gnRstCfgTransmittedJ0
CERAGON-MIB ·
.1.3.6.1.4.1.2281.3.2.3.1.1.1
Object
column
mandatory
r/w
OctetString
This is the J0 string that would be sent. This string must be 15 characters in length.
Context
- MIB
- CERAGON-MIB
- OID
.1.3.6.1.4.1.2281.3.2.3.1.1.1- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- gnRstCfgEntry
- Table
- gnRstCfgTable
- Siblings
- 14
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gnRstCfgMngByteLocation mandatory This parameter indicates which media specific bytes are in use and which
are transparent.
not currently supported | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.10 |
| gnRstCfgE1waysideChannel mandatory If this parameter is enabled, an E1 wayside channel will be sent
through the network using the unused bytes in the SDH header. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.11 |
| gnRstCfgTransparencyDCCR mandatory Transmit on the DCCR channel or terminate the DCCR channel. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.12 |
| gnRstCfgTransparencyB1Chan mandatory Correct B1 byte or send transmit it transparently . | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.13 |
| gnRstCfgTestActivate mandatory This field allows the NMS to activate the
following tests:
bit 1 = 1 Force AIS
bit 2 = 1 Force RDI. | column | OctetString | .1.3.6.1.4.1.2281.3.2.3.1.1.14 |
| gnRstCfgLoopbackOption mandatory This parameter enable the user to activate a loopback . | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.15 |
| gnRstCfgExpectedJ0 mandatory This is the J0 string that is expected to be received. This string must be
15 characters in length. | column | OctetString | .1.3.6.1.4.1.2281.3.2.3.1.1.2 |
| gnRstCfgTransparencyJ0 mandatory Send the received J0 string transparently or send the Transmitted J0
configured string. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.3 |
| gnRstCfgRSTAISMode mandatory In the case of a J0 mismatch error, send or don't send AIS. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.4 |
| gnRstCfgRstEXCThresh mandatory If the bit error rate is higher than this threshold
an EXC alarm would be generated.
EXC is for excessive. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.5 |
| gnRstCfgRstSDThresh mandatory If the bit error rate is higher than this threshold
a SD alarm would be generated.
SD is for Signal Degrade. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.6 |
| gnRstCfgTransparencyE1 mandatory Transmit the order wire data received or terminate the E1 data received. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.7 |
| gnRstCfgTransparencyF1 mandatory Transmit the F1/User channel data received or terminate the F1/User channel data received.
set the TransparencyF1 to disable when the User channel used by In-Band management. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.8 |
| gnRstCfgTransparencyUnscrambled mandatory Transmit the unscrambled national bytes data received or terminate the
unscrambled national bytes data received. | column | Enumeration | .1.3.6.1.4.1.2281.3.2.3.1.1.9 |