayed in dBm.

Integer32r/w

Constraints:
range: -70--30

.1.3.6.1.4.1.2281.3.1.4.1.14

gnOduCfgXForceRmtMuteTx mandatory

When on, this parameter force the transmitter to be in mute state.
(Mute on -> don't transmit)

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.1.4.1.15

gnOduCfgXForceRmtMaxTx mandatory

This parameter force the transmitter output power level of the signal
transmitted by the radio.

Integer32r/w

Constraints:
range: -50-30

.1.3.6.1.4.1.2281.3.1.4.1.16

gnOduCfgXTLPerfMonThresh1 mandatory

When the Transmitted Level (TL) exceeds this threshold a
performance monitoring TL1 counter increments.

Integer32r/w

Constraints:
range: -10-25

.1.3.6.1.4.1.2281.3.1.4.1.17

gnOduCfgXOperation mandatory

This parameter allows to perform ODU operations.
(3) will SET all ODU default configurations.
(4) will implement ODU reset.

Enumerationr/w

Enumerated Values:

2	noOperation
3	setOduDefaultConf
4	resetODU
5	swResetODU

.1.3.6.1.4.1.2281.3.1.4.1.18

gnOduCfgXODUSerialNumber mandatory

This is the ODU serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.3.1.4.1.19

gnOduCfgXChannelBandwidth mandatory

The TX channel bandwidth, displayed in 1/100 MHz.
For example:
An STM-1 ETSI TX channel bandwidth of 56MHz is displayed as the value 5600.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.20

gnOduCfgXMinRxFreqNumber mandatory

This the Minimum RX frequency that the ODU can receive - Used by the
management station.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.21

gnOduCfgXMaxRxFreqNumber mandatory

This the Maximum RX frequency that the ODU can receive - Used by the
management station.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.22

gnOduCfgXRxFreqNumLocalRemote mandatory

Indicates the radio transmit frequency, displayed in
1/100 MHz. WRITE changes the local and remote sides. Only for systems that
support frequency configuration (Not channel).

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.23

gnOduCfgXOduLoopSupport mandatory

Inidcation for loopback support by the connected ODU.

Enumeration

Enumerated Values:

2	notSupported
3	supported

.1.3.6.1.4.1.2281.3.1.4.1.24

gnOduCfgXOduModel mandatory

Enumeration

Enumerated Values:

2	unknown
3	v2
4	v1
5	v3
6	v4
7	v5
8	v6
9	v7
10	v8
11	v9

.1.3.6.1.4.1.2281.3.1.4.1.25

gnOduCfgXFreqPlanStandard mandatory

For the NMS use.

RFC1213-MIBDisplayStringr/w

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.2281.3.1.4.1.26

gnOduCfgXFreqDevider mandatory

Indicates the number with which we should divide the MIB Freq value to get to the actual Freq (100 or 1000)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.4.1.27

gnOduCfgXLoopbackOption mandatory

This parameter enable the user to activate an ODU loopback .

Enumerationr/w

Enumerated Values:

2	noloopback
3	interfaceInterLoop

.1.3.6.1.4.1.2281.3.1.4.1.28

gnOduCfgXxpicClockMode mandatory

This is the status of the xpic clock mode.

Enumeration

Enumerated Values:

2	standAlone
3	masterClock
4	slaveClock

.1.3.6.1.4.1.2281.3.1.4.1.29

gnOduCfgXUnfadedReferenceRsl mandatory

This is used for the unfaded RSL calculation feature included in
the element manager.

Integer32r/w

Constraints:
range: -70--15

.1.3.6.1.4.1.2281.3.1.4.1.30

gnOduCfgXRfuMode mandatory

The RX mode of operation.

Enumerationr/w

Enumerated Values:

2	main
3	diversity
4	combined

.1.3.6.1.4.1.2281.3.1.4.1.31

gnOduCfgXRslRouteToConnector mandatory

Choose the receive level signal for the RSL connector.

Enumerationr/w

Enumerated Values:

2	main
3	diversity

.1.3.6.1.4.1.2281.3.1.4.1.32

gnOduCfgXDelayCalibrationOperation mandatory

This parameter enables launching a delay calibration parameters calculation.

Enumerationr/w

Enumerated Values:

2	noAction
3	activate
4	error

.1.3.6.1.4.1.2281.3.1.4.1.33

gnOduCfgXDelayCalibrationValue mandatory

This parameter indicates the delay calibration result and delay calibration override value.
values are between -130 to 130.

Integer32r/w

Constraints:
range: -130-130

.1.3.6.1.4.1.2281.3.1.4.1.34

gnOduCfgXDelayCalibrationWgType mandatory

Delay Calibration WG Type For the NMS use.

OctetStringr/w

Constraints:
range: 0-45

.1.3.6.1.4.1.2281.3.1.4.1.35

gnOduCfgXOduLog mandatory

This parameter enable the user to activate ODU log.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.1.4.1.36

gnOduCfgXOduLogPeriod mandatory

This parameter enable the user to chose the log peroid (in sec).

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.2281.3.1.4.1.37

gnOduCfgXXpiPerfMonThresh mandatory

When the Received XPI beneath this threshold a
performance monitoring XPI counter increments (future develope).

Integer32r/w

Constraints:
range: 10-30

.1.3.6.1.4.1.2281.3.1.4.1.38

gnOduStatusXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.5 · 1 row entry · 16 columns

Open in standard view

This table defines the status of the Outdoor unit
of the system.

gnOduStatusXEntry entry .1.3.6.1.4.1.2281.3.1.5.1

This is an entry in the ODU Status Table. This table
contains two rows, indexed by gnOduStatusXId= 3 for drawer1 ODU
and gnOduStatusXId = 4 for drawer2 ODU.

Indexes

gnOduStatusXId

Column Syntax OID

gnOduStatusXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.5.1.1

gnOduStatusXCelsiusTemp mandatory

This is the temperature of the ODU in degrees Celsius.

Integer32

Constraints:
range: -70-80

.1.3.6.1.4.1.2281.3.1.5.1.2

gnOduStatusXFahrenheitTemp mandatory

This is the temperature of the ODU in degrees Fahrenheit.

Integer32

Constraints:
range: -58-176

.1.3.6.1.4.1.2281.3.1.5.1.3

gnOduStatusXTransmitLevel mandatory

This is the transmit level of the signal transmitted by the radios
transmitter, displayed in DBM.

Integer32

Constraints:
range: -99-34

.1.3.6.1.4.1.2281.3.1.5.1.4

gnOduStatusXReceiveLevel mandatory

This is the receive level of the signal transmitted by the radios
transmitter, displayed in DBM.

Integer32

Constraints:
range: -99--15

.1.3.6.1.4.1.2281.3.1.5.1.5

gnOduStatusXSynthesizerVCOLock mandatory

This octet represents the ODU status as follows (bit 1, LSB):
bit 1 on = TX IF synthesizer
bit 2 on = RX IF synthesizer
bit 3 on = Xband synthesizer
bit 4 on = History TX IF synthesizer
bit 5 on = History RX IF synthesi…

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.1.5.1.6

gnOduStatusXPowerSupply mandatory

This octet represents the status of the power
supplies of the ODU:
bit 1 on = +5V faulty
bit 2 on = +8V faulty
bit 3 on = +12V faulty
bit 4 on = -12V faulty.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.1.5.1.7

gnOduStatusXIfcSupported mandatory

Indication for IFC support.

Enumeration

Enumerated Values:

2	yes
3	no

.1.3.6.1.4.1.2281.3.1.5.1.8

gnOduStatusXRslDiversity mandatory

This is the receive level of the space diversity signal, displayed in DBM.

Integer32

Constraints:
range: -99-0

.1.3.6.1.4.1.2281.3.1.5.1.9

gnOduStatusXRslCombined mandatory

This is the receive level of the combined signal, displayed in DBM.

Integer32

Constraints:
range: -99-0

.1.3.6.1.4.1.2281.3.1.5.1.10

gnOduStatusXRfuAddress mandatory

The RFU Address.

Integer32

Constraints:
range: 0-31

.1.3.6.1.4.1.2281.3.1.5.1.11

gnOduStatusXMinTransmitLevel mandatory

This is the minimum transmit level of the signal transmitted by the radios
transmitter, displayed in DBM.. (for RFU unit only)

Integer32

Constraints:
range: -50-34

.1.3.6.1.4.1.2281.3.1.5.1.12

gnOduStatusXOduSWVer mandatory

This is the ODU software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.1.5.1.13

gnOduStatusXOduSWPostVer mandatory

This is the ODU post reset software version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.1.5.1.14

gnOduStatusXRfuFwVer mandatory

This is the RFU FW version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.1.5.1.15

gnOduStatusXValidIntervals mandatory

The number of previous valid intervals for which valid data has been stored
for the specific ODU.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2281.3.1.5.1.16

gnOduMonCurrXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.1 · 1 row entry · 24 columns

Open in standard view

This table defines/keeps the counters of the current 15 min interval.

gnOduMonCurrXEntry entry .1.3.6.1.4.1.2281.3.1.6.1.1

This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrXId= 3 for drawer1 ODU and
gnOduMonCurrXId = 4 for drawer2 ODU.

Indexes

gnOduMonCurrXId

Column Syntax OID

gnOduMonCurrXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.1.1.1

gnOduMonCurrXMinRL mandatory

The minimum received signal level (RL) in the current 15 minute interval.
(in DBM)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.2

gnOduMonCurrXMaxRL mandatory

The maximum received signal level (RL) in the current 15 minute interval.
(in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.3

gnOduMonCurrXTLThresh1Exceed mandatory

The number of seconds TL exceeded the TL1
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.4

gnOduMonCurrXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.5

gnOduMonCurrXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.6

gnOduMonCurrXDayMinRL mandatory

The minimum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.7

gnOduMonCurrXDayMaxRL mandatory

The maximum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.8

gnOduMonCurrXDayTLThresh1Exceed mandatory

The number of seconds TL exceeded the TL1 threshold
in the last 24 hours.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.9

gnOduMonCurrXDayRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1 threshold
in the last 24 hours.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.10

gnOduMonCurrXDayRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2 threshold
in the last 24 hours.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.11

gnOduMonCurrXMinTL mandatory

The minimum transmitted signal level (TL) in the current 15 minute interval.
(in DBM)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.12

gnOduMonCurrXMaxTL mandatory

The maximum transmitted signal level (TL) in the current 15 minute interval.
(in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.13

gnOduMonCurrXDayMinTL mandatory

The minimum Transmitted Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.14

gnOduMonCurrXDayMaxTL mandatory

The maximum Transmitted Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.15

gnOduMonCurrXXpi mandatory

The Current XPI level (in [DBM/100]).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.16

gnOduMonCurrXMinXpi mandatory

The minimum XPI Level (in [DBM/100]).
in the last 15 minute (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.17

gnOduMonCurrXMaxXpi mandatory

The maximum XPI Level (in [DBM/100]).
in the last 15 minute (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.18

gnOduMonCurrXDayMinXpi mandatory

The minimum XPI Level (in [DBM/100]).
in the last 24 hours (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.19

gnOduMonCurrXDayMaxXpi mandatory

The maximum XPI Level (in [DBM/100]).
in the last 24 hours (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.20

gnOduMonCurrXXpiThreshExceed mandatory

The number of seconds XPI beneath the XPI
threshold in the last 15 minutes (future develope).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.21

gnOduMonCurrXDayXpiThreshExceed mandatory

The number of seconds XPI beneath the XPI threshold
in the last 24 hours (future develope).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.1.1.22

gnOduMonCurrXMse mandatory

The Current MSE level (in [DBM/100]).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.1.1.23

gnOduMonCurrXLastDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.1.6.1.1.24

gnOduMonIntervalXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.2 · 1 row entry · 14 columns

Open in standard view

This table defines/keeps the counters of the 96 last intervals of 15 min.

gnOduMonIntervalXEntry entry .1.3.6.1.4.1.2281.3.1.6.2.1

This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalXId= 3 for drawer1 ODU and
gnOduMonIntervalXId = 4 for drawer2 ODU and by interval idx

Indexes

gnOduMonIntervalXId gnOduMonIntervalXIdx

Column Syntax OID

gnOduMonIntervalXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.2.1.1

gnOduMonIntervalXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.1.6.2.1.2

gnOduMonIntervalXMinRL mandatory

The minimum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.3

gnOduMonIntervalXMaxRL mandatory

The maximum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.4

gnOduMonIntervalXTLThresh1Exceed mandatory

The number of seconds TL exceeded the TL1
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.2.1.5

gnOduMonIntervalXEvent mandatory

Events
bit 1 = CommDisc.
bit 2 = CommCon
bit 3 = ATPC2Max.
bit 4 = ATPC2Norm.
Included for future development, not currently supported.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.1.6.2.1.6

gnOduMonIntervalXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.2.1.7

gnOduMonIntervalXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.2.1.8

gnOduMonIntervalXMinTL mandatory

The minimum TL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.9

gnOduMonIntervalXMaxTL mandatory

The maximum TL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.10

gnOduMonIntervalXMinXpi mandatory

The minimum XPI level (in [DBM/100]) in a 15 minutes intervalin (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.11

gnOduMonIntervalXMaxXpi mandatory

The maximum XPI level (in [DBM/100]) in a 15 minutes interval (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.2.1.12

gnOduMonIntervalXXpiThreshExceed mandatory

The number of seconds XPI exceeded the XPI
threshold in a 15 minutes interval (future develope).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.2.1.13

gnOduMonIntervalXIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.1.6.2.1.14

gnOduMonDayXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.3 · 1 row entry · 13 columns

Open in standard view

This table defines/keeps the counters of 96 intervals of 15 min.

gnOduMonDayXEntry entry .1.3.6.1.4.1.2281.3.1.6.3.1

This is an entry in the Days Table. This table
is indexed by gnOduMonDayXId= 3 for drawer1 ODU and
gnOduMonDayXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayIdx = 1 is one day from now,
gnOduMonDayIdx = 2 is two day…

Indexes

gnOduMonDayXId gnOduMonDayXIdx

Column Syntax OID

gnOduMonDayXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.3.1.1

gnOduMonDayXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.1.6.3.1.2

gnOduMonDayXMinRL mandatory

The minimum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.3

gnOduMonDayXMaxRL mandatory

The maximum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.4

gnOduMonDayXTLThresh1Exceed mandatory

The number of seconds TL exceeded the TL1 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.3.1.5

gnOduMonDayXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.3.1.6

gnOduMonDayXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.3.1.7

gnOduMonDayXMinTL mandatory

The minimum Transmit Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.8

gnOduMonDayXMaxTL mandatory

The maximum Transmit Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.9

gnOduMonDayXMinXpi mandatory

The minimum XPI Level (in [DBM/100]) in a 24 hour interval (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.10

gnOduMonDayXMaxXpi mandatory

The maximum XPI Level (in [DBM/100]) in a 24 hour interval (future develope).
For [DBM] level divide by 100.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.3.1.11

gnOduMonDayXXpiThreshExceed mandatory

The number of seconds XPI exceeded the XPI threshold
in a 24 hour interval (future develope).

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.3.1.12

gnOduMonDayXIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.1.6.3.1.13

gnOduMonCurrDiversityXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.4 · 1 row entry · 9 columns

Open in standard view

This table defines/keeps the counters of the current 15 min interval.

gnOduMonCurrDiversityXEntry entry .1.3.6.1.4.1.2281.3.1.6.4.1

This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and
gnOduMonCurrDiversityXId = 4 for drawer2 ODU.

Indexes

gnOduMonCurrDiversityXId

Column Syntax OID

gnOduMonCurrDiversityXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.4.1.1

gnOduMonCurrDiversityXMinRL mandatory

The minimum received signal level (RL) in the current 15 minute interval.
(in DBM)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.2

gnOduMonCurrDiversityXMaxRL mandatory

The maximum received signal level (RL) in the current 15 minute interval.
(in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.3

gnOduMonCurrDiversityXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.4.1.4

gnOduMonCurrDiversityXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.4.1.5

gnOduMonCurrDiversityXDayMinRL mandatory

The minimum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.6

gnOduMonCurrDiversityXDayMaxRL mandatory

The maximum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.7

gnOduMonCurrDiversityXDayRLThresh1Exceed mandatory

The number of seconds Diversity RL exceeded the RL1 threshold
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.8

gnOduMonCurrDiversityXDayRLThresh2Exceed mandatory

The number of seconds Diversity RL exceeded the RL2 threshold
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.4.1.9

gnOduMonIntervalDiversityXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.5 · 1 row entry · 6 columns

Open in standard view

This table defines/keeps the counters of the 96 last intervals of 15 min.

gnOduMonIntervalDiversityXEntry entry .1.3.6.1.4.1.2281.3.1.6.5.1

This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalDiversityXId= 3 for drawer1 ODU and
gnOduMonIntervalDiversityXId = 4 for drawer2 ODU and by interval idx

Indexes

gnOduMonIntervalDiversityXId gnOduMonIntervalDiversityXIdx

Column Syntax OID

gnOduMonIntervalDiversityXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.5.1.1

gnOduMonIntervalDiversityXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.1.6.5.1.2

gnOduMonIntervalDiversityXMinRL mandatory

The minimum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.5.1.3

gnOduMonIntervalDiversityXMaxRL mandatory

The maximum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.5.1.4

gnOduMonIntervalDiversityXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.5.1.5

gnOduMonIntervalDiversityXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.5.1.6

gnOduMonDayDiversityXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.6 · 1 row entry · 6 columns

Open in standard view

This table defines/keeps the counters of 96 intervals of 15 min.

gnOduMonDayDiversityXEntry entry .1.3.6.1.4.1.2281.3.1.6.6.1

This is an entry in the Days Table. This table
is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and
gnOduMonDayDiversityXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayDiversityXIdx = 1 is one day from now,
g…

Indexes

gnOduMonDayDiversityXId gnOduMonDayDiversityXIdx

Column Syntax OID

gnOduMonDayDiversityXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.6.1.1

gnOduMonDayDiversityXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.1.6.6.1.2

gnOduMonDayDiversityXMinRL mandatory

The minimum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.6.1.3

gnOduMonDayDiversityXMaxRL mandatory

The maximum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.6.1.4

gnOduMonDayDiversityXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.6.1.5

gnOduMonDayDiversityXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.6.1.6

gnOduMonCurrCombinedXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.7 · 1 row entry · 9 columns

Open in standard view

This table defines/keeps the counters of the current 15 min interval.

gnOduMonCurrCombinedXEntry entry .1.3.6.1.4.1.2281.3.1.6.7.1

This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnOduMonCurrCombinedXId= 3 for drawer1 ODU and
gnOduMonCurrCombinedXId = 4 for drawer2 ODU.

Indexes

gnOduMonCurrCombinedXId

Column Syntax OID

gnOduMonCurrCombinedXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.7.1.1

gnOduMonCurrCombinedXMinRL mandatory

The minimum received signal level (RL) in the current 15 minute interval.
(in DBM)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.2

gnOduMonCurrCombinedXMaxRL mandatory

The maximum received signal level (RL) in the current 15 minute interval.
(in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.3

gnOduMonCurrCombinedXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.7.1.4

gnOduMonCurrCombinedXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in the last 15 minutes.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.7.1.5

gnOduMonCurrCombinedXDayMinRL mandatory

The minimum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.6

gnOduMonCurrCombinedXDayMaxRL mandatory

The maximum Receive Level (in DBM).
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.7

gnOduMonCurrCombinedXDayRLThresh1Exceed mandatory

The number of seconds Combined RL exceeded the RL1 threshold
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.8

gnOduMonCurrCombinedXDayRLThresh2Exceed mandatory

The number of seconds Combined RL exceeded the RL2 threshold
in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.7.1.9

gnOduMonIntervalCombinedXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.8 · 1 row entry · 6 columns

Open in standard view

This table defines/keeps the counters of the 96 last intervals of 15 min.

gnOduMonIntervalCombinedXEntry entry .1.3.6.1.4.1.2281.3.1.6.8.1

This is an entry in the Interval Table. This table
is indexed by gnOduMonIntervalCombinedXId= 3 for drawer1 ODU and
gnOduMonIntervalCombinedXId = 4 for drawer2 ODU and by interval idx

Indexes

gnOduMonIntervalCombinedXId gnOduMonIntervalCombinedXIdx

Column Syntax OID

gnOduMonIntervalCombinedXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.8.1.1

gnOduMonIntervalCombinedXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.1.6.8.1.2

gnOduMonIntervalCombinedXMinRL mandatory

The minimum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.8.1.3

gnOduMonIntervalCombinedXMaxRL mandatory

The maximum RL in a 15 minutes interval. (in DBM).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.8.1.4

gnOduMonIntervalCombinedXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.8.1.5

gnOduMonIntervalCombinedXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2
threshold in a 15 minutes interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.8.1.6

gnOduMonDayCombinedXTable

table mandatory

.1.3.6.1.4.1.2281.3.1.6.9 · 1 row entry · 6 columns

Open in standard view

This table defines/keeps the counters of 96 intervals of 15 min.

gnOduMonDayCombinedXEntry entry .1.3.6.1.4.1.2281.3.1.6.9.1

This is an entry in the Days Table. This table
is indexed by gnOduMonDayDiversityXId= 3 for drawer1 ODU and
gnOduMonDayCombinedXId = 4 for drawer2 ODU and by day idx.
gnOduMonDayCombinedXIdx = 1 is one day from now,
gnO…

Indexes

gnOduMonDayCombinedXId gnOduMonDayCombinedXIdx

Column Syntax OID

gnOduMonDayCombinedXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.1.6.9.1.1

gnOduMonDayCombinedXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.1.6.9.1.2

gnOduMonDayCombinedXMinRL mandatory

The minimum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.9.1.3

gnOduMonDayCombinedXMaxRL mandatory

The maximum Receive Level (in DBM).
in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.1.6.9.1.4

gnOduMonDayCombinedXRLThresh1Exceed mandatory

The number of seconds RL exceeded the RL1 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.9.1.5

gnOduMonDayCombinedXRLThresh2Exceed mandatory

The number of seconds RL exceeded the RL2 threshold
in a 24 hour interval.

RFC1155-SMICounter

Textual Convention: RFC1155-SMICounter Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.1.6.9.1.6

gnMdmStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.2 · 1 row entry · 5 columns

Open in standard view

This table maintains the status of the Indoor part
of the system.

gnMdmStatEntry entry .1.3.6.1.4.1.2281.3.2.1.2.1

This is an entry in the IDU Modem Configuration Table. This table
contains two rows, indexed by ifIndex= 1 for local modem and
ifIndex = 101 for remote modem.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnMdmModStatus mandatory

This parameters indicates a modem fault.

Enumeration

Enumerated Values:

2	ok
3	modulatorFault

.1.3.6.1.4.1.2281.3.2.1.2.1.1

gnMdmDemodStatus mandatory

This parameters indicates a demodem fault - For internal use.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.2.1.2

gnMdmDefectBlocks mandatory

The number of defected blocks that could not be corrected by the
FEC

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.2.1.3

gnMdmBytesCorrected mandatory

Number of bytes corrected by the FEC

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.2.1.4

gnMdmClearBC mandatory

clears Defected Blocks, Defected Bytes and Blocks Corrected.

Enumerationr/w

Enumerated Values:

2	noAction
3	clear

.1.3.6.1.4.1.2281.3.2.1.2.1.5

gnMdmStatXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.3 · 1 row entry · 18 columns

Open in standard view

This table maintains the status of the Indoor part
of the system.

gnMdmStatXEntry entry .1.3.6.1.4.1.2281.3.2.1.3.1

This is an entry in the IDU Modem Configuration Table.

Indexes

gnMdmStatXId

Column Syntax OID

gnMdmStatXId mandatory

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.3.1.1

gnMdmStatXStandardOrg mandatory

This parameter specifies which international standard is used.

Enumeration

Enumerated Values:

2	etsi
3	fcc
4	japan
5	lmds
6	cmds
7	australia
8	other

.1.3.6.1.4.1.2281.3.2.1.3.1.2

gnMdmStatXRemoteConnection mandatory

Is the connection between the local manager and
the remote manager.

Enumeration

Enumerated Values:

2	connected
3	disconnected

.1.3.6.1.4.1.2281.3.2.1.3.1.3

gnMdmStatXModemType mandatory

This parameter specifies the modem qam.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2281.3.2.1.3.1.4

gnMdmStatXModemWorkTime mandatory

The modem Work Time (hours).

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.3.1.5

gnMdmStatXModemSerialNumber mandatory

This is the modem serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.3.2.1.3.1.6

gnMdmStatXModemFWVer mandatory

This is the Modem firmware version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.1.3.1.7

gnMdmStatXModemFWPostVer mandatory

This is the Modem post reset firmware version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.1.3.1.8

gnMdmStatXModemScriptVer mandatory

This is the Modem script version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.1.3.1.9

gnMdmStatXModemScriptPostVer mandatory

This is the Modem post reset script version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.1.3.1.10

gnMdmStatXIfLoopbackTimeOut mandatory

This variable indicates the remaining time (in minutes)
till the relevant loopback timer will be expired.
when starting a loopback and the value of gnMdmStatXIfLoopbackTimeOut is x,
the gnMdmStatXIfLoopbackTimeOut will …

Integer32

Constraints:
range: 0-1440

.1.3.6.1.4.1.2281.3.2.1.3.1.11

gnMdmStatXBoardType mandatory

This parameter defines the type of the modem for NMS use.

Enumeration

Enumerated Values:

2	v1
3	v2
4	v3

.1.3.6.1.4.1.2281.3.2.1.3.1.12

gnMdmStatXDefectedBlocks mandatory

The number of defected blocks.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.3.1.13

gnMdmStatXScriptType mandatory

This parameter specifies the type of the script.
v1 - Regular MRMC script.
v2 - ACM MRMC script.

Enumeration

Enumerated Values:

2	v1
3	v2

.1.3.6.1.4.1.2281.3.2.1.3.1.14

gnMdmStatXAcmValidIntervals mandatory

This value indicates the number of valid intervals.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2281.3.2.1.3.1.15

gnMdmStatXAcmSignalValid mandatory

This value indicates whether the modem is lock in ACM.

Enumeration

Enumerated Values:

2	valid
3	notValid

.1.3.6.1.4.1.2281.3.2.1.3.1.16

gnMdmStatXTxConstellation mandatory

This value indicates the current Tx modem constellation.

Integer32

Constraints:
range: 0-1024

.1.3.6.1.4.1.2281.3.2.1.3.1.17

gnMdmStatXRxConstellation mandatory

This value indicates the current Rx modem constellation.

Integer32

Constraints:
range: 0-1024

.1.3.6.1.4.1.2281.3.2.1.3.1.18

gnMdmCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.4 · 1 row entry · 2 columns

Open in standard view

gnMdmCfgEntry entry .1.3.6.1.4.1.2281.3.2.1.4.1

Indexes

gnMdmCfgId

Column Syntax OID

gnMdmCfgId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.2.1.4.1.1

gnMdmCfgDiversityMode mandatory

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.1.4.1.2

gnMdmCfgXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.5 · 1 row entry · 11 columns

Open in standard view

This table defines the configuration of modem.

gnMdmCfgXEntry entry .1.3.6.1.4.1.2281.3.2.1.5.1

This is an entry in the modem configuration table.

Indexes

gnMdmCfgXId

Column Syntax OID

gnMdmCfgXId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.5.1.1

gnMdmCfgXLatencyType mandatory

Enumerationr/w

Enumerated Values:

2	low
3	high

.1.3.6.1.4.1.2281.3.2.1.5.1.2

gnMdmCfgXLinkId mandatory

0 for 'old' system that doesn't support the link ID.
the user can enter values from 1 to 65535

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.2.1.5.1.3

gnMdmCfgXRadioSide mandatory

Enumerationr/w

Enumerated Values:

2	east
3	west

.1.3.6.1.4.1.2281.3.2.1.5.1.4

gnMdmCfgXMrmcConf mandatory

The Link data capacity

Enumerationr/w

Enumerated Values:

1	mrmc1528
2	mrmc1550
3	mrmc3156
4	mrmc3150
5	mrmc1228
6	mrmc1540
7	mrmc4410
8	mrmc4420
9	mrmc4440
10	mrmc1125
11	mrmc2050
12	mrmc2030
13	mrmc1340
18	mrmc3756
24	acm56
25	acm50
26	acm28

.1.3.6.1.4.1.2281.3.2.1.5.1.5

gnMdmCfgXIfLoopback mandatory

This parameter enable the user to activate a loopback.

Enumerationr/w

Enumerated Values:

2	none
3	active

.1.3.6.1.4.1.2281.3.2.1.5.1.6

gnMdmCfgXHwReset mandatory

hwReset - Hardware reset for modem board.

Enumerationr/w

Enumerated Values:

2	noOperation
3	hwReset

.1.3.6.1.4.1.2281.3.2.1.5.1.7

gnMdmCfgXPrbsTest mandatory

This parameter enable the user to activate the PRBS test.

Enumerationr/w

Enumerated Values:

2	notActive
3	active

.1.3.6.1.4.1.2281.3.2.1.5.1.8

gnMdmCfgXClearCounters mandatory

This parameter enable the user to clear the PRBS counters.

Enumerationr/w

Enumerated Values:

2	noAction
3	clearCounters

.1.3.6.1.4.1.2281.3.2.1.5.1.9

gnMdmCfgXAcmOperationMode mandatory

This parameter set the administrative status of the ACM operational mode, this mode is valid on ACM script only.

Enumerationr/w

Enumerated Values:

1	adaptive
2	acm4QAM
3	acm8QAM
4	acm16QAM
5	acm32QAM
6	acm64QAM
7	acm128QAM
8	acm256QAM

.1.3.6.1.4.1.2281.3.2.1.5.1.10

gnMdmCfgXAcmMaximumConstellation mandatory

This parameter set the maximum constellation of the ACM.

Enumerationr/w

Enumerated Values:

2	acm4QAM
3	acm8QAM
4	acm16QAM
5	acm32QAM
6	acm64QAM
7	acm128QAM
8	acm256QAM

.1.3.6.1.4.1.2281.3.2.1.5.1.11

gnMdmAcmStatXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.6 · 1 row entry · 4 columns

Open in standard view

This table defines the ACM status.

gnMdmAcmStatXEntry entry .1.3.6.1.4.1.2281.3.2.1.6.1

This is an entry in the modem ACM status table.

Indexes

gnMdmAcmStatXId gnMdmAcmStatXQamId

Column Syntax OID

gnMdmAcmStatXId mandatory

This value indicates which device is involved in the specific row.

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.6.1.1

gnMdmAcmStatXQamId mandatory

This value indicates which QAM is involved in a specific row.

Enumeration

Enumerated Values:

2	acm4QAM
3	acm8QAM
4	acm16QAM
5	acm32QAM
6	acm64QAM
7	acm128QAM
8	acm256QAM

.1.3.6.1.4.1.2281.3.2.1.6.1.2

gnMdmAcmStatXRoundedThroughput mandatory

This value indicates on the rounded throuphput of a specific constellation.

Integer32

Constraints:
range: 0-1000

.1.3.6.1.4.1.2281.3.2.1.6.1.3

gnMdmAcmStatXSupportedThroughput mandatory

This value indicates whether the specific constellation is supported.

Enumeration

Enumerated Values:

2	notSupport
3	support

.1.3.6.1.4.1.2281.3.2.1.6.1.4

gnMdmAcmMonCurrXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.7.1.1 · 1 row entry · 7 columns

Open in standard view

This table defines/keeps the counters of the current 15 min interval.

gnMdmAcmMonCurrXEntry entry .1.3.6.1.4.1.2281.3.2.1.7.1.1.1

This is an entry in the Current Interval Table. This table
contains two rows, indexed by gnMdmAcmMonCurrXId= 3 for drawer1 modem and
gnMdmAcmMonCurrXId = 4 for drawer2 modem.

Indexes

gnMdmAcmMonCurrXId

Column Syntax OID

gnMdmAcmMonCurrXId mandatory

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.1

gnMdmAcmMonCurrXMinConstellation mandatory

The minimum modem constellation in the current 15 minute interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.2

gnMdmAcmMonCurrXMaxConstellation mandatory

The maximum modem constellation in the current 15 minute interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.3

gnMdmAcmMonCurrXIDF mandatory

IDF = Invalid Data Flag in current 15 minute interval.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.4

gnMdmAcmMonCurrXDayMinConstellation mandatory

The minimum modem constellation in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.5

gnMdmAcmMonCurrXDayMaxConstellation mandatory

The maximum modem constellation in the last 24 hours.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.6

gnMdmAcmMonCurrXDayIDF mandatory

IDF = Invalid Data Flag in in the last 24 hours.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.1.7.1.1.1.7

gnMdmAcmMonIntervalXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.7.1.2 · 1 row entry · 5 columns

Open in standard view

This table defines/keeps the counters of the 96 last intervals of 15 min.

gnMdmAcmMonIntervalXEntry entry .1.3.6.1.4.1.2281.3.2.1.7.1.2.1

This is an entry in the Interval Table. This table
is indexed by gnMdmAcmMonIntervalXId= 3 for drawer1 modem and
gnMdmAcmMonIntervalXId = 4 for drawer2 modem and by interval idx

Indexes

gnMdmAcmMonIntervalXId gnMdmAcmMonIntervalXIdx

Column Syntax OID

gnMdmAcmMonIntervalXId mandatory

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.7.1.2.1.1

gnMdmAcmMonIntervalXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.2.1.7.1.2.1.2

gnMdmAcmMonIntervalXMinConstellation mandatory

The minimum constellation in a 15 minutes interval

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.2.1.3

gnMdmAcmMonIntervalXMaxConstellation mandatory

The maximum constellation in a 15 minutes interval

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.2.1.4

gnMdmAcmMonIntervalXIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.1.7.1.2.1.5

gnMdmAcmMonDayXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.1.7.1.3 · 1 row entry · 5 columns

Open in standard view

This table defines/keeps the counters of 30 intervals of 24 hours.

gnMdmAcmMonDayXEntry entry .1.3.6.1.4.1.2281.3.2.1.7.1.3.1

This is an entry in the Days Table. This table
is indexed by gnMdmAcmMonDayXId= 3 for drawer1 modem and
gnMdmAcmMonDayXId = 4 for drawer2 modem and by day idx.
gnMdmAcmMonDayIdx = 1 is one day from now,
gnMdmAcmMonDayId…

Indexes

gnMdmAcmMonDayXId gnMdmAcmMonDayXIdx

Column Syntax OID

gnMdmAcmMonDayXId mandatory

Enumeration

Enumerated Values:

3	modem1
4	modem2

.1.3.6.1.4.1.2281.3.2.1.7.1.3.1.1

gnMdmAcmMonDayXIdx mandatory

The interval number to which this row is related.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.2.1.7.1.3.1.2

gnMdmAcmMonDayXMinConstellation mandatory

The minimum modem constellation in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.3.1.3

gnMdmAcmMonDayXMaxConstellation mandatory

The maximum modem constellation in a 24 hour interval.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.1.7.1.3.1.4

gnMdmAcmMonDayXIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.1.7.1.3.1.5

gnSpiCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.2.1 · 1 row entry · 1 columns

Open in standard view

This table defines the configuration of the SPI part
of the system.

gnSpiCfgEntry entry .1.3.6.1.4.1.2281.3.2.2.1.1

This is an entry in the SPI Configuration Table. This table
contains two rows, indexed by ifIndex= 2 for local SPI and
ifIndex = 102 for remote SPI.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnSpiCfgConnector mandatory

The physical connector of the SPI - Used only in old regenerators

Enumeration

Enumerated Values:

1	nointerface
2	fiber
3	electrical
4	utp
5	stp

.1.3.6.1.4.1.2281.3.2.2.1.1.1

gnRstCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.1 · 1 row entry · 15 columns

Open in standard view

This table defines the configuration of the regenerator part
of the MUX.

gnRstCfgEntry entry .1.3.6.1.4.1.2281.3.2.3.1.1

This is an entry in the Regenerator part of the MUX Configuration Table.
This table contains a row for every interface which type is SONET(39).
for example regenerator on local and remote sides will have four entries
1…

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnRstCfgTransmittedJ0 mandatory

This is the J0 string that would be sent. This string must be 15
characters in length.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.1.1.1

gnRstCfgExpectedJ0 mandatory

This is the J0 string that is expected to be received. This string must be
15 characters in length.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.1.1.2

gnRstCfgTransparencyJ0 mandatory

Send the received J0 string transparently or send the Transmitted J0
configured string.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough
4	notActive

.1.3.6.1.4.1.2281.3.2.3.1.1.3

gnRstCfgRSTAISMode mandatory

In the case of a J0 mismatch error, send or don't send AIS.

Enumerationr/w

Enumerated Values:

2	sendAIS
3	doNotSendAIS

.1.3.6.1.4.1.2281.3.2.3.1.1.4

gnRstCfgRstEXCThresh mandatory

If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive.

Enumerationr/w

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5

.1.3.6.1.4.1.2281.3.2.3.1.1.5

gnRstCfgRstSDThresh mandatory

If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade.

Enumerationr/w

Enumerated Values:

3	tenExpMinus6
4	tenExpMinus7
5	tenExpMinus8
6	tenExpMinus9

.1.3.6.1.4.1.2281.3.2.3.1.1.6

gnRstCfgTransparencyE1 mandatory

Transmit the order wire data received or terminate the E1 data received.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough
4	disable

.1.3.6.1.4.1.2281.3.2.3.1.1.7

gnRstCfgTransparencyF1 mandatory

Transmit the F1/User channel data received or terminate the F1/User channel data received.
set the TransparencyF1 to disable when the User channel used by In-Band management.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough
4	disable

.1.3.6.1.4.1.2281.3.2.3.1.1.8

gnRstCfgTransparencyUnscrambled mandatory

Transmit the unscrambled national bytes data received or terminate the
unscrambled national bytes data received.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough

.1.3.6.1.4.1.2281.3.2.3.1.1.9

gnRstCfgMngByteLocation mandatory

This parameter indicates which media specific bytes are in use and which
are transparent.
not currently supported

Enumerationr/w

Enumerated Values:

2	mediaSpecificBytes
3	spareA1A0Bytes
4	e1Byets
5	noMngBytes
6	dccr
7	dccm
8	userChannel
9	waysideChannel

.1.3.6.1.4.1.2281.3.2.3.1.1.10

gnRstCfgE1waysideChannel mandatory

If this parameter is enabled, an E1 wayside channel will be sent
through the network using the unused bytes in the SDH header.

Enumerationr/w

Enumerated Values:

2	enabled
3	disabled

.1.3.6.1.4.1.2281.3.2.3.1.1.11

gnRstCfgTransparencyDCCR mandatory

Transmit on the DCCR channel or terminate the DCCR channel.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough

.1.3.6.1.4.1.2281.3.2.3.1.1.12

gnRstCfgTransparencyB1Chan mandatory

Correct B1 byte or send transmit it transparently .

Enumerationr/w

Enumerated Values:

2	active
3	passthrough

.1.3.6.1.4.1.2281.3.2.3.1.1.13

gnRstCfgTestActivate mandatory

This field allows the NMS to activate the
following tests:
bit 1 = 1 Force AIS
bit 2 = 1 Force RDI.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.2.3.1.1.14

gnRstCfgLoopbackOption mandatory

This parameter enable the user to activate a loopback .

Enumerationr/w

Enumerated Values:

2	noloopback
3	interfaceInterLoop
4	interfaceExterLoop

.1.3.6.1.4.1.2281.3.2.3.1.1.15

gnRstStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.2 · 1 row entry · 4 columns

Open in standard view

This table defines the status of the regenerator part
of the MUX.

gnRstStatEntry entry .1.3.6.1.4.1.2281.3.2.3.2.1

This is an entry in the Regenerator part of the MUX
Status Table. This table contains a row for every interface which type is
SONET(39).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnRstStatReceivedJ0 mandatory

This is the J0 string received.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.2.1.1

gnRstStatBERCur mandatory

Current Bit Error Rate.

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.2.1.2

gnRstStatStatus mandatory

bit 2 = LOS
bit 3 = LOF
bit 7 = TIM
bit 9 = SD
bit 10 = EXC
bit 11 = UNEXP

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.3.2.3.2.1.3

gnRstStatClearLoopTimer mandatory

This variable indicates the remaining time (in minutes)
till the relevant loopback timer will be expired.
when starting a loopback and the value of gnGenCfgClearLoopTimeout is x,
the gnRstStatClearLoopTimer will be also…

Integer32

Constraints:
range: 0-1440

.1.3.6.1.4.1.2281.3.2.3.2.1.4

gnRstMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.3.1 · 1 row entry · 8 columns

Open in standard view

This table maintains the counters of the regenerator part
of the MUX.

gnRstMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.3.1.1

This is an entry in the Regenerator part of the MUX
Counters Table. This table contains a row for every interface which type
is SONET(39).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnRstMonCurrBBE mandatory

The current number of Background Block Errors
starting from the present 15 minutes period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.1

gnRstMonCurrUAS mandatory

The current number of Unavailable Seconds
starting from the present 15 minutes period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.2

gnRstMonCurrLastDayES mandatory

The current number of Errored Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.3

gnRstMonCurrLastDaySES mandatory

The current number of Severely Errored Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.4

gnRstMonCurrLastDayBBE mandatory

The current number of Background Block Errors
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.5

gnRstMonCurrLastDayUAS mandatory

The current number of Unavailable Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.6

gnRstMonCurrLastDayOFS mandatory

The current number of Out Of Frame Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.1.1.7

gnRstMonCurrLastDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.3.3.1.1.8

gnRstMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.3.2 · 1 row entry · 4 columns

Open in standard view

This table maintains the counters of the regenerator part
of the MUX per interval.

gnRstMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.3.2.1

This is an entry in the Regenerator part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 96 and rep…

Indexes

RFC1213-MIBifIndex gnRstMonIntervalIdx

Column Syntax OID

gnRstMonIntervalIdx mandatory

This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.2.3.3.2.1.1

gnRstMonIntervalBBE mandatory

The number of Background Block Errors
per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.2.1.2

gnRstMonIntervalUAS mandatory

The number of Unavailable Seconds per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.2.1.3

gnRstMonIntervalIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.3.3.2.1.4

gnRstMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.3.3 · 1 row entry · 7 columns

Open in standard view

This table maintains the counters of the regenerator part
of the MUX per 24 hours interval.

gnRstMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.3.3.1

Indexes

RFC1213-MIBifIndex gnRstMonDayIdx

Column Syntax OID

gnRstMonDayIdx mandatory

This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.2.3.3.3.1.1

gnRstMonDayES mandatory

The number of Errored Seconds per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.3.1.2

gnRstMonDaySES mandatory

The number of Severely Errored Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.3.1.3

gnRstMonDayBBE mandatory

The number of Background Block Errors
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.3.1.4

gnRstMonDayUAS mandatory

The number of Unavailable Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.3.1.5

gnRstMonDayOFS mandatory

The number of Out Of Frame Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.2.3.3.3.1.6

gnRstMonDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.2.3.3.3.1.7

gnMstCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.4 · 1 row entry · 2 columns

Open in standard view

This table maintains the counters of the MST part
of the MUX.

gnMstCfgEntry entry .1.3.6.1.4.1.2281.3.2.3.4.1

This is an entry in the MST part of the MUX
Configuration Table. This table contains a row for every interface
which type is SONET(39).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnMstCfgEXCThresh mandatory

If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive.

Enumerationr/w

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5

.1.3.6.1.4.1.2281.3.2.3.4.1.1

gnMstCfgSDThresh mandatory

If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade.

Enumerationr/w

Enumerated Values:

3	tenExpMinus6
4	tenExpMinus7
5	tenExpMinus8
6	tenExpMinus9

.1.3.6.1.4.1.2281.3.2.3.4.1.2

gnMstStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.5 · 1 row entry · 8 columns

Open in standard view

This table defines the status of the MST part
of the MUX.

gnMstStatEntry entry .1.3.6.1.4.1.2281.3.2.3.5.1

This is an entry in the MST part of the MUX
Status Table. This table contains a row for every interface which type is
SONET(39).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnMstStatReceivedS1 mandatory

Received Synchronization status byte.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.5.1.1

gnMstStatStatus mandatory

Alarm status. Bit 1 is MSB, bit=1 when alarm active.
bit 5 = RDI
bit 6 = AIS
bit 9 = SD
bit 10 = EXC
bit 16 = PAM (MSP)
bit 17 = SCM (MSP)
bit 18 = INV (MSP)

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.5.1.2

gnMstStatTransmitS1 mandatory

Transmitted Synchronization status byte.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.5.1.3

gnMstStatCurrentBer mandatory

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.5.1.4

gnMstStatReceivedK1 mandatory

Received K1 byte (Automatic Protection Switch message).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2281.3.2.3.5.1.5

gnMstStatReceivedK2 mandatory

Received K2 byte (Automatic Protection Switch message).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2281.3.2.3.5.1.6

gnMstStatTransmitK1 mandatory

Transmitted K1 byte (Automatic Protection Switch message).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2281.3.2.3.5.1.7

gnMstStatTransmitK2 mandatory

Transmitted K2 byte (Automatic Protection Switch message).

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2281.3.2.3.5.1.8

gnMstMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.1 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the MST part
of the MUX.

gnMstMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.6.1.1

This is an entry in the MST part of the MUX
Counters Table. This table contains a row for every interface which type
is SONET(39).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnMstMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.1`
gnMstMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.2`
gnMstMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.3`
gnMstMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.4`
gnMstMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.5`
gnMstMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.1.1.6`

gnMstMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.2 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the MST part
of the MUX per interval.

gnMstMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.6.2.1

This is an entry in the MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 96 and representin…

Indexes

RFC1213-MIBifIndex gnMstMonIntervalIdx

Column	Syntax	OID
gnMstMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.6.2.1.1`
gnMstMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.2.1.2`
gnMstMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.2.1.3`

gnMstMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.3 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the MST part
of the MUX per 24 hours interval.

gnMstMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.6.3.1

Indexes

RFC1213-MIBifIndex gnMstMonDayIdx

Column	Syntax	OID
gnMstMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.6.3.1.1`
gnMstMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.3.1.2`
gnMstMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.3.1.3`
gnMstMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.3.1.4`
gnMstMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.3.1.5`

gnMstFarEndMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.4 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the far end MST part of the MUX.
This Table is not supported.

gnMstFarEndMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.6.4.1

This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnMstFarEndMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.1`
gnMstFarEndMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.2`
gnMstFarEndMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.3`
gnMstFarEndMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.4`
gnMstFarEndMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.5`
gnMstFarEndMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.4.1.6`

gnMstFarEndMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.5 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the far end MST part
of the MUX per interval.
This Table is not supported.

gnMstFarEndMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.6.5.1

This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39)
This table is indexed by an interval index, between 1
to 96 and repr…

Indexes

RFC1213-MIBifIndex gnMstFarEndMonIntervalIdx

Column	Syntax	OID
gnMstFarEndMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.6.5.1.1`
gnMstFarEndMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.5.1.2`
gnMstFarEndMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.5.1.3`

gnMstFarEndMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.6.6 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the far end MST part
of the MUX per 24 hours interval.
This Table is not supported.

gnMstFarEndMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.6.6.1

This is an entry in the far end MST part of the MUX
Counters Table. This table contains an interface index for every interface
which type is SONET(39).
This table is indexed by an interval index, between 1
to 30 and rep…

Indexes

RFC1213-MIBifIndex gnMstFarEndMonDayIdx

Column	Syntax	OID
gnMstFarEndMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.6.6.1.1`
gnMstFarEndMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.6.1.2`
gnMstFarEndMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.6.1.3`
gnMstFarEndMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.6.1.4`
gnMstFarEndMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.6.6.1.5`

gnHptCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.7 · 1 row entry · 13 columns

Open in standard view

This table maintains the counters of the HPT part
of the MUX.

gnHptCfgEntry entry .1.3.6.1.4.1.2281.3.2.3.7.1

This is an entry in the HPT part of the MUX
Configuration Table. This table contains an interface index for every
interface
which type is PATH(50, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnHptCfgTransmittedJ1 mandatory

This is the J1 string that would be sent.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.7.1.1

gnHptCfgExpectedJ1 mandatory

This is the J1 string that is expected to be received.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.7.1.2

gnHptCfgMismatchJ1 mandatory

In case of a J1 mismatch error, send or don't send AIS.

Enumerationr/w

Enumerated Values:

2	sendAlarm
3	sendAIS

.1.3.6.1.4.1.2281.3.2.3.7.1.3

gnHptCfgTransparencyJ1 mandatory

Send the received J1 string transparently or send the Transmitted J1
configured string.

Enumerationr/w

Enumerated Values:

2	active
3	passthrough
4	notActive

.1.3.6.1.4.1.2281.3.2.3.7.1.4

gnHptCfgEXCThresh mandatory

If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive.

Enumerationr/w

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5

.1.3.6.1.4.1.2281.3.2.3.7.1.5

gnHptCfgSDThresh mandatory

If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade.

Enumerationr/w

Enumerated Values:

3	tenExpMinus6
4	tenExpMinus7
5	tenExpMinus8
6	tenExpMinus9

.1.3.6.1.4.1.2281.3.2.3.7.1.6

gnHptCfgTug3Structure1 mandatory

This field set the TUG-3 #1 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG3 #1. (the K of the KLM index is 1)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET)…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.7

gnHptCfgTug3Structure2 mandatory

This field set the TUG-3 #2 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #2. (the K of the KLM index is 2)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.8

gnHptCfgTug3Structure3 mandatory

This field set the TUG-3 #3 structure: (hexadecimal number)
the lsb 4 bits set VC12=0 or VC3=1 structure to the TUG-3 #3. (the K of the KLM index is 3)
for VC12 structure the next 21 bits (for SDH) or 28 bits (for SONET…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.9

gnHptCfgSignalLabelMismatch mandatory

In case of a C2 mismatch error, send or don't send AIS.

Enumerationr/w

Enumerated Values:

2	sendAlarm
3	sendAIS

.1.3.6.1.4.1.2281.3.2.3.7.1.10

gnHptCfgTrailPT1 mandatory

This field set the TUG-3 #1 Trails Pass Through (hexadecimal number)
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or VC…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.11

gnHptCfgTrailPT2 mandatory

This field set the TUG-3 #2 Trails Pass Through (hexadecimal number).
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or V…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.12

gnHptCfgTrailPT3 mandatory

This field set the TUG-3 #3 Trails Pass Through (hexadecimal number)
It used by the NMS to indicate that a trail is not 'ended' on this ADM, but it is the
last in the configuration chain.
the lsb 4 bits set VC12=0 or VC…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.7.1.13

gnHptStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.8 · 1 row entry · 5 columns

Open in standard view

This table defines the status of the HPT part
of the MUX.

gnHptStatEntry entry .1.3.6.1.4.1.2281.3.2.3.8.1

This is an entry in the HPT part of the MUX
Status Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnHptStatReceivedJ1 mandatory

This is the J1 string that was received.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.8.1.1

gnHptStatStatus mandatory

Alarm status byte. Bit 1 is MSB, bit=1 when alarm active.
bit 4 = LOP
bit 5 = RDI
bit 6 = AIS
bit 7 = TIM
bit 8 = SLM/PLM
bit 9 = SD
bit 10 = EXC
bit 12 = UNEQ
bit 15 = LOM

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.3.2.3.8.1.2

gnHptStatCurrentBer mandatory

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.8.1.3

gnHptStatFarEndCurrentBer mandatory

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.8.1.4

gnHptStatReceivedSignalLabel mandatory

This is the C2 string that was received.

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.2.3.8.1.5

gnHptMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.1 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the HPT part
of the MUX.

gnHptMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.9.1.1

This is an entry in the HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnHptMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.1`
gnHptMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.2`
gnHptMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.3`
gnHptMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.4`
gnHptMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.5`
gnHptMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.1.1.6`

gnHptMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.2 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the HPT part
of the MUX per interval.

gnHptMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.9.2.1

This is an entry in the HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, between 1
…

Indexes

RFC1213-MIBifIndex gnHptMonIntervalIdx

Column	Syntax	OID
gnHptMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.9.2.1.1`
gnHptMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.2.1.2`
gnHptMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.2.1.3`

gnHptMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.3 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the HPT part
of the MUX per 24 hours interval.

gnHptMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.9.3.1

Indexes

RFC1213-MIBifIndex gnHptMonDayIdx

Column	Syntax	OID
gnHptMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.9.3.1.1`
gnHptMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.3.1.2`
gnHptMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.3.1.3`
gnHptMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.3.1.4`
gnHptMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.3.1.5`

gnHptFarEndMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.4 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the far end HPT part
of the MUX.

gnHptFarEndMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.9.4.1

This is an entry in the far end HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnHptFarEndMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.1`
gnHptFarEndMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.2`
gnHptFarEndMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.3`
gnHptFarEndMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.4`
gnHptFarEndMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.5`
gnHptFarEndMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.4.1.6`

gnHptFarEndMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.5 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the far end HPT part
of the MUX per interval.

gnHptFarEndMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.9.5.1

This is an entry in the far end HPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is PATH(50, according to RFC1573).
This table is indexed by an interval index, be…

Indexes

RFC1213-MIBifIndex gnHptFarEndMonIntervalIdx

Column	Syntax	OID
gnHptFarEndMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.9.5.1.1`
gnHptFarEndMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.5.1.2`
gnHptFarEndMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.5.1.3`

gnHptFarEndMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.9.6 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the far end HPT part
of the MUX per 24 hours interval.

gnHptFarEndMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.9.6.1

Indexes

RFC1213-MIBifIndex gnHptFarEndMonDayIdx

Column	Syntax	OID
gnHptFarEndMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.9.6.1.1`
gnHptFarEndMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.6.1.2`
gnHptFarEndMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.6.1.3`
gnHptFarEndMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.6.1.4`
gnHptFarEndMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.9.6.1.5`

gnLptCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.10 · 1 row entry · 2 columns

Open in standard view

This table maintains the counters of the LPT part
of the MUX.

gnLptCfgEntry entry .1.3.6.1.4.1.2281.3.2.3.10.1

This is an entry in the LPT part of the MUX
Configuration Table. This table contains an interface index for every
interface which type is VT(51, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnLptCfgEXCThresh mandatory

If the bit error rate is higher than this threshold
an alarm would be generated.
EXC is for excessive.

Enumerationr/w

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5

.1.3.6.1.4.1.2281.3.2.3.10.1.1

gnLptCfgSDThresh mandatory

If the bit error rate is higher than this threshold
an alarm would be generated.
SD is for Signal Degrade.

Enumerationr/w

Enumerated Values:

3	tenExpMinus6
4	tenExpMinus7
5	tenExpMinus8
6	tenExpMinus9
15	notActive

.1.3.6.1.4.1.2281.3.2.3.10.1.2

gnLptStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.11 · 1 row entry · 7 columns

Open in standard view

This table defines the status of the LPT part
of the MUX.

gnLptStatEntry entry .1.3.6.1.4.1.2281.3.2.3.11.1

This is an entry in the LPT part of the MUX
Status Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnLptStatReceivedJ2 mandatory

This is the J2 string that was received.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.11.1.1

gnLptStatStatus mandatory

Alarm status byte. Bit 1 is MSB, bit=1 when alarm active.
bit 4 = LOP
bit 5 = RDI
bit 6 = AIS
bit 7 = TIM
bit 8 = SLM/PLM
bit 9 = SD
bit 10 = EXC
bit 12 = UNEQ

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.3.2.3.11.1.2

gnLptStatProtectionMode mandatory

Enumeration

Enumerated Values:

2	working
3	protect
4	passthrough
5	notActive

.1.3.6.1.4.1.2281.3.2.3.11.1.3

gnLptStatCurrentBer mandatory

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.11.1.4

gnLptStatFarEndCurrentBer mandatory

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.3.2.3.11.1.5

gnLptStatReceivedSignalLabel mandatory

These are bits 1..3 of the V5 string that was received
(bit 0 is the lsb).

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.2.3.11.1.6

gnLptStatKLM mandatory

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.3.2.3.11.1.7

gnLptMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.1 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the LPT part
of the MUX.

gnLptMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.12.1.1

This is an entry in the LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnLptMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.1`
gnLptMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.2`
gnLptMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.3`
gnLptMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.4`
gnLptMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.5`
gnLptMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.1.1.6`

gnLptMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.2 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the LPT part
of the MUX per interval.

gnLptMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.12.2.1

This is an entry in the LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).
This table is indexed by an interval index, between 1
to…

Indexes

RFC1213-MIBifIndex gnLptMonIntervalIdx

Column	Syntax	OID
gnLptMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.12.2.1.1`
gnLptMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.2.1.2`
gnLptMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.2.1.3`

gnLptMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.3 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the LPT part
of the MUX per 24 hours interval.

gnLptMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.12.3.1

This is an entry in the LPT part of the MUX
Counters Table. This table contains four groups of rows,
indexed by ifIndex= 1,2 for local IDU and
ifIndex = 101 and 102 for remote IDU.
This table is indexed by an interval i…

Indexes

RFC1213-MIBifIndex gnLptMonDayIdx

Column	Syntax	OID
gnLptMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.12.3.1.1`
gnLptMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.3.1.2`
gnLptMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.3.1.3`
gnLptMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.3.1.4`
gnLptMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.3.1.5`

gnLptFarEndMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.4 · 1 row entry · 6 columns

Open in standard view

This table maintains the counters of the far end LPT part
of the MUX.

gnLptFarEndMonCurrEntry entry .1.3.6.1.4.1.2281.3.2.3.12.4.1

This is an entry in the far end LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnLptFarEndMonCurrBBE mandatory The current number of Background Block Errors starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.1`
gnLptFarEndMonCurrUAS mandatory The current number of Unavailable Seconds starting from the present 15 minutes period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.2`
gnLptFarEndMonCurrLastDayES mandatory The current number of Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.3`
gnLptFarEndMonCurrLastDaySES mandatory The current number of Severely Errored Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.4`
gnLptFarEndMonCurrLastDayBBE mandatory The current number of Background Block Errors starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.5`
gnLptFarEndMonCurrLastDayUAS mandatory The current number of Unavailable Seconds starting from the present 24 hours period.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.4.1.6`

gnLptFarEndMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.5 · 1 row entry · 3 columns

Open in standard view

This table maintains the counters of the far end LPT part
of the MUX per interval.

gnLptFarEndMonIntervalEntry entry .1.3.6.1.4.1.2281.3.2.3.12.5.1

This is an entry in the far end LPT part of the MUX
Counters Table. This table contains an interface index for every interface
which type is VT(51, according to RFC1573).
This table is indexed by an interval index, betw…

Indexes

RFC1213-MIBifIndex gnLptFarEndMonIntervalIdx

Column	Syntax	OID
gnLptFarEndMonIntervalIdx mandatory This table is indexed per interval number. Each interval is of 15 minutes and the oldest is 96.	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.2281.3.2.3.12.5.1.1`
gnLptFarEndMonIntervalBBE mandatory The number of Background Block Errors per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.5.1.2`
gnLptFarEndMonIntervalUAS mandatory The number of Unavailable Seconds per interval.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.5.1.3`

gnLptFarEndMonDayTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.12.6 · 1 row entry · 5 columns

Open in standard view

This table maintains the counters of the far end LPT part
of the MUX per 24 hours interval.

gnLptFarEndMonDayEntry entry .1.3.6.1.4.1.2281.3.2.3.12.6.1

Indexes

RFC1213-MIBifIndex gnLptFarEndMonDayIdx

Column	Syntax	OID
gnLptFarEndMonDayIdx mandatory This table is indexed per interval number. Each interval is of 24 hours and the oldest is 30.	Integer32 Constraints: `range: 1-30`	`.1.3.6.1.4.1.2281.3.2.3.12.6.1.1`
gnLptFarEndMonDayES mandatory The number of Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.6.1.2`
gnLptFarEndMonDaySES mandatory The number of Severely Errored Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.6.1.3`
gnLptFarEndMonDayBBE mandatory The number of Background Block Errors per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.6.1.4`
gnLptFarEndMonDayUAS mandatory The number of Unavailable Seconds per interval of 24 hours.	RFC1155-SMIGauge Textual Convention: RFC1155-SMIGauge `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.3.2.3.12.6.1.5`

gnMuxCfgXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.13 · 1 row entry · 6 columns

Open in standard view

This table defines the configuration of the mux board.

gnMuxCfgXEntry entry .1.3.6.1.4.1.2281.3.2.3.13.1

This is an entry in the mux configuration table.

Indexes

gnMuxCfgXId

Column Syntax OID

gnMuxCfgXId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

3	mux1
4	mux2

.1.3.6.1.4.1.2281.3.2.3.13.1.1

gnMuxCfgXWsAdmin mandatory

Enable Disable drawer wayside channel

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.3.13.1.2

gnMuxCfgXWsLoopback mandatory

This parameter controls the WAYSIDE channel loopback diagnostic operations.

Enumerationr/w

Enumerated Values:

2	noloopback
3	waySideLoop

.1.3.6.1.4.1.2281.3.2.3.13.1.3

gnMuxCfgXHwReset mandatory

hwReset - Hardware reset for mux board.

Enumerationr/w

Enumerated Values:

2	noOperation
3	hwReset

.1.3.6.1.4.1.2281.3.2.3.13.1.4

gnMUXCfgXTempLicenseEnable mandatory

Set temporary license enable or disable

Enumerationr/w

Enumerated Values:

2	enable
3	disable
4	notSupported

.1.3.6.1.4.1.2281.3.2.3.13.1.5

gnMUXCfgXTempLicenseTimer mandatory

This value indicates the temporary license timer

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.2.3.13.1.6

gnMuxStatXTable

table mandatory

.1.3.6.1.4.1.2281.3.2.3.14 · 1 row entry · 11 columns

Open in standard view

This table defines the status of the mux board.

gnMuxStatXEntry entry .1.3.6.1.4.1.2281.3.2.3.14.1

This is an entry in the mux configuration table.

Indexes

gnMuxStatXId

Column Syntax OID

gnMuxStatXId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

3	mux1
4	mux2

.1.3.6.1.4.1.2281.3.2.3.14.1.1

gnMuxStatXMuxSerialNumber mandatory

This is the MUX serial number - up to 20 characters

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.2281.3.2.3.14.1.2

gnMuxStatXIfLeds mandatory

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.2281.3.2.3.14.1.3

gnMuxStatXNumOfIfOnClass1 mandatory

This value indicates the actual number of interfaces on class 1.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.2.3.14.1.4

gnMuxStatXNumOfIfOnClass2 mandatory

This value indicates the actual number of interfaces on class 2.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.2.3.14.1.5

gnMuxStatXNumOfIfOnClass3 mandatory

This value indicates the actual number of interfaces on class 3.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.2.3.14.1.6

gnMuxStatXAesAdmin mandatory

This parameter defines encryption admin mode.

Enumeration

Enumerated Values:

2	enable
3	disable
4	notSupport
5	systemFailure

.1.3.6.1.4.1.2281.3.2.3.14.1.7

gnMuxStatXMuxFWVer mandatory

This is the Mux firmware version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.14.1.8

gnMuxStatXMuxFWPostVer mandatory

This is the Mux post reset firmware version.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.3.14.1.9

gnMuxStatXBoardConnector mandatory

This parameter defines the connector of the mux board, for NMS use.

Enumeration

Enumerated Values:

2	noInterface
3	oneElectricalSTM1
4	oneFiberSTM1SingleMode
5	oneFiberSTM1MultiMode
6	twoElectricalSTM1
7	twoFiberSTM1SingleMode
8	twoFiberSTM1MultiMode
9	oneFEOnly
10	oneFEplus4E1
11	oneFEplus8E1
12	oneFEplus4T1
13	oneFEplus8T1
14	twoFEOnly
15	twoFEplus4E1
16	twoFEplus8E1
17	twoFEplus4T1
18	twoFEplus8T1
19	oneDS3
20	threeDS3
21	oneE3
22	threeE3
23	oneOpticalGBEOnly
24	oneOpticalGBEPlus8E1
25	oneOpticalGBEPlus8T1
26	oneElectricalGBEOnly
27	oneElectricalGBEPlus8E1
28	oneElectricalGBEPlus8T1
29	oneFEplus64E1
30	oneFEplus64T1
31	eightE1Only
32	eightT1Only
33	oneStm1XC
34	twoStm1XC

.1.3.6.1.4.1.2281.3.2.3.14.1.10

gnMuxStatXBoardType mandatory

This parameter defines the type of the mux.

Enumeration

Enumerated Values:

2	v1
3	v2
4	v3
5	v4
6	v5
7	v6

.1.3.6.1.4.1.2281.3.2.3.14.1.11

gnAuxGeneralTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.1.1 · 1 row entry · 2 columns

Open in standard view

This table defines the commands of the Auxiliary channel.

gnAuxGeneralEntry entry .1.3.6.1.4.1.2281.3.2.4.1.1.1

This is an entry in the Auxiliary channel command Table.

Indexes

gnAuxGeneralId

Column Syntax OID

gnAuxGeneralId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.1.1.1.1

gnAuxGeneralSyncIdcDataBase mandatory

This parameter synchronize between hardware and data base of auxiliary channel.

Enumerationr/w

Enumerated Values:

2	noOperation
3	auxToIdc
4	idcToAux

.1.3.6.1.4.1.2281.3.2.4.1.1.1.2

gnWscCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.2.1 · 1 row entry · 6 columns

Open in standard view

This table defines the configuration of the Wayside channel.

gnWscCfgEntry entry .1.3.6.1.4.1.2281.3.2.4.2.1.1

This is an entry in the Wayside channel part of the AUX Configuration Table.

Indexes

gnWscCfgId gnWscCfgChNumber

Column Syntax OID

gnWscCfgId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.2.1.1.1

gnWscCfgChNumber mandatory

Wayside channel number.

Enumeration

Enumerated Values:

1	channel1
2	channel2

.1.3.6.1.4.1.2281.3.2.4.2.1.1.2

gnWscCfgRouting mandatory

Wayside channel routing.

Enumerationr/w

Enumerated Values:

2	drawer1
3	drawer2

.1.3.6.1.4.1.2281.3.2.4.2.1.1.3

gnWscCfgEnable mandatory

Wayside channel enable\disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.4.2.1.1.4

gnWscCfgBitRate mandatory

Wayside channel bit rate.

Enumerationr/w

Enumerated Values:

2	low
3	high

.1.3.6.1.4.1.2281.3.2.4.2.1.1.5

gnWscCfgType mandatory

Wayside channel bit rate.

Enumerationr/w

Enumerated Values:

2	e1
3	t1
4	fastEthernet

.1.3.6.1.4.1.2281.3.2.4.2.1.1.6

gnWscStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.2.2 · 1 row entry · 3 columns

Open in standard view

This table defines the status of the Wayside channel.

gnWscStatEntry entry .1.3.6.1.4.1.2281.3.2.4.2.2.1

This is an entry in the Wayside channel part of the AUX Status Table.

Indexes

gnWscStatId gnWscStatChNumber

Column Syntax OID

gnWscStatId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.2.2.1.1

gnWscStatChNumber mandatory

Wayside channel number.

Enumeration

Enumerated Values:

1	channel1
2	channel2

.1.3.6.1.4.1.2281.3.2.4.2.2.1.2

gnWscStatBitRateSupport mandatory

Indication for Wayside channel bit rate support.

Enumeration

Enumerated Values:

2	supported
3	notSupported

.1.3.6.1.4.1.2281.3.2.4.2.2.1.3

gnEowCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.3.1 · 1 row entry · 4 columns

Open in standard view

This table defines the configuration of the EOW.

gnEowCfgEntry entry .1.3.6.1.4.1.2281.3.2.4.3.1.1

This is an entry in the EOW configuration Table.

Indexes

gnEowCfgId

Column Syntax OID

gnEowCfgId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.3.1.1.1

gnEowCfgEowLeftEnable mandatory

EOW enable\disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.4.3.1.1.2

gnEowCfgEowRightEnable mandatory

EOW enable\disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.4.3.1.1.3

gnEowCfgEowCascadeEnable mandatory

EOW cascade enable\disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.4.3.1.1.4

gnEowStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.3.2 · 1 row entry · 3 columns

Open in standard view

This table defines the status of the EOW.

gnEowStatEntry entry .1.3.6.1.4.1.2281.3.2.4.3.2.1

This is an entry in the EOW status Table.

Indexes

gnEowStatId

Column Syntax OID

gnEowStatId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.3.2.1.1

gnEowStatEowLeftSupport mandatory

Indication for EOW support.

Enumeration

Enumerated Values:

2	supported
3	notSupported

.1.3.6.1.4.1.2281.3.2.4.3.2.1.2

gnEowStatEowRightSupport mandatory

Indication for EOW support.

Enumeration

Enumerated Values:

2	supported
3	notSupported

.1.3.6.1.4.1.2281.3.2.4.3.2.1.3

gnUcCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.4.1 · 1 row entry · 6 columns

Open in standard view

This table defines the configuration of the User channel.

gnUcCfgEntry entry .1.3.6.1.4.1.2281.3.2.4.4.1.1

This is an entry in the User channel part of the AUX Configuration Table.

Indexes

gnUcCfgId gnUcCfgChNumber

Column Syntax OID

gnUcCfgId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.4.1.1.1

gnUcCfgChNumber mandatory

User channel number.

Enumeration

Enumerated Values:

1	channel1
2	channel2

.1.3.6.1.4.1.2281.3.2.4.4.1.1.2

gnUcCfgRouting mandatory

User channel routing.

Enumerationr/w

Enumerated Values:

2	drawer1
3	drawer2

.1.3.6.1.4.1.2281.3.2.4.4.1.1.3

gnUcCfgEnable mandatory

User channel enable\disable.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.2.4.4.1.1.4

gnUcCfgType mandatory

User channel protocol type.

Enumerationr/w

Enumerated Values:

2	v11Asyn
3	rs232
4	v11SynCoDirectional
5	v11SynContraDirectional
6	ethernet

.1.3.6.1.4.1.2281.3.2.4.4.1.1.5

gnUcCfgLoopback mandatory

User channel loopback activation.

Enumerationr/w

Enumerated Values:

2	none
3	line

.1.3.6.1.4.1.2281.3.2.4.4.1.1.6

gnUcStatTable

table mandatory

.1.3.6.1.4.1.2281.3.2.4.4.2 · 1 row entry · 3 columns

Open in standard view

This table defines the status of the user channel.

gnUcStatEntry entry .1.3.6.1.4.1.2281.3.2.4.4.2.1

This is an entry in the user channel status Table.

Indexes

gnUcStatId

Column Syntax OID

gnUcStatId mandatory

Enumeration

Enumerated Values:

local

.1.3.6.1.4.1.2281.3.2.4.4.2.1.1

gnUcStatLeftMaxRouteChannel mandatory

Indication for NMS on the number of
channels the right radio can passthrough.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.4.4.2.1.2

gnUcStatRightMaxRouteChannel mandatory

Indication for NMS on the number of
channels the right radio can passthrough.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.2.4.4.2.1.3

gnProtectCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.3.1 · 1 row entry · 10 columns

Open in standard view

This table contains protection switch configuration
per device; local and remote.

gnProtectCfgEntry entry .1.3.6.1.4.1.2281.3.3.1.1

Indexes

gnProtectCfgId

Column Syntax OID

gnProtectCfgId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

1	local
2	remote

.1.3.6.1.4.1.2281.3.3.1.1.1

gnProtectCfgSwitchRequest mandatory

Protection user switch request.

Enumerationr/w

Enumerated Values:

2	noAction
3	userSwitchRequest
4	userForceSwitch

.1.3.6.1.4.1.2281.3.3.1.1.2

gnProtectCfgBERSwitch mandatory

Enable or disable automatic switch as a result of BER condition.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.1.1.3

gnProtectCfgExtInSwitch mandatory

Enable or disable automatic switch as a result of alarm
on External Input No. 8.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.1.1.4

gnProtectCfgOption mandatory

bit 8 (lsb) = dual fiber input.
bit 7 = protection disable
bit 4 = 0 (default) for External protection ; 1 for Internal protection (between the drawers)
bit 3 = 0 (default) for Full protection ; 1 for Radio pr…

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.3.3.1.1.5

gnProtectCfgUserCommand mandatory

Copy All the configuration that should be equal in master and slave.
The copy is made from the current unit to it's mate/Left drawer to right drawer or right drawer to left drawer.

Enumerationr/w

Enumerated Values:

2	noAction
3	copyConfToMate
4	copyLeftConfToRight
5	copyRightConfToLeft

.1.3.6.1.4.1.2281.3.3.1.1.6

gnProtectCfgType mandatory

Enumerationr/w

Enumerated Values:

2	none
3	internal
4	external
5	externalInternal
6	multiRadioWithoutLineProtection
7	multiRadioWithLineProtection

.1.3.6.1.4.1.2281.3.3.1.1.7

gnProtectCfgProtectionLockout mandatory

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.3.3.1.1.8

gnProtectCfgSdBERSwitch mandatory

Enable or disable automatic switch as a result of signal degrade BER condition.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.1.1.9

gnProtectCfgMultiRadioBlock mandatory

Block\un block radio in multi radio protection configuration only.

Enumerationr/w

Enumerated Values:

2	unblock
3	blockLeft
4	blockRight
5	blockBoth

.1.3.6.1.4.1.2281.3.3.1.1.10

gnHitLessCfgTable

table mandatory

.1.3.6.1.4.1.2281.3.3.3 · 1 row entry · 8 columns

Open in standard view

This table contains hitless configuration
per device; local and remote.

gnHitLessCfgEntry entry .1.3.6.1.4.1.2281.3.3.3.1

Indexes

gnHitLessCfgId

Column Syntax OID

gnHitLessCfgId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

1	local
2	remote
3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.3.3.1.1

gnHitLessCfgSwitchEnable mandatory

Enable or disable the Hitless feature.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.3.1.2

gnHitLessCfgDiversityType mandatory

Is the hitless feature working in space diversity mode
or in frequency diversity mode.

Enumerationr/w

Enumerated Values:

2	space
3	frequency
4	none

.1.3.6.1.4.1.2281.3.3.3.1.3

gnHitLessCfgSwitchingMode mandatory

Enumerationr/w

Enumerated Values:

2	revertive
3	nonRevertive

.1.3.6.1.4.1.2281.3.3.3.1.4

gnHitLessCfgRevertTime mandatory

This parameter indicates the revert time in seconds.
Possible values: 0..15.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.3.1.5

gnHitLessCfgManualSwitch mandatory

Force manually switch between the hitless modems.

Enumerationr/w

Enumerated Values:

2	noAction
3	activate

.1.3.6.1.4.1.2281.3.3.3.1.6

gnHitLessCfgEventCounterCommand mandatory

Clears the gnHitLessStatEventCounter.

Enumerationr/w

Enumerated Values:

2	noAction
3	clearCounter

.1.3.6.1.4.1.2281.3.3.3.1.7

gnHitLessCfgSwitchLock mandatory

Enumerationr/w

Enumerated Values:

2	off
3	left
4	right
5	self
6	mate

.1.3.6.1.4.1.2281.3.3.3.1.8

gnHitLessStatTable

table mandatory

.1.3.6.1.4.1.2281.3.3.4 · 1 row entry · 5 columns

Open in standard view

This table contains hitless status
per device; local and remote.

gnHitLessStatEntry entry .1.3.6.1.4.1.2281.3.3.4.1

Indexes

gnHitLessStatId

Column Syntax OID

gnHitLessStatId mandatory

This value indicates which device is involved
in the specific row.

Enumeration

Enumerated Values:

1	local
2	remote
3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.3.4.1.1

gnHitLessStatReceiverStatus mandatory

This parameter indicates which Modem is active:
the Local or the mate.

Enumeration

Enumerated Values:

2	local
3	mate
4	leftRadio
5	rightRadio

.1.3.6.1.4.1.2281.3.3.4.1.2

gnHitLessStatModeStatus mandatory

This parameter indicates if the Hitless system
is working properly.

Enumeration

Enumerated Values:

2	hitlessOK
3	hitlessFailure

.1.3.6.1.4.1.2281.3.3.4.1.3

gnHitLessStatEventCounter mandatory

This counter counts the number of hitless switch events.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2281.3.3.4.1.4

gnHitLessStatAlarmStatus mandatory

bit 1 represent the MSB
bits 1-7 are not in use
bit 8 : Switch lock to right.
bit 9 : Switch lock to left.
bit 10: Protection config mismatch.
bit 11: Diversity config mismatch.
bit 12: Unused radio LOF.…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.3.3.4.1.5

gnProtectXTable

table mandatory

.1.3.6.1.4.1.2281.3.3.7 · 1 row entry · 3 columns

Open in standard view

gnProtectXEntry entry .1.3.6.1.4.1.2281.3.3.7.1

Indexes

gnProtectXId

Column Syntax OID

gnProtectXId mandatory

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.3.7.1.1

gnProtectXProtectUnitMode mandatory

This parameter indicates the unit mode: Master of Slave.

Enumeration

Enumerated Values:

2	slave
3	master

.1.3.6.1.4.1.2281.3.3.7.1.2

gnProtectXMultiRadioOhRadioSource mandatory

This parameter indicates the radio source of the OH in multi radio configuration merely.

Enumeration

Enumerated Values:

3	drawer1
4	drawer2

.1.3.6.1.4.1.2281.3.3.7.1.3

topologiesOptionsTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.1 · 1 row entry · 4 columns

Open in standard view

This table indicates the Topologies options.

topologiesOptionsEntry entry .1.3.6.1.4.1.2281.3.3.8.1.1

Entry containing the Topologies options.

Indexes

topologiesOptionsGroupTopology

Column	Syntax	OID
topologiesOptionsGroupTopology mandatory This value indicates a bitmap : ---------------------------------------- \| 15..12 \| 11...........8 \| 7........0 \| \| Set Id \| Group Topology \| Group Size \| ---------------------------------------	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.3.8.1.1.1`
topologiesOptionsMembersCarriers mandatory This value indicates a bitmap, LSB = carrier #1, #2.....	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.3.8.1.1.2`
topologiesOptionsProtectingCarriers mandatory This value indicates a bitmap, LSB = carrier #1, #2.....	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.2281.3.3.8.1.1.3`
topologiesOptionsName mandatory This value indicates the name of the topology, HSB 1:1, Stand Alone, 2+1....	OctetString Constraints: `range: 0-20`	`.1.3.6.1.4.1.2281.3.3.8.1.1.4`

linkGroupingTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.2 · 1 row entry · 5 columns

Open in standard view

This table indicates the link grouping.

linkGroupingEntry entry .1.3.6.1.4.1.2281.3.3.8.2.1

Entry containing the link grouping.

Indexes

linkGroupingGroupId

Column Syntax OID

linkGroupingGroupId mandatory

This value indicates the group id

Integer32r/w

Constraints:
range: 1-4

.1.3.6.1.4.1.2281.3.3.8.2.1.1

linkGroupingGroupAdmin mandatory

This value indicates the groups admin

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.8.2.1.2

linkGroupingGroupTopology mandatory

This value indicates a bitmap :
----------------------------------------
| 15..12 | 11...........8 | 7........0 |
| Set Id | Group Topology | Group Size |
---------------------------------------

Enumerationr/w

Enumerated Values:

1	topologyhsb1-1
256	topologystandalone
513	topology1plus1
514	topology2plus1
515	topology3plus1
516	topology4plus1
517	topology5plus1
518	topology6plus1
519	topology7plus1
520	topology8plus1
521	topology9plus1

.1.3.6.1.4.1.2281.3.3.8.2.1.3

linkGroupingExtraTrafficAdmin mandatory

This value indicates the ET admin

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.8.2.1.4

linkGroupingGroupName mandatory

This value indicates the groups name.

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.2281.3.3.8.2.1.5

protectionTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.3 · 1 row entry · 4 columns

Open in standard view

This table indicates the link grouping protection.

protectionEntry entry .1.3.6.1.4.1.2281.3.3.8.3.1

Entry containing the link grouping protection.

Indexes

protectionGroupId

Column Syntax OID

protectionGroupId mandatory

This value indicates the group id.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2281.3.3.8.3.1.1

protectionGroupsProtectionAdmin mandatory

This value indicates the groups protection admin.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.8.3.1.2

protectionNplus1ProtectionMethod mandatory

This value indicates the N+1 protection method.

Enumerationr/w

Enumerated Values:

2	standard
3	advanced

.1.3.6.1.4.1.2281.3.3.8.3.1.3

protectionProtectingCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.8.3.1.4

standardProtectionTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.4 · 1 row entry · 5 columns

Open in standard view

This table indicates the link grouping standard protection.

standardProtectionEntry entry .1.3.6.1.4.1.2281.3.3.8.4.1

Entry containing the link grouping standard protection.

Indexes

standardProtectionGroupId

Column Syntax OID

standardProtectionGroupId mandatory

This value indicates the group id.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2281.3.3.8.4.1.1

standardProtectionSwitchOnEarlyWarning mandatory

This value indicates switch on early warning.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.3.3.8.4.1.2

standardProtectionHighPrioProtectionTh mandatory

This value indicates the high priority protection.

Enumerationr/w

Enumerated Values:

4	bblof
5	bbexb
6	bbsd
7	ew

.1.3.6.1.4.1.2281.3.3.8.4.1.3

standardProtectionRevertiveLink mandatory

This value indicates the revertive link.

Enumerationr/w

Enumerated Values:

1	carrier1
2	carrier2
3	carrier3
4	carrier4
5	carrier5
6	carrier6
7	carrier7
8	carrier8
9	carrier9
10	carrier10
11	carrier11
12	carrier12
13	carrier13
14	carrier14
15	carrier15
256	extraTraffic
257	none

.1.3.6.1.4.1.2281.3.3.8.4.1.4

standardProtectionRevertiveSwitchTimeOut mandatory

This value indicates the revertive switch time out.

Integer32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.4.1.5

membersTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.5 · 1 row entry · 3 columns

Open in standard view

This table indicates the link groups members.

membersEntry entry .1.3.6.1.4.1.2281.3.3.8.5.1

Entry containing the link groups members.

Indexes

membersGroupId membersCarrierId

Column Syntax OID

membersGroupId mandatory

This value indicates the group id.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2281.3.3.8.5.1.1

membersCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.5.1.2

membersProtectionPriorityLevel mandatory

This value indicates the protection priority level.

Enumerationr/w

Enumerated Values:

2	void
3	normal
4	high

.1.3.6.1.4.1.2281.3.3.8.5.1.3

nplus1ProtectingTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.6 · 1 row entry · 7 columns

Open in standard view

This table indicates the link group N+1 protecting.

nplus1ProtectingEntry entry .1.3.6.1.4.1.2281.3.3.8.6.1

Entry containing the link group N+1 protecting.

Indexes

nplus1ProtectingGroupId

Column Syntax OID

nplus1ProtectingGroupId mandatory

This value indicates the group id.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.2281.3.3.8.6.1.1

nplus1ProtectingXCProtectionFraming mandatory

This value indicates the XC protecting framing.

Enumeration

Enumerated Values:

2	na
3	lof
4	noPeer
5	clear

.1.3.6.1.4.1.2281.3.3.8.6.1.2

nplus1ProtectingProtectedLinkTx mandatory

This value indicates the last known carrier num. 0 means no carrier.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.8.6.1.3

nplus1ProtectingProtectedLinkRx mandatory

This value indicates the last known carrier num. 0 means no carrier.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.8.6.1.4

nplus1ProtectingRequestedLinkTx mandatory

This value indicates the last known carrier num. 0 means no carrier.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.8.6.1.5

nplus1ProtectingRequestedLinkRx mandatory

This value indicates the last known carrier num. 0 means no carrier.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.3.3.8.6.1.6

nplus1ProtectingSwitchToProtectingCommand mandatory

This value indicates the switch to protecting command.
The force switch command is Bi-directional.

Enumerationr/w

Enumerated Values:

256	noaction
512	lockout
769	force1
770	force2
771	force3
772	force4
773	force5
774	force6
775	force7
776	force8
777	force9
778	force10
779	force11
780	force12
781	force13
782	force14
783	force15
1025	request1
1026	request2
1027	request3
1028	request4
1029	request5
1030	request6
1031	request7
1032	request8
1033	request9
1034	request10
1035	request11
1036	request12
1037	request13
1038	request14
1039	request15

.1.3.6.1.4.1.2281.3.3.8.6.1.7

carrierProtectionTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.7 · 1 row entry · 8 columns

Open in standard view

This table indicates the carrier protection.

carrierProtectionEntry entry .1.3.6.1.4.1.2281.3.3.8.7.1

Entry containing the carrier protection.

Indexes

carrierProtectionXCId carrierProtectionCarrierId

Column Syntax OID

carrierProtectionXCId mandatory

This value indicates the XC id.

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.2281.3.3.8.7.1.1

carrierProtectionCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.7.1.2

carrierProtectionLinkGroupNum mandatory

This value indicates the link group number.

Enumeration

Enumerated Values:

2	standalone
3	group1
4	group2
5	group3
6	group4

.1.3.6.1.4.1.2281.3.3.8.7.1.3

carrierProtectionServedByRemoteXC mandatory

This value indicates whether served by remote XC.

Enumeration

Enumerated Values:

2	na
3	yes
4	no

.1.3.6.1.4.1.2281.3.3.8.7.1.4

carrierProtectionRadioStatus mandatory

This value indicates the radio status.

Enumeration

Enumerated Values:

2	na
3	off
4	bblof
5	bbexb
6	bbsd
7	ew
8	clear

.1.3.6.1.4.1.2281.3.3.8.7.1.5

carrierProtectionLineFraming mandatory

This value indicates the line framing.

Enumeration

Enumerated Values:

2	na
3	lof
4	clear

.1.3.6.1.4.1.2281.3.3.8.7.1.6

carrierProtectionLoopback mandatory

This value indicates the loopback.

Enumerationr/w

Enumerated Values:

3	none
4	external

.1.3.6.1.4.1.2281.3.3.8.7.1.7

carrierProtectionLoopbackTimer mandatory

This variable indicates the remaining time (in minutes) till the loopback timer will be expired.

Integer32

Constraints:
range: 0-1440

.1.3.6.1.4.1.2281.3.3.8.7.1.8

nplus1StandardPMCurrTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.8 · 1 row entry · 13 columns

Open in standard view

This table indicates the standard PM current.

nplus1StandardPMCurrEntry entry .1.3.6.1.4.1.2281.3.3.8.8.1

Entry containing the standard PM current.

Indexes

nplus1StandardPMCurrCarrierId

Column Syntax OID

nplus1StandardPMCurrCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.8.1.1

nplus1StandardPMCurrTimeElapsed mandatory

This value indicates the time that elapsed.

Integer32

Constraints:
range: 1-900

.1.3.6.1.4.1.2281.3.3.8.8.1.2

nplus1StandardPMCurrValidIntervals mandatory

This value indicates the valid intervals.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.3.8.8.1.3

nplus1StandardPMCurrLastDayIDF mandatory

This value indicates the carrier id.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.3.8.8.1.4

nplus1StandardPMCurrLastDayGroupNum mandatory

This value indicates the group's number.

Integer32

Constraints:
range: -1-4

.1.3.6.1.4.1.2281.3.3.8.8.1.5

nplus1StandardPMCurrPSAC mandatory

This value indicates the PSAC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.6

nplus1StandardPMCurrFSRC mandatory

This value indicates the FSRC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.7

nplus1StandardPMCurrPSAD mandatory

This value indicates the PSAD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.8

nplus1StandardPMCurrFSRD mandatory

This value indicates the FSRD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.9

nplus1StandardPMCurrLastDayPSAC mandatory

This value indicates the last Day PSAC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.10

nplus1StandardPMCurrLastDayFSRC mandatory

This value indicates the last Day FSRC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.11

nplus1StandardPMCurrLastDayPSAD mandatory

This value indicates the last Day PSAD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.12

nplus1StandardPMCurrLastDayFSRD mandatory

This value indicates the last Day FSRD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.8.1.13

nplus1StandardPMIntervalTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.9 · 1 row entry · 8 columns

Open in standard view

This table indicates the standard PM interval.

nplus1StandardPMIntervalEntry entry .1.3.6.1.4.1.2281.3.3.8.9.1

Entry containing the standard PM interval.

Indexes

nplus1StandardPMIntervalCarrierId nplus1StandardPMIntervalIdx

Column Syntax OID

nplus1StandardPMIntervalCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.9.1.1

nplus1StandardPMIntervalIdx mandatory

This value indicates the index.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.3.3.8.9.1.2

nplus1StandardPMIntervalIDF mandatory

This value is an invalid data flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.3.8.9.1.3

nplus1StandardPMIntervalGroupNum mandatory

This value indicates the group's number.

Integer32

Constraints:
range: -1-4

.1.3.6.1.4.1.2281.3.3.8.9.1.4

nplus1StandardPMIntervalPSAC mandatory

This value indicates the PSAC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.9.1.5

nplus1StandardPMIntervalFSRC mandatory

This value indicates the FSRC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.9.1.6

nplus1StandardPMIntervalPSAD mandatory

This value indicates the PSAD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.9.1.7

nplus1StandardPMIntervalFSRD mandatory

This value indicates the FSRD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.9.1.8

nplus1StandardPMDayTable

table mandatory

.1.3.6.1.4.1.2281.3.3.8.10 · 1 row entry · 8 columns

Open in standard view

This table indicates the standard PM day table.

nplus1StandardPMDayEntry entry .1.3.6.1.4.1.2281.3.3.8.10.1

Entry containing the standard PM day table.

Indexes

nplus1StandardPMDayCarrierId nplus1StandardPMDayIdx

Column Syntax OID

nplus1StandardPMDayCarrierId mandatory

This value indicates the carrier id.

Integer32

Constraints:
range: 1-15

.1.3.6.1.4.1.2281.3.3.8.10.1.1

nplus1StandardPMDayIdx mandatory

This value indicates the index.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.3.3.8.10.1.2

nplus1StandardPMDayIDF mandatory

This value is an invalid data flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.3.3.8.10.1.3

nplus1StandardPMDayGroupNum mandatory

This value indicates the group's number.

Integer32

Constraints:
range: -1-4

.1.3.6.1.4.1.2281.3.3.8.10.1.4

nplus1StandardPMDayPSAC mandatory

This value indicates the PSAC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.10.1.5

nplus1StandardPMDayFSRC mandatory

This value indicates the FSRC value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.10.1.6

nplus1StandardPMDayPSAD mandatory

This value indicates the PSAD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.10.1.7

nplus1StandardPMDayFSRD mandatory

This value indicates the FSRD value.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.3.3.8.10.1.8

gnAccessCfgTable

table mandatory

.1.3.6.1.4.1.2281.4.1.1 · 1 row entry · 7 columns

Open in standard view

This table defines the configuration and status of the access ports.

gnAccessCfgEntry entry .1.3.6.1.4.1.2281.4.1.1.1

Entry for the table containing an interface index for every interface
which type is DS3 (30, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnAccessCfgLongCableOption mandatory

This parameter defines the line build-out option.
Possible values:
For DS3: ds3ShortCable, ds3LongCable.
For T1: t1From0to133ft..t1From533to655ft.
For E1/E3: anyLength.
For T1 in 640 systems: t1FA640From0to110ft..t1FA6…

Enumerationr/w

Enumerated Values:

2	ds3ShortCable
3	ds3LongCable
4	t1From0to133ft
5	t1From133to266ft
6	t1From266to399ft
7	t1From399to533ft
8	t1From533to655ft
9	anyLength
10	t1FA640From0to110ft
11	t1FA640From110to220ft
12	t1FA640From220to330ft
13	t1FA640From330to440ft
14	t1FA640From440to550ft

.1.3.6.1.4.1.2281.4.1.1.1.1

gnAccessCfgLoopbackOption mandatory

This parameter enable the user to launch a loopback.

Enumerationr/w

Enumerated Values:

2	noloopback
3	interfaceInterLoop
4	interfaceExterLoop

.1.3.6.1.4.1.2281.4.1.1.1.2

gnAccessCfgRunPrbs mandatory

This parameter enables launching a PRBS test.

Enumerationr/w

Enumerated Values:

2	noOperation
3	lineOnRadioOnRcvLine
4	lineOnRadioOnRcvRadio
5	lineOnRadioOffRcvLine
6	lineOnRadioOffRcvRadio
7	lineOffRadioOnRcvLine
8	lineOffRadioOnRcvRadio
9	lineOffRadioOffRcvLine
10	lineOffRadioOffRcvRadio
11	lineOnRadioOnRcvOff
12	lineOffRadioOnRcvOff
13	lineOnRadioOffRcvOff

.1.3.6.1.4.1.2281.4.1.1.1.3

gnAccessCfgEXCThresh mandatory

If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive.

Enumerationr/w

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5

.1.3.6.1.4.1.2281.4.1.1.1.4

gnAccessCfgSDThresh mandatory

If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade.

Enumerationr/w

Enumerated Values:

3	tenExpMinus6
4	tenExpMinus7
5	tenExpMinus8
6	tenExpMinus9

.1.3.6.1.4.1.2281.4.1.1.1.5

gnAccessCfgTest mandatory

This parameter controls the action to send AIS or not.

Enumerationr/w

Enumerated Values:

2	noAction
3	sendAIS

.1.3.6.1.4.1.2281.4.1.1.1.6

gnAccessCfgLineCoding mandatory

The line coding possible values:
For T1: B7ZS(ami), B8ZS.
For E1 & E3: HDB3.
For DS3: B3ZS

Enumerationr/w

Enumerated Values:

2	ami
3	b8zs
4	hdb3
5	b3zs

.1.3.6.1.4.1.2281.4.1.1.1.7

gnAccessStatTable

table mandatory

.1.3.6.1.4.1.2281.4.2.1 · 1 row entry · 4 columns

Open in standard view

This table defines the status of the access ports.

gnAccessStatEntry entry .1.3.6.1.4.1.2281.4.2.1.1

Entry for the table containing an interface index for every interface
which type is DS3 (30, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnAccessStatInterfaceBer mandatory

Current Bit Error Rate.

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.4.2.1.1.1

gnAccessStatStatus mandatory

Alarm status of an ACCESS radio. Bit 1 is MSB, bit=1 when alarm active.
bit 2 = LOS
bit 6 = AIS
bit 9 = SD
bit 10 = EXC
bit 11 = Unexpected signal -- when disabled, will rise if detect data.
bit 14 = Out Of Lock

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.2281.4.2.1.1.2

gnAccessStatPrbsBer mandatory

Current PRBS Errors of the operation set
in the mib variable gnAccessCfgRunPrbs,
use this variable to clear the error counter.

Enumeration

Enumerated Values:

2	tenExpMinus3
3	tenExpMinus4
4	tenExpMinus5
5	tenExpMinus6
6	tenExpMinus7
7	tenExpMinus8
8	tenExpMinus9
9	tenExpMinus10
10	tenExpMinus11
11	tenExpMinus12
12	tenExpMinus13
13	tenExpMinus14

.1.3.6.1.4.1.2281.4.2.1.1.3

gnAccessStatValidIntervals mandatory

The number of previous valid intervals for which valid data has been stored
for the specific interface.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2281.4.2.1.1.4

gnFastEthernetCfgTable

table mandatory

.1.3.6.1.4.1.2281.4.3.1 · 1 row entry · 6 columns

Open in standard view

This table defines the configuration of the Fast Ethernet ports.

gnFastEthernetCfgEntry entry .1.3.6.1.4.1.2281.4.3.1.1

This is an entry in the Fast Ethernet configuration table.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnFastEthernetCfgAutoNegotiation mandatory

This parameter defines if auto negotiations protocol is active.

Enumerationr/w

Enumerated Values:

2	on
3	off

.1.3.6.1.4.1.2281.4.3.1.1.1

gnFastEthernetCfgForceSpeed mandatory

This parameter force speed when auto negotiation is off.

Enumerationr/w

Enumerated Values:

2	tenBased
3	hundredBased

.1.3.6.1.4.1.2281.4.3.1.1.2

gnFastEthernetCfgDynamicBand mandatory

Dynamic bandwidth allocation:
dynamic means that the two Fast Ethernet ports have the same priority.
LeftPreferred indicates that left Fast Ethernet card priority is higher.

Enumerationr/w

Enumerated Values:

2	notActive
3	dynamic
4	leftPreferred
5	vlanPriority
6	ipPriority

.1.3.6.1.4.1.2281.4.3.1.1.3

gnFastEthernetCfgGigabitEthernet mandatory

Gigabit Ethernet option.
This parameter will be changed after reset.

Enumerationr/w

Enumerated Values:

2	disable
3	enable

.1.3.6.1.4.1.2281.4.3.1.1.4

gnFastEthernetCfgDuplexMode mandatory

This parameter force duplex mode when auto negotiation is off.

Enumerationr/w

Enumerated Values:

2	halfDuplex
3	fullDuplex

.1.3.6.1.4.1.2281.4.3.1.1.5

gnFastEthernetCfgQueuingScheme mandatory

This parameter set the Queuing algorithm.

Enumerationr/w

Enumerated Values:

2	fixedPriority
3	weightedFair

.1.3.6.1.4.1.2281.4.3.1.1.6

gnFastEthernetStatTable

table mandatory

.1.3.6.1.4.1.2281.4.4.1 · 1 row entry · 1 columns

Open in standard view

The Fast Ethernet status table.

gnFastEthernetStatEntry entry .1.3.6.1.4.1.2281.4.4.1.1

This is an entry in the Fast Ethernet status table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnFastEthernetStatStatus mandatory Alarm status of an FE radio. Bit 1 is MSB, bit=1 when alarm active. bit 2 = Loss of Carrier	OctetString Constraints: `range: 2-2`	`.1.3.6.1.4.1.2281.4.4.1.1.1`

gnPdhMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.4.5.1 · 1 row entry · 11 columns

Open in standard view

This table maintains the counters for the PDH table.

gnPdhMonCurrEntry entry .1.3.6.1.4.1.2281.4.5.1.1

This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is DS3(30, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnPdhMonCurrES mandatory

The current number of errored seconds starting from the present 15 minute
period. .

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.1

gnPdhMonCurrSES mandatory

The current number of severely errored seconds, starting from the present
15 minute period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.2

gnPdhMonCurrBBE mandatory

The current number of Background Block Errors
starting from the present 15 minutes period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.3

gnPdhMonCurrUAS mandatory

The current number of Unavailable Seconds
starting from the present 15 minutes period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.4

gnPdhMonCurrCV mandatory

The current number of CV
starting from the present 15 minutes period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.5

gnPdhMonCurrLastDayES mandatory

The current number of Errored Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.6

gnPdhMonCurrLastDaySES mandatory

The current number of Severely Errored Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.7

gnPdhMonCurrLastDayBBE mandatory

The current number of Background Block Errors
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.8

gnPdhMonCurrLastDayUAS mandatory

The current number of Unavailable Seconds
starting from the present 24 hours period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.9

gnPdhMonCurrLastDayCV mandatory

The current number of CV, starting from the present 24-hour period.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.1.1.10

gnPdhMonCurrLastDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.5.1.1.11

gnPdhMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.4.5.2 · 1 row entry · 7 columns

Open in standard view

This table maintains the counters of the PDH per interval.

gnPdhMonIntervalEntry entry .1.3.6.1.4.1.2281.4.5.2.1

This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is DS3(30, according to RFC1573).
This table is indexed by an interval index, between 1
to 96 and represe…

Indexes

RFC1213-MIBifIndex gnPdhMonIntervalIdx

Column Syntax OID

gnPdhMonIntervalIdx mandatory

This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96.

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.2281.4.5.2.1.1

gnPdhMonIntervalES mandatory

The number of errored seconds per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.2.1.2

gnPdhMonIntervalSES mandatory

The number of severely errored seconds per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.2.1.3

gnPdhMonIntervalBBE mandatory

The number of Background Block Errors
per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.2.1.4

gnPdhMonIntervalUAS mandatory

The number of Unavailable Seconds per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.2.1.5

gnPdhMonIntervalCV mandatory

The number of CV per interval.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.2.1.6

gnPdhMonIntervalIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.5.2.1.7

gnPdhMonDayTable

table mandatory

.1.3.6.1.4.1.2281.4.5.3 · 1 row entry · 7 columns

Open in standard view

This table maintains the counters of the PDH per 24 hours interval.

gnPdhMonDayEntry entry .1.3.6.1.4.1.2281.4.5.3.1

Indexes

RFC1213-MIBifIndex gnPdhMonDayIdx

Column Syntax OID

gnPdhMonDayIdx mandatory

This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.4.5.3.1.1

gnPdhMonDayES mandatory

The number of Errored Seconds per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.3.1.2

gnPdhMonDaySES mandatory

The number of Severely Errored Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.3.1.3

gnPdhMonDayBBE mandatory

The number of Background Block Errors
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.3.1.4

gnPdhMonDayUAS mandatory

The number of Unavailable Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.3.1.5

gnPdhMonDayCV mandatory

The number of Code Violation Seconds
per interval of 24 hours.

RFC1155-SMIGauge

Textual Convention: RFC1155-SMIGauge Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2281.4.5.3.1.6

gnPdhMonDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.5.3.1.7

gnFastEthernetMonPrivateTable

table mandatory

.1.3.6.1.4.1.2281.4.6.1 · 1 row entry · 3 columns

Open in standard view

The Fast Ethernet Private Statistics Table.

gnFastEthernetMonPrivateEntry entry .1.3.6.1.4.1.2281.4.6.1.1

This is an entry in the Fast Ethernet private statistics table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnFastEthernetMonPrivateAlignmentErrors mandatory The number of received packets with an alignment error (Received frame length is not a multiple of 8 bits, and an FCS error had occurred).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.1.1.1`
gnFastEthernetMonPrivateFcsErrors mandatory Total number of received packets with a frame check sequence (FCS) or Cycle Redundancy Check (CRC) error.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.1.1.2`
gnFastEthernetMonPrivateFrameTooLongs mandatory Total number of received frames with an illegal packet length (>1518 bytes).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.1.1.3`

gnFastEthernetMonStdHiTable

table mandatory

.1.3.6.1.4.1.2281.4.6.2 · 1 row entry · 6 columns

Open in standard view

This table contains the 32 high bits (MSB) of RFC1213 statistics
for Fast Ethernet.

gnFastEthernetMonStdHiEntry entry .1.3.6.1.4.1.2281.4.6.2.1

This is an entry in the Fast Ethernet
Standard Statistics Table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnFastEthernetMonStdHiInOctetsHC mandatory The 32 MSB of The total number of octets received on the interface, including framing characters.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.1`
gnFastEthernetMonStdHiInUcastPktsHC mandatory The 32 MSB of The number of subnetwork-unicast packets delivered to a higher-layer protocol.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.2`
gnFastEthernetMonStdHiInNUcastPktsHC mandatory The 32 MSB of The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.3`
gnFastEthernetMonStdHiOutOctetsHC mandatory The 32 MSB of The total number of octets transmitted out of the interface, including framing characters.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.4`
gnFastEthernetMonStdHiOutUcastPktsHC mandatory The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.5`
gnFastEthernetMonStdHiOutNUcastPktsHC mandatory The 32 MSB of The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not…	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.6.2.1.6`

gnTrailCfgTable

table mandatory

.1.3.6.1.4.1.2281.4.7.1 · 1 row entry · 15 columns

Open in standard view

This table defines the configuration of the trail ports.

gnTrailCfgEntry entry .1.3.6.1.4.1.2281.4.7.1.1

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnTrailCfgTrailName mandatory

OctetStringr/w

Constraints:
range: 0-40

.1.3.6.1.4.1.2281.4.7.1.1.1

gnTrailCfgProtection mandatory

Enumerationr/w

Enumerated Values:

2	protected
3	unprotected

.1.3.6.1.4.1.2281.4.7.1.1.2

gnTrailCfgLowPathIndex mandatory

This parameter indicates the K.L.M index.
It includes 3 digits:
K - most significant digit, L - next digit,
M - last significant digit.
For E1 ports (SDH): K=1..3 ; L=1..7 ; M=1..3.
For T1 ports (Sonet): K=1..3 ; L=1.…

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.4.7.1.1.3

gnTrailCfgLowPathSide mandatory

Enumerationr/w

Enumerated Values:

2	east
3	west

.1.3.6.1.4.1.2281.4.7.1.1.4

gnTrailCfgProtectionOptions mandatory

Enumerationr/w

Enumerated Values:

2	inhibit
3	auto

.1.3.6.1.4.1.2281.4.7.1.1.5

gnTrailCfgMismatchJ2 mandatory

In case of J2 mismatch error, send alarm or send AIS.

Enumerationr/w

Enumerated Values:

2	sendAlarm
3	sendAIS
4	ignoreAlarm

.1.3.6.1.4.1.2281.4.7.1.1.6

gnTrailCfgTransmittedJ2 mandatory

This is the J2 string that would be sent.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.4.7.1.1.7

gnTrailCfgExpectedJ2 mandatory

This is the J2 string that is expected to be received.

OctetStringr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.2281.4.7.1.1.8

gnTrailCfgReversionMode mandatory

Enumerationr/w

Enumerated Values:

2	revertive
3	nonRevertive

.1.3.6.1.4.1.2281.4.7.1.1.9

gnTrailCfgProtectionUserCommand mandatory

Enumerationr/w

Enumerated Values:

2	noAction
3	switchToProtection
4	switchToWorking

.1.3.6.1.4.1.2281.4.7.1.1.10

gnTrailCfgHoldOffTime mandatory

This is the hold-off time in milliseconds.
Possible values: 0..20000, 100 mSec steps.

Integer32r/w

Constraints:
range: 0-20000

.1.3.6.1.4.1.2281.4.7.1.1.11

gnTrailCfgOscillationGuardTime mandatory

This is the oscillation guard time in seconds.
Possible values: 0..60.

Integer32r/w

Constraints:
range: 0-60

.1.3.6.1.4.1.2281.4.7.1.1.12

gnTrailCfgWaitToRestoreTime mandatory

This is the wait-to-restore time in minutes.
Possible values: 5..12.

Integer32r/w

Constraints:
range: 5-12

.1.3.6.1.4.1.2281.4.7.1.1.13

gnTrailCfgSignalLabelMismatch mandatory

In case of a V5 mismatch error, send or don't send AIS.

Enumerationr/w

Enumerated Values:

2	sendAlarm
3	sendAIS

.1.3.6.1.4.1.2281.4.7.1.1.14

gnTrailCfgBERConsAction mandatory

Enumerationr/w

Enumerated Values:

2	sendAlarm
3	sendAISDoPathProtection
4	doPathProtection

.1.3.6.1.4.1.2281.4.7.1.1.15

gnTribCfgTable

table mandatory

.1.3.6.1.4.1.2281.4.8.1 · 1 row entry · 10 columns

Open in standard view

This table defines the configuration of the virtual trails in the Trib STM-1.

gnTribCfgEntry entry .1.3.6.1.4.1.2281.4.8.1.1

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnTribCfgLowPathIndex mandatory

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.4.8.1.1.1

gnTribCfgLowPathSide mandatory

Enumerationr/w

Enumerated Values:

2	east
3	west

.1.3.6.1.4.1.2281.4.8.1.1.2

gnTribCfgProtection mandatory

Enumerationr/w

Enumerated Values:

2	protected
3	unprotected

.1.3.6.1.4.1.2281.4.8.1.1.3

gnTribCfgProtectionOptions mandatory

Enumerationr/w

Enumerated Values:

2	inhibit
3	auto

.1.3.6.1.4.1.2281.4.8.1.1.4

gnTribCfgReversionMode mandatory

Enumerationr/w

Enumerated Values:

2	revertive
3	nonRevertive

.1.3.6.1.4.1.2281.4.8.1.1.5

gnTribCfgProtectionUserCommand mandatory

Enumerationr/w

Enumerated Values:

2	noAction
3	switchToProtection
4	switchToWorking

.1.3.6.1.4.1.2281.4.8.1.1.6

gnTribCfgHoldOffTime mandatory

This is the hold-off time in milliseconds.
Possible values: 0..20000, 100 mSec steps.

Integer32r/w

Constraints:
range: 0-20000

.1.3.6.1.4.1.2281.4.8.1.1.7

gnTribCfgOscillationGuardTime mandatory

This is the oscillation guard time in seconds.
Possible values: 0..60.

Integer32r/w

Constraints:
range: 0-60

.1.3.6.1.4.1.2281.4.8.1.1.8

gnTribCfgWaitToRestoreTime mandatory

This is the wait-to-restore time in minutes.
Possible values: 5..12.

Integer32r/w

Constraints:
range: 5-12

.1.3.6.1.4.1.2281.4.8.1.1.9

gnTribCfgKLM mandatory

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.4.8.1.1.10

gnTrailPassThroughTable

table mandatory

.1.3.6.1.4.1.2281.4.9.1 · 1 row entry · 2 columns

Open in standard view

This table defines the configuration of the virtual trails in the Trib STM-1. It is applicable for ADM

gnTrailPassThroughEntry entry .1.3.6.1.4.1.2281.4.9.1.1

Indexes

gnTrailPassThroughIndex

Column	Syntax	OID
gnTrailPassThroughIndex mandatory This is the index of Trail Pass-Through Table. SDH(1-63), Sonet (1-84).	Integer32 Constraints: `range: 1-84`	`.1.3.6.1.4.1.2281.4.9.1.1.1`
gnTrailPassThroughName mandatory for NMS use	OctetStringr/w Constraints: `range: 0-40`	`.1.3.6.1.4.1.2281.4.9.1.1.2`

gnGigabitEthernetCfgTable

table mandatory

.1.3.6.1.4.1.2281.4.10.1 · 1 row entry · 22 columns

Open in standard view

This table defines the configuration of the Gigabit Ethernet port.

gnGigabitEthernetCfgEntry entry .1.3.6.1.4.1.2281.4.10.1.1

This is an entry in the Gigabit Ethernet configuration table.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnGigabitEthernetCfgPauseFrameGenerating mandatory

This parameter defines the option to generate pause frames when the Tx FIFO reaches his
threshold level (enable) or to (when disabled) stop generate pause frame.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.1

gnGigabitEthernetCfgMuteOnExcError mandatory

This parameter defines whether to mute GBE Tx on excessive BER.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.2

gnGigabitEthernetCfgMuteOnSd mandatory

This parameter defines whether to mute GBE Tx port on signal degrade.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.3

gnGigabitEthernetCfgMuteOnRemoteRadioFault mandatory

This parameter defines whether to mute GBE Tx port on exe error.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.4

gnGigabitEthernetCfgSpeedAndDuplex mandatory

This parameter defines the speed and duplex of the gigabit port, this parameter is not relevant when using
an electric SFP giga line interface.

Enumerationr/w

Enumerated Values:

2	autoNegotiation
3	thousandBasedFullDuplex
4	thousandBasedHalfDuplex
5	hundredBasedFullDuplex
6	hundredBasedHalfDuplex
7	tenBasedFullDuplex
8	tenBasedHalfDuplex

.1.3.6.1.4.1.2281.4.10.1.1.5

gnGigabitEthernetCfgSchedulerPriorityOption mandatory

This parameter defines the algorithm, which the Ethernet packets are taken from the 4 queues.
Strict - The Packets are taken according to strict order (from queue #1 till queue #4).
HRR - Hierarchal Round Robin - the Et…

Enumerationr/w

Enumerated Values:

2	strict
3	hrr

.1.3.6.1.4.1.2281.4.10.1.1.6

gnGigabitEthernetCfgSchedulerQueue1Weight mandatory

This parameter set the weight of the queue.

Enumerationr/w

Enumerated Values:

strict

.1.3.6.1.4.1.2281.4.10.1.1.7

gnGigabitEthernetCfgSchedulerQueue2Weight mandatory

This parameter set the weight of the queue.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2281.4.10.1.1.8

gnGigabitEthernetCfgSchedulerQueue3Weight mandatory

This parameter set the weight of the queue.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2281.4.10.1.1.9

gnGigabitEthernetCfgSchedulerQueue4Weight mandatory

This parameter set the weight of the queue.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.2281.4.10.1.1.10

gnGigabitEthernetCfgClassifierFirstPrioUDP mandatory

This parameter set the administrative status for priority override to UDP packets.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.11

gnGigabitEthernetCfgClassifierPrioBitSource mandatory

This parameter set the administrative status for priority bits source.

Enumerationr/w

Enumerated Values:

2	none
3	externalOverhead
4	vlan
5	ip
6	mpls

.1.3.6.1.4.1.2281.4.10.1.1.12

gnGigabitEthernetCfgClassifierGroupMinVlanId mandatory

This parameter set the minimum VLAN Id for the current group.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.2281.4.10.1.1.13

gnGigabitEthernetCfgClassifierGroupMaxVlanId mandatory

This parameter set the maximum VLAN Id for the current group.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.2281.4.10.1.1.14

gnGigabitEthernetCfgClassifierGroupVlanPriority mandatory

This parameter set the VLAN priority for the current group.

Enumerationr/w

Enumerated Values:

0	clear
1	queue1
2	queue2
3	queue3
4	queue4

.1.3.6.1.4.1.2281.4.10.1.1.15

gnGigabitEthernetCfgClassifierGroupVlanSet mandatory

This parameter release the agent to configure the current group.

Enumerationr/w

Enumerated Values:

2	active
3	notActive

.1.3.6.1.4.1.2281.4.10.1.1.16

gnGigabitEthernetCfgAcmMuteOnMinConstellation mandatory

This parameter defines on which constellation to mute the GBE Tx port.

Enumerationr/w

Enumerated Values:

2	acm4QAM
3	acm8QAM
4	acm16QAM
5	acm32QAM
6	acm64QAM
7	acm128QAM
8	acm256QAM

.1.3.6.1.4.1.2281.4.10.1.1.17

gnGigabitEthernetCfgEnableAutomaticTxMute mandatory

This parameter enable\disable automatic Tx mute by system.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.18

gnGigabitEthernetCfgTrafficBISTAdmin mandatory

This parameter activate\deactivate GBE traffic test.

Enumerationr/w

Enumerated Values:

2	active
3	notActive

.1.3.6.1.4.1.2281.4.10.1.1.19

gnGigabitEthernetCfgClearStatistics mandatory

This parameter clear the gigabit ethernet statistics.

Enumerationr/w

Enumerated Values:

2	noAction
3	clear

.1.3.6.1.4.1.2281.4.10.1.1.20

gnGigabitEthernetCfgPauseFrameForwarding mandatory

This parameter define if pause frame are forward.
if enable pause frame are forward to the user application.
if disable pause frame are terminated.

Enumerationr/w

Enumerated Values:

2	enable
3	disable

.1.3.6.1.4.1.2281.4.10.1.1.21

gnGigabitEthernetCfgPhyLoopback mandatory

This parameter enable disable PHY internal loopback.

Enumerationr/w

Enumerated Values:

2	noloopback
3	interfaceInterLoop

.1.3.6.1.4.1.2281.4.10.1.1.22

gnVlanEthernetStatTable

table mandatory

.1.3.6.1.4.1.2281.4.11.1 · 1 row entry · 4 columns

Open in standard view

This table illustrate the VLAN configuration.

gnVlanEthernetStatEntry entry .1.3.6.1.4.1.2281.4.11.1.1

This is an entry in the Vlan configuration status table.

Indexes

RFC1213-MIBifIndex gnVlanEthernetStatGroupId

Column Syntax OID

gnVlanEthernetStatGroupId mandatory

This parameter illustrate the VLAN group #.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.2281.4.11.1.1.1

gnVlanEthernetStatMinVlanId mandatory

This parameter illustrate the minimum VLAN id # of a specific group.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.2281.4.11.1.1.2

gnVlanEthernetStatMaxVlanId mandatory

This parameter illustrate the maximum VLAN id # of a specific group.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.2281.4.11.1.1.3

gnVlanEthernetStatVlanPriority mandatory

This parameter illustrate the priority of a specific VLAN group.

Enumeration

Enumerated Values:

1	queue1
2	queue2
3	queue3
4	queue4

.1.3.6.1.4.1.2281.4.11.1.1.4

gnGigabitEthernetStatTable

table mandatory

.1.3.6.1.4.1.2281.4.12.1 · 1 row entry · 4 columns

Open in standard view

The Gigabit Ethernet status table.

gnGigabitEthernetStatEntry entry .1.3.6.1.4.1.2281.4.12.1.1

This is an entry in the Gigabit Ethernet status table.

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnGigabitEthernetStatBistErrorSeconds mandatory

Traffic BIST results (error seconds)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2281.4.12.1.1.1

gnGigabitEthernetStatSpeedAndDuplexSupport mandatory

This field is used only by the element management application.
bit #7 - 1 auto negotiation is supported 0 otherwise (MSB).
bit #6 - 1 1000 full is supported 0 otherwise.
bit #5 - 1 1000 half is supported 0 otherwise.
bi…

OctetString

Constraints:
range: 1-1

.1.3.6.1.4.1.2281.4.12.1.1.2

gnGigabitEthernetStatValidIntervals mandatory

The number of previous valid intervals for which valid data has been stored
for the specific GBE interface.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2281.4.12.1.1.3

gnGigabitEthernetStatSpeedAndDuplexMode mandatory

Current speed and duplex mode of the giga port.

Enumeration

Enumerated Values:

3	thousandBasedFullDuplex
4	thousandBasedHalfDuplex
5	hundredBasedFullDuplex
6	hundredBasedHalfDuplex
7	tenBasedFullDuplex
8	tenBasedHalfDuplex

.1.3.6.1.4.1.2281.4.12.1.1.4

gnGigabitEthernetMonCurrTable

table mandatory

.1.3.6.1.4.1.2281.4.13.1 · 1 row entry · 4 columns

Open in standard view

This table maintains the PM for the gigabit ethernet table.

gnGigabitEthernetMonCurrEntry entry .1.3.6.1.4.1.2281.4.13.1.1

This is an entry in the PDH
Counters Table. This table contains an interface index for every interface
which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573).

Indexes

RFC1213-MIBifIndex

Column Syntax OID

gnGigabitEthernetMonCurrPacketErrorRate mandatory

The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
starting from the present 15 minute period, the calculation is in percent.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.2281.4.13.1.1.1

gnGigabitEthernetMonCurrIDF mandatory

IDF = Invalid Data Flag in current 15 minutes interval.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.13.1.1.2

gnGigabitEthernetMonCurrDayPacketErrorRate mandatory

The packet error rate ( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
starting from the present 24 hour period, the calculation is in percent.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.2281.4.13.1.1.3

gnGigabitEthernetMonCurrDayIDF mandatory

IDF = Invalid Data Flag in current 24 hour interval.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.13.1.1.4

gnGigabitEthernetMonIntervalTable

table mandatory

.1.3.6.1.4.1.2281.4.13.2 · 1 row entry · 3 columns

Open in standard view

This table maintains the PM of the GBE per interval.

gnGigabitEthernetMonIntervalEntry entry .1.3.6.1.4.1.2281.4.13.2.1

This is an entry in the GBE PM Table. This table contains an interface index for every interface
which type is GBE(VAL_ifType_ethernetCsmacd-6, according to RFC1573).
This table is indexed by an interval index, between …

Indexes

RFC1213-MIBifIndex gnGigabitEthernetMonIntervalIdx

Column Syntax OID

gnGigabitEthernetMonIntervalIdx mandatory

This table is indexed per interval number. Each interval
is of 15 minutes and the oldest is 96.

Integer32

Constraints:
range: 0-96

.1.3.6.1.4.1.2281.4.13.2.1.1

gnGigabitEthernetMonIntervalPacketErrorRate mandatory

The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
per 15 minutes interval, the calculation is in percent.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.2281.4.13.2.1.2

gnGigabitEthernetMonIntervalIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.13.2.1.3

gnGigabitEthernetMonDayTable

table mandatory

.1.3.6.1.4.1.2281.4.13.3 · 1 row entry · 3 columns

Open in standard view

This table maintains the PM of the GBE per 24 hours interval.

gnGigabitEthernetMonDayEntry entry .1.3.6.1.4.1.2281.4.13.3.1

Indexes

RFC1213-MIBifIndex gnGigabitEthernetMonDayIdx

Column Syntax OID

gnGigabitEthernetMonDayIdx mandatory

This table is indexed per interval number. Each interval
is of 24 hours and the oldest is 30.

Integer32

Constraints:
range: 1-30

.1.3.6.1.4.1.2281.4.13.3.1.1

gnGigabitEthernetMonDayPacketErrorRate mandatory

The packet error rate per interval( 100*RadioReceivedCrcFrame/(RadioReceivedFrame) )
per 24 hour interval, the calculation is in percent.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.2281.4.13.3.1.2

gnGigabitEthernetMonDayIDF mandatory

IDF = Invalid Data Flag.

Enumeration

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.2281.4.13.3.1.3

gnEthStatisticTable

table mandatory

.1.3.6.1.4.1.2281.4.14.1 · 1 row entry · 30 columns

Open in standard view

This table illustrate the gigabit ethernet statistics.

gnEthStatisticEntry entry .1.3.6.1.4.1.2281.4.14.1.1

This is an entry in the gigabit ethernet statistics table.
This table illustrate the MSB value of the RMON II statistics.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
gnEthStatisticIfInOctetsMsb mandatory The total number of octets received on the interface, including framing characters (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.1`
gnEthStatisticAFrameReceivedOkLsb mandatory Sum of frames received without error (LSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.2`
gnEthStatisticAFrameReceivedOkMsb mandatory Sum of frames received without error (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.3`
gnEthStatisticCRCAlignErrorsMsb mandatory The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number…	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.4`
gnEthStatisticIfInUcastPktsMsb mandatory The number of subnetwork-unicast packets delivered to a higher-layer protocol (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.5`
gnEthStatisticBroadcastPktsMsb mandatory The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.6`
gnEthStatisticMulticastPktsMsb mandatory The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.7`
gnEthStatisticUndersizePktsMsb mandatory The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.8`
gnEthStatisticOversizePktsMsb mandatory The total number of packets received that were longer than 12000 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.9`
gnEthStatisticPkts64OctetMsb mandatory The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.10`
gnEthStatisticPkts65to127OctetMsb mandatory The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.11`
gnEthStatisticPkts128to255OctetMsb mandatory The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.12`
gnEthStatisticPkts256to511OctetMsb mandatory The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.13`
gnEthStatisticPkts512to1023OctetMsb mandatory The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.14`
gnEthStatisticPkts1024to1518OctetMsb mandatory The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets), (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.15`
gnEthStatisticRadioTransmitFramesLsb mandatory Sum of frame transmitted to radio (LSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.16`
gnEthStatisticRadioTransmitFramesMsb mandatory Sum of frame transmitted to radio (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.17`
gnEthStatisticDroppedPacketsLsb mandatory number of frames dropped (LSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.18`
gnEthStatisticDroppedPacketsMsb mandatory number of frames dropped (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.19`
gnEthStatisticRadioReceivedFramesLsb mandatory Sum of frames received by radio (LSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.20`
gnEthStatisticRadioReceivedFramesMsb mandatory Sum of frames received by radio (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.21`
gnEthStatisticRadioReceivedCrcFramesLsb mandatory sum of frames received with error (LSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.22`
gnEthStatisticRadioReceivedCrcFramesMsb mandatory sum of frames received with error (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.23`
gnEthStatisticRadioSyncUnlockEventsLsb mandatory sum of GFP not locked events (LSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.24`
gnEthStatisticRadioSyncUnlockEventsMsb mandatory sum of GFP not locked events (MSB)	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.25`
gnEthStatisticAFrameTransmittedOkLsb mandatory Sum of valid frames transmitted to line (LSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.26`
gnEthStatisticAFrameTransmittedOkMsb mandatory Sum of valid frames transmitted to line (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.27`
gnEthStatisticIfOutOctetsMsb mandatory The total number of octets transmitted out of the interface, including framing characters (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.28`
gnEthStatisticEtherStatsPktsMsb mandatory The total number of packets (including bad packets, broadcast packets, and multicast packets) received (MSB).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.29`
gnEthStatisticEtherStatsOctetsMsb mandatory The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).	RFC1155-SMICounter Textual Convention: RFC1155-SMICounter `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2281.4.14.1.1.30`