gnGenCfgActivateLoopback
CERAGON-MIB ·
.1.3.6.1.4.1.2281.2.1.8.1.4
Object
column
mandatory
r/w
Enumeration
This parameter controls the loop back diagnostics operations. For remote units, only SPI, MUX and MDM loopbacks are allowed.
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.2.1.8.1.4- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- gnGenCfgDeviceEntry
- Table
- gnGenCfgDeviceTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | noOperation |
3 | loopbackSPI |
5 | loopbackMDM |
6 | loopbackOuterSPI |
10 | localODUloopback |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnGenCfgDeviceId mandatory This value indicates the device table entry (local or
Remote). | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.1 |
| gnGenCfgSlipModemConnection mandatory The telephone number to which the modem will initialize a call,
upon generation of a TRAP.
The number must be entered numerically (for example 18001234567). | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.2.1.8.1.10 |
| gnGenCfgSlipSpeed mandatory The SERIAL interface baud rate. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.11 |
| gnGenCfgAlarmSeverity mandatory This field is used only by the element management
application
Every Trap severity 4 bits.
15 (MAJOR), 7 (MINOR), 3 (WARNING) and 1 (EVENT) options.
The first 4 bits ODU Power supp… | column | OctetString | .1.3.6.1.4.1.2281.2.1.8.1.12 |
| gnGenCfgODUSerialNumber mandatory This is the ODU serial number - up to 20 characters | column | OctetString | .1.3.6.1.4.1.2281.2.1.8.1.13 |
| gnGenCfgIDUSerialNumber mandatory This is the IDU serial number - up to 20 characters | column | OctetString | .1.3.6.1.4.1.2281.2.1.8.1.14 |
| gnGenCfgAlarmText mandatory The private trap text, describing the last generated trap text. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.2281.2.1.8.1.15 |
| gnGenCfgTrapSeverity mandatory The current Trap severity, describing the last generated trap
severity | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.16 |
| gnGenCfgProductType mandatory The product type. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.17 |
| gnGenCfgLeftMediumConnector mandatory For ACCESS hardware, this indicates the first (left) interface connector. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.18 |
| gnGenCfgMiddleMediumConnector mandatory For ACCESS hardware, this indicates the second (right)interface connector. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.19 |
| gnGenCfgDeviceResetPerfMon mandatory Reset performance monitoring. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.2 |
| gnGenCfgPrimaryClockSource mandatory The primary clock source, configurable for ACCESS radios only. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.20 |
| gnGenCfgSecondaryClockSource mandatory The secondary clock source, configurable for ACCESS radios only. | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.21 |
| gnGenCfgTrapOption mandatory This item defines various trap options (0-31):
0 - SNSN (STANDARD TRAPS DO NOT INCLUDE SERIAL NUMBER)
1 - ASN (ALL TRAPS INCLUDE SERIAL NUMBER)
2 - SNSN, DNLR (DO … | column | Integer32 | .1.3.6.1.4.1.2281.2.1.8.1.22 |
| gnGenCfgCLLI mandatory Common Language Location Identifier (maximum length: 30) | column | OctetString | .1.3.6.1.4.1.2281.2.1.8.1.23 |
| gnGenCfgHeartbeatPeriod mandatory This item defines the number of minutes between each trap | column | Integer32 | .1.3.6.1.4.1.2281.2.1.8.1.24 |
| gnGenCfgGetRemoteData mandatory . | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.25 |
| gnGenCfgClearLoopTimeout mandatory This item defines the clear loopbacks timeout in minutes.
possible values: 0..1440.
0 means disable. | column | Integer32 | .1.3.6.1.4.1.2281.2.1.8.1.26 |
| gnGenCfgSubProductType mandatory lsb bit: 1 if 1500i or 1528i 0 otherwise. | column | Integer32 | .1.3.6.1.4.1.2281.2.1.8.1.27 |
| gnGenCfgDeviceOperation mandatory This parameter allows the NMS to perform operations.
(3) will implement software RESET
(4) will SET all factory default configurations, including IP address!
(5) will CLEAR IDU so… | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.3 |
| gnGenCfgF1DataChanConnector mandatory This is the physical interface of the F1 line data channel
(USER CHANNEL connection). | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.5 |
| gnGenCfgWaySideConnector mandatory This is the physical interface of the radio E1 way side channel
(WAYSIDE CHANNEL connection). | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.6 |
| gnGenCfgActivateChanLoopback mandatory This parameter controls the USER CHANNEL and WAYSIDE channel
loopback diagnostic operations.
(3) will activate the 64k data channel loopback (USER CHANNEL)
(4) will activate the W… | column | Enumeration | .1.3.6.1.4.1.2281.2.1.8.1.7 |
| gnGenCfgInterLenLocalOnly mandatory This field is the FEC interleaver length .DONT CAHNGE THIS FIELD !!! .
WRITE will change the local side only. | column | Integer32 | .1.3.6.1.4.1.2281.2.1.8.1.8 |
| gnGenCfgSlipIp mandatory This is the SERIAL interface IP address.
Included for future development, not currently supported. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2281.2.1.8.1.9 |